The phy_mode "2000base-x" is actually supposed to be "1000base-x", even
though the commit title of the original patch says otherwise.

Fixes: 55601a88 ("net: phy: Add 2000base-x, 2500base-x and rxaui modes")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY

Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled

With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.

Fixes: ae1f2a56 ("net: macb: Added support for many RX queues")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BUG: unable to handle kernel paging request at ffffffffa01c5430
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:raw_notifier_chain_register+0x16/0x40
Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08
RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282
RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b
RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068
RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700
R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78
FS:  00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0
Call Trace:
 register_netdevice_notifier+0x43/0x250
 ? 0xffffffffa01e0000
 dsa_slave_register_notifier+0x13/0x70 [dsa_core
 ? 0xffffffffa01e0000
 dsa_init_module+0x2e/0x1000 [dsa_core
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.

Fixes: c9eb3e0f ("net: dsa: Add support for learning FDB through notification")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
PGD 0 P4D 0
Oops: 0000 [#1
CPU: 0 PID: 5697 Comm: modprobe Tainted: G        W         5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:__lock_acquire+0x53/0x10b0
Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a
RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128
RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000
FS:  00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0
Call Trace:
 ? __lock_acquire+0x24e/0x10b0
 lock_acquire+0xdf/0x230
 ? flush_workqueue+0x71/0x530
 flush_workqueue+0x97/0x530
 ? flush_workqueue+0x71/0x530
 l2tp_exit_net+0x170/0x2b0 [l2tp_core
 ? l2tp_exit_net+0x93/0x2b0 [l2tp_core
 ops_exit_list.isra.6+0x36/0x60
 unregister_pernet_operations+0xb8/0x110
 unregister_pernet_device+0x25/0x40
 l2tp_init+0x55/0x1000 [l2tp_core
 ? 0xffffffffa018d000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fead031a839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839
RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003
RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80
Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core
CR2: 0000000000000128
---[ end trace 8322b2b8bf83f8e1

If alloc_workqueue fails in l2tp_init, l2tp_net_ops
is unregistered on failure path. Then l2tp_exit_net
is called which will flush NULL workqueue, this patch
add a NULL check to fix it.

Fixes: 67e04c29 ("l2tp: unregister l2tp_net_ops on failure path")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-05-06

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two x32 JIT fixes: one which has buggy signed comparisons in 64
   bit conditional jumps and another one for 64 bit negation, both
   from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled.

Fixes: 4b2a2bfe ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since ip6frag_expire_frag_queue() now pulls the head skb
from frag queue, we should no longer use skb_get(), since
this leads to an skb leak.

Stefan Bader initially reported a problem in 4.4.stable [1] caused
by the skb_get(), so this patch should also fix this issue.

296583.091021] kernel BUG at /build/linux-6VmqmP/linux-4.4.0/net/core/skbuff.c:1207!
[296583.091734] Call Trace:
[296583.091749]  [<ffffffff81740e50>] __pskb_pull_tail+0x50/0x350
[296583.091764]  [<ffffffff8183939a>] _decode_session6+0x26a/0x400
[296583.091779]  [<ffffffff817ec719>] __xfrm_decode_session+0x39/0x50
[296583.091795]  [<ffffffff818239d0>] icmpv6_route_lookup+0xf0/0x1c0
[296583.091809]  [<ffffffff81824421>] icmp6_send+0x5e1/0x940
[296583.091823]  [<ffffffff81753238>] ? __netif_receive_skb+0x18/0x60
[296583.091838]  [<ffffffff817532b2>] ? netif_receive_skb_internal+0x32/0xa0
[296583.091858]  [<ffffffffc0199f74>] ? ixgbe_clean_rx_irq+0x594/0xac0 [ixgbe]
[296583.091876]  [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6]
[296583.091893]  [<ffffffff8183d431>] icmpv6_send+0x21/0x30
[296583.091906]  [<ffffffff8182b500>] ip6_expire_frag_queue+0xe0/0x120
[296583.091921]  [<ffffffffc04eb27f>] nf_ct_frag6_expire+0x1f/0x30 [nf_defrag_ipv6]
[296583.091938]  [<ffffffff810f3b57>] call_timer_fn+0x37/0x140
[296583.091951]  [<ffffffffc04eb260>] ? nf_ct_net_exit+0x50/0x50 [nf_defrag_ipv6]
[296583.091968]  [<ffffffff810f5464>] run_timer_softirq+0x234/0x330
[296583.091982]  [<ffffffff8108a339>] __do_softirq+0x109/0x2b0

Fixes: d4289fcc ("net: IP6 defrag: use rbtrees for IPv6 defrag")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Cc: Peter Oskolkov <posk@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing the number of buffers in the RX ring while the interface
is running, the following Oops is encountered due to the new number
of buffers being taken into account immediately while their allocation
is done when opening the device only.

[   69.882706] Unable to handle kernel paging request for data at address 0xf0000100
[   69.890172] Faulting instruction address: 0xc033e164
[   69.895122] Oops: Kernel access of bad area, sig: 11 [#1]
[   69.900494] BE PREEMPT CMPCPRO
[   69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269
[   69.915956] task: c0684310 task.stack: c06da000
[   69.920470] NIP:  c033e164 LR: c02e44d0 CTR: c02e41fc
[   69.925504] REGS: dfff1e20 TRAP: 0300   Not tainted  (4.14.115-00006-g179ade8ce3-dirty)
[   69.934161] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 22004428  XER: 20000000
[   69.940869] DAR: f0000100 DSISR: 20000000
[   69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f
[   69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0
[   69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001
[   69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044
[   69.978348] NIP [c033e164] skb_put+0x0/0x5c
[   69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8
[   69.987384] Call Trace:
[   69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable)
[   69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c
[   70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310
[   70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4
[   70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c
[   70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4
[   70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14
[   70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90
[   70.027964]     LR = rcu_idle_exit+0x74/0x90
[   70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable)
[   70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c
[   70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c
[   70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384
[   70.059153] [c06dbff0] [00003438] 0x3438
[   70.063062] Instruction dump:
[   70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910
[   70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910
[   70.081690] ---[ end trace be7ccd9c1e1a9f12 ]---

This patch forbids the modification of the number of buffers in the
ring while the interface is running.

Fixes: ac421852 ("ucc_geth: add ethtool support")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a pr_warn warning. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a cgroup classifier is added, there is a small time interval in
which tp->root is NULL. If we receive a packet in this small time slice
a NULL pointer dereference will happen, leading to a kernel panic:

    # mkdir /sys/fs/cgroup/net_cls/0
    # echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
    # echo $$ >/sys/fs/cgroup/net_cls/0/tasks
    # ping -qfb 255.255.255.255 -I eth0 &>/dev/null &
    # tc qdisc add dev eth0 root handle 10: htb
    # while : ; do
    > tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
    > tc filter delete dev eth0
    > done
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 0000000098a7ff91
    [0000000000000028] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] SMP
    Modules linked in: sch_htb cls_cgroup algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore usb_common spi_orion sfp i2c_mv64xxx phy_generic mdio_i2c marvell10g i2c_core mvpp2 mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4
    Process ping (pid: 5421, stack limit = 0x00000000b20b1505)
    CPU: 3 PID: 5421 Comm: ping Not tainted 5.1.0-rc6 #31
    Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    pstate: 60000005 (nZCv daif -PAN -UAO)
    pc : cls_cgroup_classify+0x80/0xec [cls_cgroup]
    lr : cls_cgroup_classify+0x34/0xec [cls_cgroup]
    sp : ffffff8012e6b850
    x29: ffffff8012e6b850 x28: ffffffc423dd3c00
    x27: ffffff801093ebc0 x26: ffffffc425a85b00
    x25: 0000000020000000 x24: 0000000000000000
    x23: ffffff8012e6b910 x22: ffffffc428db4900
    x21: ffffff8012e6b910 x20: 0000000000100001
    x19: 0000000000000000 x18: 0000000000000000
    x17: 0000000000000000 x16: 0000000000000000
    x15: 0000000000000000 x14: 0000000000000000
    x13: 0000000000000000 x12: 000000000000001c
    x11: 0000000000000018 x10: ffffff8012e6b840
    x9 : 0000000000003580 x8 : 000000000000009d
    x7 : 0000000000000002 x6 : ffffff8012e6b860
    x5 : 000000007cd66ffe x4 : 000000009742a193
    x3 : ffffff800865b4d8 x2 : ffffff8012e6b910
    x1 : 0000000000000400 x0 : ffffffc42c38f300
    Call trace:
     cls_cgroup_classify+0x80/0xec [cls_cgroup]
     tcf_classify+0x78/0x138
     htb_enqueue+0x74/0x320 [sch_htb]
     __dev_queue_xmit+0x3e4/0x9d0
     dev_queue_xmit+0x24/0x30
     ip_finish_output2+0x2e4/0x4d0
     ip_finish_output+0x1d8/0x270
     ip_mc_output+0xa8/0x240
     ip_local_out+0x58/0x68
     ip_send_skb+0x2c/0x88
     ip_push_pending_frames+0x44/0x50
     raw_sendmsg+0x458/0x830
     inet_sendmsg+0x54/0xe8
     sock_sendmsg+0x34/0x50
     __sys_sendto+0xd0/0x120
     __arm64_sys_sendto+0x30/0x40
     el0_svc_common.constprop.0+0x88/0xf8
     el0_svc_handler+0x2c/0x38
     el0_svc+0x8/0xc
    Code: 39496001 360002a1 b9425c14 34000274 (79405260)

Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The switch to make bas_gigaset use usb_fill_int_urb() - instead of
filling that urb "by hand" - missed the subtle ordering of the previous
code.

See, before the switch urb->dev was set to a member somewhere deep in a
complicated structure and then supplied to usb_rcvisocpipe() and
usb_sndisocpipe(). After that switch urb->dev wasn't set to anything
specific before being supplied to those two macros. This triggers a
nasty oops:

    BUG: unable to handle kernel NULL pointer dereference at 00000000
    #PF error: [normal kernel read fault]
    *pde = 00000000
    Oops: 0000 [#1] SMP
    CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1
    Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Call Trace:
     <SOFTIRQ>
     ? gigaset_isdn_connD+0xf6/0x140 [gigaset]
     gigaset_handle_event+0x173e/0x1b90 [gigaset]
     tasklet_action_common.isra.16+0x4e/0xf0
     tasklet_action+0x1e/0x20
     __do_softirq+0xb2/0x293
     ? __irqentry_text_end+0x3/0x3
     call_on_stack+0x45/0x50
     </SOFTIRQ>
     ? irq_exit+0xb5/0xc0
     ? do_IRQ+0x78/0xd0
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? common_interrupt+0xd4/0xdc
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? sched_cpu_activate+0x1b/0xf0
     ? acpi_fan_resume.cold.7+0x9/0x18
     ? cpuidle_enter_state+0x152/0x4c0
     ? cpuidle_enter+0x14/0x20
     ? call_cpuidle+0x21/0x40
     ? do_idle+0x1c8/0x200
     ? cpu_startup_entry+0x25/0x30
     ? rest_init+0x88/0x8a
     ? arch_call_rest_init+0xd/0x19
     ? start_kernel+0x42f/0x448
     ? i386_start_kernel+0xac/0xb0
     ? startup_32_smp+0x164/0x168
    Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video
    CR2: 0000000000000000
    ---[ end trace 1fe07487b9200c73 ]---
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Kernel panic - not syncing: Fatal exception in interrupt
    Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff)
    ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

No-one noticed because this Oops is apparently only triggered by setting
up an ISDN data connection on a live ISDN line on a gigaset base (ie,
the PBX that the gigaset driver support). Very few people do that
running present day kernels.

Anyhow, a little code reorganization makes this problem go away, while
avoiding the subtle ordering that was used in the past. So let's do
that.

Fixes: 78c696c1 ("isdn: gigaset: use usb_fill_int_urb()")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't
need to be supported. Therefore extend the first check to check
for rx_pause being set.

See also phy_set_asym_pause:
rx=0 and tx=1: advertise asym pause only
rx=0 and tx=0: stop advertising both pause modes

The fixed commit isn't wrong, it's just the one that introduced the
linkmode bitmaps.

Fixes: 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e is the counter used to save the location of a dump when an
skb is filled. Once the walk of the table is complete, mr_table_dump
needs to return without resetting that index to 0. Dump of a specific
table is looping because of the reset because there is no way to
indicate the walk of the table is done.

Move the reset to the caller so the dump of each table starts at 0,
but the loop counter is maintained if a dump fills an skb.

Fixes: e1cedae1 ("ipmr: Refactor mr_rtm_dumproute")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a matchall classifier is added, there is a small time interval in
which tp->root is NULL. If we receive a packet in this small time slice
a NULL pointer dereference will happen, leading to a kernel panic:

    # tc qdisc replace dev eth0 ingress
    # tc filter add dev eth0 parent ffff: matchall action gact drop
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000034
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000a623d530
    [0000000000000034] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] SMP
    Modules linked in: cls_matchall sch_ingress nls_iso8859_1 nls_cp437 vfat fat m25p80 spi_nor mtd xhci_plat_hcd xhci_hcd phy_generic sfp mdio_i2c usbcore i2c_mv64xxx marvell10g mvpp2 usb_common spi_orion mvmdio i2c_core sbsa_gwdt phylink ip_tables x_tables autofs4
    Process ksoftirqd/0 (pid: 9, stack limit = 0x0000000009de7d62)
    CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.1.0-rc6 #21
    Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO)
    pc : mall_classify+0x28/0x78 [cls_matchall]
    lr : tcf_classify+0x78/0x138
    sp : ffffff80109db9d0
    x29: ffffff80109db9d0 x28: ffffffc426058800
    x27: 0000000000000000 x26: ffffffc425b0dd00
    x25: 0000000020000000 x24: 0000000000000000
    x23: ffffff80109dbac0 x22: 0000000000000001
    x21: ffffffc428ab5100 x20: ffffffc425b0dd00
    x19: ffffff80109dbac0 x18: 0000000000000000
    x17: 0000000000000000 x16: 0000000000000000
    x15: 0000000000000000 x14: 0000000000000000
    x13: ffffffbf108ad288 x12: dead000000000200
    x11: 00000000f0000000 x10: 0000000000000001
    x9 : ffffffbf1089a220 x8 : 0000000000000001
    x7 : ffffffbebffaa950 x6 : 0000000000000000
    x5 : 000000442d6ba000 x4 : 0000000000000000
    x3 : ffffff8008735ad8 x2 : ffffff80109dbac0
    x1 : ffffffc425b0dd00 x0 : ffffff8010592078
    Call trace:
     mall_classify+0x28/0x78 [cls_matchall]
     tcf_classify+0x78/0x138
     __netif_receive_skb_core+0x29c/0xa20
     __netif_receive_skb_one_core+0x34/0x60
     __netif_receive_skb+0x28/0x78
     netif_receive_skb_internal+0x2c/0xc0
     napi_gro_receive+0x1a0/0x1d8
     mvpp2_poll+0x928/0xb18 [mvpp2]
     net_rx_action+0x108/0x378
     __do_softirq+0x128/0x320
     run_ksoftirqd+0x44/0x60
     smpboot_thread_fn+0x168/0x1b0
     kthread+0x12c/0x130
     ret_from_fork+0x10/0x1c
    Code: aa0203f3 aa1e03e0 d503201f f9400684 (b9403480)
    ---[ end trace fc71e2ef7b8ab5a5 ]---
    Kernel panic - not syncing: Fatal exception in interrupt
    SMP: stopping secondary CPUs
    Kernel Offset: disabled
    CPU features: 0x002,00002000
    Memory Limit: none
    Rebooting in 1 seconds..

Fix this by adding a NULL check in mall_classify().

Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit cd9ff4de changed the key for IFF_POINTOPOINT devices to
INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not
updated to use the altered key. The result is that every packet Tx does
a lookup on the gateway address which does not find an entry, a new one
is created only to find the existing one in the table right before the
insert since arp_constructor was updated to reset the primary key. This
is seen in the allocs and destroys counters:
    ip -s -4 ntable show | head -10 | grep alloc

which increase for each packet showing the unnecessary overhread.

Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE.

Fixes: cd9ff4de ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY")
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ian and Alan both reported seeing overflows after upgrades to 5.x kernels:
  neighbour: arp_cache: neighbor table overflow!

Alan's mpls script helped get to the bottom of this bug. When a new entry
is created the gc_entries counter is bumped in neigh_alloc to check if a
new one is allowed to be created. ___neigh_create then searches for an
existing entry before inserting the just allocated one. If an entry
already exists, the new one is dropped in favor of the existing one. In
this case the cleanup path needs to drop the gc_entries counter. There
is no memory leak, only a counter leak.

Fixes: 58956317 ("neighbor: Improve garbage collection")
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sameeh Jubran says:

====================
Bug fixes for ENA Ethernet driver

Sameeh Jubran (8):
  net: ena: fix swapped parameters when calling
    ena_com_indirect_table_fill_entry
  net: ena: fix: set freed objects to NULL to avoid failing future
    allocations
  net: ena: fix: Free napi resources when ena_up() fails
  net: ena: fix incorrect test of supported hash function
  net: ena: fix return value of ena_com_config_llq_info()
  net: ena: improve latency by disabling adaptive interrupt moderation
    by default
  net: ena: fix ena_com_fill_hash_function() implementation
  net: ena: gcc 8: fix compilation warning
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ena_com_fill_hash_function() didn't configure the rss->hash_func.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adaptive interrupt moderation was erroneously enabled by default
in the driver.

In case the device supports adaptive interrupt moderation it will
be automatically used, which may potentially increase latency.

The adaptive moderation can be enabled from ethtool command in
case the feature is supported by the device.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ena_com_config_llq_info() returns 0 even if ena_com_set_llq() fails.
Return the failure code of ena_com_set_llq() in case it fails.

fixes: 689b2bda ("net: ena: add functions for handling Low Latency Queues in ena_com")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ena_com_set_hash_function() tests if a hash function is supported
by the device before setting it.
The test returns the opposite result than needed.
Reverse the condition to return the correct value.
Also use the BIT macro instead of inline shift.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ena_up() calls ena_init_napi() but does not call ena_del_napi() in
case of failure. This causes a segmentation fault upon rmmod when
netif_napi_del() is called. Fix this bug by calling ena_del_napi()
before returning error from ena_up().

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some cases when a queue related allocation fails, successful past
allocations are freed but the pointer that pointed to them is not
set to NULL. This is a problem for 2 reasons:
1. This is generally a bad practice since this pointer might be
accidentally accessed in the future.
2. Future allocations using the same pointer check if the pointer
is NULL and fail if it is not.

Fixed this by setting such pointers to NULL in the allocation of
queue related objects.

Also refactored the code of ena_setup_tx_resources() to goto-style
error handling to avoid code duplication of resource freeing.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

second parameter should be the index of the table rather than the value.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.

This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.
Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Out of bounds access in xfrm IPSEC policy unlink, from Yue Haibing.

 2) Missing length check for esp4 UDP encap, from Sabrina Dubroca.

 3) Fix byte order of RX STBC access in mac80211, from Johannes Berg.

 4) Inifnite loop in bpftool map create, from Alban Crequy.

 5) Register mark fix in ebpf verifier after pkt/null checks, from Paul
    Chaignon.

 6) Properly use rcu_dereference_sk_user_data in L2TP code, from Eric
    Dumazet.

 7) Buffer overrun in marvell phy driver, from Andrew Lunn.

 8) Several crash and statistics handling fixes to bnxt_en driver, from
    Michael Chan and Vasundhara Volam.

 9) Several fixes to the TLS layer from Jakub Kicinski (copying negative
    amounts of data in reencrypt, reencrypt frag copying, blind nskb->sk
    NULL deref, etc).

10) Several UDP GRO fixes, from Paolo Abeni and Eric Dumazet.

11) PID/UID checks on ipv6 flow labels are inverted, from Willem de
    Bruijn.

12) Use after free in l2tp, from Eric Dumazet.

13) IPV6 route destroy races, also from Eric Dumazet.

14) SCTP state machine can erroneously run recursively, fix from Xin
    Long.

15) Adjust AF_PACKET msg_name length checks, add padding bytes if
    necessary. From Willem de Bruijn.

16) Preserve skb_iif, so that forwarded packets have consistent values
    even if fragmentation is involved. From Shmulik Ladkani.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  udp: fix GRO packet of death
  ipv6: A few fixes on dereferencing rt->from
  rds: ib: force endiannes annotation
  selftests: fib_rule_tests: print the result and return 1 if any tests failed
  ipv4: ip_do_fragment: Preserve skb_iif during fragmentation
  net/tls: avoid NULL pointer deref on nskb->sk in fallback
  selftests: fib_rule_tests: Fix icmp proto with ipv6
  packet: validate msg_namelen in send directly
  packet: in recvmsg msg_name return at least sizeof sockaddr_ll
  sctp: avoid running the sctp state machine recursively
  stmmac: pci: Fix typo in IOT2000 comment
  Documentation: fix netdev-FAQ.rst markup warning
  ipv6: fix races in ip6_dst_destroy()
  l2ip: fix possible use-after-free
  appletalk: Set error code if register_snap_client failed
  net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc
  rxrpc: Fix net namespace cleanup
  ipv6/flowlabel: wait rcu grace period before put_pid()
  vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach
  tcp: add sanity tests in tcp_add_backlog()
  ...

Pull io_uring fixes from Jens Axboe:
 "This is mostly io_uring fixes/tweaks. Most of these were actually done
  in time for the last -rc, but I wanted to ensure that everything
  tested out great before including them. The code delta looks larger
  than it really is, as it's mostly just comment additions/changes.

  Outside of the comment additions/changes, this is mostly removal of
  unnecessary barriers. In all, this pull request contains:

   - Tweak to how we handle errors at submission time. We now post a
     completion event if the error occurs on behalf of an sqe, instead
     of returning it through the system call. If the error happens
     outside of a specific sqe, we return the error through the system
     call. This makes it nicer to use and makes the "normal" use case
     behave the same as the offload cases. (me)

   - Fix for a missing req reference drop from async context (me)

   - If an sqe is submitted with RWF_NOWAIT, don't punt it to async
     context. Return -EAGAIN directly, instead of using it as a hint to
     do async punt. (Stefan)

   - Fix notes on barriers (Stefan)

   - Remove unnecessary barriers (Stefan)

   - Fix potential double free of memory in setup error (Mark)

   - Further improve sq poll CPU validation (Mark)

   - Fix page allocation warning and leak on buffer registration error
     (Mark)

   - Fix iov_iter_type() for new no-ref flag (Ming)

   - Fix a case where dio doesn't honor bio no-page-ref (Ming)"

* tag 'for-linus-20190502' of git://git.kernel.dk/linux-block:
  io_uring: avoid page allocation warnings
  iov_iter: fix iov_iter_type
  block: fix handling for BIO_NO_PAGE_REF
  io_uring: drop req submit reference always in async punt
  io_uring: free allocated io_memory once
  io_uring: fix SQPOLL cpu validation
  io_uring: have submission side sqe errors post a cqe
  io_uring: remove unnecessary barrier after unsetting IORING_SQ_NEED_WAKEUP
  io_uring: remove unnecessary barrier after incrementing dropped counter
  io_uring: remove unnecessary barrier before reading SQ tail
  io_uring: remove unnecessary barrier after updating SQ head
  io_uring: remove unnecessary barrier before reading cq head
  io_uring: remove unnecessary barrier before wq_has_sleeper
  io_uring: fix notes on barriers
  io_uring: fix handling SQEs requesting NOWAIT

Pull PCI fixes from Bjorn Helgaas:
 "I apologize for sending these so late in the cycle. We went back and
  forth about how to deal with the unexpected logging of intentional
  link state changes and finally decided to just config them off by
  default.

  PCI fixes:

   - Stop ignoring "pci=disable_acs_redir" parameter (Logan Gunthorpe)

   - Use shared MSI/MSI-X vector for Link Bandwidth Management (Alex
     Williamson)

   - Add Kconfig option for Link Bandwidth notification messages (Keith
     Busch)"

* tag 'pci-v5.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/LINK: Add Kconfig option (default off)
  PCI/portdrv: Use shared MSI/MSI-X vector for Bandwidth Management
  PCI: Fix issue with "pci=disable_acs_redir" parameter being ignored

Pull MTD fix from Richard Weinberger:
 "A single regression fix for the marvell nand driver"

* tag 'mtd/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: marvell: Clean the controller state before each operation

e8303bb7 ("PCI/LINK: Report degraded links via link bandwidth
notification") added dmesg logging whenever a link changes speed or width
to a state that is considered degraded.  Unfortunately, it cannot
differentiate signal integrity-related link changes from those
intentionally initiated by an endpoint driver, including drivers that may
live in userspace or VMs when making use of vfio-pci.  Some GPU drivers
actively manage the link state to save power, which generates a stream of
messages like this:

  vfio-pci 0000:07:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)

Since we can't distinguish the intentional changes from the signal
integrity issues, leave the reporting turned off by default.  Add a Kconfig
option to turn it on if desired.

Fixes: e8303bb7 ("PCI/LINK: Report degraded links via link bandwidth notification")
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.comSigned-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

syzbot was able to crash host by sending UDP packets with a 0 payload.

TCP does not have this issue since we do not aggregate packets without
payload.

Since dev_gro_receive() sets gso_size based on skb_gro_len(skb)
it seems not worth trying to cope with padded packets.

BUG: KASAN: slab-out-of-bounds in skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826
Read of size 16 at addr ffff88808893fff0 by task syz-executor612/7889

CPU: 0 PID: 7889 Comm: syz-executor612 Not tainted 5.1.0-rc7+ #96
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_load16_noabort+0x14/0x20 mm/kasan/generic_report.c:133
 skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826
 udp_gro_receive_segment net/ipv4/udp_offload.c:382 [inline]
 call_gro_receive include/linux/netdevice.h:2349 [inline]
 udp_gro_receive+0xb61/0xfd0 net/ipv4/udp_offload.c:414
 udp4_gro_receive+0x763/0xeb0 net/ipv4/udp_offload.c:478
 inet_gro_receive+0xe72/0x1110 net/ipv4/af_inet.c:1510
 dev_gro_receive+0x1cd0/0x23c0 net/core/dev.c:5581
 napi_gro_frags+0x36b/0xd10 net/core/dev.c:5843
 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027
 call_write_iter include/linux/fs.h:1866 [inline]
 do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681
 do_iter_write fs/read_write.c:957 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:938
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002
 do_writev+0x15e/0x370 fs/read_write.c:1037
 __do_sys_writev fs/read_write.c:1110 [inline]
 __se_sys_writev fs/read_write.c:1107 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441cc0
Code: 05 48 3d 01 f0 ff ff 0f 83 9d 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 3d 51 93 29 00 00 75 14 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 74 09 fc ff c3 48 83 ec 08 e8 ba 2b 00 00
RSP: 002b:00007ffe8c716118 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007ffe8c716150 RCX: 0000000000441cc0
RDX: 0000000000000001 RSI: 00007ffe8c716170 RDI: 00000000000000f0
RBP: 0000000000000000 R08: 000000000000ffff R09: 0000000000a64668
R10: 0000000020000040 R11: 0000000000000246 R12: 000000000000c2d9
R13: 0000000000402b50 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 5143:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc mm/kasan/common.c:497 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470
 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505
 slab_post_alloc_hook mm/slab.h:437 [inline]
 slab_alloc mm/slab.c:3393 [inline]
 kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555
 mm_alloc+0x1d/0xd0 kernel/fork.c:1030
 bprm_mm_init fs/exec.c:363 [inline]
 __do_execve_file.isra.0+0xaa3/0x23f0 fs/exec.c:1791
 do_execveat_common fs/exec.c:1865 [inline]
 do_execve fs/exec.c:1882 [inline]
 __do_sys_execve fs/exec.c:1958 [inline]
 __se_sys_execve fs/exec.c:1953 [inline]
 __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5351:
 save_stack+0x45/0xd0 mm/kasan/common.c:75
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467
 __cache_free mm/slab.c:3499 [inline]
 kmem_cache_free+0x86/0x260 mm/slab.c:3765
 __mmdrop+0x238/0x320 kernel/fork.c:677
 mmdrop include/linux/sched/mm.h:49 [inline]
 finish_task_switch+0x47b/0x780 kernel/sched/core.c:2746
 context_switch kernel/sched/core.c:2880 [inline]
 __schedule+0x81b/0x1cc0 kernel/sched/core.c:3518
 preempt_schedule_irq+0xb5/0x140 kernel/sched/core.c:3745
 retint_kernel+0x1b/0x2d
 arch_local_irq_restore arch/x86/include/asm/paravirt.h:767 [inline]
 kmem_cache_free+0xab/0x260 mm/slab.c:3766
 anon_vma_chain_free mm/rmap.c:134 [inline]
 unlink_anon_vmas+0x2ba/0x870 mm/rmap.c:401
 free_pgtables+0x1af/0x2f0 mm/memory.c:394
 exit_mmap+0x2d1/0x530 mm/mmap.c:3144
 __mmput kernel/fork.c:1046 [inline]
 mmput+0x15f/0x4c0 kernel/fork.c:1067
 exec_mmap fs/exec.c:1046 [inline]
 flush_old_exec+0x8d9/0x1c20 fs/exec.c:1279
 load_elf_binary+0x9bc/0x53f0 fs/binfmt_elf.c:864
 search_binary_handler fs/exec.c:1656 [inline]
 search_binary_handler+0x17f/0x570 fs/exec.c:1634
 exec_binprm fs/exec.c:1698 [inline]
 __do_execve_file.isra.0+0x1394/0x23f0 fs/exec.c:1818
 do_execveat_common fs/exec.c:1865 [inline]
 do_execve fs/exec.c:1882 [inline]
 __do_sys_execve fs/exec.c:1958 [inline]
 __se_sys_execve fs/exec.c:1953 [inline]
 __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88808893f7c0
 which belongs to the cache mm_struct of size 1496
The buggy address is located 600 bytes to the right of
 1496-byte region [ffff88808893f7c0, ffff88808893fd98)
The buggy address belongs to the page:
page:ffffea0002224f80 count:1 mapcount:0 mapping:ffff88821bc40ac0 index:0xffff88808893f7c0 compound_mapcount: 0
flags: 0x1fffc0000010200(slab|head)
raw: 01fffc0000010200 ffffea00025b4f08 ffffea00027b9d08 ffff88821bc40ac0
raw: ffff88808893f7c0 ffff88808893e440 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88808893fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88808893ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808893ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                                             ^
 ffff888088940000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888088940080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power supply fixes from Sebastian Reichel:
 "Two more fixes for the 5.1 cycle.

  One division by zero fix in a specific driver and one core workaround
  for bad userspace behaviour from systemd regarding uevents. IMHO this
  can be considered to be a userspace bug, but the debug messages are
  useless anyways

   - cpcap-battery: fix a division by zero

   - core: fix systemd issue due to log messages produced by uevent"

* tag 'for-v5.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG
  power: supply: cpcap-battery: Fix division by zero

The current implementation has two errors:

1: The second xor instruction will clear carry flag which
   is necessary for following sbb instruction.
2: The select coding for sbb instruction is wrong, the coding
   is "sbb dreg_hi,ecx", but what we need is "sbb ecx,dreg_hi".

This patch rewrites the implementation and fixes the errors.

This patch fixes below errors reported by bpf/test_verifier in x32
platform when the jit is enabled:

"
0: (b4) w1 = 4
1: (b4) w2 = 4
2: (1f) r2 -= r1
3: (4f) r2 |= r1
4: (87) r2 = -r2
5: (c7) r2 s>>= 63
6: (5f) r1 &= r2
7: (bf) r0 = r1
8: (95) exit
processed 9 insns (limit 131072), stack depth 0
0: (b4) w1 = 4
1: (b4) w2 = 4
2: (1f) r2 -= r1
3: (4f) r2 |= r1
4: (87) r2 = -r2
5: (c7) r2 s>>= 63
6: (5f) r1 &= r2
7: (bf) r0 = r1
8: (95) exit
processed 9 insns (limit 131072), stack depth 0
......
Summary: 1189 PASSED, 125 SKIPPED, 15 FAILED
"
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The current method to compare 64-bit numbers for conditional jump is:

1) Compare the high 32-bit first.

2) If the high 32-bit isn't the same, then goto step 4.

3) Compare the low 32-bit.

4) Check the desired condition.

This method is right for unsigned comparison, but it is buggy for signed
comparison, because it does signed comparison for low 32-bit too.

There is only one sign bit in 64-bit number, that is the MSB in the 64-bit
number, it is wrong to treat low 32-bit as signed number and do the signed
comparison for it.

This patch fixes the bug and adds a testcase in selftests/bpf for such bug.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

It is a followup after the fix in
commit 9c69a132 ("route: Avoid crash from dereferencing NULL rt->from")

rt6_do_redirect():
1. NULL checking is needed on rt->from because a parallel
   fib6_info delete could happen that sets rt->from to NULL.
   (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()).

2. fib6_info_hold() is not enough.  Same reason as (1).
   Meaning, holding dst->__refcnt cannot ensure
   rt->from is not NULL or rt->from->fib6_ref is not 0.

   Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc()
   is already doing, this patch chooses to extend the rcu section
   to keep "from" dereference-able after checking for NULL.

inet6_rtm_getroute():
1. NULL checking is also needed on rt->from for a similar reason.
   Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED.

Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While the endiannes is being handled correctly as indicated by the comment
above the offending line - sparse was unhappy with the missing annotation
as be64_to_cpu() expects a __be64 argument. To mitigate this annotation
all involved variables are changed to a consistent __le64 and the
 conversion to uint64_t delayed to the call to rds_cong_map_updated().
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARC fixes from Vineet Gupta:
 "A few minor fixes for ARC.

   - regression in memset if line size !64

   - avoid panic if PAE and IOC"

* tag 'arc-5.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: memset: fix build with L1_CACHE_SHIFT != 6
  ARC: [hsdk] Make it easier to add PAE40 region to DTB
  ARC: PAE40: don't panic and instead turn off hw ioc