- 27 Jul, 2020 40 commits
-
-
Nikolay Borisov authored
Now that btrfs_io_bio have access to btrfs_device we can safely increment the device corruption counter on error. There is one notable exception - repair bios for raid. Since those don't go through the normal submit_stripe_bio callpath but through raid56_parity_recover thus repair bios won't have their device set. Scrub increments the corruption counter for checksum mismatch as well but does not call this function. Link: https://lore.kernel.org/linux-btrfs/4857863.FCrPRfMyHP@liv/Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nikolay Borisov authored
btrfs_map_bio ensures that all submitted bios to devices have valid btrfs_device::bdev so this check can be removed from btrfs_end_bio. This check was added in june 2012 597a60fa ("Btrfs: don't count I/O statistic read errors for missing devices") but then in October of the same year another commit de1ee92a ("Btrfs: recheck bio against block device when we map the bio") started checking for the presence of btrfs_device::bdev before actually issuing the bio. Reviewed-by:
-
Nikolay Borisov authored
Instead of recording stripe_index and using that to access correct btrfs_device from btrfs_bio::stripes record the btrfs_device in btrfs_io_bio. This will enable endio handlers to increment device error counters on checksum errors. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Nikolay Borisov authored
Make the function directly return a pointer to a failure record and adjust callers to handle it. Also refactor the logic inside so that the case which allocates the failure record for the first time is not handled in an 'if' arm, saving us a level of indentation. Finally make the function static as it's not used outside of extent_io.c . Reviewed-by:
-
Nikolay Borisov authored
Only failure that get_state_failrec can get is if there is no failure for the given address. There is no reason why the function should return a status code and use a separate parameter for returning the actual failure rec (if one is found). Simplify it by making the return type a pointer and return ERR_PTR value in case of errors. Signed-off-by:
-
David Sterba authored
The option subvolrootid used to be a workaround for mounting subvolumes and ineffective since 5e2a4b25 ("btrfs: deprecate subvolrootid mount option"). We have subvol= that works and we don't need to keep the cruft, let's remove it. Signed-off-by:
-
David Sterba authored
The mount option alloc_start has no effect since 0d0c71b3 ("btrfs: obsolete and remove mount option alloc_start") which has details why it's been deprecated. We can remove it. Signed-off-by:
-
Filipe Manana authored
When syncing the log, we used to update the log root tree without holding neither the log_mutex of the subvolume root nor the log_mutex of log root tree. We used to have two critical sections delimited by the log_mutex of the log root tree, so in the first one we incremented the log_writers of the log root tree and on the second one we decremented it and waited for the log_writers counter to go down to zero. This was because the update of the log root tree happened between the two critical sections. The use of two critical sections allowed a little bit more of parallelism and required the use of the log_writers counter, necessary to make sure we didn't miss any log root tree update when we have multiple tasks trying to sync the log in parallel. However after commit 06989c79 ("Btrfs: fix race updating log root item during fsync") the log root tree update was moved into a critical section delimited by the subvolume's log_mutex. Later another commit moved the log tree update from that critical section into the second critical section delimited by the log_mutex of the log root tree. Both commits addressed different bugs. The end result is that the first critical section delimited by the log_mutex of the log root tree became pointless, since there's nothing done between it and the second critical section, we just have an unlock of the log_mutex followed by a lock operation. This means we can merge both critical sections, as the first one does almost nothing now, and we can stop using the log_writers counter of the log root tree, which was incremented in the first critical section and decremented in the second criticial section, used to make sure no one in the second critical section started writeback of the log root tree before some other task updated it. So just remove the mutex_unlock() followed by mutex_lock() of the log root tree, as well as the use of the log_writers counter for the log root tree. This patch is part of a series that has the following patches: 1/4 btrfs: only commit the delayed inode when doing a full fsync 2/4 btrfs: only commit delayed items at fsync if we are logging a directory 3/4 btrfs: stop incremening log_batch for the log root tree when syncing log 4/4 btrfs: remove no longer needed use of log_writers for the log root tree After the entire patchset applied I saw about 12% decrease on max latency reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of ram, using kvm and using a raw NVMe device directly (no intermediary fs on the host). The test was invoked like the following: mkfs.btrfs -f /dev/sdk mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk dbench -D /mnt/sdk -t 300 8 umount /mnt/dsk CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
We are incrementing the log_batch atomic counter of the root log tree but we never use that counter, it's used only for the log trees of subvolume roots. We started doing it when we moved the log_batch and log_write counters from the global, per fs, btrfs_fs_info structure, into the btrfs_root structure in commit 7237f183 ("Btrfs: fix tree logs parallel sync"). So just stop doing it for the log root tree and add a comment over the field declaration so inform it's used only for log trees of subvolume roots. This patch is part of a series that has the following patches: 1/4 btrfs: only commit the delayed inode when doing a full fsync 2/4 btrfs: only commit delayed items at fsync if we are logging a directory 3/4 btrfs: stop incremening log_batch for the log root tree when syncing log 4/4 btrfs: remove no longer needed use of log_writers for the log root tree After the entire patchset applied I saw about 12% decrease on max latency reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of ram, using kvm and using a raw NVMe device directly (no intermediary fs on the host). The test was invoked like the following: mkfs.btrfs -f /dev/sdk mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk dbench -D /mnt/sdk -t 300 8 umount /mnt/dsk CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
-
Filipe Manana authored
When logging an inode we are committing its delayed items if either the inode is a directory or if it is a new inode, created in the current transaction. We need to do it for directories, since new directory indexes are stored as delayed items of the inode and when logging a directory we need to be able to access all indexes from the fs/subvolume tree in order to figure out which index ranges need to be logged. However for new inodes that are not directories, we do not need to do it because the only type of delayed item they can have is the inode item, and we are guaranteed to always log an up to date version of the inode item: *) for a full fsync we do it by committing the delayed inode and then copying the item from the fs/subvolume tree with copy_inode_items_to_log(); *) for a fast fsync we always log the inode item based on the contents of the in-memory struct btrfs_inode. We guarantee this is always done since commit e4545de5 ("Btrfs: fix fsync data loss after append write"). So stop running delayed items for a new inodes that are not directories, since that forces committing the delayed inode into the fs/subvolume tree, wasting time and adding contention to the tree when a full fsync is not required. We will only do it in case a fast fsync is needed. This patch is part of a series that has the following patches: 1/4 btrfs: only commit the delayed inode when doing a full fsync 2/4 btrfs: only commit delayed items at fsync if we are logging a directory 3/4 btrfs: stop incremening log_batch for the log root tree when syncing log 4/4 btrfs: remove no longer needed use of log_writers for the log root tree After the entire patchset applied I saw about 12% decrease on max latency reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of ram, using kvm and using a raw NVMe device directly (no intermediary fs on the host). The test was invoked like the following: mkfs.btrfs -f /dev/sdk mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk dbench -D /mnt/sdk -t 300 8 umount /mnt/dsk CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
-
Filipe Manana authored
Commit 2c2c452b ("Btrfs: fix fsync when extend references are added to an inode") forced a commit of the delayed inode when logging an inode in order to ensure we would end up logging the inode item during a full fsync. By committing the delayed inode, we updated the inode item in the fs/subvolume tree and then later when copying items from leafs modified in the current transaction into the log tree (with copy_inode_items_to_log()) we ended up copying the inode item from the fs/subvolume tree into the log tree. Logging an up to date version of the inode item is required to make sure at log replay time we get the link count fixup triggered among other things (replay xattr deletes, etc). The test case generic/040 from fstests exercises the bug which that commit fixed. However for a fast fsync we don't need to commit the delayed inode because we always log an up to date version of the inode item based on the struct btrfs_inode we have in-memory. We started doing this for fast fsyncs since commit e4545de5 ("Btrfs: fix fsync data loss after append write"). So just stop committing the delayed inode if we are doing a fast fsync, we are only wasting time and adding contention on fs/subvolume tree. This patch is part of a series that has the following patches: 1/4 btrfs: only commit the delayed inode when doing a full fsync 2/4 btrfs: only commit delayed items at fsync if we are logging a directory 3/4 btrfs: stop incremening log_batch for the log root tree when syncing log 4/4 btrfs: remove no longer needed use of log_writers for the log root tree After the entire patchset applied I saw about 12% decrease on max latency reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of ram, using kvm and using a raw NVMe device directly (no intermediary fs on the host). The test was invoked like the following: mkfs.btrfs -f /dev/sdk mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk dbench -D /mnt/sdk -t 300 8 umount /mnt/dsk CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
-
Qu Wenruo authored
[BUG] When the anonymous block device pool is exhausted, subvolume/snapshot creation fails with EMFILE (Too many files open). This has been reported by a user. The allocation happens in the second phase during transaction commit where it's only way out is to abort the transaction BTRFS: Transaction aborted (error -24) WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs] RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs] Call Trace: create_pending_snapshots+0x82/0xa0 [btrfs] btrfs_commit_transaction+0x275/0x8c0 [btrfs] btrfs_mksubvol+0x4b9/0x500 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0x11a4/0x2da0 [btrfs] do_vfs_ioctl+0xa9/0x640 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace 33f2f83f3d5250e9 ]--- BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown BTRFS info (device sda1): forced readonly BTRFS warning (device sda1): Skipping commit of aborted transaction. BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown [CAUSE] When the global anonymous block device pool is exhausted, the following call chain will fail, and lead to transaction abort: btrfs_ioctl_snap_create_v2() |- btrfs_ioctl_snap_create_transid() |- btrfs_mksubvol() |- btrfs_commit_transaction() |- create_pending_snapshot() |- btrfs_get_fs_root() |- btrfs_init_fs_root() |- get_anon_bdev() [FIX] Although we can't enlarge the anonymous block device pool, at least we can preallocate anon_dev for subvolume/snapshot in the first phase, outside of transaction context and exactly at the moment the user calls the creation ioctl. Reported-by:Greed Rong <greedrong@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/ CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
[BUG] When a lot of subvolumes are created, there is a user report about transaction aborted caused by slow anonymous block device reclaim: BTRFS: Transaction aborted (error -24) WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs] RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs] Call Trace: create_pending_snapshots+0x82/0xa0 [btrfs] btrfs_commit_transaction+0x275/0x8c0 [btrfs] btrfs_mksubvol+0x4b9/0x500 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0x11a4/0x2da0 [btrfs] do_vfs_ioctl+0xa9/0x640 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace 33f2f83f3d5250e9 ]--- BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown BTRFS info (device sda1): forced readonly BTRFS warning (device sda1): Skipping commit of aborted transaction. BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown [CAUSE] The anonymous device pool is shared and its size is 1M. It's possible to hit that limit if the subvolume deletion is not fast enough and the subvolumes to be cleaned keep the ids allocated. [WORKAROUND] We can't avoid the anon device pool exhaustion but we can shorten the time the id is attached to the subvolume root once the subvolume becomes invisible to the user. Reported-by:
-
Qu Wenruo authored
[BUG] When a lot of subvolumes are created, there is a user report about transaction aborted: BTRFS: Transaction aborted (error -24) WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs] RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs] Call Trace: create_pending_snapshots+0x82/0xa0 [btrfs] btrfs_commit_transaction+0x275/0x8c0 [btrfs] btrfs_mksubvol+0x4b9/0x500 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0x11a4/0x2da0 [btrfs] do_vfs_ioctl+0xa9/0x640 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace 33f2f83f3d5250e9 ]--- BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown BTRFS info (device sda1): forced readonly BTRFS warning (device sda1): Skipping commit of aborted transaction. BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown [CAUSE] The error is EMFILE (Too many files open) and comes from the anonymous block device allocation. The ids are in a shared pool of size 1<<20. The ids are assigned to live subvolumes, ie. the root structure exists in memory (eg. after creation or after the root appears in some path). The pool could be exhausted if the numbers are not reclaimed fast enough, after subvolume deletion or if other system component uses the anon block devices. [WORKAROUND] Since it's not possible to completely solve the problem, we can only minimize the time the id is allocated to a subvolume root. Firstly, we can reduce the use of anon_dev by trees that are not subvolume roots, like data reloc tree. This patch will do extra check on root objectid, to skip roots that don't need anon_dev. Currently it's only data reloc tree and orphan roots. Reported-by:
-
Qu Wenruo authored
This patch will add the following sysfs interface: /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/referenced /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/exclusive /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_referenced /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/max_exclusive /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/limit_flags Which is also available in output of "btrfs qgroup show". /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_data /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_pertrans /sys/fs/btrfs/<UUID>/qgroups/<qgroup_id>/rsv_meta_prealloc The last 3 rsv related members are not visible to users, but can be very useful to debug qgroup limit related bugs. Also, to avoid '/' used in <qgroup_id>, the separator between qgroup level and qgroup id is changed to '_'. The interface is not hidden behind 'debug' as we want this interface to be included into production build and to provide another way to read the qgroup information besides the ioctls. Signed-off-by:
-
Qu Wenruo authored
The qgroup level is limited to u16, so no need to use u64 for it. Signed-off-by:
-
Nikolay Borisov authored
vfs_inode is used only for the inode number everything else requires btrfs_inode. Signed-off-by:
-
Nikolay Borisov authored
Instead of making multiple calls to BTRFS_I simply take btrfs_inode as an input paramter. Signed-off-by:
-
Nikolay Borisov authored
The vfs inode is only used for a pair of inode_lock/unlock calls all other uses call for btrfs_inode. Signed-off-by:
-
Nikolay Borisov authored
All of its children functions use btrfs_inode. Signed-off-by:
-
Nikolay Borisov authored
All of its children take btrfs_inode so bubble up this requirement to btrfs_delalloc_reserve_space's interface and stop calling BTRFS_I internally. Signed-off-by:
-
Nikolay Borisov authored
Instead of calling BTRFS_I on the passed vfs_inode take btrfs_inode directly. Signed-off-by:
-
Nikolay Borisov authored
It needs btrfs_inode so take it as a parameter directly. Signed-off-by:
-
Nikolay Borisov authored
It only uses btrfs_inode internally so take it as a parameter. Signed-off-by:
-
Nikolay Borisov authored
No point in taking an inode only to get btrfs_fs_info from it, instead take btrfs_fs_info directly. Signed-off-by:
-
Nikolay Borisov authored
There's only a single use of vfs_inode in a tracepoint so let's take btrfs_inode directly. Signed-off-by:
-
Nikolay Borisov authored
There is a single use of the generic vfs_inode so let's take btrfs_inode as a parameter and remove couple of redundant BTRFS_I() calls. Signed-off-by:
-
Nikolay Borisov authored
Preparation to make btrfs_dirty_pages take btrfs_inode as parameter. Signed-off-by:
-
Nikolay Borisov authored
Only find_lock_delalloc_range uses vfs_inode so let's take the btrfs_inode as a parameter. Signed-off-by:
-
Nikolay Borisov authored
It has only a single use for a generic vfs inode vs 3 for btrfs_inode. Signed-off-by:
-
Nikolay Borisov authored
This function really needs a btrfs_inode and not a generic vfs one. Take it as a parameter and get rid of superfluous BTRFS_I() calls. Signed-off-by:
-
Nikolay Borisov authored
Take btrfs_inode directly and stop using superfulous BTRFS_I calls. Signed-off-by:
-
Nikolay Borisov authored
Simply forwards its argument so let's get rid of one extra BTRFS_I by taking btrfs_inode directly. Signed-off-by:
-
Nikolay Borisov authored
All children now take btrfs_inode so convert it to taking it as a parameter as well. Signed-off-by:
-
Nikolay Borisov authored
Gets rid of superfulous BTRFS_I() calls and prepare for converting btrfs_run_delalloc_range to using btrfs_inode. Signed-off-by:
-
Nikolay Borisov authored
Simply gets rid of superfluous BTRFS_I() calls. Signed-off-by:
-
Nikolay Borisov authored
Gets rid of superfluous BTRFS_I() calls. Signed-off-by:
-
Nikolay Borisov authored
Preparation to converting btrfs_run_delalloc_range to using btrfs_inode without BTRFS_I() calls. Signed-off-by:
-
Nikolay Borisov authored
It really wants btrfs_inode. Signed-off-by:
-
Nikolay Borisov authored
It doesn't really need vfs_inode but btrfs_inode. Signed-off-by:
-
