- 22 Mar, 2017 29 commits
-
-
Eric Dumazet authored
[ Upstream commit 02b2faaf ] Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting tcp_disconnect() path that was never really considered and/or used before syzkaller ;) I was not able to reproduce the bug, but it seems issues here are the three possible actions that assumed they would never trigger on a listener. 1) tcp_write_timer_handler 2) tcp_delack_timer_handler 3) MTU reduction Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN states from tcp_v6_mtu_reduced() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
[ Upstream commit f78ef7cd ] Fixes: 43a0c675 ("strparser: Stream parser for messages") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
WANG Cong authored
[ Upstream commit 31c05415 ] This restores the ability of setting bond device's mtu to 9000. Fixes: 91572088 ("net: use core MTU range checking in core net infra") Reported-by: daznis@gmail.com Reported-by: Brad Campbell <lists2009@fnarfbargle.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lendacky, Thomas authored
[ Upstream commit 2697ea5a ] If an SFP module is not present, xgbe_phy_sfp_phy_settings() should return after applying the default settings. Currently there is no return statement and the default settings are overwritten. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lendacky, Thomas authored
[ Upstream commit b42c6761 ] The MDIO register mode is set when the device is probed. But when the device is brought down and then back up, the MDIO register mode has been reset. Be sure to reset the mode during device startup and only change the mode of the address specified. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lendacky, Thomas authored
[ Upstream commit 402168b4 ] Some configurations require the use of the hardware's MDIO support to communicate with external PHYs. The MDIO commands indicate completion through the device interrupt. When bringing down the device the interrupts were released before stopping the external PHY, resulting in MDIO command timeouts. Move the stopping of the PHY to before the releasing of the interrupts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit d5afb6f9 ] The code where sk_clone() came from created a new socket and locked it, but then, on the error path didn't unlock it. This problem stayed there for a long while, till b0691c8e ("net: Unlock sock before calling sk_free()") fixed it, but unfortunately the callers of sk_clone() (now sk_clone_locked()) were not audited and the one in dccp_create_openreq_child() remained. Now in the age of the syskaller fuzzer, this was finally uncovered, as reported by Dmitry: ---- 8< ---- I've got the following report while running syzkaller fuzzer on 86292b33 ("Merge branch 'akpm' (patches from Andrew)") [ BUG: held lock freed! ] 4.10.0+ #234 Not tainted ------------------------- syz-executor6/6898 is freeing memory ffff88006286cac0-ffff88006286d3b7, with a lock still held there! (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 5 locks held by syz-executor6/6898: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock include/net/sock.h:1460 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681 #1: (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>] inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126 #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink include/linux/skbuff.h:1767 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue include/linux/skbuff.h:1783 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] process_backlog+0x264/0x730 net/core/dev.c:4835 #3: (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>] ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59 #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 Fix it just like was done by b0691c8e ("net: Unlock sock before calling sk_free()"). Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 48cac18e ] Andrey reported a use-after-free in IPv6 stack. Issue here is that we free the socket while it still has skb in TX path and in some queues. It happens here because IPv6 reassembly unit messes skb->truesize, breaking skb_set_owner_w() badly. We fixed a similar issue for IPV4 in commit 8282f274 ("inet: frag: Always orphan skbs inside ip_defrag()") Acked-by: Joe Stringer <joe@ovn.org> ================================================================== BUG: KASAN: use-after-free in sock_wfree+0x118/0x120 Read of size 8 at addr ffff880062da0060 by task a.out/4140 page:ffffea00018b6800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 0000000000000000 0000000000000000 0000000180130013 raw: dead000000000100 dead000000000200 ffff88006741f140 0000000000000000 page dumped because: kasan: bad access detected CPU: 0 PID: 4140 Comm: a.out Not tainted 4.10.0-rc3+ #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 dump_stack+0x292/0x398 lib/dump_stack.c:51 describe_address mm/kasan/report.c:262 kasan_report_error+0x121/0x560 mm/kasan/report.c:370 kasan_report mm/kasan/report.c:392 __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:413 sock_flag ./arch/x86/include/asm/bitops.h:324 sock_wfree+0x118/0x120 net/core/sock.c:1631 skb_release_head_state+0xfc/0x250 net/core/skbuff.c:655 skb_release_all+0x15/0x60 net/core/skbuff.c:668 __kfree_skb+0x15/0x20 net/core/skbuff.c:684 kfree_skb+0x16e/0x4e0 net/core/skbuff.c:705 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304 inet_frag_put ./include/net/inet_frag.h:133 nf_ct_frag6_gather+0x1125/0x38b0 net/ipv6/netfilter/nf_conntrack_reasm.c:617 ipv6_defrag+0x21b/0x350 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn ./include/linux/netfilter.h:102 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310 nf_hook ./include/linux/netfilter.h:212 __ip6_local_out+0x52c/0xaf0 net/ipv6/output_core.c:160 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742 rawv6_push_pending_frames net/ipv6/raw.c:613 rawv6_sendmsg+0x2cff/0x4130 net/ipv6/raw.c:927 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x620 net/socket.c:848 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x187/0x530 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203 RIP: 0033:0x7ff26e6f5b79 RSP: 002b:00007ff268e0ed98 EFLAGS: 00000206 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007ff268e0f9c0 RCX: 00007ff26e6f5b79 RDX: 0000000000000010 RSI: 0000000020f50fe1 RDI: 0000000000000003 RBP: 00007ff26ebc1220 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ff268e0f9c0 R14: 00007ff26efec040 R15: 0000000000000003 The buggy address belongs to the object at ffff880062da0000 which belongs to the cache RAWv6 of size 1504 The buggy address ffff880062da0060 is located 96 bytes inside of 1504-byte region [ffff880062da0000, ffff880062da05e0) Freed by task 4113: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578 slab_free_hook mm/slub.c:1352 slab_free_freelist_hook mm/slub.c:1374 slab_free mm/slub.c:2951 kmem_cache_free+0xb2/0x2c0 mm/slub.c:2973 sk_prot_free net/core/sock.c:1377 __sk_destruct+0x49c/0x6e0 net/core/sock.c:1452 sk_destruct+0x47/0x80 net/core/sock.c:1460 __sk_free+0x57/0x230 net/core/sock.c:1468 sk_free+0x23/0x30 net/core/sock.c:1479 sock_put ./include/net/sock.h:1638 sk_common_release+0x31e/0x4e0 net/core/sock.c:2782 rawv6_close+0x54/0x80 net/ipv6/raw.c:1214 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:431 sock_release+0x8d/0x1e0 net/socket.c:599 sock_close+0x16/0x20 net/socket.c:1063 __fput+0x332/0x7f0 fs/file_table.c:208 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x19b/0x270 kernel/task_work.c:116 exit_task_work ./include/linux/task_work.h:21 do_exit+0x186b/0x2800 kernel/exit.c:839 do_group_exit+0x149/0x420 kernel/exit.c:943 SYSC_exit_group kernel/exit.c:954 SyS_exit_group+0x1d/0x20 kernel/exit.c:952 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544 slab_post_alloc_hook mm/slab.h:432 slab_alloc_node mm/slub.c:2708 slab_alloc mm/slub.c:2716 kmem_cache_alloc+0x1af/0x250 mm/slub.c:2721 sk_prot_alloc+0x65/0x2a0 net/core/sock.c:1334 sk_alloc+0x105/0x1010 net/core/sock.c:1396 inet6_create+0x44d/0x1150 net/ipv6/af_inet6.c:183 __sock_create+0x4f6/0x880 net/socket.c:1199 sock_create net/socket.c:1239 SYSC_socket net/socket.c:1269 SyS_socket+0xf9/0x230 net/socket.c:1249 entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203 Memory state around the buggy address: ffff880062d9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880062d9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff880062da0000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880062da0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880062da0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 13baa00a ] It is now very clear that silly TCP listeners might play with enabling/disabling timestamping while new children are added to their accept queue. Meaning net_enable_timestamp() can be called from BH context while current state of the static key is not enabled. Lets play safe and allow all contexts. The work queue is scheduled only under the problematic cases, which are the static key enable/disable transition, to not slow down critical paths. This extends and improves what we did in commit 5fa8bbda ("net: use a work queue to defer net_disable_timestamp() work") Fixes: b90e5794 ("net: dont call jump_label_dec from irq context") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Potapenko authored
[ Upstream commit 540e2894 ] KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in packet_bind_spkt(): Acked-by: Eric Dumazet <edumazet@google.com> ================================================================== BUG: KMSAN: use of unitialized memory CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550 0000000000000000 0000000000000092 00000000ec400911 0000000000000002 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424 [< inline >] strlen lib/string.c:484 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230 net/packet/af_packet.c:3132 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? chained origin: 00000000eba00911 [<ffffffff810bb787>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [< inline >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322 [< inline >] kmsan_save_stack mm/kmsan/kmsan.c:334 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:527 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f arch/x86/entry/entry_64.o:? origin description: ----address@SYSC_bind (origin=00000000eb400911) ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) , when I run the following program as root: ===================================== #include <string.h> #include <sys/socket.h> #include <netpacket/packet.h> #include <net/ethernet.h> int main() { struct sockaddr addr; memset(&addr, 0xff, sizeof(addr)); addr.sa_family = AF_PACKET; int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL)); bind(fd, &addr, sizeof(addr)); return 0; } ===================================== This happens because addr.sa_data copied from the userspace is not zero-terminated, and copying it with strlcpy() in packet_bind_spkt() results in calling strlen() on the kernel copy of that non-terminated buffer. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Manning authored
[ Upstream commit 8953de2f ] Even with multicast flooding turned off, IPv6 ND should still work so that IPv6 connectivity is provided. Allow this by continuing to flood multicast traffic originated by us. Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag") Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Mike Manning <mmanning@brocade.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 449809a6 ] SYN processing really was meant to be handled from BH. When I got rid of BH blocking while processing socket backlog in commit 5413d1ba ("net: do not block BH while processing socket backlog"), I forgot that a malicious user could transition to TCP_LISTEN from a state that allowed (SYN) packets to be parked in the socket backlog while socket is owned by the thread doing the listen() call. Sure enough syzkaller found this and reported the bug ;) ================================= [ INFO: inconsistent lock state ] 4.10.0+ #60 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. syz-executor0/5090 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at: [<ffffffff83a6a370>] spin_lock include/linux/spinlock.h:299 [inline] (&(&hashinfo->ehash_locks[i])->rlock){+.?...}, at: [<ffffffff83a6a370>] inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407 {IN-SOFTIRQ-W} state was registered at: mark_irqflags kernel/locking/lockdep.c:2923 [inline] __lock_acquire+0xbcf/0x3270 kernel/locking/lockdep.c:3295 lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline] inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764 tcp_conn_request+0x25cc/0x3310 net/ipv4/tcp_input.c:6399 tcp_v4_conn_request+0x157/0x220 net/ipv4/tcp_ipv4.c:1262 tcp_rcv_state_process+0x802/0x4130 net/ipv4/tcp_input.c:5889 tcp_v4_do_rcv+0x56b/0x940 net/ipv4/tcp_ipv4.c:1433 tcp_v4_rcv+0x2e12/0x3210 net/ipv4/tcp_ipv4.c:1711 ip_local_deliver_finish+0x4ce/0xc40 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:257 [inline] ip_local_deliver+0x1ce/0x710 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:492 [inline] ip_rcv_finish+0xb1d/0x2110 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:257 [inline] ip_rcv+0xd90/0x19c0 net/ipv4/ip_input.c:487 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4179 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4217 netif_receive_skb_internal+0x1d6/0x430 net/core/dev.c:4245 napi_skb_finish net/core/dev.c:4602 [inline] napi_gro_receive+0x4e6/0x680 net/core/dev.c:4636 e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4033 [inline] e1000_clean_rx_irq+0x5e0/0x1490 drivers/net/ethernet/intel/e1000/e1000_main.c:4489 e1000_clean+0xb9a/0x2910 drivers/net/ethernet/intel/e1000/e1000_main.c:3834 napi_poll net/core/dev.c:5171 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5236 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x19e/0x1d0 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:658 [inline] do_IRQ+0x81/0x1a0 arch/x86/kernel/irq.c:250 ret_from_intr+0x0/0x20 native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:53 arch_safe_halt arch/x86/include/asm/paravirt.h:98 [inline] default_idle+0x8f/0x410 arch/x86/kernel/process.c:271 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:262 default_idle_call+0x36/0x60 kernel/sched/idle.c:96 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x348/0x440 kernel/sched/idle.c:243 cpu_startup_entry+0x18/0x20 kernel/sched/idle.c:345 start_secondary+0x344/0x440 arch/x86/kernel/smpboot.c:272 verify_cpu+0x0/0xfc irq event stamp: 1741 hardirqs last enabled at (1741): [<ffffffff84d49d77>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] hardirqs last enabled at (1741): [<ffffffff84d49d77>] _raw_spin_unlock_irqrestore+0xf7/0x1a0 kernel/locking/spinlock.c:191 hardirqs last disabled at (1740): [<ffffffff84d4a732>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (1740): [<ffffffff84d4a732>] _raw_spin_lock_irqsave+0xa2/0x110 kernel/locking/spinlock.c:159 softirqs last enabled at (1738): [<ffffffff84d4deff>] __do_softirq+0x7cf/0xb7d kernel/softirq.c:310 softirqs last disabled at (1571): [<ffffffff84d4b92c>] do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&hashinfo->ehash_locks[i])->rlock); <Interrupt> lock(&(&hashinfo->ehash_locks[i])->rlock); *** DEADLOCK *** 1 lock held by syz-executor0/5090: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83406b43>] lock_sock include/net/sock.h:1460 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83406b43>] sock_setsockopt+0x233/0x1e40 net/core/sock.c:683 stack backtrace: CPU: 1 PID: 5090 Comm: syz-executor0 Not tainted 4.10.0+ #60 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x292/0x398 lib/dump_stack.c:51 print_usage_bug+0x3ef/0x450 kernel/locking/lockdep.c:2387 valid_state kernel/locking/lockdep.c:2400 [inline] mark_lock_irq kernel/locking/lockdep.c:2602 [inline] mark_lock+0xf30/0x1410 kernel/locking/lockdep.c:3065 mark_irqflags kernel/locking/lockdep.c:2941 [inline] __lock_acquire+0x6dc/0x3270 kernel/locking/lockdep.c:3295 lock_acquire+0x241/0x580 kernel/locking/lockdep.c:3753 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] inet_ehash_insert+0x240/0xad0 net/ipv4/inet_hashtables.c:407 reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:753 [inline] inet_csk_reqsk_queue_hash_add+0x1b7/0x2a0 net/ipv4/inet_connection_sock.c:764 dccp_v6_conn_request+0xada/0x11b0 net/dccp/ipv6.c:380 dccp_rcv_state_process+0x51e/0x1660 net/dccp/input.c:606 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632 sk_backlog_rcv include/net/sock.h:896 [inline] __release_sock+0x127/0x3a0 net/core/sock.c:2052 release_sock+0xa5/0x2b0 net/core/sock.c:2539 sock_setsockopt+0x60f/0x1e40 net/core/sock.c:1016 SYSC_setsockopt net/socket.c:1782 [inline] SyS_setsockopt+0x2fb/0x3a0 net/socket.c:1765 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x4458b9 RSP: 002b:00007fe8b26c2b58 EFLAGS: 00000292 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00000000004458b9 RDX: 000000000000001a RSI: 0000000000000001 RDI: 0000000000000006 RBP: 00000000006e2110 R08: 0000000000000010 R09: 0000000000000000 R10: 00000000208c3000 R11: 0000000000000292 R12: 0000000000708000 R13: 0000000020000000 R14: 0000000000001000 R15: 0000000000000000 Fixes: 5413d1ba ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
[ Upstream commit f7df4923 ] When the structure of the LPM tree changes (f.e., due to the addition of a new prefix), we unbind the old tree and then bind the new one. This may result in temporary packet loss. Instead, overwrite the old binding with the new one. Fixes: 6b75c480 ("mlxsw: spectrum_router: Add virtual router management") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakub Kicinski authored
[ Upstream commit a717e3f7 ] There is no guarantees that callers of the TX path will hold the RCU lock. Grab it explicitly. Fixes: fceb9c3e ("geneve: avoid using stale geneve socket.") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakub Kicinski authored
[ Upstream commit 56de859e ] There is no guarantees that callers of the TX path will hold the RCU lock. Grab it explicitly. Fixes: c6fcc4fc ("vxlan: avoid using stale vxlan socket.") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Hüber authored
[ Upstream commit 51fb60eb ] l2tp_ip_backlog_recv may not return -1 if the packet gets dropped. The return value is passed up to ip_local_deliver_finish, which treats negative values as an IP protocol number for resubmission. Signed-off-by: Paul Hüber <phueber@kernsp.in> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roman Mashak authored
[ Upstream commit edb9d1bf ] When tc actions are loaded as a module and no actions have been installed, flushing them would result in actions removed from the memory, but modules reference count not being decremented, so that the modules would not be unloaded. Following is example with GACT action: % sudo modprobe act_gact % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions ls action gact % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 1 % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 2 % sudo rmmod act_gact rmmod: ERROR: Module act_gact is in use .... After the fix: % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions add action pass index 1 % sudo tc actions add action pass index 2 % sudo tc actions add action pass index 3 % lsmod Module Size Used by act_gact 16384 3 % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 0 % % sudo tc actions flush action gact % lsmod Module Size Used by act_gact 16384 0 % sudo rmmod act_gact % lsmod Module Size Used by % Fixes: f97017cd ("net-sched: Fix actions flushing") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit 2e3ce5bc ] Commit b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list") tried to check for duplicate address before copying to asoc's bind_addr list from global addr list. But all the addrs' sin_ports in global addr list are 0 while the addrs' sin_ports are bp->port in asoc's bind_addr list. It means even if it's a duplicate address, af->cmp_addr will still return 0 as the their sin_ports are different. This patch is to fix it by setting the sin_port for addr param with bp->port before comparing the addrs. Fixes: b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list") Reported-by: Wei Chen <weichen@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Anastasov authored
[ Upstream commit 6e28099d ] Restore the lost masking of TOS in input route code to allow ip rules to match it properly. Problem [1] noticed by Shmulik Ladkani <shmulik.ladkani@gmail.com> [1] http://marc.info/?t=137331755300040&r=1&w=2 Fixes: 89aef892 ("ipv4: Delete routing cache.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Anastasov authored
[ Upstream commit 8bcfd092 ] Avoid matching of random stack value for uid when rules are looked up on input route or when RP filter is used. Problem should affect only setups that use ip rules with uid range. Fixes: 622ec2c9 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Russell authored
[ Upstream commit 1158632b ] When using IPv6 transport and a default dst, a pointer to the configured source address is passed into the route lookup. If no source address is configured, then the value is overwritten. IPv6 route lookup ignores egress ifindex match if the source address is set, so if egress ifindex match is desired, the source address must be passed as any. The overwrite breaks this for subsequent lookups. Avoid this by copying the configured address to an existing stack variable and pass a pointer to that instead. Fixes: 272d96a5 ("net: vxlan: lwt: Use source ip address during route lookup.") Signed-off-by: Brian Russell <brussell@brocade.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Forster authored
[ Upstream commit 7dcdf941 ] Align vti6 with vti by returning GRE_KEY flag. This enables iproute2 to display tunnel keys on "ip -6 tunnel show" Signed-off-by: David Forster <dforster@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthias Schiffer authored
[ Upstream commit 4e37d691 ] The incorrect check caused an off-by-one error: the maximum VID 0xffffff was unusable. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcelo Ricardo Leitner authored
[ Upstream commit dfcb9f4f ] commit 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf") attempted to avoid a BUG_ON call when the association being used for a sendmsg() is blocked waiting for more sndbuf and another thread did a peeloff operation on such asoc, moving it to another socket. As Ben Hutchings noticed, then in such case it would return without locking back the socket and would cause two unlocks in a row. Further analysis also revealed that it could allow a double free if the application managed to peeloff the asoc that is created during the sendmsg call, because then sctp_sendmsg() would try to free the asoc that was created only for that call. This patch takes another approach. It will deny the peeloff operation if there is a thread sleeping on the asoc, so this situation doesn't exist anymore. This avoids the issues described above and also honors the syscalls that are already being handled (it can be multiple sendmsg calls). Joint work with Xin Long. Fixes: 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf") Cc: Alexander Popov <alex.popov@linux.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tariq Toukan authored
[ Upstream commit 36154be4 ] In cqe compression with striding RQ, the decompression of the CQE field wqe_counter was done with a wrong wraparound value. This caused handling cqes with a wrong pointer to wqe (rx descriptor) and creating SKBs with wrong data, pointing to wrong (and already consumed) strides/pages. The meaning of the CQE field wqe_counter in striding RQ holds the stride index instead of the WQE index. Hence, when decompressing a CQE, wqe_counter should have wrapped-around the number of strides in a single multi-packet WQE. We dropped this wrap-around mask at all in CQE decompression of striding RQ. It is not needed as in such cases the CQE compression session would break because of different value of wqe_id field, starting a new compression session. Tested: ethtool -K ethxx lro off/on ethtool --set-priv-flags ethxx rx_cqe_compress on super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D verified no csum errors and no page refcount issues. Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Saeed Mahameed authored
[ Upstream commit 6dc4b54e ] When the admin enables/disables cqe compression, updating mpwqe stride size is required: CQE compress ON ==> stride size = 256B CQE compress OFF ==> stride size = 64B This is already done on driver load via mlx5e_set_rq_type_params, all we need is just to call it on arbitrary admin changes of cqe compression state via priv flags or when changing timestamping state (as it is mutually exclusive with cqe compression). This bug introduces no functional damage, it only makes cqe compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Tested: ethtool --set-priv-flags ethxx rx_cqe_compress on pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tariq Toukan authored
[ Upstream commit b0d4660b ] Some of RQ type parameters are derived from CQE compression state flag, CQE compression flag was initialized only after RQ type parameters setup. This leads to load RQ with stride size smaller than what we want for when CQE compression is on. This bug introduces no functional damage, it only makes CQE compression occur less often, since in ConnectX4-LX CQE compression is performed only on packets smaller than stride size. Fix this by marking default status of CQE compression in PFLAG prior to calling mlx5e_set_rq_priv_params(), as it inits some fields based on it. Tested: load driver on systems where rx CQE compress will be on (MH) pktgen with 64 < pkt size < 256 and netperf TCP_STREAM (IPv4/IPv6) verify `ethtool -S ethxx | grep compress` are advancing more often (rapidly) Fixes: 2fc4bfb7 ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tariq Toukan authored
[ Upstream commit 4078e637 ] When rq_type is Striding RQ, no room of SKB_RESERVE is needed as SKB allocation is not done via build_skb. Fixes: e4b85508 ("net/mlx5e: Slightly reduce hardware LRO size") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Saeed Mahameed authored
[ Upstream commit 6f08a22c ] Currently vport representors are added only on driver load and removed on driver unload. Apparently we forgot to handle them when we added the seamless reset flow feature. This caused to leave the representors netdevs alive and active with open HW resources on pci shutdown and on error reset flows. To overcome this we move their handling to interface attach/detach, so they would be cleaned up on shutdown and recreated on reset flows. Fixes: 26e59d80 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 Mar, 2017 11 commits
-
-
Greg Kroah-Hartman authored
-
Kamal Heib authored
commit 45bded2c upstream. Make sure that the Q counters are supported by the FW before trying to allocate/deallocte them, this will avoid driver load failure when they aren't supported by the FW. Fixes: 0837e86a ('IB/mlx5: Add per port counters') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 0d06863f upstream. Fix a BUG when the kernel tries to mount a file system constructed as follows: echo foo > foo.txt mke2fs -Fq -t ext4 -O encrypt foo.img 100 debugfs -w foo.img << EOF write foo.txt a set_inode_field a i_flags 0x80800 set_super_value s_last_orphan 12 quit EOF root@kvm-xfstests:~# mount -o loop foo.img /mnt [ 160.238770] ------------[ cut here ]------------ [ 160.240106] kernel BUG at /usr/projects/linux/ext4/fs/ext4/inode.c:3874! [ 160.240106] invalid opcode: 0000 [#1] SMP [ 160.240106] Modules linked in: [ 160.240106] CPU: 0 PID: 2547 Comm: mount Tainted: G W 4.10.0-rc3-00034-gcdd33b941b67 #227 [ 160.240106] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 160.240106] task: f4518000 task.stack: f47b6000 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 [ 160.240106] EFLAGS: 00010246 CPU: 0 [ 160.240106] EAX: 00000001 EBX: f7be4b50 ECX: f47b7dc0 EDX: 00000007 [ 160.240106] ESI: f43b05a8 EDI: f43babec EBP: f47b7dd0 ESP: f47b7dac [ 160.240106] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 160.240106] CR0: 80050033 CR2: bfd85b08 CR3: 34a00680 CR4: 000006f0 [ 160.240106] Call Trace: [ 160.240106] ext4_truncate+0x1e9/0x3e5 [ 160.240106] ext4_fill_super+0x286f/0x2b1e [ 160.240106] ? set_blocksize+0x2e/0x7e [ 160.240106] mount_bdev+0x114/0x15f [ 160.240106] ext4_mount+0x15/0x17 [ 160.240106] ? ext4_calculate_overhead+0x39d/0x39d [ 160.240106] mount_fs+0x58/0x115 [ 160.240106] vfs_kern_mount+0x4b/0xae [ 160.240106] do_mount+0x671/0x8c3 [ 160.240106] ? _copy_from_user+0x70/0x83 [ 160.240106] ? strndup_user+0x31/0x46 [ 160.240106] SyS_mount+0x57/0x7b [ 160.240106] do_int80_syscall_32+0x4f/0x61 [ 160.240106] entry_INT80_32+0x2f/0x2f [ 160.240106] EIP: 0xb76b919e [ 160.240106] EFLAGS: 00000246 CPU: 0 [ 160.240106] EAX: ffffffda EBX: 08053838 ECX: 08052188 EDX: 080537e8 [ 160.240106] ESI: c0ed0000 EDI: 00000000 EBP: 080537e8 ESP: bfa13660 [ 160.240106] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 160.240106] Code: 59 8b 00 a8 01 0f 84 09 01 00 00 8b 07 66 25 00 f0 66 3d 00 80 75 61 89 f8 e8 3e e2 ff ff 84 c0 74 56 83 bf 48 02 00 00 00 75 02 <0f> 0b 81 7d e8 00 10 00 00 74 02 0f 0b 8b 43 04 8b 53 08 31 c9 [ 160.240106] EIP: ext4_block_zero_page_range+0x1a7/0x2b4 SS:ESP: 0068:f47b7dac [ 160.317241] ---[ end trace d6a773a375c810a5 ]--- The problem is that when the kernel tries to truncate an inode in ext4_truncate(), it tries to clear any on-disk data beyond i_size. Without the encryption key, it can't do that, and so it triggers a BUG. E2fsck does *not* provide this service, and in practice most file systems have their orphan list processed by e2fsck, so to avoid crashing, this patch skips this step if we don't have access to the encryption key (which is the case when processing the orphan list; in all other cases, we will have the encryption key, or the kernel wouldn't have allowed the file to be opened). An open question is whether the fact that e2fsck isn't clearing the bytes beyond i_size causing problems --- and if we've lived with it not doing it for so long, can we drop this from the kernel replay of the orphan list in all cases (not just when we don't have the key for encrypted inodes). Addresses-Google-Bug: #35209576 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit 41380868 upstream. When the protocol is set via the sysfs protocols attribute, the decoder is loaded. However, when it is not when a device is first plugged in or registered. Fixes: acc1c3c6 ("[media] media: rc: load decoder modules on-demand") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit d67a5f4b upstream. Commit df2cb6da ("block: Avoid deadlocks with bio allocation by stacking drivers") created a workqueue for every bio set and code in bio_alloc_bioset() that tries to resolve some low-memory deadlocks by redirecting bios queued on current->bio_list to the workqueue if the system is low on memory. However other deadlocks (see below **) may happen, without any low memory condition, because generic_make_request is queuing bios to current->bio_list (rather than submitting them). ** the related dm-snapshot deadlock is detailed here: https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html Fix this deadlock by redirecting any bios on current->bio_list to the bio_set's rescue workqueue on every schedule() call. Consequently, when the process blocks on a mutex, the bios queued on current->bio_list are dispatched to independent workqueus and they can complete without waiting for the mutex to be available. The structure blk_plug contains an entry cb_list and this list can contain arbitrary callback functions that are called when the process blocks. To implement this fix DM (ab)uses the onstack plug's cb_list interface to get its flush_current_bio_list() called at schedule() time. This fixes the snapshot deadlock - if the map method blocks, flush_current_bio_list() will be called and it redirects bios waiting on current->bio_list to appropriate workqueues. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650 Depends-on: df2cb6da ("block: Avoid deadlocks with bio allocation by stacking drivers") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit 0265634e upstream. When the interrupt requested with devm_request_irq(), serial_ir.rcdev is still null so will cause null deference if the irq handler is called early on. Also ensure that timeout_timer is setup. Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com [mchehab@s-opensource.com: moved serial_ir_probe() back to its original place] Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit d8e9b2b9 upstream. send_display_send_uevent() sends two environment variable, and the first one GVT_DISPLAY_READY is set including a new line at the end of the string; that is obviously superfluous and wrong -- at least, it *looks* so when you only read the code. However, it doesn't appear in the actual output by a (supposedly unexpected) trick. The code uses snprintf() and truncates the string in size 20 bytes. This makes the string as GVT_DISPLAY_READY=0 or ...=1 including the trailing NUL-letter. That is, the '\n' found in the format string is always cut off as a result. Although the code gives the correct result, it is confusing. This patch addresses it, just removing the superfluous '\n' from the format string for avoiding further confusion. If the argument "ready" were not a bool, the size 20 should be corrected as well. But it's a bool, so we can leave the magic number 20 as is for now. FWIW, the bug was spotted by a new GCC7 warning: drivers/gpu/drm/i915/gvt/handlers.c: In function 'pvinfo_mmio_write': drivers/gpu/drm/i915/gvt/handlers.c:1042:34: error: 'snprintf' output truncated before the last format character [-Werror=format-truncation=] snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready); ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gvt/handlers.c:1042:2: note: 'snprintf' output 21 bytes into a destination of size 20 snprintf(display_ready_str, 20, "GVT_DISPLAY_READY=%d\n", ready); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 04d348ae ("drm/i915/gvt: vGPU display virtualization") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1025903Reported-by: Richard Biener <rguenther@suse.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jintack Lim authored
commit 370a0ec1 upstream. Currently, if a vcpu thread tries to change the active state of an interrupt which is already on the same vcpu's AP list, it will loop forever. Since the VGIC mmio handler is called after a vcpu has already synced back the LR state to the struct vgic_irq, we can just let it proceed safely. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Janosch Frank authored
commit 2e4d8800 upstream. While we can technically not run huge page guests right now, we can setup a guest with huge pages. Trying to migrate it will trigger a VM_BUG_ON and, if the kernel is not configured to panic on a BUG, it will happily try to work on non-existing page table entries. With this patch, we always return "dirty" if we encounter a large page when migrating. This at least fixes the immediate problem until we have proper handling for both kind of pages. Fixes: 15f36ebd ("KVM: s390: Add proper dirty bitmap support to S390 kvm.") Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit f98c7bce upstream. If DMA is not available (even when configured in DeviceTree), the driver will fail the startup procedure thus making serial console not available. For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210): [ 1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000 ... [ 11.435732] samsung-uart 13800000.serial: DMA request failed [ 72.963893] samsung-uart 13800000.serial: DMA request failed [ 73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 DMA is not necessary for serial to work, so continue with UART startup after emitting a warning. Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 654b404f upstream. Add missing sanity check to the bulk-in completion handler to avoid an integer underflow that can be triggered by a malicious device. This avoids leaking 128 kB of memory content from after the URB transfer buffer to user space. Fixes: 8c209e67 ("USB: make actual_length in struct urb field u32") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-