- 07 Jun, 2014 8 commits
-
-
Johan Hovold authored
commit 5509076d upstream. During firmware download the device expects memory addresses in big-endian byte order. As the wIndex parameter which hold the address is sent in little-endian byte order regardless of host byte order, we need to use swab16 rather than cpu_to_be16. Also make sure to handle the struct ti_i2c_desc size parameter which is returned in little-endian byte order. Reported-by:
Ludovic Drolez <ldrolez@debian.org> Tested-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 2e01280d upstream. This reverts commit 1ebca9da. This device was erroneously added to the sierra driver even though it's not a Sierra device and was already handled by the option driver. Cc: Richard Farina <sidhayn@gmail.com> Signed-off-by:
-
Daniele Palmas authored
commit d6de486b upstream. option driver, added VID/PID for Telit UE910v2 modem Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Michele Baldessari authored
commit efe26e16 upstream. Custom VID/PIDs for Brainboxes cards as reported in https://bugzilla.redhat.com/show_bug.cgi?id=1071914Signed-off-by:
Michele Baldessari <michele@acksyn.org> Signed-off-by:
-
Tristan Bruns authored
commit 72b30079 upstream. Signed-off-by:
Tristan Bruns <tristan@tristanbruns.de> Signed-off-by:
-
Michael Ulbricht authored
commit 895d240d upstream. By specifying NO_UNION_NORMAL the ACM driver does only use the first two USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA interfaces are left to the USB serial driver. Signed-off-by:
Michael Ulbricht <michael.ulbricht@systec-electronic.com> Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Mizuma, Masayoshi authored
commit 7848a4bf upstream. soft lockup in freeing gigantic hugepage fixed in commit 55f67141 "mm: hugetlb: fix softlockup when a large number of hugepages are freed." can happen in return_unused_surplus_pages(), so let's fix it. Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Helge Deller authored
commit ab3e55b1 upstream. This bug was detected with the libio-epoll-perl debian package where the test case IO-Ppoll-compat.t failed. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
- 18 May, 2014 10 commits
-
-
Greg Kroah-Hartman authored
-
Mikulas Patocka authored
commit 62496658 upstream. Mode setting in the TGA driver is broken for these reasons: - info->fix.line_length is set just once in tgafb_init_fix function. If we change videomode, info->fix.line_length is not recalculated - so the video mode is changed but the screen is corrupted because of wrong info->fix.line_length. - info->fix.smem_len is set in tgafb_init_fix to the size of the default video mode (640x480). If we set a higher resolution, info->fix.smem_len is smaller than the current screen size, preventing the userspace program from mapping the framebuffer. This patch fixes it: - info->fix.line_length initialization is moved to tgafb_set_par so that it is recalculated with each mode change. - info->fix.smem_len is set to a fixed value representing the real amount of video ram (the values are taken from xfree86 driver). - add a check to tgafb_check_var to prevent us from setting a videomode that doesn't fit into videoram. - in tgafb_register, tgafb_init_fix is moved upwards, to be called before fb_find_mode (because fb_find_mode already needs the videoram size set in tgafb_init_fix). Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Andreas Schwab authored
commit 8fe9c93e upstream. GCC 4.8 now generates out-of-line vr save/restore functions when optimizing for size. They are needed for the raid6 altivec support. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 7dec935a upstream. No reason to allocate tp_module structures for modules that have no tracepoints. This just wastes memory. Fixes: b75ef8b4 "Tracepoint: Dissociate from module mutex" Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Thomas Graf authored
commit c58dd2dd upstream. All xtables variants suffer from the defect that the copy_to_user() to copy the counters to user memory may fail after the table has already been exchanged and thus exposed. Return an error at this point will result in freeing the already exposed table. Any subsequent packet processing will result in a kernel panic. We can't copy the counters before exposing the new tables as we want provide the counter state after the old table has been unhooked. Therefore convert this into a silent error. Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Joe Perches authored
commit 3a3bfb61 upstream. __ratelimit() can be considered an inverted bool test because it returns true when not ratelimited. Several tests in the kernel tree use this __ratelimit() function incorrectly. No net_ratelimit uses are incorrect currently though. Most uses of net_ratelimit are to log something via printk or pr_<level>. In order to minimize the uses of net_ratelimit, and to start standardizing the code style used for __ratelimit() and net_ratelimit(), add a net_ratelimited_function() macro and net_<level>_ratelimited() logging macros similar to pr_<level>_ratelimited that use the global net_ratelimit instead of a static per call site "struct ratelimit_state". Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrey Vagin authored
commit 223b02d9 upstream. "len" contains sizeof(nf_ct_ext) and size of extensions. In a worst case it can contain all extensions. Bellow you can find sizes for all types of extensions. Their sum is definitely bigger than 256. nf_ct_ext_types[0]->len = 24 nf_ct_ext_types[1]->len = 32 nf_ct_ext_types[2]->len = 24 nf_ct_ext_types[3]->len = 32 nf_ct_ext_types[4]->len = 152 nf_ct_ext_types[5]->len = 2 nf_ct_ext_types[6]->len = 16 nf_ct_ext_types[7]->len = 8 I have seen "len" up to 280 and my host has crashes w/o this patch. The right way to fix this problem is reducing the size of the ecache extension (4) and Florian is going to do this, but these changes will be quite large to be appropriate for a stable tree. Fixes: 5b423f6a (netfilter: nf_conntrack: fix racy timer handling with reliable) Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
-
Roman Pen authored
commit af5040da upstream. trace_block_rq_complete does not take into account that request can be partially completed, so we can get the following incorrect output of blkparser: C R 232 + 240 [0] C R 240 + 232 [0] C R 248 + 224 [0] C R 256 + 216 [0] but should be: C R 232 + 8 [0] C R 240 + 8 [0] C R 248 + 8 [0] C R 256 + 8 [0] Also, the whole output summary statistics of completed requests and final throughput will be incorrect. This patch takes into account real completion size of the request and fixes wrong completion accounting. Signed-off-by:
Roman Pen <r.peniaev@gmail.com> CC: Steven Rostedt <rostedt@goodmis.org> CC: Frederic Weisbecker <fweisbec@gmail.com> CC: Ingo Molnar <mingo@redhat.com> CC: linux-kernel@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Peter Hurley authored
commit 4291086b upstream. The tty atomic_write_lock does not provide an exclusion guarantee for the tty driver if the termios settings are LECHO & !OPOST. And since it is unexpected and not allowed to call TTY buffer helpers like tty_insert_flip_string concurrently, this may lead to crashes when concurrect writers call pty_write. In that case the following two writers: * the ECHOing from a workqueue and * pty_write from the process race and can overflow the corresponding TTY buffer like follows. If we look into tty_insert_flip_string_fixed_flag, there is: int space = __tty_buffer_request_room(port, goal, flags); struct tty_buffer *tb = port->buf.tail; ... memcpy(char_buf_ptr(tb, tb->used), chars, space); ... tb->used += space; so the race of the two can result in something like this: A B __tty_buffer_request_room __tty_buffer_request_room memcpy(buf(tb->used), ...) tb->used += space; memcpy(buf(tb->used), ...) ->BOOM B's memcpy is past the tty_buffer due to the previous A's tb->used increment. Since the N_TTY line discipline input processing can output concurrently with a tty write, obtain the N_TTY ldisc output_lock to serialize echo output with normal tty writes. This ensures the tty buffer helper tty_insert_flip_string is not called concurrently and everything is fine. Note that this is nicely reproducible by an ordinary user using forkpty and some setup around that (raw termios + ECHO). And it is present in kernels at least after commit d945cb9c (pty: Rework the pty layer to use the normal buffering logic) in 2.6.31-rc3. js: add more info to the commit log js: switch to bool js: lock unconditionally js: lock only the tty->ops->write call References: CVE-2014-0196 Reported-and-tested-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Dan Carpenter authored
commit 3de22601 upstream. pthru32->dataxferlen comes from the user so we need to check that it's not too large so we don't overflow the buffer. Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
- 13 May, 2014 22 commits
-
-
Greg Kroah-Hartman authored
-
Mike Snitzer authored
commit fe76cd88 upstream. If unable to ensure_next_mapping() we must add the current bio, which was removed from the @bios list via bio_list_pop, back to the deferred_bios list before all the remaining @bios. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Giacomo Comes authored
commit 10b6ee4a upstream. The Dell XPS 8700 has a onboard Display port and HDMI port and no VGA port. The call intel_crt_init freeze the machine, so skip such call. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73559 Signed-off-by: Giacomo Comes <comes at naic.edu> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dan Carpenter authored
commit b4c23305 upstream. We always put a NUL terminator one space past the end of the "vendor" buffer. Walter Harms also pointed out that this should just use kstrndup(). Fixes: 7d17c02a ('mtd: Add new SmartMedia/xD FTL') Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit c69dbbf3 upstream. Instead of writing to "nand->reg + REG_FMICSR" we write to "REG_FMICSR" which is NULL and not a valid register. Fixes: 8bff82cb ('mtd: add nand support for w90p910 (v2)') Signed-off-by:
-
Mikulas Patocka authored
commit 6b0df682 upstream. The functions for data copying copyarea_foreward_8bpp and copyarea_backward_8bpp are buggy, they produce screen corruption. This patch fixes the functions and moves the logic to one function "copyarea_8bpp". For simplicity, the function only handles copying that is aligned on 8 pixes. If we copy an unaligned area, generic function cfb_copyarea is used. Signed-off-by:
-
Marek Vasut authored
commit a585f87c upstream. The scenario here is that someone calls enable_irq_wake() from somewhere in the code. This will result in the lockdep producing a backtrace as can be seen below. In my case, this problem is triggered when using the wl1271 (TI WlCore) driver found in drivers/net/wireless/ti/ . The problem cause is rather obvious from the backtrace, but let's outline the dependency. enable_irq_wake() grabs the IRQ buslock in irq_set_irq_wake(), which in turns calls mxs_gpio_set_wake_irq() . But mxs_gpio_set_wake_irq() calls enable_irq_wake() again on the one-level-higher IRQ , thus it tries to grab the IRQ buslock again in irq_set_irq_wake() . Because the spinlock in irq_set_irq_wake()->irq_get_desc_buslock()->__irq_get_desc_lock() is not marked as recursive, lockdep will spew the stuff below. We know we can safely re-enter the lock, so use IRQ_GC_INIT_NESTED_LOCK to fix the spew. ============================================= [ INFO: possible recursive locking detected ] 3.10.33-00012-gf06b763-dirty #61 Not tainted --------------------------------------------- kworker/0:1/18 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/0:1/18: #0: (events){.+.+.+}, at: [<c0036308>] process_one_work+0x134/0x4a4 #1: ((&fw_work->work)){+.+.+.}, at: [<c0036308>] process_one_work+0x134/0x4a4 #2: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 stack backtrace: CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 3.10.33-00012-gf06b763-dirty #61 Workqueue: events request_firmware_work_func [<c0013eb4>] (unwind_backtrace+0x0/0xf0) from [<c0011c74>] (show_stack+0x10/0x14) [<c0011c74>] (show_stack+0x10/0x14) from [<c005bb08>] (__lock_acquire+0x140c/0x1a64) [<c005bb08>] (__lock_acquire+0x140c/0x1a64) from [<c005c6a8>] (lock_acquire+0x9c/0x104) [<c005c6a8>] (lock_acquire+0x9c/0x104) from [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) from [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) from [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) from [<c0068cf4>] (set_irq_wake_real+0x30/0x44) [<c0068cf4>] (set_irq_wake_real+0x30/0x44) from [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) from [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) from [<c02be5e8>] (request_firmware_work_func+0x38/0x58) [<c02be5e8>] (request_firmware_work_func+0x38/0x58) from [<c0036394>] (process_one_work+0x1c0/0x4a4) [<c0036394>] (process_one_work+0x1c0/0x4a4) from [<c0036a4c>] (worker_thread+0x138/0x394) [<c0036a4c>] (worker_thread+0x138/0x394) from [<c003cb74>] (kthread+0xa4/0xb0) [<c003cb74>] (kthread+0xa4/0xb0) from [<c000ee00>] (ret_from_fork+0x14/0x34) wlcore: loaded Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Larry Finger authored
commit 2610decd upstream. In commit f78bccd7 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192se. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Larry Finger authored
commit a53268be upstream. In commit f78bccd7 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192cu. Signed-off-by:
-
Jeff Layton authored
commit 4991a628 upstream. A fl->fl_break_time of 0 has a special meaning to the lease break code that basically means "never break the lease". knfsd uses this to ensure that leases don't disappear out from under it. Unfortunately, the code in __break_lease can end up passing this value to wait_event_interruptible as a timeout, which prevents it from going to sleep at all. This causes __break_lease to spin in a tight loop and causes soft lockups. Fix this by ensuring that we pass a minimum value of 1 as a timeout instead. Cc: J. Bruce Fields <bfields@fieldses.org> Reported-by:
Terry Barnaby <terry1@beam.ltd.uk> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Dan Williams authored
commit 8a4aeec8 upstream. The AHCI spec allows implementations to issue commands in tag order rather than FIFO order: 5.3.2.12 P:SelectCmd HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1) or HBA selects the command to issue that has had the PxCI bit set to '1' longer than any other command pending to be issued. The result is that commands posted sequentially (time-wise) may play out of sequence when issued by hardware. This behavior has likely been hidden by drives that arrange for commands to complete in issue order. However, it appears recent drives (two from different vendors that we have found so far) inflict out-of-order completions as a matter of course. So, we need to take care to maintain ordered submission, otherwise we risk triggering a drive to fall out of sequential-io automation and back to random-io processing, which incurs large latency and degrades throughput. This issue was found in simple benchmarks where QD=2 seq-write performance was 30-50% *greater* than QD=32 seq-write performance. Tagging for -stable and making the change globally since it has a low risk-to-reward ratio. Also, word is that recent versions of an unnamed OS also does it this way now. So, drives in the field are already experienced with this tag ordering scheme. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ed Ciechanowski <ed.ciechanowski@intel.com> Reviewed-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Rafał Miłecki authored
commit 12cd43c6 upstream. Register B43_MMIO_PSM_PHY_HDR is 16 bit one, so accessing it with 32b functions isn't safe. On my machine it causes delayed (!) CPU exception: Disabling lock debugging due to kernel taint mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 4: b200000000070f0f mce: [Hardware Error]: TSC 164083803dc mce: [Hardware Error]: PROCESSOR 2:20fc2 TIME 1396650505 SOCKET 0 APIC 0 microcode 0 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Processor context corrupt Kernel panic - not syncing: Fatal machine check on current CPU Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
-
Mikulas Patocka authored
commit 43751a1b upstream. This patch fixes the hardware cursor on mach64 when font width is not a multiple of 8 pixels. If you load such a font, the cursor is expanded to the next 8-byte boundary and a part of the next character after the cursor is not visible. For example, when you load a font with 12-pixel width, the cursor width is 16 pixels and when the cursor is displayed, 4 pixels of the next character are not visible. The reason is this: atyfb_cursor is called with proper parameters to load an image that is 12-pixel wide. However, the number is aligned on the next 8-pixel boundary on the line "unsigned int width = (cursor->image.width + 7) >> 3;" and the whole function acts as it is was loading a 16-pixel image. This patch fixes it so that the value written to the framebuffer is padded with 0xaaaa (the transparent pattern) when the image size it not a multiple of 8 pixels. The transparent pattern causes that the cursor will not interfere with the next character. Signed-off-by:
-
Mikulas Patocka authored
commit c29dd869 upstream. This patch fixes mach64 to use unaligned access to the font bitmap. This fixes unaligned access warning on sparc64 when 14x8 font is loaded. On x86(64), unaligned access is handled in hardware, so both functions le32_to_cpup and get_unaligned_le32 perform the same operation. On RISC machines, unaligned access is not handled in hardware, so we better use get_unaligned_le32 to avoid the unaligned trap and warning. Signed-off-by:
-
Mikulas Patocka authored
commit a772d473 upstream. When X11 is running and the user switches back to console, the card modifies the content of registers M_MACCESS and M_PITCH in periodic intervals. This patch fixes it by restoring the content of these registers before issuing any accelerator command. Signed-off-by:
-
Mikulas Patocka authored
commit 00a9d699 upstream. The function cfb_copyarea is buggy when the copy operation is not aligned on long boundary (4 bytes on 32-bit machines, 8 bytes on 64-bit machines). How to reproduce: - use x86-64 machine - use a framebuffer driver without acceleration (for example uvesafb) - set the framebuffer to 8-bit depth (for example fbset -a 1024x768-60 -depth 8) - load a font with character width that is not a multiple of 8 pixels note: the console-tools package cannot load a font that has width different from 8 pixels. You need to install the packages "kbd" and "console-terminus" and use the program "setfont" to set font width (for example: setfont Uni2-Terminus20x10) - move some text left and right on the bash command line and you get a screen corruption To expose more bugs, put this line to the end of uvesafb_init_info: info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_READS_FAST; - Now framebuffer console will use cfb_copyarea for console scrolling. You get a screen corruption when console is scrolled. This patch is a rewrite of cfb_copyarea. It fixes the bugs, with this patch, console scrolling in 8-bit depth with a font width that is not a multiple of 8 pixels works fine. The cfb_copyarea code was very buggy and it looks like it was written and never tried with non-8-pixel font. Signed-off-by:
-
Ard Biesheuvel authored
commit 8ceee728 upstream. The GHASH setkey() function uses SSE registers but fails to call kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and then having to deal with the restriction that they cannot be called from interrupt context, move the setkey() implementation to the C domain. Note that setkey() does not use any particular SSE features and is not expected to become a performance bottleneck. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
H. Peter Anvin <hpa@linux.intel.com> Fixes: 0e1227d3 (crypto: ghash - Add PCLMULQDQ accelerated implementation) Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tyler Stachecki authored
commit af61e27c upstream. On suspend, _scsih_suspend calls mpt2sas_base_free_resources, which in turn calls pci_disable_device if the device is enabled prior to suspending. However, _scsih_suspend also calls pci_disable_device itself. Thus, in the event that the device is enabled prior to suspending, pci_disable_device will be called twice. This patch removes the duplicate call to pci_disable_device in _scsi_suspend as it is both unnecessary and results in a kernel oops. Signed-off-by:
Tyler Stachecki <tstache1@binghamton.edu> Signed-off-by:
-
Rusty Russell authored
commit 1f74ef0f upstream. When adding or removing 100G from a balloon: BUG: soft lockup - CPU#0 stuck for 22s! [vballoon:367] We have a wait_event_interruptible(), but the condition is always true (more ballooning to do) so we don't ever sleep. We also have a wait_event() for the host to ack, but that is also always true as QEMU is synchronous for balloon operations. Reported-by:
Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Huacai Chen authored
commit c14af233 upstream. The original MIPS hibernate code flushes cache and TLB entries in swsusp_arch_resume(). But they are removed in Commit 44eeab67 (MIPS: Hibernation: Remove SMP TLB and cacheflushing code.). A cross- CPU flush is surely unnecessary because all but the local CPU have already been disabled. But a local flush (at least the TLB flush) is needed. When we do hibernation on Loongson-3 with an E1000E NIC, it is very easy to produce a kernel panic (kernel page fault, or unaligned access). The root cause is E1000E driver use vzalloc_node() to allocate pages, the stale TLB entries of the booting kernel will be misused by the resumed target kernel. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6643/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Matthew Daley authored
commit 2145e15e upstream. Do not leak kernel-only floppy_raw_cmd structure members to userspace. This includes the linked-list pointer and the pointer to the allocated DMA space. Signed-off-by:
Matthew Daley <mattd@bugfuzz.com> Signed-off-by:
-
Matthew Daley authored
commit ef87dbe7 upstream. Always clear out these floppy_raw_cmd struct members after copying the entire structure from userspace so that the in-kernel version is always valid and never left in an interdeterminate state. Signed-off-by:
-
