- 12 Mar, 2017 40 commits
-
-
William wu authored
commit 5de4e1ea upstream. The commit 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") move add hcd to the end of probe, this cause hcc_params uninitiated, because xHCI driver sets hcc_params in xhci_gen_setup() called from usb_add_hcd(). This patch checks the Maximum Primary Stream Array Size in the hcc_params register after add primary hcd. Signed-off-by:
William wu <william.wu@rock-chips.com> Acked-by:
Roger Quadros <rogerq@ti.com> Fixes: 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
commit ffb80fc6 upstream. At least macOS seems to be sending ClearFeature(ENDPOINT_HALT) to endpoints which aren't Halted. This makes DWC3's CLEARSTALL command time out which causes several issues for the driver. Instead, let's just return 0 and bail out early. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Alexandre Bailon authored
commit a994ce2d upstream. DA8xx driver is registering and using the CPPI 3.0 DMA controller but actually, the DA8xx has a CPPI 4.1 DMA controller. Remove the CPPI 3.0 quirk and methods. Fixes: f8e9f34f ("usb: musb: Fix up DMA related macros") Fixes: 7f6283ed ("usb: musb: Set up function pointers for DMA") Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 61cd1b4c upstream. ds2490 driver was doing USB transfers from / to buffers on a stack. This is not permitted and made the driver non-working with vmapped stacks. Since all these transfers are done under the same bus_mutex lock we can simply use shared buffers in a device private structure for two most common of them. While we are at it, let's also fix a comparison between int and size_t in ds9490r_search() which made the driver spin in this function if state register get requests were failing. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Maciej S. Szmigiero authored
commit d2ce4ea1 upstream. Near the beginning of w1_attach_slave_device() we increment a w1 master reference count. Later, when we are going to exit this function without actually attaching a slave device (due to failure of __w1_attach_slave_device()) we need to decrement this reference count back. Signed-off-by:
-
Marc Kleine-Budde authored
commit 7c426313 upstream. The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ethan Zonca authored
commit c919a306 upstream. Fixes: 05ca5270 can: gs_usb: add ethtool set_phys_id callback to locate physical device The gs_usb driver is performing USB transfers using buffers allocated on the stack. This causes the driver to not function with vmapped stacks. Instead, allocate memory for the transfer buffers. Signed-off-by:
Ethan Zonca <e@ethanzonca.com> Signed-off-by:
-
Peter Rosin authored
commit 9cf6cdba upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the two bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between them, which accidentally moved the ..._SCALE bit to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE bit since a constant is returned from mpl3115_read_raw for the scale. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes an unintended sysfs attibute to show up that is not backed by code, in turn causing the following NULL pointer defererence to happen on access. Segmentation fault Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ecc3c000 [00000000] *pgd=87f91831 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1051 Comm: cat Not tainted 4.10.0-rc5-00009-gffd8858-dirty #3 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: ed54ec00 task.stack: ee2bc000 PC is at 0x0 LR is at iio_read_channel_info_avail+0x40/0x280 pc : [<00000000>] lr : [<c06fbc1c>] psr: a0070013 sp : ee2bdda8 ip : 00000000 fp : ee2bddf4 r10: c0a53c74 r9 : ed79f000 r8 : ee8d1018 r7 : 00001000 r6 : 00000fff r5 : ee8b9a00 r4 : ed79f000 r3 : ee2bddc4 r2 : ee2bddbc r1 : c0a86dcc r0 : ee8d1000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3cc3c04a DAC: 00000051 Process cat (pid: 1051, stack limit = 0xee2bc210) Stack: (0xee2bdda8 to 0xee2be000) dda0: ee2bddc0 00000002 c016d720 c016d394 ed54ec00 00000000 ddc0: 60070013 ed413780 00000001 edffd480 ee8b9a00 00000fff 00001000 ee8d1018 dde0: ed79f000 c0a53c74 ee2bde0c ee2bddf8 c0513c58 c06fbbe8 edffd480 edffd540 de00: ee2bde3c ee2bde10 c0293474 c0513c40 c02933e4 ee2bde60 00000001 ed413780 de20: 00000001 ed413780 00000000 edffd480 ee2bde4c ee2bde40 c0291d00 c02933f0 de40: ee2bde9c ee2bde50 c024679c c0291ce0 edffd4b0 b6e37000 00020000 ee2bdf78 de60: 00000000 00000000 ed54ec00 ed013200 00000817 c0a111fc edffd540 ed413780 de80: b6e37000 00020000 00020000 ee2bdf78 ee2bded4 ee2bdea0 c0292890 c0246604 dea0: c0117940 c016ba50 00000025 c0a111fc b6e37000 ed413780 ee2bdf78 00020000 dec0: ee2bc000 b6e37000 ee2bdf44 ee2bded8 c021d158 c0292770 c0117764 b6e36004 dee0: c0f0d7c4 ee2bdfb0 b6f89228 00021008 ee2bdfac ee2bdf00 c0101374 c0117770 df00: 00000000 00000000 ee2bc000 00000000 ee2bdf34 ee2bdf20 c016ba04 c0171080 df20: 00000000 00020000 ed413780 b6e37000 00000000 ee2bdf78 ee2bdf74 ee2bdf48 df40: c021e7a0 c021d130 c023e300 c023e280 ee2bdf74 00000000 00000000 ed413780 df60: ed413780 00020000 ee2bdfa4 ee2bdf78 c021e870 c021e71c 00000000 00000000 df80: 00020000 00020000 b6e37000 00000003 c0108084 00000000 00000000 ee2bdfa8 dfa0: c0107ee0 c021e838 00020000 00020000 00000003 b6e37000 00020000 0001a2b4 dfc0: 00020000 00020000 b6e37000 00000003 7fffe000 00000000 00000000 00020000 dfe0: 00000000 be98eb4c 0000c740 b6f1985c 60070010 00000003 00000000 00000000 Backtrace: [<c06fbbdc>] (iio_read_channel_info_avail) from [<c0513c58>] (dev_attr_show+0x24/0x50) r10:c0a53c74 r9:ed79f000 r8:ee8d1018 r7:00001000 r6:00000fff r5:ee8b9a00 r4:edffd480 [<c0513c34>] (dev_attr_show) from [<c0293474>] (sysfs_kf_seq_show+0x90/0x110) r5:edffd540 r4:edffd480 [<c02933e4>] (sysfs_kf_seq_show) from [<c0291d00>] (kernfs_seq_show+0x2c/0x30) r10:edffd480 r9:00000000 r8:ed413780 r7:00000001 r6:ed413780 r5:00000001 r4:ee2bde60 r3:c02933e4 [<c0291cd4>] (kernfs_seq_show) from [<c024679c>] (seq_read+0x1a4/0x4e0) [<c02465f8>] (seq_read) from [<c0292890>] (kernfs_fop_read+0x12c/0x1cc) r10:ee2bdf78 r9:00020000 r8:00020000 r7:b6e37000 r6:ed413780 r5:edffd540 r4:c0a111fc [<c0292764>] (kernfs_fop_read) from [<c021d158>] (__vfs_read+0x34/0x118) r10:b6e37000 r9:ee2bc000 r8:00020000 r7:ee2bdf78 r6:ed413780 r5:b6e37000 r4:c0a111fc [<c021d124>] (__vfs_read) from [<c021e7a0>] (vfs_read+0x90/0x11c) r8:ee2bdf78 r7:00000000 r6:b6e37000 r5:ed413780 r4:00020000 [<c021e710>] (vfs_read) from [<c021e870>] (SyS_read+0x44/0x90) r8:00020000 r7:ed413780 r6:ed413780 r5:00000000 r4:00000000 [<c021e82c>] (SyS_read) from [<c0107ee0>] (ret_fast_syscall+0x0/0x1c) r10:00000000 r8:c0108084 r7:00000003 r6:b6e37000 r5:00020000 r4:00020000 Code: bad PC value ---[ end trace 9c4938ccd0389004 ]--- Fixes: cc26ad45 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver") Fixes: 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") Reported-by:
Ken Lin <ken.lin@advantech.com> Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Peter Rosin authored
commit 6a6e1d56 upstream. Fixes a regression triggered by a change in the layout of struct iio_chan_spec, but the real bug is in the driver which assumed a specific structure layout in the first place. Hint: the three bits were not OR:ed together as implied by the indentation prior to this patch, there was a comma between the first two, which accidentally moved the ..._SCALE and ..._OFFSET bits to the next structure field. That field was .info_mask_shared_by_type before the _available attributes was added by commit 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") and .info_mask_separate_available afterwards, and the regression happened. info_mask_shared_by_type is actually a better choice than the originally intended info_mask_separate for the ..._SCALE and ..._OFFSET bits since a constant is returned from mpl115_read_raw for the scale/offset. Using info_mask_shared_by_type also preserves the behavior from before the regression and is therefore less likely to cause other interesting side effects. The above mentioned regression causes unintended sysfs attibutes to show up that are not backed by code, in turn causing a NULL pointer defererence to happen on access. Fixes: 3017d90e ("iio: Add Freescale MPL115A2 pressure / temperature sensor driver") Fixes: 51239600 ("iio:core: add a callback to allow drivers to provide _available attributes") Signed-off-by:
-
Shanker Donthineni authored
commit 0bdbf3b0 upstream. The IRQFD framework calls the architecture dependent function twice if the corresponding GSI type is edge triggered. For ARM, the function kvm_set_msi() is getting called twice whenever the IRQFD receives the event signal. The rest of the code path is trying to inject the MSI without any validation checks. No need to call the function vgic_its_inject_msi() second time to avoid an unnecessary overhead in IRQ queue logic. It also avoids the possibility of VM seeing the MSI twice. Simple fix, return -1 if the argument 'level' value is zero. Reviewed-by:
Eric Auger <eric.auger@redhat.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mark Rutland authored
commit 7d0928f1 upstream. Since it was introduced in commit da8d02d1 ("arm64/capabilities: Make use of system wide safe value"), __raw_read_system_reg() has erroneously mapped some sysreg IDs to other registers. For the fields in ID_ISAR5_EL1, our local feature detection will be erroneous. We may spuriously detect that a feature is uniformly supported, or may fail to detect when it actually is, meaning some compat hwcaps may be erroneous (or not enforced upon hotplug). This patch corrects the erroneous entries. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Fixes: da8d02d1 ("arm64/capabilities: Make use of system wide safe value") Reported-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Robin Murphy authored
commit adbe7e26 upstream. When bypassing SWIOTLB on small-memory systems, we need to avoid calling into swiotlb_dma_mapping_error() in exactly the same way as we avoid swiotlb_dma_supported(), because the former also relies on SWIOTLB state being initialised. Under the assumptions for which we skip SWIOTLB, dma_map_{single,page}() will only ever return the DMA-offset-adjusted physical address of the page passed in, thus we can report success unconditionally. Fixes: b67a8b29 ("arm64: mm: only initialize swiotlb when necessary") CC: Jisheng Zhang <jszhang@marvell.com> Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 8f36ebaf upstream. When we fault in a page, we flush it to the PoC (Point of Coherency) if the faulting vcpu has its own caches off, so that it can observe the page we just brought it. But if the vcpu has its caches on, we skip that step. Bad things happen when *another* vcpu tries to access that page with its own caches disabled. At that point, there is no garantee that the data has made it to the PoC, and we access stale data. The obvious fix is to always flush to PoC when a page is faulted in, no matter what the state of the vcpu is. Fixes: 2d58b733 ("arm64: KVM: force cache clean on page fault when caches are off") Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Dave Hansen authored
commit 58ab9a08 upstream. Kirill reported a warning from UBSAN about undefined behavior when using protection keys. He is running on hardware that actually has support for it, which is not widely available. The warning triggers because of very large shifts of integers when doing a pkey_free() of a large, invalid value. This happens because we never check that the pkey "fits" into the mm_pkey_allocation_map(). I do not believe there is any danger here of anything bad happening other than some aliasing issues where somebody could do: pkey_free(35); and the kernel would effectively execute: pkey_free(8); While this might be confusing to an app that was doing something stupid, it has to do something stupid and the effects are limited to the app shooting itself in the foot. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-kselftest@vger.kernel.org Cc: shuah@kernel.org Cc: kirill.shutemov@linux.intel.com Link: http://lkml.kernel.org/r/20170223222603.A022ED65@viggo.jf.intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Miklos Szeredi authored
commit 2e38bea9 upstream. fuse_file_put() was missing the "force" flag for the RELEASE request when sending synchronously (fuseblk). If this flag is not set, then a sync request may be interrupted before it is dequeued by the userspace filesystem. In this case the OPEN won't be balanced with a RELEASE. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 5a18ec17 ("fuse: fix hang of single threaded fuseblk filesystem") Signed-off-by:
-
Laura Abbott authored
commit 1c68bb0f upstream. Running with KASAN and crypto tests currently gives BUG: KASAN: global-out-of-bounds in __test_aead+0x9d9/0x2200 at addr ffffffff8212fca0 Read of size 16 by task cryptomgr_test/1107 Address belongs to variable 0xffffffff8212fca0 CPU: 0 PID: 1107 Comm: cryptomgr_test Not tainted 4.10.0+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Call Trace: dump_stack+0x63/0x8a kasan_report.part.1+0x4a7/0x4e0 ? __test_aead+0x9d9/0x2200 ? crypto_ccm_init_crypt+0x218/0x3c0 [ccm] kasan_report+0x20/0x30 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 __test_aead+0x9d9/0x2200 ? kasan_unpoison_shadow+0x35/0x50 ? alg_test_akcipher+0xf0/0xf0 ? crypto_skcipher_init_tfm+0x2e3/0x310 ? crypto_spawn_tfm2+0x37/0x60 ? crypto_ccm_init_tfm+0xa9/0xd0 [ccm] ? crypto_aead_init_tfm+0x7b/0x90 ? crypto_alloc_tfm+0xc4/0x190 test_aead+0x28/0xc0 alg_test_aead+0x54/0xd0 alg_test+0x1eb/0x3d0 ? alg_find_test+0x90/0x90 ? __sched_text_start+0x8/0x8 ? __wake_up_common+0x70/0xb0 cryptomgr_test+0x4d/0x60 kthread+0x173/0x1c0 ? crypto_acomp_scomp_free_ctx+0x60/0x60 ? kthread_create_on_node+0xa0/0xa0 ret_from_fork+0x2c/0x40 Memory state around the buggy address: ffffffff8212fb80: 00 00 00 00 01 fa fa fa fa fa fa fa 00 00 00 00 ffffffff8212fc00: 00 01 fa fa fa fa fa fa 00 00 00 00 01 fa fa fa >ffffffff8212fc80: fa fa fa fa 00 05 fa fa fa fa fa fa 00 00 00 00 ^ ffffffff8212fd00: 01 fa fa fa fa fa fa fa 00 00 00 00 01 fa fa fa ffffffff8212fd80: fa fa fa fa 00 00 00 00 00 05 fa fa fa fa fa fa This always happens on the same IV which is less than 16 bytes. Per Ard, "CCM IVs are 16 bytes, but due to the way they are constructed internally, the final couple of bytes of input IV are dont-cares. Apparently, we do read all 16 bytes, which triggers the KASAN errors." Fix this by padding the IV with null bytes to be at least 16 bytes. Fixes: 0bc5a6c5 ("crypto: testmgr - Disable rfc4309 test and convert test vectors") Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Krister Johansen authored
commit aa33b9b9 upstream. If dso__load_kcore frees all of the existing maps, but one has already been attached to a callchain cursor node, then we can get a SIGSEGV in any function that happens to try to use this invalid cursor. Use the existing map refcount mechanism to forestall cleanup of a map until the cursor iterates past the node. Signed-off-by:
Krister Johansen <kjlx@templeofstupid.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 84c2cafa ("perf tools: Reference count struct map") Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.comSigned-off-by:
-
Vitaly Kuznetsov authored
commit c0bb0392 upstream. DoS protection conditions were altered in WS2016 and now it's easy to get -EAGAIN returned from vmbus_post_msg() (e.g. when we try changing MTU on a netvsc device in a loop). All vmbus_post_msg() callers don't retry the operation and we usually end up with a non-functional device or crash. While host's DoS protection conditions are unknown to me my tests show that it can take up to 10 seconds before the message is sent so doing udelay() is not an option, we really need to sleep. Almost all vmbus_post_msg() callers are ready to sleep but there is one special case: vmbus_initiate_unload() which can be called from interrupt/NMI context and we can't sleep there. I'm also not sure about the lonely vmbus_send_tl_connect_request() which has no in-tree users but its external users are most likely waiting for the host to reply so sleeping there is also appropriate. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Ley Foon Tan authored
commit 2a7275a3 upstream. eb576712 ("PCI: altera: Simplify TLB_CFG_DW0 usage") used TLP_FMTTYPE_CFGRD* (instead of TLP_FMTTYPE_CFGWR*) for TLP writes, which causes writing to configuration space to fail. Fix it by using correct FMTTYPE for write operation. Fixes: eb576712 ("PCI: altera: Simplify TLB_CFG_DW0 usage") Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Gavin Shan authored
commit 49f4b08e upstream. pnv_php_disable_irq() can be called in two paths: Bailing path in pnv_php_enable_irq() or releasing slot. The MSI (or MSIx) interrupts is disabled unconditionally in pnv_php_disable_irq(). It's wrong because that might be enabled by drivers other than pnv-php. This disables MSI (or MSIx) interrupts and the PCI device only if it was enabled by pnv-php. In the error path of pnv_php_enable_irq(), we rely on the newly added parameter @disable_device. In the path of releasing slot, @pnv_php->irq is checked. Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dexuan Cui authored
commit 60e2e2fb upstream. The devfn of 00:02.0 is 0x10. devfn_to_wslot(0x10) == 0x2, and wslot_to_devfn(0x2) should be 0x10, while it's 0x2 in the current code. Due to this, hv_eject_device_work() -> pci_get_domain_bus_and_slot() returns NULL and pci_stop_and_remove_bus_device() is not called. Later when the real device driver's .remove() is invoked by hv_pci_remove() -> pci_stop_root_bus(), some warnings can be noticed because the VM has lost the access to the underlying device at that time. Signed-off-by:
Jake Oshins <jakeo@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> CC: K. Y. Srinivasan <kys@microsoft.com> CC: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Christian Lamparter authored
commit c9f1e326 upstream. This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Fixes: add295a4 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Chris Blake <chrisrblake93@gmail.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
commit 3a5e969b upstream. The code currently relies on refcounting to disable IRQs from within the IRQ handler and re-enabling them again after the tasklet has run. However, due to race conditions sometimes the IRQ handler might be called twice, or the tasklet may not run at all (if interrupted in the middle of a reset). This can cause nasty imbalances in the irq-disable refcount which will get the driver permanently stuck until the entire radio has been stopped and started again (ath_reset will not recover from this). Instead of using this fragile logic, change the code to ensure that running the irq handler during tasklet processing is safe, and leave the refcount untouched. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Felix Fietkau authored
commit a70e1d6f upstream. Simply return -EOPNOTSUPP instead. Signed-off-by:
-
Tamizh chelvam authored
commit cb428152 upstream. Rx filter reset and the dynamic tx switch mode (EXT_RESOURCE_CFG) configuration are causing the following errors when UTF firmware is loaded to the target. Error message 1: [ 598.015629] ath10k_pci 0001:01:00.0: failed to ping firmware: -110 [ 598.020828] ath10k_pci 0001:01:00.0: failed to reset rx filter: -110 [ 598.141556] ath10k_pci 0001:01:00.0: failed to start core (testmode): -110 Error message 2: [ 668.615839] ath10k_ahb a000000.wifi: failed to send ext resource cfg command : -95 [ 668.618902] ath10k_ahb a000000.wifi: failed to start core (testmode): -95 Avoiding these configurations while bringing the target in testmode is solving the problem. Signed-off-by:
Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by:
-
Alexander Usyskin authored
commit cb97fbbc upstream. Parallel reads from multiple threads on a file descriptor are not well defined and racy. It is safer to return to original behavior and simply fail the additional read. The solution is to remove request for next read credit. Fixes: ff1586a7 ("mei: enqueue consecutive reads") Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Mathias Svensson authored
commit 916cafdc upstream. There were some bugs in the JNE64 and JLT64 comparision macros. This fixes them, improves comments, and cleans up the file while we are at it. Reported-by:
Stephen Röttger <sroettger@google.com> Signed-off-by:
Mathias Svensson <idolf@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Theodore Ts'o authored
commit 4753d8a2 upstream. If the file system requires journal recovery, and the device is read-ony, return EROFS to the mount system call. This allows xfstests generic/050 to pass. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 97abd7d4 upstream. If the journal is aborted, the needs_recovery feature flag should not be removed. Otherwise, it's the journal might not get replayed and this could lead to more data getting lost. Signed-off-by:
-
Theodore Ts'o authored
commit eb5efbcb upstream. The write_end() function must always unlock the page and drop its ref count, even on an error. Signed-off-by:
-
Eric Biggers authored
commit dd01b690 upstream. In the case where the child's encryption context was inconsistent with its parent directory, we were using inode->i_sb and inode->i_ino after the inode had already been iput(). Fix this by doing the iput() in the correct places. Note: only ext4 had this bug, not f2fs and ubifs. Fixes: d9cdc903 ("ext4 crypto: enforce context consistency") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Jan Kara authored
commit 3b136499 upstream. ext4_journalled_write_end() did not propely handle all the cases when generic_perform_write() did not copy all the data into the target page and could mark buffers with uninitialized contents as uptodate and dirty leading to possible data corruption (which would be quickly fixed by generic_perform_write() retrying the write but still). Fix the problem by carefully handling the case when the page that is written to is not uptodate. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit cd648b8a upstream. If filesystem groups are artifically small (using parameter -g to mkfs.ext4), ext4_mb_normalize_request() can result in a request that is larger than a block group. Trim the request size to not confuse allocation code. Reported-by:
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Roman Pen authored
commit 03e916fa upstream. Inside ext4_ext_shift_extents() function ext4_find_extent() is called without EXT4_EX_NOCACHE flag, which should prevent cache population. This leads to oudated offsets in the extents tree and wrong blocks afterwards. Patch fixes the problem providing EXT4_EX_NOCACHE flag for each ext4_find_extents() call inside ext4_ext_shift_extents function. Fixes: 331573feSigned-off-by:
Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by:
-
Roman Pen authored
commit 2a9b8cba upstream. While doing 'insert range' start block should be also shifted right. The bug can be easily reproduced by the following test: ptr = malloc(4096); assert(ptr); fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600); assert(fd >= 0); rc = fallocate(fd, 0, 0, 8192); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = 0xbeef; rc = pwrite(fd, ptr, 4096, 0); assert(rc == 4096); rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); for (block = 2; block < 1000; block++) { rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = block; rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); } Because start block is not included in the range the hole appears at the wrong offset (just after the desired offset) and the following pwrite() overwrites already existent block, keeping hole untouched. Simple way to verify wrong behaviour is to check zeroed blocks after the test: $ hexdump ./ext4.file | grep '0000 0000' The root cause of the bug is a wrong range (start, stop], where start should be inclusive, i.e. [start, stop]. This patch fixes the problem by including start into the range. But not to break left shift (range collapse) stop points to the beginning of the a block, not to the end. The other not obvious change is an iterator check on validness in a main loop. Because iterator is unsigned the following corner case should be considered with care: insert a block at 0 offset, when stop variables overflows and never becomes less than start, which is 0. To handle this special case iterator is set to NULL to indicate that end of the loop is reached. Fixes: 331573feSigned-off-by:
-
Omar Sandoval authored
commit e02898b4 upstream. loop_reread_partitions() needs to do I/O, but we just froze the queue, so we end up waiting forever. This can easily be reproduced with losetup -P. Fix it by moving the reread to after we unfreeze the queue. Fixes: ecdd0959 ("block/loop: fix race between I/O and set_status") Reported-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ming Lei authored
commit ecdd0959 upstream. Inside set_status, transfer need to setup again, so we have to drain IO before the transition, otherwise oops may be triggered like the following: divide error: 0000 [#1] SMP KASAN CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006ba1e840 task.stack: ffff880067338000 RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: 0018:ffff88006733f108 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059 RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08 RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000 R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0 Call Trace: lo_do_transfer drivers/block/loop.c:251 [inline] lo_read_transfer drivers/block/loop.c:392 [inline] do_req_filebacked drivers/block/loop.c:541 [inline] loop_handle_cmd drivers/block/loop.c:1677 [inline] loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689 kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08 84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 <f7> 7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83 RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP: ffff88006733f108 ---[ end trace 0166f7bd3b0c0933 ]--- Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Theodore Ts'o authored
commit e112666b upstream. If the journal has been aborted, we shouldn't mark the underlying buffer head as dirty, since that will cause the metadata block to get modified. And if the journal has been aborted, we shouldn't allow this since it will almost certainly lead to a corrupted file system. Signed-off-by:
-
Mathieu Desnoyers authored
commit 90756533 upstream. Userspace applications should be allowed to expect the membarrier system call with MEMBARRIER_CMD_SHARED command to issue memory barriers on nohz_full CPUs, but synchronize_sched() does not take those into account. Given that we do not want unrelated processes to be able to affect real-time sensitive nohz_full CPUs, simply return ENOSYS when membarrier is invoked on a kernel with enabled nohz_full CPUs. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Josh Triplett <josh@joshtriplett.org> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Rik van Riel <riel@redhat.com> Acked-by:
Lai Jiangshan <jiangshanlai@gmail.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Alexandre Belloni authored
commit 0b040874 upstream. LPDDR memories can only handle up to 400 uncontrolled power off. Ensure the proper power off sequence is used before shutting down the platform. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
