Patch series 'squashfs: Add the mount parameter "threads="'.

Currently, Squashfs supports multiple decompressor parallel modes. 
However, this mode can be configured only during kernel building and does
not support flexible selection during runtime.

In the current patch set, the mount parameter "threads=" is added to allow
users to select the parallel decompressor mode and configure the number of
decompressors when mounting a file system.

"threads=<single|multi|percpu|1|2|3|...>"
The upper limit is num_online_cpus() * 2.


This patch (of 2):

Squashfs supports three decompression concurrency modes:
	Single-thread mode: concurrent reads are blocked and the memory
		overhead is small.
	Multi-thread mode/percpu mode: reduces concurrent read blocking but
		increases memory overhead.

The corresponding schema must be fixed at compile time. During mounting,
the concurrent decompression mode cannot be adjusted based on file read
blocking.

The mount parameter theads=<single|multi|percpu> is added to select
the concurrent decompression mode of a single SquashFS file system
image.

Link: https://lkml.kernel.org/r/20221019030930.130456-1-nixiaoming@huawei.com
Link: https://lkml.kernel.org/r/20221019030930.130456-2-nixiaoming@huawei.comSigned-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Jianguo Chen <chenjianguo3@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove unnecessary void* type casting.

Link: https://lkml.kernel.org/r/20221026080517.3221-1-xupengfei@nfschina.comSigned-off-by: XU pengfei <xupengfei@nfschina.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Disseldorp <ddiss@suse.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: wuchi <wuchi.zero@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If field s_log_block_size of superblock data is corrupted and too large,
init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds
warning followed by a kernel panic (if panic_on_warn is set):

 shift exponent 38973 is too large for 32-bit type 'int'
 Call Trace:
  <TASK>
  dump_stack_lvl+0xcd/0x134
  ubsan_epilogue+0xb/0x50
  __ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5
  init_nilfs.cold.11+0x18/0x1d [nilfs2]
  nilfs_mount+0x9b5/0x12b0 [nilfs2]
  ...

This fixes the issue by adding and using a new helper function for getting
block size with sanity check.

Link: https://lkml.kernel.org/r/20221027044306.42774-3-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount
time".

The first patch fixes a bug reported by syzbot, and the second one fixes
the remaining bug of the same kind.  Although they are triggered by the
same super block data anomaly, I divided it into the above two because the
details of the issues and how to fix it are different.

Both are required to eliminate the shift-out-of-bounds issues at mount
time.


This patch (of 2):

If the block size exponent information written in an on-disk superblock is
corrupted, nilfs_sb2_bad_offset helper function can trigger
shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn
is set):

 shift exponent 38983 is too large for 64-bit type 'unsigned long long'
 Call Trace:
  <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
  ubsan_epilogue lib/ubsan.c:151 [inline]
  __ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322
  nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline]
  nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523
  init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577
  nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047
  nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317
  ...

In addition, since nilfs_sb2_bad_offset() performs multiplication without
considering the upper bound, the computation may overflow if the disk
layout parameters are not normal.

This fixes these issues by inserting preliminary sanity checks for those
parameters and by converting the comparison from one involving
multiplication and left bit-shifting to one using division and right
bit-shifting.

Link: https://lkml.kernel.org/r/20221027044306.42774-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20221027044306.42774-2-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e91619dd4c11c4960706@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Do not report errors like below:

./scripts/checkpatch.pl -f drivers/net/wireless/ath/ath10k/wmi.h

ERROR: Macros with complex values should be enclosed in parentheses
+#define C2S(x) case x: return #x

since many "case ..." macros are already used by some in-kernel drivers.

Link: https://lkml.kernel.org/r/20221027134334.164301-1-stf_xl@wp.plSigned-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

syscall(3) returns -1 and sets errno on error, unlike "syscall"
instruction.

Systems which have <= 32/64 CPUs are unaffected. Test won't bounce
to all CPUs before completing if there are more of them.

Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183
Fixes: 1f5bd054 ("proc: selftests: test /proc/uptime")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions.

Link: https://lkml.kernel.org/r/20221014001911.3342485-3-helgaas@kernel.orgSigned-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

flush_register_stack() and invalidate_stacked_regs() have been removed
since commit 0aeaf6b3 ("ia64/kprobes: Remove jprobe implementation"),
so remove them.

Link: https://lkml.kernel.org/r/20220914124707.1483471-1-cuigaosheng1@huawei.comSigned-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Avoid typecasts that are needed for IS_ERR() and use IS_ERR_VALUE()
instead.

Link: https://lkml.kernel.org/r/20221020113004.400031-1-ye.xingchen@zte.com.cnSigned-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Most /proc files don't have length (in fstat sense).  This leads to
inefficiencies when reading such files with APIs commonly found in modern
programming languages.  They open file, then fstat descriptor, get st_size
== 0 and either assume file is empty or start reading without knowing
target size.

cat(1) does OK because it uses large enough buffer by default.  But naive
programs copy-pasted from SO aren't:

	let mut f = std::fs::File::open("/proc/cmdline").unwrap();
	let mut buf: Vec<u8> = Vec::new();
	f.read_to_end(&mut buf).unwrap();

will result in

	openat(AT_FDCWD, "/proc/cmdline", O_RDONLY|O_CLOEXEC) = 3
	statx(0, NULL, AT_STATX_SYNC_AS_STAT, STATX_ALL, NULL) = -1 EFAULT (Bad address)
	statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0444, stx_size=0, ...}) = 0
	lseek(3, 0, SEEK_CUR)                   = 0
	read(3, "BOOT_IMAGE=(hd3,gpt2)/vmlinuz-5.", 32) = 32
	read(3, "19.6-100.fc35.x86_64 root=/dev/m", 32) = 32
	read(3, "apper/fedora_localhost--live-roo"..., 64) = 64
	read(3, "ocalhost--live-swap rd.lvm.lv=fe"..., 128) = 116
	read(3, "", 12)

open/stat is OK, lseek looks silly but there are 3 unnecessary reads
because Rust starts with 32 bytes per Vec<u8> and grows from there.

In case of /proc/cmdline, the length is known precisely.

Make variables readonly while I'm at it.

P.S.: I tried to scp /proc/cpuinfo today and got empty file
	but this is separate story.

Link: https://lkml.kernel.org/r/YxoywlbM73JJN3r+@localhost.localdomainSigned-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The lkml.org, marc.info, spinics.net, etc archives are not quite as useful
as lore.kernel.org because they use different styles, add advertising, and
may disappear in the future.  The lore archives are more consistent and
more likely to stick around, so prefer https://lore.kernel.org URLs when
they exist.

[bhelgaas@google.com: only warn if we see "http" before the archive hostname]
  Link: https://lkml.kernel.org/r/20221114224315.GA939630@bhelgaas
Link: https://lkml.kernel.org/r/20221019202843.40810-1-helgaas@kernel.orgSigned-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Many monitoring tools include open file count as a metric.  Currently the
only way to get this number is to enumerate the files in /proc/pid/fd.

The problem with the current approach is that it does many things people
generally don't care about when they need one number for a metric.  In our
tests for cadvisor, which reports open file counts per cgroup, we observed
that reading the number of open files is slow.  Out of 35.23% of CPU time
spent in `proc_readfd_common`, we see 29.43% spent in `proc_fill_cache`,
which is responsible for filling dentry info.  Some of this extra time is
spinlock contention, but it's a contention for the lock we don't want to
take to begin with.

We considered putting the number of open files in /proc/pid/status. 
Unfortunately, counting the number of fds involves iterating the
open_files bitmap, which has a linear complexity in proportion with the
number of open files (bitmap slots really, but it's close).  We don't want
to make /proc/pid/status any slower, so instead we put this info in
/proc/pid/fd as a size member of the stat syscall result.  Previously the
reported number was zero, so there's very little risk of breaking
anything, while still providing a somewhat logical way to count the open
files with a fallback if it's zero.

RFC for this patch included iterating open fds under RCU.  Thanks to Frank
Hofmann for the suggestion to use the bitmap instead.

Previously:

```
$ sudo stat /proc/1/fd | head -n2
  File: /proc/1/fd
  Size: 0         	Blocks: 0          IO Block: 1024   directory
```

With this patch:

```
$ sudo stat /proc/1/fd | head -n2
  File: /proc/1/fd
  Size: 65        	Blocks: 0          IO Block: 1024   directory
```

Correctness check:

```
$ sudo ls /proc/1/fd | wc -l
65
```

I added the docs for /proc/<pid>/fd while I'm at it.

[ivan@cloudflare.com: use bitmap_weight() to count the bits]
  Link: https://lkml.kernel.org/r/20221018045844.37697-1-ivan@cloudflare.com
[akpm@linux-foundation.org: include linux/bitmap.h for bitmap_weight()]
[ivan@cloudflare.com: return errno from proc_fd_getattr() instead of setting negative size]
  Link: https://lkml.kernel.org/r/20221024173140.30673-1-ivan@cloudflare.com
Link: https://lkml.kernel.org/r/20220922224027.59266-1-ivan@cloudflare.comSigned-off-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Anton Mitterer <mail@christoph.anton.mitterer.name>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Currently the clamp algorithm does:

    if (val > hi)
        val = hi;
    if (val < lo)
        val = lo;

But since hi > lo by definition, this can be made more efficient with:

    if (val > hi)
        val = hi;
    else if (val < lo)
        val = lo;

So fix up the clamp and clamp_t functions to do this, adding the same
argument checking as for min and min_t.

For simple cases, code generation on x86_64 and aarch64 stay about the
same:

    before:
            cmp     edi, edx
            mov     eax, esi
            cmova   edi, edx
            cmp     edi, esi
            cmovnb  eax, edi
            ret
    after:
            cmp     edi, esi
            mov     eax, edx
            cmovnb  esi, edi
            cmp     edi, edx
            cmovb   eax, esi
            ret

    before:
            cmp     w0, w2
            csel    w8, w0, w2, lo
            cmp     w8, w1
            csel    w0, w8, w1, hi
            ret
    after:
            cmp     w0, w1
            csel    w8, w0, w1, hi
            cmp     w0, w2
            csel    w0, w8, w2, lo
            ret

On MIPS64, however, code generation improves, by removing arithmetic in
the second branch:

    before:
            sltu    $3,$6,$4
            bne     $3,$0,.L2
            move    $2,$6

            move    $2,$4
    .L2:
            sltu    $3,$2,$5
            bnel    $3,$0,.L7
            move    $2,$5

    .L7:
            jr      $31
            nop
    after:
            sltu    $3,$4,$6
            beq     $3,$0,.L13
            move    $2,$6

            sltu    $3,$4,$5
            bne     $3,$0,.L12
            move    $2,$4

    .L13:
            jr      $31
            nop

    .L12:
            jr      $31
            move    $2,$5

For more complex cases with surrounding code, the effects are a bit
more complicated. For example, consider this simplified version of
timestamp_truncate() from fs/inode.c on x86_64:

    struct timespec64 timestamp_truncate(struct timespec64 t, struct inode *inode)
    {
        struct super_block *sb = inode->i_sb;
        unsigned int gran = sb->s_time_gran;

        t.tv_sec = clamp(t.tv_sec, sb->s_time_min, sb->s_time_max);
        if (t.tv_sec == sb->s_time_max || t.tv_sec == sb->s_time_min)
            t.tv_nsec = 0;
        return t;
    }

    before:
            mov     r8, rdx
            mov     rdx, rsi
            mov     rcx, QWORD PTR [r8]
            mov     rax, QWORD PTR [rcx+8]
            mov     rcx, QWORD PTR [rcx+16]
            cmp     rax, rdi
            mov     r8, rcx
            cmovge  rdi, rax
            cmp     rdi, rcx
            cmovle  r8, rdi
            cmp     rax, r8
            je      .L4
            cmp     rdi, rcx
            jge     .L4
            mov     rax, r8
            ret
    .L4:
            xor     edx, edx
            mov     rax, r8
            ret

    after:
            mov     rax, QWORD PTR [rdx]
            mov     rdx, QWORD PTR [rax+8]
            mov     rax, QWORD PTR [rax+16]
            cmp     rax, rdi
            jg      .L6
            mov     r8, rax
            xor     edx, edx
    .L2:
            mov     rax, r8
            ret
    .L6:
            cmp     rdx, rdi
            mov     r8, rdi
            cmovge  r8, rdx
            cmp     rax, r8
            je      .L4
            xor     eax, eax
            cmp     rdx, rdi
            cmovl   rax, rsi
            mov     rdx, rax
            mov     rax, r8
            ret
    .L4:
            xor     edx, edx
            jmp     .L2

In this case, we actually gain a branch, unfortunately, because the
compiler's replacement axioms no longer as cleanly apply.

So all and all, this change is a bit of a mixed bag.

Link: https://lkml.kernel.org/r/20220926133435.1333846-2-Jason@zx2c4.comSigned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The clamp family of functions only makes sense if hi>=lo.  If hi and lo
are compile-time constants, then raise a build error.  Doing so has
already caught buggy code.  This also introduces the infrastructure to
improve the clamping function in subsequent commits.

[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: s@&&\@&& \@]
Link: https://lkml.kernel.org/r/20220926133435.1333846-1-Jason@zx2c4.comSigned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This symbol is not used outside of the file, so mark it static.

Fixes the following warning:

arch/arm/kernel/machine_kexec.c:76:6: warning: symbol 'machine_crash_nonpanic_core' was not declared. Should it be static?

Link: https://lkml.kernel.org/r/20220929042936.22012-5-bhe@redhat.comSigned-off-by: Chen Lifu <chenlifu@huawei.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Li Chen <lchen@ambarella.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We already have struct range, so just use it.

Link: https://lkml.kernel.org/r/20220929042936.22012-4-bhe@redhat.comSigned-off-by: Li Chen <lchen@ambarella.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Return the value kimage_add_entry() directly instead of storing it in
another redundant variable.

Link: https://lkml.kernel.org/r/20220929042936.22012-3-bhe@redhat.comSigned-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Li Chen <lchen@ambarella.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Some minor cleanup patches resent".

The first three patches trivial clean up patches.

And for the patch "kexec: replace crash_mem_range with range", I got a
ibm-p9wr ppc64le system to test, it works well.


This patch (of 4):

elfcorehdr_alloc() allocates a memory chunk for elfcorehdr_addr with
kzalloc().  If is_vmcore_usable() returns false, elfcorehdr_addr is a
predefined value.  If parse_crash_elf_headers() gets some error and
returns a negetive value, the elfcorehdr_addr should be released with
elfcorehdr_free().

Fix it by calling elfcorehdr_free() when parse_crash_elf_headers() fails.

Link: https://lkml.kernel.org/r/20220929042936.22012-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220929042936.22012-2-bhe@redhat.comSigned-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Li Chen <lchen@ambarella.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use bitmap_zero/bitmap_copy/bitmap_qeual directly for bitmap operations.

Link: https://lkml.kernel.org/r/20221007124846.186453-3-joseph.qi@linux.alibaba.comSigned-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pass bits directly into fill_node_map helper and use bitmap API directly
to simplify code.

Link: https://lkml.kernel.org/r/20221007124846.186453-2-joseph.qi@linux.alibaba.comSigned-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use bitmap_zero/bitmap_copy/bitmap_equal directly for bitmap operations.

Link: https://lkml.kernel.org/r/20221007124846.186453-1-joseph.qi@linux.alibaba.comSigned-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use str_enabled_disabled() helper instead of open coding the same.

Link: https://lkml.kernel.org/r/20221008195914.54199-1-andriy.shevchenko@linux.intel.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

try_cmpxchg implicitly assigns old head->first value to "first" when
cmpxchg fails. There is no need to re-read the value in the loop.

Link: https://lkml.kernel.org/r/20221017145226.4044-1-ubizjak@gmail.comSigned-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.

Link: https://lkml.kernel.org/r/20221013214638.30953-1-palmer@rivosinc.comReported-by: Conor Dooley <conor.dooley@microchip.com>
  Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The variable num is being assigned a value that is never read, it is being
re-assigned a new value in both paths if an if-statement.  The assignment
is redundant and can be removed.

Cleans up clang scan build warning:
lib/oid_registry.c:149:3: warning: Value stored to 'num' is
never read [deadcode.DeadStores]

Link: https://lkml.kernel.org/r/20221017214556.863357-1-colin.i.king@gmail.comSigned-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Statistically, in a large deployment regular segfaults may indicate a CPU
issue.

Currently, it is not possible to find out what CPU the segfault happened
on.  There are at least two attempts to improve segfault logging with this
regard, but they do not help in case the logs rotate.

Hence, lets make sure it is possible to permanently record a CPU the task
ran on using a new core_pattern specifier.

Link: https://lkml.kernel.org/r/20220903064330.20772-1-oleksandr@redhat.comSigned-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Suggested-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Grzegorz Halat <ghalat@redhat.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() apparently cannot fail and so always returns 0.
Let's make this function return *void* instead of *int*...

Link: https://lkml.kernel.org/r/20221014212235.10770-14-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-13-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-12-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

[akpm@linux-foundation.org: fix gpr32_set_common()]
Link: https://lkml.kernel.org/r/20221014212235.10770-11-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-10-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-9-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-8-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-7-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-6-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-5-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Link: https://lkml.kernel.org/r/20221014212235.10770-4-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-3-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Make user_regset_copyin_ignore() *void*".

user_regset_copyin_ignore() apparently cannot fail and so always returns 0.
Let's first remove the result checks in several architectures that call this
function and then make user_regset_copyin_ignore() return *void* instead of
*int*...


This patch (of 13):

user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...

Link: https://lkml.kernel.org/r/20221014212235.10770-1-s.shtylyov@omp.ru
Link: https://lkml.kernel.org/r/20221014212235.10770-2-s.shtylyov@omp.ruSigned-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

1. Var debug_objects_allocated tracks valid kmem_cache_alloc calls, so
   track it in debug_objects_replace_static_objects.  Do similar things in
   object_cpu_offline.

2. In debug_objects_mem_init, there is no need to call function
   cpuhp_setup_state_nocalls when debug_objects_enabled = 0 (out of
   memory).

Link: https://lkml.kernel.org/r/20220611130634.99741-1-wuchi.zero@gmail.com
Fixes: 634d61f4 ("debugobjects: Percpu pool lookahead freeing/allocation")
Fixes: c4b73aab ("debugobjects: Track number of kmem_cache_alloc/kmem_cache_free done")
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>