- 10 Jul, 2023 6 commits
-
-
Jeff LaBundy authored
Extend the common binding to include a new variant of the silicon, which effectively replaces a pair of slider nodes with a trackpad node comprising the same or similar properties. As part of this change, the if/then/else schema have been updated to identify properties that are not supported by the new device. Signed-off-by:
Jeff LaBundy <jeff@labundy.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/ZKrpOdp+rM8gDekw@nixie71Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jeff LaBundy authored
The units assumed by the 'azoteq,top-speed', 'azoteq,bottom-speed' and 'azoteq,gesture-dist' properties are unspecified; define them according to the device's datasheet. Signed-off-by:
-
Jeff LaBundy authored
If the device drops into ultra-low-power mode before being placed into normal-power mode as part of ATI being triggered, the device does not assert any interrupts until the ATI routine is restarted two seconds later. Solve this problem by adopting the vendor's recommendation, which calls for the device to be placed into normal-power mode prior to being configured and ATI being triggered. The original implementation followed this sequence, but the order was inadvertently changed as part of the resolution of a separate erratum. Fixes: 1e4189d8 ("Input: iqs7222 - protect volatile registers") Signed-off-by:
-
Martin Kaiser authored
devm_platform_get_and_ioremap_resource maps a resource and returns its physical address. If we don't need the physical address, we should call devm_platform_ioremap_resource instead. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230709134109.182418-1-martin@kaiser.cxSigned-off-by:
-
Hans de Goede authored
A phoronix forum member actual found documentation on what the model number for the touchscreen controller on the Acer Iconia One 7 B1-750 is. Update the driver's description to include this. Link: https://www.phoronix.com/forums/forum/hardware/general-hardware/1382535-10-years-later-linux-getting-a-touchscreen-driver-for-a-once-popular-tablet?p=1384707#post1384707Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230710123633.323937-2-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Fix input_register_device() failure logging "failed to request irq" as error message. Reviewed-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
-
- 08 Jul, 2023 3 commits
-
-
Oleksij Rempel authored
Add a new property 'threshold' to the edt-ft5x06 touchscreen binding. This property allows setting the "click"-threshold in the range from 0 to 255. This change addresses the following dtbs_check warning: imx6dl-lanmcu.dtb: touchscreen@38: 'threshold' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230621093245.78130-6-o.rempel@pengutronix.deSigned-off-by:
-
Christophe JAILLET authored
Use devm_regulator_get_enable() instead of hand writing it. It saves some line of code. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/af343b5b0d740cc9f8863264c30e3da4215721d7.1686985911.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
Use devm_regulator_get_enable() instead of hand writing it. It saves some line of code. Signed-off-by:
-
- 07 Jul, 2023 30 commits
-
-
Krzysztof Kozlowski authored
'dev' is shorter and simpler than '&client->dev' and in few cases it allows to skip line wrapping. Probe function uses '&client->dev' a lot, so this improves readability slightly. Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
'dev' is shorter and simpler than '&client->dev' and in few cases it allows to skip line wrapping. Probe function uses '&client->dev' a lot, so this improves readability slightly. Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230625162817.100397-24-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe() and devm_clk_get_optional(). Less code and the error value gets printed. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Krzysztof Kozlowski authored
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by:
-
Mike Looijmans authored
Add power supply regulator support to the exc3000 devices. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Link: https://lore.kernel.org/r/20230707131042.10795-2-mike.looijmans@topic.nlSigned-off-by:
-
Mike Looijmans authored
Add power supply regulator support to the exc3000 devices. Signed-off-by:
-
Jonathan Frederick authored
Add VID and PID to the xpad_device table to allow driver to use the GameSir T4 Kaleid Controller, which is XTYPE_XBOX360 compatible in xinput mode. Signed-off-by:
Jonathan Frederick <doublej472@gmail.com> Link: https://lore.kernel.org/r/ZKeKSbP3faIPv5jB@dbj-hp-flipSigned-off-by:
-
Sam Lantinga authored
Signed-off-by:
Sam Lantinga <slouken@libsdl.org> Signed-off-by:
Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230607012812.379640-3-vi@endrift.comSigned-off-by:
-
Vicki Pfau authored
Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers. Co-authored-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Replace an open-coded preprocessor conditional with an equivalent helper. Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/ZKYLLmsdCH0Gp7TO@google.comSigned-off-by:
-
- 06 Jul, 2023 1 commit
-
-
Niklas Schnelle authored
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. As ISA already implies HAS_IOPORT we can simply add this dependency and guard sections of code using inb()/outb() as alternative access methods. Co-developed-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230703152355.3897456-2-schnelle@linux.ibm.comSigned-off-by:
-
