- 02 Feb, 2016 40 commits
-
-
Boris BREZILLON authored
commit 320092a0 upstream. Unregister the NAND device from the NAND subsystem when removing a denali NAND controller, otherwise the MTD attached to the NAND device is still exposed by the MTD layer, and accesses to this device will likely crash the system. Fixes: 2a0a288e ("mtd: denali: split the generic driver and PCI layer") Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Boris BREZILLON authored
commit de64aa9e upstream. src_ssync_features field is only 1 byte large, and the 4th reserved area is actually 8 bytes large. Fixes: d1e1f4e4 ("mtd: nand: add support for reading ONFI parameters from NAND device") Signed-off-by:
-
Dan Carpenter authored
commit 3a318426 upstream. We check for overflow here, but we don't check for underflow so it causes a static checker warning. Fixes: fb9987d0 ('ath9k_htc: Support for AR9271 chipset.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 2dd52d7f upstream. quadfs_pll_fs660c32_round_rate prints a few structure members that are never initialized, and also doesn't print the only one it cares about. We get a gcc warning about the ones that are printed: clk/st/clkgen-fsyn.c:560:93: warning: 'params.sdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.mdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.pe' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.nsdiv' may be used uninitialized in this function This changes the code to no longer print uninitialized data, and for good measure it also prints the ndiv member that is being set. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 5f7aa907 ("clk: st: Support for QUADFS inside ClockGenB/C/D/E/F") Acked-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Loc Ho authored
commit 1382ea63 upstream. The X-Gene clock driver missed the divider shift operation when set the divider value. Signed-off-by:
Loc Ho <lho@apm.com> Fixes: 308964ca ("clk: Add APM X-Gene SoC clock driver") Signed-off-by:
-
Arnd Bergmann authored
commit d282e2b3 upstream. The initio driver has for many years had two copies of the same module device table. One of them is also used for registering the other driver, the other one is entirely useless after the large scale cleanup that Alan Cox did back in 2007. The compiler warns about this whenever the driver is built-in: drivers/scsi/initio.c:131:29: warning: 'i91u_pci_devices' defined but not used [-Wunused-variable] This removes the extraneous table and the warning. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Russell King authored
commit 2ff56fad upstream. rc-main mistakenly uses #ifdef MODULE to determine whether it should load the rc keymap modules. This symbol is only defined if rc-main is being built as a module itself, and bears no relation to whether the rc keymaps are modules. Fix this to use CONFIG_MODULES instead. Fixes: 631493ec ("[media] rc-core: merge rc-map.c into rc-main.c") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Lukas Wunner authored
commit dcb1394e upstream. Currently when allocating a framebuffer fails, the gem object gets unrefed at the bottom of the call stack in __intel_framebuffer_create, not where it gets refed, which is in intel_framebuffer_create_for_mode (via i915_gem_alloc_object) and in intel_user_framebuffer_create (via drm_gem_object_lookup). This invites mistakes: __intel_framebuffer_create is also called from intelfb_alloc, and as discovered by Tvrtko Ursulin, a double unref was introduced there with a8bb6818 ("drm/i915: Fix error path leak in fbdev fb allocation"). As suggested by Ville Syrjälä, fix the double unref and improve code clarity by moving the unref away from __intel_framebuffer_create to where the gem object gets refed. Based on Tvrtko Ursulin's original v2. v3: On fb alloc failure, unref gem object where it gets refed, fix double unref in separate commit (Ville Syrjälä) v4: Lock struct_mutex on unref (Chris Wilson) v5: Rebase on drm-intel-nightly 2015y-09m-01d-09h-06m-08s UTC, rephrase commit message (Jani Nicula) Tested-by:
Pierre Moreau <pierre.morrow@free.fr> [MBP 5,3 2009 nvidia MCP79 + G96 pre-retina] Tested-by:
Paul Hordiienko <pvt.gord@gmail.com> [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina] Tested-by:
William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina] Tested-by:
Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina] Tested-by:
Bruno Bierbaumer <bruno@bierbaumer.net> [MBP 11,3 2013 intel HSW + nvidia GK107 retina] Fixes: a8bb6818 ("drm/i915: Fix error path leak in fbdev fb allocation") Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/2161c5062ef5d6458f8ae14d924a26d4d1dba317.1446892879.git.lukas@wunner.deSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Alexey Khoroshilov authored
commit 6ccb81f2 upstream. Since a8bb6818 __intel_framebuffer_create() is called with struct_mutex held, so it should use drm_gem_object_unreference() instead of drm_gem_object_unreference_unlocked(). Found by Linux Driver Verification project (linuxtesting.org). This regression has been introduced in commit a8bb6818 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Feb 10 18:00:39 2014 +0100 drm/i915: Fix error path leak in fbdev fb allocation Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Josh Boyer authored
commit 6b31de3e upstream. Like the Yoga 900 models the Lenovo Yoga 700 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272 Tested-by: <dinyar.rabady+spam@gmail.com> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Rich Felker authored
commit 114bf37e upstream. Add Yoshinori Sato and Rich Felker as maintainers for arch/sh (SUPERH). Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by:
D. Jeff Dionne <jeff@uClinux.org> Acked-by:
Rob Landley <rob@landley.net> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tariq Saeed authored
commit b1b1e15e upstream. NFS on a 2 node ocfs2 cluster each node exporting dir. The lock causing the hang is the global bit map inode lock. Node 1 is master, has the lock granted in PR mode; Node 2 is in the converting list (PR -> EX). There are no holders of the lock on the master node so it should downconvert to NL and grant EX to node 2 but that does not happen. BLOCKED + QUEUED in lock res are set and it is on osb blocked list. Threads are waiting in __ocfs2_cluster_lock on BLOCKED. One thread wants EX, rest want PR. So it is as though the downconvert thread needs to be kicked to complete the conv. The hang is caused by an EX req coming into __ocfs2_cluster_lock on the heels of a PR req after it sets BUSY (drops l_lock, releasing EX thread), forcing the incoming EX to wait on BUSY without doing anything. PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR, queues ast. At this time, upconvert (PR ->EX) arrives from node 2, finds conflict with node 1 lock in PR, so the lock res is put on dlm thread's dirty listt. After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till awoken by ast. Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in that order. dlm_shuffle_lists ques a bast on behalf of node 2 (which will be run by dlm_thread right after the ast). ast does its part, sets UPCONVERT_FINISHING, clears BUSY and wakes its waiters. Next, dlm_thread runs bast. It sets BLOCKED and kicks dc thread. dc thread runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing anything and reques. Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead of PR, it wakes up first, finds BLOCKED set and skips doing anything but clearing UPCONVERT_FINISHING (which was actually "meant" for the PR thread), and this time waits on BLOCKED. Next, the PR thread comes out of wait but since UPCONVERT_FINISHING is not set, it skips updating the l_ro_holders and goes straight to wait on BLOCKED. So there, we have a hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb blocked list. Only when dc thread is awoken, it will run ocfs2_unblock_lock and things will unhang. One way to fix this is to wake the dc thread on the flag after clearing UPCONVERT_FINISHING Orabug: 20933419 Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by:
-
Takashi Iwai authored
commit 230323da upstream. Currently ALSA timer device doesn't take the disconnection into account very well; it merely unlinks the timer device at disconnection callback but does nothing else. Because of this, when an application accessing the timer device is disconnected, it may release the resource before actually closed. In most cases, it results in a warning message indicating a leftover timer instance like: ALSA: timer xxxx is busy? But basically this is an open race. This patch tries to address it. The strategy is like other ALSA devices: namely, - Manage card's refcount at each open/close - Wake up the pending tasks at disconnection - Check the shutdown flag appropriately at each possible call Note that this patch has one ugly hack to handle the wakeup of pending tasks. It'd be cleaner to introduce a new disconnect op to snd_timer_instance ops. But since it would lead to internal ABI breakage and it eventually increase my own work when backporting to stable kernels, I took a different path to implement locally in timer.c. A cleanup patch will follow at next for 4.5 kernel. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicholas Bellinger authored
commit 26a99c19 upstream. This patch is a iscsi-target specific bug-fix for a dead-lock that can occur during explicit struct se_node_acl->acl_group se_session deletion via configfs rmdir(2), when iscsi-target time2retain timer is still active. It changes iscsi-target to obtain se_portal_group->session_lock internally using spin_in_locked() to check for the specific se_node_acl configfs shutdown rmdir(2) case. Note this patch is intended for stable, and the subsequent v4.5-rc patch converts target_core_tpg.c to use proper se_sess->sess_kref reference counting for both se_node_acl deletion + se_node_acl->queue_depth se_session restart. Reported-by:
: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Josh Boyer authored
commit edde316a upstream. One of the newest ideapad models also lacks a physical hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. Fix it by adding this model to the DMI list. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293Signed-off-by:
-
Vinit Agnihotri authored
commit fbbeb863 upstream. The current code is problematic when the QP creation and ipoib is used to support NFS and NFS desires to do IO for paging purposes. In that case, the GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory situations. This fix adds support to create queue pair with GFP_NOIO flag for connected mode only to cleanly fail the create queue pair in those situations. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 09dc9cd6 upstream. The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Jean Delvare authored
commit fd7f6727 upstream. I don't think it makes sense for a module to have a soft dependency on itself. This seems quite cyclic by nature and I can't see what purpose it could serve. OTOH libcrc32c calls crypto_alloc_shash("crc32c", 0, 0) so it pretty much assumes that some incarnation of the "crc32c" hash algorithm has been loaded. Therefore it makes sense to have the soft dependency there (as crc-t10dif does.) Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 4f0414e5 upstream. We need to load the TX SG list in sendmsg(2) after waiting for incoming data, not before. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Iwai authored
commit c0bcdbdf upstream. When a TLV ioctl with numid zero is handled, the driver may spew a kernel warning with a stack trace at each call. The check was intended obviously only for a kernel driver, but not for a user interaction. Let's fix it. This was spotted by syzkaller fuzzer. Reported-by:
-
Nicolas Boichat authored
commit 9586495d upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_seq_port_info32 to a struct snd_seq_port_info, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
Nicolas Boichat authored
commit 43c54b8c upstream. This reverts one hunk of commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which replaced a number of kmalloc followed by memcpy with memdup calls. In this case, we are copying from a struct snd_pcm_hw_params32 to a struct snd_pcm_hw_params, but the latter is 4 bytes longer than the 32-bit version, so we need to separate kmalloc and copy calls. This actually leads to an out-of-bounds memory access later on in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan). Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()') Signed-off-by:
-
Takashi Iwai authored
commit 2ba1fe7a upstream. hrtimer_cancel() waits for the completion from the callback, thus it must not be called inside the callback itself. This was already a problem in the past with ALSA hrtimer driver, and the early commit [fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it. However, the previous fix is still insufficient: it may still cause a lockup when the ALSA timer instance reprograms itself in its callback. Then it invokes the start function even in snd_timer_interrupt() that is called in hrtimer callback itself, results in a CPU stall. This is no hypothetical problem but actually triggered by syzkaller fuzzer. This patch tries to fix the issue again. Now we call hrtimer_try_to_cancel() at both start and stop functions so that it won't fall into a deadlock, yet giving some chance to cancel the queue if the functions have been called outside the callback. The proper hrtimer_cancel() is called in anyway at closing, so this should be enough. Reported-and-tested-by:
-
Herbert Xu authored
commit a6a48c56 upstream. This patch forbids the calling of bind(2) when there are child sockets created by accept(2) in existence, even if they are created on the nokey path. This is needed as those child sockets have references to the tfm object which bind(2) will destroy. Signed-off-by:
-
Herbert Xu authored
commit 6a935170 upstream. This patch allows af_alg_release_parent to be called even for nokey sockets. Signed-off-by:
-
Herbert Xu authored
commit a5596d63 upstream. This patch adds a way for ahash users to determine whether a key is required by a crypto_ahash transform. Signed-off-by:
-
Herbert Xu authored
commit 37766586 upstream. This patch adds a compatibility path to support old applications that do acept(2) before setkey. Signed-off-by:
-
Herbert Xu authored
commit a383292c upstream. When we fail an accept(2) call we will end up freeing the socket twice, once due to the direct sk_free call and once again through newsock. This patch fixes this by removing the sk_free call. Reported-by:
-
Herbert Xu authored
commit c840ac6a upstream. Each af_alg parent socket obtained by socket(2) corresponds to a tfm object once bind(2) has succeeded. An accept(2) call on that parent socket creates a context which then uses the tfm object. Therefore as long as any child sockets created by accept(2) exist the parent socket must not be modified or freed. This patch guarantees this by using locks and a reference count on the parent socket. Any attempt to modify the parent socket will fail with EBUSY. Reported-by:
-
Takashi Iwai authored
commit db8948e6 upstream. ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass speaker output pin as other N550 models. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001Signed-off-by:
-
Tejun Heo authored
commit 8d91f8b1 upstream. @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 7625b3a0 upstream. Commit 08d78658 ("panic: release stale console lock to always get the logbuf printed out") introduced an unwanted bad unlock balance report when panic() is called directly and not from OOPS (e.g. from out_of_memory()). The difference is that in case of OOPS we disable locks debug in oops_enter() and on direct panic call nobody does that. Fixes: 08d78658 ("panic: release stale console lock to always get the logbuf printed out") Reported-by:
kernel test robot <ying.huang@linux.intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 08d78658 upstream. In some cases we may end up killing the CPU holding the console lock while still having valuable data in logbuf. E.g. I'm observing the following: - A crash is happening on one CPU and console_unlock() is being called on some other. - console_unlock() tries to print out the buffer before releasing the lock and on slow console it takes time. - in the meanwhile crashing CPU does lots of printk()-s with valuable data (which go to the logbuf) and sends IPIs to all other CPUs. - console_unlock() finishes printing previous chunk and enables interrupts before trying to print out the rest, the CPU catches the IPI and never releases console lock. This is not the only possible case: in VT/fb subsystems we have many other console_lock()/console_unlock() users. Non-masked interrupts (or receiving NMI in case of extreme slowness) will have the same result. Getting the whole console buffer printed out on crash should be top priority. [akpm@linux-foundation.org: tweak comment text] Signed-off-by:
-
Martijn Coenen authored
commit 6611d8d7 upstream. A spare array holding mem cgroup threshold events is kept around to make sure we can always safely deregister an event and have an array to store the new set of events in. In the scenario where we're going from 1 to 0 registered events, the pointer to the primary array containing 1 event is copied to the spare slot, and then the spare slot is freed because no events are left. However, it is freed before calling synchronize_rcu(), which means readers may still be accessing threshold->primary after it is freed. Fixed by only freeing after synchronize_rcu(). Signed-off-by:
Martijn Coenen <maco@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Naoya Horiguchi authored
commit d96b339f upstream. I saw the following BUG_ON triggered in a testcase where a process calls madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that calls migratepages command repeatedly (doing ping-pong among different NUMA nodes) for the first process: Soft offlining page 0x60000 at 0x700000600000 __get_any_page: 0x60000 free buddy page page:ffffea0001800000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x1fffc0000000000() page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/include/linux/mm.h:342! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G O 4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000 RIP: 0010:[<ffffffff8118998c>] [<ffffffff8118998c>] put_page+0x5c/0x60 RSP: 0018:ffff88007c213e00 EFLAGS: 00010246 Call Trace: put_hwpoison_page+0x4e/0x80 soft_offline_page+0x501/0x520 SyS_madvise+0x6bc/0x6f0 entry_SYSCALL_64_fastpath+0x12/0x6a Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47 RIP [<ffffffff8118998c>] put_page+0x5c/0x60 RSP <ffff88007c213e00> The root cause resides in get_any_page() which retries to get a refcount of the page to be soft-offlined. This function calls put_hwpoison_page(), expecting that the target page is putback to LRU list. But it can be also freed to buddy. So the second check need to care about such case. Fixes: af8fae7c ("mm/memory-failure.c: clean up soft_offline_page()") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Kyeongdon Kim authored
commit d913897a upstream. When we're using LZ4 multi compression streams for zram swap, we found out page allocation failure message in system running test. That was not only once, but a few(2 - 5 times per test). Also, some failure cases were continually occurring to try allocation order 3. In order to make parallel compression private data, we should call kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order 2/3 size memory to allocate in that time, page allocation fails. This patch makes to use vmalloc() as fallback of kmalloc(), this prevents page alloc failure warning. After using this, we never found warning message in running test, also It could reduce process startup latency about 60-120ms in each case. For reference a call trace : Binder_1: page allocation failure: order:3, mode:0x10c0d0 CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20 Call trace: dump_backtrace+0x0/0x270 show_stack+0x10/0x1c dump_stack+0x1c/0x28 warn_alloc_failed+0xfc/0x11c __alloc_pages_nodemask+0x724/0x7f0 __get_free_pages+0x14/0x5c kmalloc_order_trace+0x38/0xd8 zcomp_lz4_create+0x2c/0x38 zcomp_strm_alloc+0x34/0x78 zcomp_strm_multi_find+0x124/0x1ec zcomp_strm_find+0xc/0x18 zram_bvec_rw+0x2fc/0x780 zram_make_request+0x25c/0x2d4 generic_make_request+0x80/0xbc submit_bio+0xa4/0x15c __swap_writepage+0x218/0x230 swap_writepage+0x3c/0x4c shrink_page_list+0x51c/0x8d0 shrink_inactive_list+0x3f8/0x60c shrink_lruvec+0x33c/0x4cc shrink_zone+0x3c/0x100 try_to_free_pages+0x2b8/0x54c __alloc_pages_nodemask+0x514/0x7f0 __get_free_pages+0x14/0x5c proc_info_read+0x50/0xe4 vfs_read+0xa0/0x12c SyS_read+0x44/0x74 DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB [minchan@kernel.org: change vmalloc gfp and adding comment about gfp] [sergey.senozhatsky@gmail.com: tweak comments and styles] Signed-off-by:
Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
-
Sergey Senozhatsky authored
commit 3d5fe03a upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by:
-
Takashi Iwai authored
commit b5a663aa upstream. A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by:
-
xuejiufei authored
commit bef5502d upstream. We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by:
Jiufei Xue <xuejiufei@huawei.com> Reviewed-by:
-
Sergey Senozhatsky authored
commit 72214a24 upstream. In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by:
-
