- 15 Oct, 2013 10 commits
-
-
Robert Baldyga authored
Value of can_write variable in s3c_hsotg_write_fifo function should be limited to 512 only for non-periodic endpoints. There was some discrepancy between comment and code, becouse comment suggests correct behavior, but in the code limit was applied to periodic endpoints too. So there is additional check causing the limitation concerns only non-periodic endpoints. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Baldyga authored
In dedicated-fifo mode TxFIFOEmpty interrupt should be asserted when TxFIFO for this endpoint is completly empty, so NPTxFEmpLvl and PTxFEmpLvl bits are set in GAHBCFG register. In DIEPMSK register INTknTXFEmpMsk is set, becouse it's needed to indicate FIFO Empty state. Signed-off-by:
-
Robert Baldyga authored
All requests for endpoint are completed when it was halted and the halt was cleared by CLEAR_FEATURE, but not when new state is same as previous. Signed-off-by:
-
Robert Baldyga authored
Property "halted" of s3c_hsotg_ep structure is actually initialised when ep enabled, and changed when halt is set/cleared. Signed-off-by:
-
Robert Baldyga authored
In OEPInt/IEPInt interrupts handling added bitwise and of DAINT and DAINTMSK, because we should handle masked interrupts only. Signed-off-by:
-
Robert Baldyga authored
When s3c_hsotg_trytx is called for ep without enqueued request, interrupts for this ep are disabled, to prevent interrupt flooding. Interrupts are enabled when new request for this ep is starting. Signed-off-by:
-
Robert Baldyga authored
In s3c_hsotg_write_fifo function PTxFEmp/NPTxFEmp interrupts are enabled only in shared-fifo mode. In dedicated-fifo mode they should not be used (when enabled then cause interrupt storm). Signed-off-by:
-
Robert Baldyga authored
After normal handling of SetupDone interrupt, XferCompl interrupt occurs, and then we enqueue new setup request. But when ep0 is stalled, there is no XferCompl, so we have to enqueue setup request immediately after stalling ep. Otherwise incoming control requests won't be processed correctly. Signed-off-by:
-
Andrzej Pietrasiewicz authored
If cdrom flag is set ro flag is implied. Try setting the ro first, and only if it succeeds set the cdrom flag. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
strtobool is more flexible for the user and is more appropriate in the context. Signed-off-by:
-
- 11 Oct, 2013 6 commits
-
-
Gabor Juhos authored
The callers are expecting an ERR_PTR value in case of an error. Change he code to return with an encoded -ENOMEM value in the case of a failed devres_alloc call. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Andreas Larsson authored
Create a way for VERBOSE_DEBUG to be enabled during drivers/usb/gadget/ build. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
Robert Baldyga authored
This patch removes unused label. Signed-off-by:
-
Robert Baldyga authored
This patch adds Multi Count support. It adds few modifications: - Fix s3c_hsotg_set_ep_maxpacket() function. Field wMaxPacketSize of endpoint descriptor is now splitted into maximum packet size value and number of additional transaction per microframe. - Modify s3c_hsotg_write_fifo() function. It actually calculates transfer size, taking into account Multi Count value, which indicates number of transactions per microframe. - Fix s3c_hsotg_start_req() function by setting number of packets to Multi Count field in DIEPTSIZ register for isochronous endpoints. Signed-off-by:
-
Robert Baldyga authored
This patch adds isochronous transfer support. It adds few modifications: - Modify s3c_hsotg_epint() function. Some interrupts are ignored for isochronous endpoints, (e.g. INTknTXFEmpMsk) becouse isochronous request is always transfered in single transaction, which ends with XferCompl interrupt. - Add Odd/Even microframe toggle to allow data transfering in each microframe in s3c_hsotg_epint() function. - Fix s3c_hsotg_ep_enable() function by supporting isochronous endpoint type. Signed-off-by:
-
Felipe Balbi authored
We are going to disable runtime_pm and we're removing the driver, we must disable the device now. Signed-off-by:
-
- 10 Oct, 2013 24 commits
-
-
Valentine Barshak authored
This adds RCAR Gen2 USB phy support. The driver configures USB channels 0/2 which are shared between PCI USB hosts and USBHS/USBSS devices. It also controls internal USBHS phy. Signed-off-by:
Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
So I captured this: |WARNING: CPU: 0 PID: 2078 at /home/bigeasy/work/new/TI/linux/lib/debugobjects.c:260 debug_print_object+0x94/0xc4() |ODEBUG: free active (active state 0) object type: work_struct hint: musb_irq_work+0x0/0x38 [musb_hdrc] |CPU: 0 PID: 2078 Comm: rmmod Not tainted 3.12.0-rc4+ #338 |[<c0014d38>] (unwind_backtrace+0x0/0xf4) from [<c001249c>] (show_stack+0x14/0x1c) |[<c001249c>] (show_stack+0x14/0x1c) from [<c0037720>] (warn_slowpath_common+0x64/0x84) |[<c0037720>] (warn_slowpath_common+0x64/0x84) from [<c00377d4>] (warn_slowpath_fmt+0x30/0x40) |[<c00377d4>] (warn_slowpath_fmt+0x30/0x40) from [<c022ae90>] (debug_print_object+0x94/0xc4) |[<c022ae90>] (debug_print_object+0x94/0xc4) from [<c022b7e0>] (debug_check_no_obj_freed+0x1c0/0x228) |[<c022b7e0>] (debug_check_no_obj_freed+0x1c0/0x228) from [<c00f1f38>] (kfree+0xf8/0x228) |[<c00f1f38>] (kfree+0xf8/0x228) from [<c02921c4>] (release_nodes+0x1a8/0x248) |[<c02921c4>] (release_nodes+0x1a8/0x248) from [<c028f70c>] (__device_release_driver+0x98/0xf0) |[<c028f70c>] (__device_release_driver+0x98/0xf0) from [<c028f840>] (device_release_driver+0x24/0x34) |[<c028f840>] (device_release_driver+0x24/0x34) from [<c028ebe8>] (bus_remove_device+0x148/0x15c) |[<c028ebe8>] (bus_remove_device+0x148/0x15c) from [<c028d120>] (device_del+0x104/0x1c0) |[<c028d120>] (device_del+0x104/0x1c0) from [<c02911e4>] (platform_device_del+0x18/0xac) |[<c02911e4>] (platform_device_del+0x18/0xac) from [<c029179c>] (platform_device_unregister+0xc/0x18) |[<c029179c>] (platform_device_unregister+0xc/0x18) from [<bf1902fc>] (dsps_remove+0x20/0x4c [musb_dsps]) |[<bf1902fc>] (dsps_remove+0x20/0x4c [musb_dsps]) from [<c0290d7c>] (platform_drv_remove+0x1c/0x24) |[<c0290d7c>] (platform_drv_remove+0x1c/0x24) from [<c028f704>] (__device_release_driver+0x90/0xf0) |[<c028f704>] (__device_release_driver+0x90/0xf0) from [<c028f818>] (driver_detach+0xb4/0xb8) |[<c028f818>] (driver_detach+0xb4/0xb8) from [<c028e6e8>] (bus_remove_driver+0x98/0xec) |[<c028e6e8>] (bus_remove_driver+0x98/0xec) from [<c008fc70>] (SyS_delete_module+0x1e0/0x24c) |[<c008fc70>] (SyS_delete_module+0x1e0/0x24c) from [<c000e680>] (ret_fast_syscall+0x0/0x48) |---[ end trace d79045419a3e51ec ]--- The workqueue is only scheduled from the ep0 and never canceled in case the musb is removed before the work has a chance to run. Cc: stable@vger.kernel.org Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Andrzej Pietrasiewicz authored
u_ms.ko is needed only together with usb_f_mass_storage.ko. Merge them. Signed-off-by:
-
Andrzej Pietrasiewicz authored
There are no more old interface users left. Remove it. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Convert the legacy multi gadget to the new interface of f_mass_storage, so that later the compatibility layer in f_mass_storage can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Convert the legacy multi gadget to the new interface of f_rndis, so that later the compatibility layer in f_rndis can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Convert the legacy multi gadget to the new interface of f_ecm, so that later the compatibility layer in f_ecm can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Convert the legacy acm_ms gadget to use the new function interface of f_mass_storage, so that later the compatibility layer in f_mass_storage can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
From this commit on f_mass_storage is available through configfs. Signed-off-by:
-
Andrzej Pietrasiewicz authored
This will be required by configfs integration. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Show/store methods for sysfs attributes contain code which can be used also by configfs. Make them abstract the source the lun and rw_semaphore are taken from. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Convert old mass_storage gadget to use the new interface of f_mass_storage so that later the compatibility layer in f_mass_storage can be removed. struct fsg_common is not known to mass_storage.c, so a setter method is added to f_mass_storage. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Converting mass storage to the new function interface requires converting the USB mass storage's function code and its users. This patch converts the f_mass_storage.c to the new function interface. The file is now compiled into a separate usb_f_mass_storage.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor portions of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor portions of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by:
-
Andrzej Pietrasiewicz authored
When configfs is in place, the luns will not be represented in sysfs, so there will be no struct device associated with a lun. In order to maintain compatibility and allow configfs adoption sysfs is made optional in this patch. As a consequence some debug macros need to be adjusted. Two new fields are added to struct fsg_lun: name and name_pfx. The "name" is for storing a string which is presented to the user instead of the dev_name. The "name_pfx", if non-NULL, is prepended to the "name" at printing time. The name_pfx is for a future lun.0, which will be a default group in mass_storage.<name>. By design at USB function configfs group's creation time its name is not known (but instead set a bit later in drivers/usb/gadget/configfs.c:function_make) and it is this name that serves the purpose of the said name prefix. So instead of copying a yet-unknown string a pointer to it is stored in struct fsg_lun. Signed-off-by:
-
Andrzej Pietrasiewicz authored
When configfs is in place, gadgets will have to be able to free fsg buffers. Add a helper function. Signed-off-by:
-
Robert Baldyga authored
This patch fixes max packet size check in s3c_hsotg_set_ep_maxpacket() function. According USB specification, bits 10..0 of mps specifies maximum packet size, so there is bitwise AND between mps and 0x7ff value. Also added check if maxpacket isn't grater than 1024 which is maximum size od single USB transaction. In s3c_hsotg_ep_enable() function added s3c_hsotg_set_ep_maxpacket() call instead of setting ep.maxpacket value directly. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
-
