u_ms.ko is needed only together with usb_f_mass_storage.ko. Merge them.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

There are no more old interface users left. Remove it.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Convert the legacy multi gadget to the new interface of f_mass_storage,
so that later the compatibility layer in f_mass_storage can be removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Convert the legacy multi gadget to the new interface of f_rndis,
so that later the compatibility layer in f_rndis can be removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Convert the legacy multi gadget to the new interface of f_ecm,
so that later the compatibility layer in f_ecm can be removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Convert the legacy acm_ms gadget to use the new function interface
of f_mass_storage, so that later the compatibility layer in
f_mass_storage can be removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

From this commit on f_mass_storage is available through configfs.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This will be required by configfs integration.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Show/store methods for sysfs attributes contain code which can be used
also by configfs. Make them abstract the source the lun and rw_semaphore
are taken from.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Convert old mass_storage gadget to use the new interface of f_mass_storage
so that later the compatibility layer in f_mass_storage can be removed.

struct fsg_common is not known to mass_storage.c, so a setter method
is added to f_mass_storage.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Converting mass storage to the new function interface requires converting
the USB mass storage's function code and its users.
This patch converts the f_mass_storage.c to the new function interface.
The file is now compiled into a separate usb_f_mass_storage.ko module.
The old function interface is provided by means of a preprocessor conditional
directives. After all users are converted, the old interface can be removed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor a portion of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor a portion of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor portions of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor a portion of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor portions of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor a portion of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

fsg_common_init is a lengthy function. Factor a portion of it out.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

When configfs is in place, the luns will not be represented in sysfs,
so there will be no struct device associated with a lun.
In order to maintain compatibility and allow configfs adoption
sysfs is made optional in this patch.

As a consequence some debug macros need to be adjusted. Two new
fields are added to struct fsg_lun: name and name_pfx.
The "name" is for storing a string which is presented to the user
instead of the dev_name. The "name_pfx", if non-NULL, is prepended
to the "name" at printing time.

The name_pfx is for a future lun.0, which will be a default group in
mass_storage.<name>. By design at USB function configfs group's creation
time its name is not known (but instead set a bit later in
drivers/usb/gadget/configfs.c:function_make) and it is this name that
serves the purpose of the said name prefix. So instead of copying
a yet-unknown string a pointer to it is stored in struct fsg_lun.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

When configfs is in place, gadgets will have to be able to free
fsg buffers. Add a helper function.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch fixes max packet size check in s3c_hsotg_set_ep_maxpacket()
function. According USB specification, bits 10..0 of mps specifies maximum
packet size, so there is bitwise AND between mps and 0x7ff value. Also added
check if maxpacket isn't grater than 1024 which is maximum size od single USB
transaction.

In s3c_hsotg_ep_enable() function added s3c_hsotg_set_ep_maxpacket() call
instead of setting ep.maxpacket value directly.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

If USB_FUNCTIONFS is selected without USB_FUNCTIONFS_ETH and
USB_FUNCTIONFS_RNIS, u_ether.h won't be included and then
USB_ETHERNET_MODULE_PARAMAETERS macro won't be available causing the
following warning compilation:

drivers/usb/gadget/g_ffs.c:81:1: warning: data definition has no type or
storage class [enabled by default]
drivers/usb/gadget/g_ffs.c:81:1: warning: type defaults to ‘int’ in
declaration of ‘USB_ETHERNET_MODULE_PARAMETERS’ [-Wimplicit-int]
drivers/usb/gadget/g_ffs.c:81:1: warning: function declaration isn’t a
prototype [-Wstrict-prototypes]

This patch fixes the warning by making USB_ETHERNET_MODULE_PARAMETERS to
be used iff u_ether.h is included, otherwise it is not needed.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch changes ep maxpacket value from 512 to 1024, because it's needed
to handle interupt and isochronous endpoints in high-speed mode. This change
doesn't affect on driver functioning, because fifo size (3072) is still enough
for the maximum transaction payload (3*1024 for high-speed high-bandwidtch
endpoints).
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Reorder variables in struct otg_fsm as they appear in OTG and EH
supplement to USB2.0.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Several input/output variables missed in current FSM implementation.
This patch adds and makes use of them as specified in OTG and EH
supplement to USB2.0.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

In accordance with OTG and EH supplement, the correct name
of the FSM input is b_ssend_srp.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Mark informative variables with suffix '_inf' to distinguish
them from other non-informative variables with the same name.
If such non-informative varialbes were missed, they are created.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

a_bidl_adis_tmr and a_wait_vfall_tmr OTG timers missed in
current FSM implementation. This patch adds and makes use
of the timers as speicfied in OTG and EH supplement to USB2.0.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Get rid of using OTG driver specific timers by passing timer
type to corresponding callbacks.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch implements missed helper functions for start_gadget() and
start_host() OTG FSM callbacks.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Existence of callback must be checked to avoid NULL pointer
dereferncing.
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

struct otg_fsm may be embedded to device's context structure.
The callbacks may require pointer to struct otg_fsm to obtain
necessary data for its operation (example: regulator reference
for drv_vbus()).
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

When mounting a gadgetfs the following error message is seen:

$ modprobe gadgetfs
gadgetfs: USB Gadget filesystem, version 24 Aug 2004
$ mkdir  /dev/gadget
$ mount -t gadgetfs none /dev/gadget
nop ci_hdrc.0: failed to start (null): -120

The error comes from gadgetfs_probe(), which returns -EISNAM (-120).

As Alan Stern explains[1], this is the normal behavior:

"It is a temporary measure, used only when the file system is set up
initially.  The real bind routine is gadgetfs_bind(), which gets called
when userspace configures the gadget.

In short, this is how it is intended to work.  It isn't a bug."

[1] http://marc.info/?l=linux-usb&m=138029668707075&w=2

So in order to prevent the error message, do not report EISNAM as an error.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

The USB phy-nop nop driver expects the RESET line information
to be sent as a GPIO number via platform data. Adapt to that.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

The platform data bits can be inferred from the other members of
struct usbhs_phy_data. So get rid of the platform_data member.

Build the platform data for the PHY device in usbhs_init_phys() instead.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Modelling the RESET line as a regulator supply wasn't a good idea
as it kind of abuses the regulator framework and also makes adaptation
code more complex.

Instead, manage the RESET gpio line directly in the driver. Update
the device tree binding information.

This also makes us easy to migrate to a dedicated GPIO RESET controller
whenever it becomes available.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

The GPIO number of the RESET line can be passed to the
driver using the gpio_reset member.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>

checkpatch.pl has some valid complaints about style in s3c-hsotg.c:
- macro with 'if' should be really enclosed in 'do {} while (0)'
- seq_puts() is going to be slightly faster than seq_printf()
- pr_err() is shorter than printk(KERN_ERR ...)
Signed-off-by: Pavel Machek <pavel@denx.de>
[bzolnier: minor fixes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>