- 29 Oct, 2021 22 commits
-
-
Vasundhara Volam authored
Firmware sets compression flags for each segment, add this information while filling segment header. Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edwin Peer authored
Change bnxt_get_coredump() and bnxt_get_coredump_length() to non-static functions. Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
-
Edwin Peer authored
The coredump functionality will be used by devlink health. Refactor these functions that get coredump and coredump length. There is no functional change, but the following checkpatch warnings were addressed: - strscpy is preferred over strlcpy. - sscanf results should be checked, with an additional warning. Signed-off-by:
-
Edwin Peer authored
Add firmware event counters as well as health state severity. In the unhealthy state, recommend a remedy and inform the user as to its impact. Readability of the devlink tool's output is negatively impacted by adding these fields to the diagnosis. The single line of text, as rendered by devlink health diagnose, benefits from more terse descriptions, which can be substituted without loss of clarity, even in pretty printed JSON mode. Signed-off-by:
-
Edwin Peer authored
Merge 'fw' and 'fw_fatal' health reporters. There is no longer a need to distinguish between firmware reporters. Only bonafide errors are reported now and no reports were being generated for the 'fw' reporter. Signed-off-by:
-
Edwin Peer authored
Firmware resets initiated by the user are not errors and should not be reported via devlink. Once only unsolicited resets remain, it is no longer sensible to maintain a separate fw_reset reporter. Signed-off-by:
-
Edwin Peer authored
The recovery election messages are often mistaken for errors. Improve the wording to clarify the meaning of these frequent and expected events. Also, take the first step towards more inclusive language. Signed-off-by:
-
Edwin Peer authored
The reported parameter value should not take into account the state of remote drivers. Firmware will reject remote resets as appropriate, thus it is not strictly necessary to check HOT_RESET_ALLOWED before attempting to initiate a reset. But we add the check so that we can provide more intuitive messages when reset is not permitted. This firmware setting needs to be restored from all functions after a firmware reset. Signed-off-by:
-
Edwin Peer authored
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by:
-
Edwin Peer authored
The RTNL lock must be held between down and up to prevent interleaving state changes, especially since external state changes might release and allocate different driver resource subsets that would otherwise need to be tracked and carefully handled. If the down function fails, then devlink will not call the corresponding up function, thus the lock is released in the down error paths. v2: Don't use devlink_reload_disable() and devlink_reload_enable(). Instead, check that the netdev is not in unregistered state before proceeding with reload. Signed-off-by:
-
Edwin Peer authored
Resource reservations will also need to be reset after FUNC_DRV_UNRGTR in the following devlink driver_reinit patch. Extract this logic into a reusable function. Signed-off-by:
-
Edwin Peer authored
The device info logged during probe will be reused by the devlink driver_reinit code in a following patch. Extract this logic into the new bnxt_print_device_info() function. The board index needs to be saved in the driver context so that the board information can be retrieved at a later time, outside of the probe function. Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Code movement to br_switchdev.c This is one more refactoring patch set for the Linux bridge, where more logic that is specific to switchdev is moved into br_switchdev.c, which is compiled out when CONFIG_NET_SWITCHDEV is disabled. ==================== Link: https://lore.kernel.org/r/20211027162119.2496321-1-vladimir.oltean@nxp.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Rename all recently imported functions in br_switchdev.c to start with a br_switchdev_* prefix. br_fdb_replay_one() -> br_switchdev_fdb_replay_one() br_fdb_replay() -> br_switchdev_fdb_replay() br_vlan_replay_one() -> br_switchdev_vlan_replay_one() br_vlan_replay() -> br_switchdev_vlan_replay() struct br_mdb_complete_info -> struct br_switchdev_mdb_complete_info br_mdb_complete() -> br_switchdev_mdb_complete() br_mdb_switchdev_host_port() -> br_switchdev_host_mdb_one() br_mdb_switchdev_host() -> br_switchdev_host_mdb() br_mdb_replay_one() -> br_switchdev_mdb_replay_one() br_mdb_replay() -> br_switchdev_mdb_replay() br_mdb_queue_one() -> br_switchdev_mdb_queue_one() Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Vladimir Oltean authored
The following functions: br_mdb_complete br_switchdev_mdb_populate br_mdb_replay_one br_mdb_queue_one br_mdb_replay br_mdb_switchdev_host_port br_mdb_switchdev_host br_switchdev_mdb_notify are only accessible from code paths where CONFIG_NET_SWITCHDEV is enabled. So move them to br_switchdev.c, in order for that code to be compiled out if that config option is disabled. Note that br_switchdev.c gets build regardless of whether CONFIG_BRIDGE_IGMP_SNOOPING is enabled or not, whereas br_mdb.c only got built when CONFIG_BRIDGE_IGMP_SNOOPING was enabled. So to preserve correct compilation with CONFIG_BRIDGE_IGMP_SNOOPING being disabled, we must now place an #ifdef around these functions in br_switchdev.c. The offending bridge data structures that need this are br->multicast_lock and br->mdb_list, these are also compiled out of struct net_bridge when CONFIG_BRIDGE_IGMP_SNOOPING is turned off. Signed-off-by:
-
Vladimir Oltean authored
Similar to fdb_notify() and br_switchdev_fdb_notify(), split the switchdev specific logic from br_mdb_notify() into a different function. This will be moved later in br_switchdev.c. Signed-off-by:
-
Vladimir Oltean authored
br_vlan_replay() is relevant only if CONFIG_NET_SWITCHDEV is enabled, so move it to br_switchdev.c. Signed-off-by:
-
Vladimir Oltean authored
br_vlan_replay() needs this, and we're preparing to move it to br_switchdev.c, which will be compiled regardless of whether or not CONFIG_BRIDGE_VLAN_FILTERING is enabled. Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Offload root TBF as port shaper Petr says: Egress configuration in an mlxsw deployment would generally have an ETS qdisc at root, with a number of bands and a priority dispatch between them. Some of those bands could then have a RED and/or TBF qdiscs attached. When TBF is used like this, mlxsw configures shaper on a subgroup, which is the pair of traffic classes (UC + BUM) corresponding to the band where TBF is installed. This way it is possible to limit traffic on several bands (subgroups) independently by configuring several TBF qdiscs, each on a different band. It is however not possible to limit traffic flowing through the port as such. The ASIC supports this through port shapers (as opposed to the abovementioned subgroup shapers). An obvious way to express this as a user would be to configure a root TBF qdisc, and then add the whole ETS hierarchy as its child. TBF (and RED) can currently be used as a root qdisc. This usage has always been accepted as a special case, when only one subgroup is configured, and that is the subgroup that root TBF and RED configure. However it was never possible to install ETS under that TBF. In this patchset, this limitation is relaxed. TBF qdisc in root position is now always offloaded as a port shaper. Such TBF qdisc does not limit offload of further children. It is thus possible to configure the usual priority classification through ETS, with RED and/or TBF on individual bands, all that below a port-level TBF. For example: (1) # tc qdisc replace dev swp1 root handle 1: tbf rate 800mbit burst 16kb limit 1M (2) # tc qdisc replace dev swp1 parent 1:1 handle 11: ets strict 8 priomap 7 6 5 4 3 2 1 0 (3) # tc qdisc replace dev swp1 parent 11:1 handle 111: tbf rate 600mbit burst 16kb limit 1M (4) # tc qdisc replace dev swp1 parent 11:2 handle 112: tbf rate 600mbit burst 16kb limit 1M Here, (1) configures a 800-Mbps port shaper, (2) adds an ETS element with 8 strictly-prioritized bands, and (3) and (4) configure two more shapers, each 600 Mbps, one under 11:1 (band 0, TCs 7 and 15), one under 11:2 (band 1, TCs 6 and 14). This way, traffic on bands 0 and 1 are each independently capped at 600 Mbps, and at the same time, traffic through the port as a whole is capped at 800 Mbps. In patch #1, TBF is permitted as root qdisc, under which the usual qdisc tree can be installed. In patch #2, the qdisc offloadability selftest is extended to cover the root TBF as well. Patch #3 then tests that the offloaded TBF shapes as expected. ==================== Link: https://lore.kernel.org/r/20211027152001.1320496-1-idosch@idosch.orgSigned-off-by: -
Petr Machata authored
TBF can be used as a root qdisc, in which case it is supposed to configure port shaper. Add a test that verifies that this is so by installing a root TBF with a ETS or PRIO below it, and then expecting individual bands to all be shaped according to the root TBF configuration. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Petr Machata authored
TBF can be used as a root qdisc, with the usual ETS/RED/TBF hierarchy below it. This use should now be offloaded. Add a test that verifies that it is. Signed-off-by:
-
Petr Machata authored
The Spectrum ASIC allows configuration of maximum shaper on all levels of the scheduling hierarchy: TCs, subgroups, groups and also ports. Currently, TBF always configures a subgroup. But a user could reasonably express the intent to configure port shaper by putting TBF to a root position, around ETS / PRIO. Accept this usage and offload appropriately. Signed-off-by:
-
- 28 Oct, 2021 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
include/net/sock.h 7b50ecfc ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0 ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from WiFi (mac80211), and BPF. Current release - regressions: - skb_expand_head: adjust skb->truesize to fix socket memory accounting - mptcp: fix corrupt receiver key in MPC + data + checksum Previous releases - regressions: - multicast: calculate csum of looped-back and forwarded packets - cgroup: fix memory leak caused by missing cgroup_bpf_offline - cfg80211: fix management registrations locking, prevent list corruption - cfg80211: correct false positive in bridge/4addr mode check - tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing previous verdict Previous releases - always broken: - sctp: enhancements for the verification tag, prevent attackers from killing SCTP sessions - tipc: fix size validations for the MSG_CRYPTO type - mac80211: mesh: fix HE operation element length check, prevent out of bound access - tls: fix sign of socket errors, prevent positive error codes being reported from read()/write() - cfg80211: scan: extend RCU protection in cfg80211_add_nontrans_list() - implement ->sock_is_readable() for UDP and AF_UNIX, fix poll() for sockets in a BPF sockmap - bpf: fix potential race in tail call compatibility check resulting in two operations which would make the map incompatible succeeding - bpf: prevent increasing bpf_jit_limit above max - bpf: fix error usage of map_fd and fdget() in generic batch update - phy: ethtool: lock the phy for consistency of results - prevent infinite while loop in skb_tx_hash() when Tx races with driver reconfiguring the queue <> traffic class mapping - usbnet: fixes for bad HW conjured by syzbot - xen: stop tx queues during live migration, prevent UAF - net-sysfs: initialize uid and gid before calling net_ns_get_ownership - mlxsw: prevent Rx stalls under memory pressure" * tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) Revert "net: hns3: fix pause config problem after autoneg disabled" mptcp: fix corrupt receiver key in MPC + data + checksum riscv, bpf: Fix potential NULL dereference octeontx2-af: Fix possible null pointer dereference. octeontx2-af: Display all enabled PF VF rsrc_alloc entries. octeontx2-af: Check whether ipolicers exists net: ethernet: microchip: lan743x: Fix skb allocation failure net/tls: Fix flipped sign in async_wait.err assignment net/tls: Fix flipped sign in tls_err_abort() calls net/smc: Correct spelling mistake to TCPF_SYN_RECV net/smc: Fix smc_link->llc_testlink_time overflow nfp: bpf: relax prog rejection for mtu check through max_pkt_offset vmxnet3: do not stop tx queues after netif_device_detach() r8169: Add device 10ec:8162 to driver r8169 ptp: Document the PTP_CLK_MAGIC ioctl number usbnet: fix error return code in usbnet_probe() net: hns3: adjust string spaces of some parameters of tx bd info in debugfs net: hns3: expand buffer len for some debugfs command net: hns3: add more string spaces for dumping packets number of queue info in debugfs net: hns3: fix data endian problem of some functions of debugfs ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of final driver specific fixes for v5.15, one fixing potential ID collisions between two instances of the Altera driver and one making Microwire full duplex mode actually work on pl022" * tag 'spi-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spl022: fix Microwire full duplex mode spi: altera: Change to dynamic allocation of spi id
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fix from Mark Brown: "This fixes a potential double free when handling an out of memory error inserting a node into an rbtree regcache" * tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Fix possible double-free in regcache_rbtree_exit()
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: "I overlooked Guenters request to sent this upstream earlier, so it's a bit late in the release cycle. This contains: - Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout" - sbsa: only use 32-bit accessors - sbsa: drop unneeded MODULE_ALIAS - ixp4xx_wdt: Fix address space warning - Fix OMAP watchdog early handling" * tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Fix OMAP watchdog early handling watchdog: ixp4xx_wdt: Fix address space warning watchdog: sbsa: drop unneeded MODULE_ALIAS watchdog: sbsa: only use 32-bit accessors Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout" -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Do not WARN when attaching event probe to non-existent event If the user tries to attach an event probe (eprobe) to an event that does not exist, it will trigger a warning. There's an error check that only expects memory issues otherwise it is considered a bug. But changes in the code to move around the locking made it that it can error out if the user attempts to attach to an event that does not exist, returning an -ENODEV. As this path can be caused by user space putting in a bad value, do not trigger a WARN" * tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not warn when connecting eprobe to non existing event
-
Guangbin Huang authored
This reverts commit 3bda2e5d. According to discussion with Andrew as follow: https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/ HNS3 driver needs to separate pause autoneg from general autoneg, so revert this incorrect patch. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.comSigned-off-by:
-
Davide Caratti authored
using packetdrill it's possible to observe that the receiver key contains random values when clients transmit MP_CAPABLE with data and checksum (as specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid using the skb extension copy when writing the MP_CAPABLE sub-option. Fixes: d7b26908 ("mptcp: shrink mptcp_out_options struct") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233Reported-by:
Poorva Sonparote <psonparo@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Björn Töpel authored
The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. Fixes: ca6cb544 ("riscv, bpf: Factor common RISC-V JIT code") Signed-off-by:
Björn Töpel <bjorn@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20211028125115.514587-1-bjorn@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Even though the current code uses dev->addr_len the we can switch to eth_hw_addr_set() instead of dev_addr_set(). The netdev is always allocated by alloc_etherdev_mq() and there are at least two places which assume Ethernet address: - the line below calling eth_hw_addr_random() - virtnet_set_mac_address() -> eth_commit_mac_addr_change() Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027152012.3393077-1-kuba@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Reduce extra indirection from devlink_params_*() API. Such change makes it clear that we can drop devlink->lock from these flows, because everything is executed when the devlink is not registered yet. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
David S. Miller authored
Rakesh Babu Saladi says: ==================== RVU Debugfs updates. Patch 1: Few minor changes such as spelling mistakes, deleting unwanted characters, etc. Patch 2: Add debugfs dump for lmtst map table Patch 3: Add channel and channel mask in debugfs. Changes made from v2 to v3: 1. In patch 1 moved few lines and submitted those changes as a different patch to net branch 2. Patch 2 is left unchanged. 3. Patch 3 is left unchanged. ==================== Signed-off-by: -
Rakesh Babu authored
This patch is to dispaly channel and channel_mask for each RX interface of NPC MCAM rule. Signed-off-by:
Rakesh Babu <rsaladi2@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
Harman Kalra authored
CN10k SoCs use atomic stores of up to 128 bytes to submit packets/instructions into co-processor cores. The enqueueing is performed using Large Memory Transaction Store (LMTST) operations. They allow for lockless enqueue operations - i.e., two different CPU cores can submit instructions to the same queue without needing to lock the queue or synchronize their accesses. This patch implements a new debugfs entry for dumping LMTST map table present on CN10K, as this might be very useful to debug any issue in case of shared LMTST region among multiple pci functions. Signed-off-by:
Harman Kalra <hkalra@marvell.com> Signed-off-by:
Bhaskara Budiredla <bbudiredla@marvell.com> Signed-off-by:
-
Rakesh Babu Saladi authored
Few changes in rvu_debugfs.c file to remove unwanted characters, indenting the code, added a new comment line etc. Signed-off-by:
-
David S. Miller authored
Rakesh Babu Saladi says: ==================== RVU Debugfs fix updates. The following patch series consists of the patch fixes done over rvu_debugfs.c and rvu_nix.c files. Patch 1: Check and return if ipolicers do not exists. Patch 2: Fix rsrc_alloc to print all enabled PF/VF entries with list of LFs allocated for each functional block. Patch 3: Fix possible null pointer dereference. ==================== Signed-off-by: -
Rakesh Babu Saladi authored
This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" Fixes: 8756828a ("octeontx2-af: Add NPA aura and pool contexts to debugfs") Fixes: 9a946def ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Rakesh Babu authored
Currently, we are using a fixed buffer size of length 2048 to display rsrc_alloc output. As a result a maximum of 2048 characters of rsrc_alloc output is displayed, which may lead sometimes to display only partial output. This patch fixes this dependency on max limit of buffer size and displays all PF VF entries. Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12 characters to print the list of LFs of each block for a PF/VF. If the length of list of LFs of a block exceeds this fixed width then the list gets truncated and displays only a part of the list. This patch fixes this by using the maximum possible length of list of LFs among all blocks of all PFs and VFs entries as the width size. Fixes: f7884097 ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Fixes: 23205e6d ("octeontx2-af: Dump current resource provisioning status") Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by:
-
