- 10 Dec, 2016 16 commits
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Fix pointer size when caam is used with AArch64 boot loader on AArch32 kernel. - Fix ahash state corruption in marvell driver. - Fix buggy algif_aed tag handling. - Prevent mcryptd from being used with incompatible algorithms which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_aead - fix uninitialized variable warning crypto: mcryptd - Check mcryptd algorithm compatibility crypto: algif_aead - fix AEAD tag memory handling crypto: caam - fix pointer size for AArch64 boot loader, AArch32 kernel crypto: marvell - Don't corrupt state of an STD req for re-stepped ahash crypto: marvell - Don't copy hash operation twice into the SRAM
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Limit the number of can filters to avoid > MAX_ORDER allocations. Fix from Marc Kleine-Budde. 2) Limit GSO max size in netvsc driver to avoid problems with NVGRE configurations. From Stephen Hemminger. 3) Return proper error when memory allocation fails in ser_gigaset_init(), from Dan Carpenter. 4) Missing linkage undo in error paths of ipvlan_link_new(), from Gao Feng. 5) Missing necessayr SET_NETDEV_DEV in lantiq and cpmac drivers, from Florian Fainelli. 6) Handle probe deferral properly in smsc911x driver. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: mlx5: Fix Kconfig help text net: smsc911x: back out silently on probe deferrals ibmveth: set correct gso_size and gso_type net: ethernet: cpmac: Call SET_NETDEV_DEV() net: ethernet: lantiq_etop: Call SET_NETDEV_DEV() vhost-vsock: fix orphan connection reset cxgb4/cxgb4vf: Assign netdev->dev_port with port ID driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed ser_gigaset: return -ENOMEM on error instead of success NET: usb: cdc_mbim: add quirk for supporting Telit LE922A can: peak: fix bad memory access and free sequence phy: Don't increment MDIO bus refcount unless it's a different owner netvsc: reduce maximum GSO size drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links can: raw: raw_setsockopt: limit number of can_filter that can be set
-
Christopher Covington authored
Since the following commit, Infiniband and Ethernet have not been mutually exclusive. Fixes: 4aa17b28 mlx5: Enable mutual support for IB and Ethernet Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
It seems attackers can also send UDP packets with no payload at all. skb_condense() can still be a win in this case. It will be possible to replace the custom code in tcp_add_backlog() to get full benefit from skb_condense() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Walleij authored
When trying to get a regulator we may get deferred and we see this noise: smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized): couldn't get regulators -517 Then the driver continues anyway. Which means that the regulator may not be properly retrieved and reference counted, and may be switched off in case noone else is using it. Fix this by returning silently on deferred probe and let the system work it out. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2016-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Three fixes: * fix a logic bug introduced by a previous cleanup * fix nl80211 attribute confusing (trying to use a single attribute for two purposes) * fix a long-standing BSS leak that happens when an association attempt is abandoned ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
This patch is based on an earlier one submitted by Jon Maxwell with the following commit message: "We recently encountered a bug where a few customers using ibmveth on the same LPAR hit an issue where a TCP session hung when large receive was enabled. Closer analysis revealed that the session was stuck because the one side was advertising a zero window repeatedly. We narrowed this down to the fact the ibmveth driver did not set gso_size which is translated by TCP into the MSS later up the stack. The MSS is used to calculate the TCP window size and as that was abnormally large, it was calculating a zero window, even although the sockets receive buffer was completely empty." We rely on the Virtual I/O Server partition in a pseries environment to provide the MSS through the TCP header checksum field. The stipulation is that users should not disable checksum offloading if rx packet aggregation is enabled through VIOS. Some firmware offerings provide the MSS in the RX buffer. This is signalled by a bit in the RX queue descriptor. Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jonathan Maxwell <jmaxwell37@gmail.com> Reviewed-by: David Dai <zdai@us.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== udp: receive path optimizations This patch series provides about 100 % performance increase under flood. v2: added Paolo feedback on udp_rmem_release() for tiny sk_rcvbuf added the last patch touching sk_rmem_alloc later ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In flood situations, keeping sk_rmem_alloc at a high value prevents producers from touching the socket. It makes sense to lower sk_rmem_alloc only at the end of udp_rmem_release() after the thread draining receive queue in udp_recvmsg() finished the writes to sk_forward_alloc. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If udp_recvmsg() constantly releases sk_rmem_alloc for every read packet, it gives opportunity for producers to immediately grab spinlocks and desperatly try adding another packet, causing false sharing. We can add a simple heuristic to give the signal by batches of ~25 % of the queue capacity. This patch considerably increases performance under flood by about 50 %, since the thread draining the queue is no longer slowed by false sharing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In UDP RX handler, we currently clear skb->dev before skb is added to receive queue, because device pointer is no longer available once we exit from RCU section. Since this first cache line is always hot, lets reuse this space to store skb->truesize and thus avoid a cache line miss at udp_recvmsg()/udp_skb_destructor time while receive queue spinlock is held. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Idea of busylocks is to let producers grab an extra spinlock to relieve pressure on the receive_queue spinlock shared by consumer. This behavior is requested only once socket receive queue is above half occupancy. Under flood, this means that only one producer can be in line trying to acquire the receive_queue spinlock. These busylock can be allocated on a per cpu manner, instead of a per socket one (that would consume a cache line per socket) This patch considerably improves UDP behavior under stress, depending on number of NIC RX queues and/or RPS spread. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Timur Tabi says: ==================== net: qcom/emac: simplify support for different SOCs On SOCs that have the Qualcomm EMAC network controller, the internal PHY block is always different. Sometimes the differences are small, sometimes it might be a completely different IP. Either way, using version numbers to differentiate them and putting all of the init code in one file does not scale. This patchset does two things: The first breaks up the current code into different files, and the second patch adds support for a third SOC, the Qualcomm Technologies QDF2400 ARM Server SOC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Timur Tabi authored
The QDF2432 and the QDF2400 have slightly different internal PHYs, so there are some programming differences. Some of the registers in the QDF2400 have moved, and some registers require different values during initialization. Because of the differences, and because HIDs are a scare resource, the ACPI tables specify the hardware version in an _HRV property. Version 1 is the QDF2432, and version 2 is the QDF2400. Any future SOC that has the same internal PHY but different programming requirements will be assigned the next available version number. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Timur Tabi authored
The internal PHY of the EMAC differs on each SOC, and the list will only continue to grow. By separating the code into individual files, we can add support for more SOCs more cleanly. Note: The internal PHY is also sometimes called the SGMII device. We also stop referring to the various PHY variations by version number, so no more "v2", "v3", etc. Instead, the devices are named after the SOC they are, which is in sync with the device tree property names. Future patches will probably rearrange more code among the files. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Dec, 2016 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "Several fixes to the DSM (ACPI device specific method) marshaling implementation. I consider these urgent enough to send for 4.9 consideration since they fix the kernel's handling of ARS (Address Range Scrub) commands. Especially for platforms without machine-check-recovery capabilities, successful execution of ARS commands enables the platform to potentially break out of an infinite reboot problem if a media error is present in the boot path. There is also a one line fix for a device-dax read-only mapping regression. Commits 9a901f54 ("acpi, nfit: fix extended status translations for ACPI DSMs") and 325896ff ("device-dax: fix private mapping restriction, permit read-only") are true regression fixes for changes introduced this cycle. Commit efda1b5d ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") fixes the kernel's handling of zero-length results, this never would have worked in the past, but we only just recently discovered a BIOS implementation that emits this arguably spec non-compliant result. The remaining two commits are additional fall out from thinking through the implications of a zero / truncated length result of the ARS Status command. In order to mitigate the risk that these changes introduce yet more regressions they are backstopped by a new unit test in commit a7de92da ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that mocks up inputs to acpi_nfit_ctl()" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix private mapping restriction, permit read-only tools/testing/nvdimm: unit test acpi_nfit_ctl() acpi, nfit: fix bus vs dimm confusion in xlat_status acpi, nfit: validate ars_status output buffer size acpi, nfit, libnvdimm: fix / harden ars_status output length handling acpi, nfit: fix extended status translations for ACPI DSMs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "This is quite late but SCT Write Same support added during this cycle is broken subtly but seriously and it'd be best to disable it before v4.9 gets released. This contains two commits - one low impact sata_mv fix and the mentioned disabling of SCT Write Same" * 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata-scsi: disable SCT Write Same for the moment ata: sata_mv: check for errors when parsing nr-ports from dt
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A fix for an issue with ->d_revalidate() in ceph, causing frequent kernel crashes. Marked for stable - it goes back to 4.6, but started popping up only in 4.8" * tag 'ceph-for-4.9-rc9' of git://github.com/ceph/ceph-client: ceph: don't set req->r_locked_dir in ceph_d_revalidate
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Final batch of SoC fixes A few fixes that have trickled in over the last week, all fixing minor errors in devicetrees -- UART pin assignment on Allwinner H3, correcting number of SATA ports on a Marvell-based Linkstation platform and a display clock fix for Freescale/NXP i.MX7D that fixes a freeze when starting up X" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: orion5x: fix number of sata port for linkstation ls-gl ARM: dts: imx7d: fix LCDIF clock assignment dts: sun8i-h3: correct UART3 pin definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: - build fix for drivers calling ndelay() in a conditional block without curly braces - defconfig updates * tag 'm68k-for-v4.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix ndelay() macro m68k/defconfig: Update defconfigs for v4.9-rc1
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fix from Dave Airlie: "Just a single fix for amdgpu to just suspend the gpu on 'shutdown' instead of shutting it down fully, as for some reason the hw was getting upset in some situations" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: just suspend the hw on pci shutdown
-
Linus Torvalds authored
This reverts commit 53855d10. It shouldn't have come in yet - it depends on the changes in linux-next that will come in during the next merge window. As Matthew Wilcox says, the test suite is broken with the current state without the revert. Requested-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Berg authored
When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Vamsi Krishna authored
NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned and the random MAC address to be used when privacy is enabled. When both the features are enabled, both the BSSID and the local MAC address were getting same value causing Probe Request frames to go with unintended DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID attribute to set the specific BSSID (which was the more recent addition in cfg80211) for a scan. Backwards compatibility with old userspace software is maintained to some extent by allowing NL80211_ATTR_MAC to be used to set the specific BSSID when scanning without enabling random MAC address use. Scanning with random source MAC address was introduced by commit ad2b26ab ("cfg80211: allow drivers to support random MAC addresses for scan") and the issue was introduced with the addition of the second user for the same attribute in commit 818965d3 ("cfg80211: Allow a scan request for a specific BSSID"). Fixes: 818965d3 ("cfg80211: Allow a scan request for a specific BSSID") Signed-off-by: Vamsi Krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Arend inadvertently inverted the logic while converting to wdev_running(), fix that. Fixes: 73c7da3d ("cfg80211: add generic helper to check interface is running") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Arnd Bergmann authored
In some configurations, gcc cannot trace the state of variables across a spin_unlock() barrier, leading to a warning about correct code: xgene_enet_main.c: In function 'xgene_enet_start_xmit': ../../../phy/mdio-xgene.h:112:14: error: 'mss_index' may be used uninitialized in this function [-Werror=maybe-uninitialized] Here we can trivially move the assignment before that spin_unlock, which reliably avoids the warning. Fixes: e3978673 ("drivers: net: xgene: Fix MSS programming") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The array for initializing the cle is set up on the stack with almost entirely constant data and then passed to a function that converts it into HW specific bit patterns. With the latest addition, the size of this array has grown to the point that we get a warning about potential stack overflow in allmodconfig builds: xgene_enet_cle.c: In function ‘xgene_enet_cle_init’: xgene_enet_cle.c:836:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Looking a bit deeper at the usage, I noticed that the only modification of the data is in dead code, as we don't even use the cle module for phy_mode other than PHY_INTERFACE_MODE_XGMII. This means we can simply mark the structure constant and access it directly rather than passing the pointer down through another structure, making the code more efficient at the same time as avoiding the warning. Fixes: a809701f ("drivers: net: xgene: fix: RSS for non-TCP/UDP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
On 32-bit ARM with 64-bit dma_addr_t I get this warning about an incorrect format string: In file included from /git/arm-soc/drivers/net/ethernet/mellanox/mlx5/core/alloc.c:42:0: drivers/net/ethernet/mellanox/mlx5/core/alloc.c: In function ‘mlx5_frag_buf_alloc_node’: drivers/net/ethernet/mellanox/mlx5/core/alloc.c:134:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] We have the special %pad format for printing dma_addr_t, so use that to print the correct address and avoid the warning. Fixes: 1c1b5228 ("net/mlx5e: Implement Fragmented Work Queue (WQ)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: ethernet: Make sure we set dev->dev.parent This patch series builds atop: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner") FMAN is the one that potentially needs patching as well (call SET_NETDEV_DEV), but there appears to be no way that init_phy is called right now, or there is not such an in-tree user. Madalin, can you comment on that? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The TI CPMAC driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The Lantiq Etop driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Tao authored
local_addr.svm_cid is host cid. We should check guest cid instead, which is remote_addr.svm_cid. Otherwise we end up resetting all connections to all guests. Cc: stable@vger.kernel.org [4.8+] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Dec, 2016 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Three important fixes for the parisc architecture. Dave provided two patches: One which purges the TLB before setting a PTE entry and a second one which drops unnecessary TLB flushes. Both patches have been tested for one week on the debian buildd servers and prevent random segmentation faults. The patch from me fixes a crash at boot inside the TLB measuring code on SMP machines with PA8000-PA8700 CPUs (specifically A500-44 and J5000 servers)" * 'parisc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix TLB related boot crash on SMP machines parisc: Remove unnecessary TLB purges from flush_dcache_page_asm and flush_icache_page_asm parisc: Purge TLB before setting PTE
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.9-20161208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-08 this is a pull request for one patch. Jiho Chu found and fixed a use-after-free error in the cleanup path in the peak pcan USB CAN driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kushwaha authored
This patch cleanup checkpatch.pl warning WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) Signed-off-by: Amit Kushwaha <kushwaha.a@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjun V authored
Added missing dev_port assignment in cxgb4vf driver. Also made dev_port assignment of cxgb4 in sync with cxgb4vf driver. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Raghu Vatsavayi says: ==================== liquidio VF offloads and stats Following is final patch series in completing the liquidio VF driver support. These patches have minor changes related to offloads and stats. Please apply patches in following order as some of them depend on earlier patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
Adds support for VF error handling. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Raghu Vatsavayi authored
Adds support for VF timestamp. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-