I screwed up the sense of this if() statement while porting our
vendor driver to create the dwc2 driver. This caused frame overrun
errors on periodic transfers when there were other transfers
active in the same (micro)frame.

With this fix, the dwc2 driver now works on the Raspberry Pi
platform even with the USB Ethernet controller enabled, where
before that would cause all USB devices to stop working.

Thanks to Ray Jui and Jerry Lin at Broadcom for tracking this down.
Reported-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in printk.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix "with with" in debug message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Collect "be be" in dev_err messages.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__sync_fetch_and_and and __sync_fetch_and_or are functions that are provided
by gcc and depending on the target architecture may be implemented in libgcc,
which is not always available in the kernel. This leads to a build failure
on ARMv5:

drivers/built-in.o: In function `line6_pcm_release':
:(.text+0x3bfe80): undefined reference to `__sync_fetch_and_and_4'
drivers/built-in.o: In function `line6_pcm_acquire':
:(.text+0x3bff30): undefined reference to `__sync_fetch_and_or_4'

To work around this, we can use the kernel-provided cmpxchg macro.

Build-tested only.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename a couple private functions so they have the same namespace
as the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Returning 0 for success is more common.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is just added noise. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all the unused #define's and add namespace to the ones that
are used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the pcmuio_{read,write}() helpers to read/write all 24 channels
instead of handling the digital I/O as three separate ports. This
simplifies both functions with minimal overhead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to handle reading a 24-bit value from the
three 8-bit registers associated with a "port" or "page".

Simplify the for() loop in pcmuio_handle_asic_interrupt() that finds
which channels have triggered the interrupt.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only subdevices 0 and 2 support interrupts. Simplify the attach
a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'asic' and 'port' associated with a given subdevice can easily be
found based on the subdevice 'index'. With that information we can
then calculate the correct iobase and register offset needed to read/
write the 8-bit ports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's simple enough to calculate the iobase when needed. Remove this
member from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The number of subdevices needed by the driver is based on the
'num_asics' reported by the boardinfo and each subdevice always
has 24 channels. Simplify the attach a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These members of the boardinfo are not used by the driver. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'subpriv' pointer is kzalloc'ed during the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialize to
'0' due to the 'thisasic_chanct' always being zero when it is set
during the attach. Simplify the driver a bit by removing it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialize to
s->n_chan if the subdevice supports interrupts and is only used
in functions that can be called by the interrupt subdevice.

Simplyfy the driver a bit  by removing it and just using s->n_chan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialize to
'0' due to the 'byte_no' always being zero when it is set during
the attach. Simplify the driver a bit by removing it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These members of the private data are either not referenced or are set
but never used by the driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to handle writing a 24-bit value to the
three 8-bit registers associated with a "port" or "page".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the I/O ports are left unlocked in the driver so the 'pagelock'
in the private data is not necessary. The paranoia sanity checks
are also unnecessary, Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the register map defines. Gather them together
and tidy them up a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are #ifdef'ed out and not needed in the driver.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by Ian Abbott, comedi_set_spriv() can only be used to
set the subdevice->private pointer to something that can be kfree()'d.
Rename the function to comedi_alloc_spriv() and have it kzalloc() the
memory as well as set the private pointer. This saves a function call
in the drivers and avoids the possibility of incorrectly calling
comedi_set_spriv() for some pointer that is not meant to be kfree()'d.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the addi-data drivers that still use the "common" code have
ttl digital i/o. Remove the unnecessary boardinfo as well as the
subdevice initialization code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the addi-data drivers that still use the "common" code support
dma. Remove the unnecessaary boardinfo and private data flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to the on-going cleanup of the addi-data drivers, the boardinfo
used in the "common" code has a number of variables that are not
used. Remove the cruft.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to the on-going cleanup of the addi-data drivers, there are a
number of unused defines in addi_common.h. Remove the cruft.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All of the remaining addi-data drivers that use the "common" code
either do not have an eeprom or the PCI controller chip is not a
PLX PCI 9054. Knowing this we can simplify the common code that
reads the PCI bars to get the iobase addresses.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to the on-going cleanup of the addi-data drivers, the private
data used in the "common" code has a number of variables that
either are not used at all or or set but never used.

Remove all of them from the private data and the unnecessary use
in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the comments in r819xU_phy.c by:
- replacing "// ..." with "/* .... */"
- removing unnecessary comments, the dates and names of
  developers from comments
- fixing some inconsistent comments
- fixing some typos
- fixing alignment issues
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the whitespace around ',' to meet the
linux kernel coding style.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes variable 'Ret' from rtl8192_QueryBBReg()
since its value is returned immediately after it is
assigned. The name 'Ret', anyway, does not give any
insight and the function description comment is sufficiently
informative regarding the returned value.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix missing free_netdev() before return from function xlr_net_probe()
in the devm_ioremap_resource() error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove more assignments from if-statement conditions in bpctl_mod.c,
resolving checkpatch.pl errors. Those that remain need more attention
than I'm presently prepared to give them.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a bunch of assignments from if-statement conditions in
bpctl_mod.c, resolving checkpatch.pl errors. (This isn't all of
them, but the patch is getting rather long...)
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary braces in bpctl_mod.c, resolving checkpatch.pl
warnings.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>