- 27 Jul, 2023 9 commits
-
-
Ran Sun authored
ERROR: that open brace { should be on the previous line Signed-off-by:Ran Sun <sunran001@208suo.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: "foo* bar" should be "foo *bar" ERROR: spaces required around that '=' (ctx:VxW) ERROR: space prohibited before that close parenthesis ')' Signed-off-by:
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: spaces required around that '=' (ctx:VxW) ERROR: spaces required around that '>=' (ctx:WxV) Signed-off-by:
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: open brace '{' following function definitions go on the next line ERROR: space required before the open parenthesis '(' ERROR: space required after that ',' (ctx:VxV) ERROR: spaces required around that '=' (ctx:VxW) Signed-off-by: -
Ran Sun authored
ERROR: space required before the open parenthesis '(' Signed-off-by: -
Ran Sun authored
Fixes the following checkpatch errors: ERROR: do not use assignment in if condition Signed-off-by:
-
Ran Sun authored
ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
ERROR: else should follow close brace '}' ERROR: space required after that ',' (ctx:VxV) Signed-off-by:
-
- 25 Jul, 2023 31 commits
-
-
Lijo Lazar authored
On GFX v9.4.3, compute queue MQD is populated using the values in HQD persistent state register. Hence don't clear the values on module unload, instead restore it to the default reset value so that MQD is initialized correctly during next module load. In particular, preload flag needs to be set on compute queue MQD, otherwise it could cause uninitialized values being used at device reset state resulting in EDC. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Ran Sun authored
ERROR: space required after that ';' (ctx:BxV) Signed-off-by:
-
Ran Sun authored
ERROR: open brace '{' following struct go on the same line Signed-off-by: -
Wenyou Yang authored
To acquire the voltage and current info from gpu_metrics interface, but gpu_metrics_v2_3 doesn't contain them, and to be backward compatible, add new gpu_metrics_v2_4 structure. Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Wenyou Yang <WenYou.Yang@amd.com> Signed-off-by:
-
YuanShang authored
[why] User mode driver need to check the sdma ucode version to see whether the sdma engine supports a new type of PM4 packet. In SRIOV, sdma is loaded by the host. And, there is no way to check the sdma ucode version of CHIP_NAVI12 and CHIP_SIENNA_CICHLID of the host in the guest machine. [how] Load the sdma ucode for CHIP_NAVI12 and CHIP_SIENNA_CICHLID in the guest machine. Signed-off-by:
YuanShang <YuanShang.Mao@amd.com> Reviewed-By:
Horace Chen <horace.chen@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
For a constant format without additional arguments, use seq_puts() instead of seq_printf(). Also, it fixes the following warning. WARNING: Prefer seq_puts to seq_printf And other style fixes: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Block comments should align the * on each line Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
Fixes the following: WARNING: min() should probably be min_t(size_t, size, sizeof(ip)) + ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip))); And other style fixes: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Missing a blank line after declarations Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Expressions under 'else' branch under case 'CHIP_SIENNA_CICHLID' in function 'is_fru_eeprom_supported' are executed whenever the expression in 'if' is False. Otherwise, return from case occurs. Therefore, there is no need in 'else', and it has been removed. Fixes the following: WARNING: else is not generally useful after a break or return + return false; + } else { Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
drm/amd/display: Remove else after return in 'dm_vblank_get_counter' & 'amdgpu_dm_backlight_get_level' Expressions under 'else' branch in function 'dm_vblank_get_counter' & 'amdgpu_dm_backlight_get_level' are executed whenever the expression in 'if' is False. Otherwise, return from function occurs. Therefore, there is no need in 'else', and it has been removed. Fixes the following: WARNING: else is not generally useful after a break or return + return 0; + else { WARNING: else is not generally useful after a break or return + return convert_brightness_to_user(&caps, avg); + } else { Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Return -ENOMEM, when there is no sufficient dynamically allocated memory Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Stanley.Yang authored
Only disable RAS by default for aqua vanjaram on APU platform. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Shiwu Zhang authored
In case that the GET_INST() is used for looping, only loops for the times of actual num of xcc, otherwise GET_INST() will return the invalid index, a.k.a -1 And also remove the redundant mask checking in case of GET_INST() Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by:
Le Ma <le.ma@amd.com> Reviewed-by:
-
Pierre-Eric Pelloux-Prayer authored
This allows tools to distinguish between VRAM and visible VRAM. Use the opportunity to fix locking before accessing bo. v2: squash in unused variable fix Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by:
-
Alex Sierra authored
Set dynamic_svm_range_dump macro to avoid iterating over SVM lists from svm_range_debug_dump when dynamic debug is disabled. Otherwise, it could drop performance, specially with big number of SVM ranges. Make sure both svm_range_set_attr and svm_range_debug_dump functions are dynamically enabled to print svm_range_debug_dump debug traces. Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Tested-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Ran Sun authored
Fix two occurrences of the checkpatch.pl error: ERROR: "foo * bar" should be "foo *bar" Signed-off-by:
-
Ran Sun authored
ERROR: open brace '{' following struct go on the same line Signed-off-by: -
Ran Sun authored
ERROR: open brace '{' following struct go on the same line Signed-off-by: -
Ran Sun authored
Fix the checkpatch error as open brace '{' following struct should go on the same line. Signed-off-by: -
Dan Carpenter authored
This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: bb4fa525 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Aric Cyr authored
This version brings along following fixes: - Fix underflow issue on 175hz timing - Add interface to modify DMUB panel power options - Remove check for default eDP panel_mode - Add new sequence for 4-lane HBR3 on vendor specific retimers - Update DPG test pattern programming - Correct unit conversion for vstartup - Exit idle optimizations before attempt to access PHY - Refactor recout calculation with a more generic formula - Read down-spread percentage from lut to adjust dprefclk. - Don't apply FIFO resync W/A if rdivider = 0 - Prevent invalid pipe connections - Rearrange dmub_cmd defs order - Add VESA SCR case for default aux backlight - Guard DCN31 PHYD32CLK logic against chip family - Correct grammar mistakes Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Leo Ma authored
[Why] Screen underflows happen on 175hz timing for 3 plane overlay case. [How] Based on dst y prefetch value clamp to equ or oto for bandwidth calculation. Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Acked-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
-
Paul Hsieh authored
[Why] This option can vary depending on the panel and may be required to be called during sink detection phase before transmitter control. [How] Allow modify the bit depending on the eDP panel connected with a new interface. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Paul Hsieh <paul.hsieh@amd.com> Tested-by:
-
Anthony Koo authored
- Rearranged defs order Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
-
Taimur Hassan authored
[Why] DPCD read is skipped first time after driver initialization. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Taimur Hassan <syed.hassan@amd.com> Tested-by:
-
Srinivasan Shanmugam authored
Fixes the following to align to linux coding style: WARNING: braces {} are not necessary for any arm of this statement WARNING: Missing a blank line after declarations ERROR: space prohibited before that close parenthesis ')' WARNING: unnecessary whitespace before a quoted newline WARNING: %LX is non-standard C, use %llX Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: -
Ovidiu Bunea authored
[Why] In some vendor specific retimer setups for downstream 4-lane HBR3 configuration, the sink will show severe corruption (horizontal shifting) and intermittent blanking. [How] Add new retimer programming sequence before clock recovery when 4 lanes are active. Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Acked-by:
Ovidiu Bunea <ovidiu.bunea@amd.com> Tested-by:
-
Wenjing Liu authored
[Why] Last ODM slice could be slightly larger than other slice because it can be including the residual. [How] Update DPG pattern programming sequence to use a different width for last odm slice. Reviewed-by:
Chris Park <chris.park@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Reza Amini authored
[Why] vstartup is calculated to be a large number. It works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [How] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by:
Reza Amini <reza.amini@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by:
Leo Chen <sancchen@amd.com> Tested-by:
-
Wenjing Liu authored
[Why] Current recout calculation has a few assumptions and implementation for MPO + ODM combine calculation is very specific. The equation has too many cases without enough comments to document the detail. [How] The change remove the following assumptions: 1. When MPO is enabled, we only allow ODM Combine 2:1 2. ODM Combine always has even segment width. 3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from its top pipe. The change applies a generic formula with more details in comment to document this solution so it is eaiser to learn and debug later. Reviewed-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by:
-
Martin Tsai authored
[Why] Panels show corruption with high refresh rate timings when ss is enabled. [How] Read down-spread percentage from lut to adjust dprefclk. Reviewed-by:
Martin Tsai <martin.tsai@amd.com> Tested-by:
-
