- 11 Oct, 2020 8 commits
-
-
Vladimir Oltean authored
Create a test that changes a VLAN ID from 200 to 300. We also need to modify the preferences of the filters installed for the other rules so that they are unique, because we now install the "tc-vlan modify" filter in VCAP IS1 only temporarily, and we need to perform the deletion by filter preference number. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
When the Extraction Frame Header contains a valid classified VLAN, use that instead of the VLAN header present in the packet. Signed-off-by:
-
Vladimir Oltean authored
The VCAP_IS1_ACT_VID_REPLACE_ENA action, from the VCAP IS1 ingress TCAM, changes the classified VLAN. We are only exposing this ability for switch ports that are under VLAN aware bridges. This is because in standalone ports mode and under a bridge with vlan_filtering=0, the ocelot driver configures the switch to operate as VLAN-unaware, so the classified VLAN is not derived from the 802.1Q header from the packet, but instead is always equal to the port-based VLAN ID of the ingress port. We _can_ still change the classified VLAN for packets when operating in this mode, but the end result will most likely be a drop, since both the ingress and the egress port need to be members of the modified VLAN. And even if we install the new classified VLAN into the VLAN table of the switch, the result would still not be as expected: we wouldn't see, on the output port, the modified VLAN tag, but the original one, even though the classified VLAN was indeed modified. This is because of how the hardware works: on egress, what is pushed to the frame is a "port tag", which gives us the following options: - Tag all frames with port tag (derived from the classified VLAN) - Tag all frames with port tag, except if the classified VLAN is 0 or equal to the native VLAN of the egress port - No port tag Needless to say, in VLAN-unaware mode we are disabling the port tag. Otherwise, the existing VLAN tag would be ignored, and a second VLAN tag (the port tag), holding the classified VLAN, would be pushed (instead of replacing the existing 802.1Q tag). This is definitely not what the user wanted when installing a "vlan modify" action. So it is simply not worth bothering with VLAN modify rules under other configurations except when the ports are fully VLAN-aware. Signed-off-by:
-
Jakub Kicinski authored
Claudiu Manoil says: ==================== enetc: Migrate to PHYLINK and PCS_LYNX Transitioning the enetc driver from phylib to phylink. Offloading the serdes configuration to the PCS_LYNX module is a mandatory part of this transition. Aiming for a cleaner, more maintainable design, and better code reuse. The first 2 patches are clean up prerequisites. Tested on a p1028rdb board. v2: validate() explicitly rejects now all interface modes not supported by the driver instead of relying on the device tree to provide only supported interfaces, and dropped redundant activation of pcs_poll (addressing Ioana's findings) ==================== Signed-off-by: -
Claudiu Manoil authored
This is a methodical transition of the driver from phylib to phylink, following the guidelines from sfp-phylink.rst. The MAC register configurations based on interface mode were moved from the probing path to the mac_config() hook. MAC enable and disable commands (enabling Rx and Tx paths at MAC level) were also extracted and assigned to their corresponding phylink hooks. As part of the migration to phylink, the serdes configuration from the driver was offloaded to the PCS_LYNX module, introduced in commit 0da4c3d3 ("net: phy: add Lynx PCS module"), the PCS_LYNX module being a mandatory component required to make the enetc driver work with phylink. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Ioana Ciornei <ioana.cionei@nxp.com> Signed-off-by:
-
Claudiu Manoil authored
As part of the transition of the enetc ethernet driver from phylib to phylink, the in-band operation mode of the SGMII interface from enetc port 0 needs to be specified explicitly for phylink. Signed-off-by:
-
Claudiu Manoil authored
Decouple internal mdio bus creation from serdes configuration, as a prerequisite to offloading serdes configuration to a different module. Group together mdio bus creation routines, cleanup. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Claudiu Manoil authored
Decouple level MAC configuration based on phy interface type from general port configuration. Group together MAC and link configuration code. Decouple external mdio bus creation from interface type parsing. No longer return an (unhandled) error code when phy_node not found, use phy_node to indicate whether the port has a phy or not. No longer fall-through when serdes configuration fails for the link modes that require internal link configuration. Signed-off-by:
-
- 10 Oct, 2020 17 commits
-
-
Xie He authored
Move the skb_headroom check out of fr_hard_header and into pvc_xmit. This has two benefits: 1. Originally we only do this check for skbs sent by users on Ethernet- emulating PVC devices. After the change we do this check for skbs sent on normal PVC devices, too. (Also add a comment to make it clear that this is only a protection against upper layers that don't take dev->needed_headroom into account. Such upper layers should be rare and I believe they should be fixed.) 2. After the change we can simplify the parameter list of fr_hard_header. We no longer need to use a pointer to pointers (skb_p) because we no longer need to replace the skb inside fr_hard_header. Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
Linus Walleij authored
The MTU setting for this DSA switch is global so we need to keep track of the MTU set for each port, then as soon as any MTU changes, roof the MTU to the biggest common denominator and poke that into the switch MTU setting. To achieve this we need a per-chip-variant state container for the RTL8366RB to use for the RTL8366RB-specific stuff. Other SMI switches does seem to have per-port MTU setting capabilities. Fixes: 5f4a8ef3 ("net: dsa: rtl8366rb: Support setting MTU") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Calvin Johnson authored
Better place for of_mdio.c is drivers/net/mdio. Move of_mdio.c from drivers/of to drivers/net/mdio Signed-off-by:
Calvin Johnson <calvin.johnson@oss.nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxim Kochetkov authored
When packets are received on the error queue, this function under net_ratelimit(): netif_err(priv, hw, net_dev, "Err FD status = 0x%08x\n"); does not get printed. Instead we only see: [ 3658.845592] net_ratelimit: 244 callbacks suppressed [ 3663.969535] net_ratelimit: 230 callbacks suppressed [ 3669.085478] net_ratelimit: 228 callbacks suppressed Enabling NETIF_MSG_HW fixes this issue, and we can see some information about the frame descriptors of packets. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Heiner Kallweit authored
Factor out handling the private packet/byte counters to new functions rtl_get_priv_stats() and rtl_inc_priv_stats(). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Obviously this driver version doesn't make sense. Go with the default and let ethtool display the kernel version. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the new struct_size() helper instead of the offsetof() idiom. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2020-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 Fourth and last set of patches for v5.10. Most of these are iwlwifi patches, but few small fixes to other drivers as well. Major changes: iwlwifi * PNVM support (platform-specific phy config data) * bump the FW API support to 59 ==================== Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'mac80211-next-for-net-next-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A handful of changes: * fixes for the recent S1G work * a docbook build time improvement * API to pass beacon rate to lower-level driver ==================== Signed-off-by:
-
Jakub Kicinski authored
Johannes Berg says: ==================== netlink: export policy on validation failures Export the policy used for attribute validation when it fails, so e.g. for an out-of-range attribute userspace immediately gets the valid ranges back. v2 incorporates the suggestion from Jakub to have a function to estimate the size (netlink_policy_dump_attr_size_estimate()) and check that it does the right thing on the *normal* policy dumps, not (just) when calling it from the error scenario. v3 only addresses a few minor style issues. v4 fixes up a forgotten 'git add' ... sorry. v5 is a resend, I messed up v4's cover letter subject (saying v3) and apparently the second patch didn't go out at all. Tested using nl80211/iw in a few scenarios, seems to work fine and return the policy back, e.g. kernel reports: integer out of range policy: 04 00 0b 00 0c 00 04 00 01 00 00 00 00 00 00 00 ^ padding ^ minimum allowed value policy: 04 00 0b 00 0c 00 05 00 ff ff ff ff 00 00 00 00 ^ padding ^ maximum allowed value policy: 08 00 01 00 04 00 00 00 ^ type 4 == U32 for an out-of-range case. ==================== Signed-off-by: -
Johannes Berg authored
Add a new attribute NLMSGERR_ATTR_POLICY to the extended ACK to advertise the policy, e.g. if an attribute was out of range, you'll know the range that's permissible. Add new NL_SET_ERR_MSG_ATTR_POL() and NL_SET_ERR_MSG_ATTR_POL() macros to set this, since realistically it's only useful to do this when the bad attribute (offset) is also returned. Use it in lib/nlattr.c which practically does all the policy validation. v2: - add and use netlink_policy_dump_attr_size_estimate() v3: - remove redundant break v4: - really remove redundant break ... sorry Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Refactor the per-attribute policy writing into a new helper function, to be used later for dumping out the policy of a rejected attribute. v2: - fix some indentation v3: - change variable order in netlink_policy_dump_write() Reviewed-by:
-
Jakub Kicinski authored
Karsten Graul says: ==================== net/smc: updates 2020-10-07 Patch 1 and 2 address warnings from static code checkers, and patch 3 handles a case when all proposed ISM V2 devices fail to init and no V1 devices are tried afterwards. ==================== Signed-off-by: -
Karsten Graul authored
Field ini->smcd_version is set to SMC_V2 before calling smc_listen_ism_init(). This clears the V1 bit that may be set. When all matching ISM V2 devices fail to initialize then the smcd_version field needs to get restored to allow any possible V1 devices to initialize. And be consistent, always go to the not_found label when no device was found. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
coccinelle informs about net/smc/af_smc.c:1770:10-11: WARNING: opportunity for kzfree/kvfree_sensitive Its not that kzfree() would help here, the memset() is done to prepare the buffer for another socket receive. Fix that warning message by reordering the calls, while at it eliminate the unneeded variable cclc2 and use sizeof(*buf) as above in the same function. No functional changes. Signed-off-by:
-
Karsten Graul authored
Static code checkers warn of inconsistent returns because the lgr mutex is locked in one function and unlocked in a function called by the locking function: net/smc/af_smc.c:823 smc_connect_rdma() warn: inconsistent returns 'smc_client_lgr_pending'. net/smc/af_smc.c:897 smc_connect_ism() warn: inconsistent returns 'smc_server_lgr_pending'. Make the code consistent by doing the unlock in the same function that fetches the lock. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-5.10-20201007' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-5.10-20201007 The first 3 patches are by me and fix several warnings found when compiling the kernel with W=1. Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate the renaming of the mcp251xfd driver. Vincent Mailhol contributes 3 patches for the CAN networking layer. First error queue support is added the the CAN RAW protocol. The second patch converts the get_can_dlc() and get_canfd_dlc() in-Kernel-only macros from using __u8 to u8. The third patch adds a helper function to calculate the length of one bit in in multiple of time quanta. Oliver Hartkopp's patch add support for the ISO 15765-2:2016 transport protocol to the CAN stack. Three patches by Lad Prabhakar add documentation for various new rcar controllers to the device tree bindings of the rcar_can and rcan_canfd driver. Michael Walle's patch adds various processors to the flexcan driver binding documentation. The next two patches are by me and target the flexcan driver aswell. The remove the ack_grp and ack_bit from the fsl,stop-mode DT property and the driver, as they are not used anymore. As these are the last two arguments this change will not break existing device trees. The last three patches are by Srinivas Neeli and target the xilinx_can driver. The first one increases the lower limit for the bit rate prescaler to 2, the other two fix sparse and coverity findings. ==================== Signed-off-by:
-
- 09 Oct, 2020 15 commits
-
-
Jakub Kicinski authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-10-07 This series contains updates to ice driver only. Andy Shevchenko changes usage to %*phD format to print small buffer as hex string. Bruce removes repeated words reported by checkpatch. Ani changes ice_info_get_dsn() to return void as it always returns success. Jake adds devlink reporting of fw.app.bundle_id. Moves devlink_port structure to ice_vsi to resolve issues with cleanup. Adds additional debug info for firmware updates. Bixuan Cui resolves -Wpointer-to-int-cast warnings. Dan adds additional packet type masks and checks to prevent overwriting existing Flow Director rules. ==================== Signed-off-by: -
Dan Nowlin authored
A subsequent addition of an IP4 or IP6 rule after other rules would overwrite any existing TCAM entries of related L4 protocols(ex: tcp4 or udp6). This was due to the mask including too many TCAM entries. Add new packet type masks with bits properly excluded so rules are not overwritten. Signed-off-by:
Dan Nowlin <dan.nowlin@intel.com> Signed-off-by:
Henry Tieman <henry.w.tieman@intel.com> Tested-by:
Brijesh Behera <brijeshx.behera@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Bixuan Cui authored
pointers should be casted to unsigned long to avoid -Wpointer-to-int-cast warnings: drivers/net/ethernet/intel/ice/ice_flow.h:197:33: warning: cast from pointer to integer of different size drivers/net/ethernet/intel/ice/ice_flow.h:198:32: warning: cast to pointer from integer of different size Signed-off-by:Bixuan Cui <cuibixuan@huawei.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Jacob Keller authored
While debugging a recent failure to update the flash of an ice device, I found it helpful to add additional logging which helped determine the root cause of the problem being a timeout issue. Add some extra dev_dbg() logging messages which can be enabled using the dynamic debug facility, including one for ice_aq_wait_for_event that will use jiffies to capture a rough estimate of how long we waited for the completion of a firmware command. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
Currently, the devlink_port structure is stored within the ice_pf. This made sense because we create a single devlink_port for each PF. This setup does not mesh with the abstractions in the driver very well, and led to a flow where we accidentally call devlink_port_unregister twice during error cleanup. In particular, if devlink_port_register or devlink_port_unregister are called twice, this leads to a kernel panic. This appears to occur during some possible flows while cleaning up from a failure during driver probe. If register_netdev fails, then we will call devlink_port_unregister in ice_cfg_netdev as it cleans up. Later, we again call devlink_port_unregister since we assume that we must cleanup the port that is associated with the PF structure. This occurs because we cleanup the devlink_port for the main PF even though it was not allocated. We allocated the port within a per-VSI function for managing the main netdev, but did not release the port when cleaning up that VSI, the allocation and destruction are not aligned. Instead of attempting to manage the devlink_port as part of the PF structure, manage it as part of the PF VSI. Doing this has advantages, as we can match the de-allocation of the devlink_port with the unregister_netdev associated with the main PF VSI. Moving the port to the VSI is preferable as it paves the way for handling devlink ports allocated for other purposes such as SR-IOV VFs. Since we're changing up how we allocate the devlink_port, also change the indexing. Originally, we indexed the port using the PF id number. This came from an old goal of sharing a devlink for each physical function. Managing devlink instances across multiple function drivers is not workable. Instead, lets set the port number to the logical port number returned by firmware and set the index using the VSI index (sometimes referred to as VSI handle). Signed-off-by:
-
Jacob Keller authored
Add "fw.app.bundle_id" to display the DDP Track ID of the active DDP package. This id is similar to "fw.bundle_id" and is a unique identifier for the DDP package that is loaded in the device. Each new DDP has a unique Track ID generated for it, and the ID can be used to identify and track the DDP package. Add documentation for the new devlink info version. Signed-off-by:
-
Anirudh Venkataramanan authored
ice_info_get_dsn always returns 0, so just make it void. Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
-
Bruce Allan authored
A new test in checkpatch detects repeated words; cleanup all pre-existing occurrences of those now. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Andy Shevchenko authored
Use %*phD format to print small buffer as hex string. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Christian Eggers authored
Add support for the KSZ9563 3-Port Gigabit Ethernet Switch to the ksz9477 driver. The KSZ9563 supports both SPI (already in) and I2C. The ksz9563 is already in the device tree binding documentation. Signed-off-by:
Christian Eggers <ceggers@arri.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Manjunath Patil authored
RDS/IB tries to refill the recv buffer in softirq context using GFP_NOWAIT flag. However alloc failure is handled by queueing a work to refill the recv buffer with GFP_KERNEL flag. This means failure to allocate with GFP_NOWAIT isn't fatal. Do not print the PAF warnings if softirq context fails to refill the recv buffer. We will see the PAF warnings when worker also fails to allocate. Signed-off-by:
Manjunath Patil <manjunath.b.patil@oracle.com> Reviewed-by:
Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Signed-off-by:
-
Jakub Kicinski authored
Moshe Shemesh says: ==================== Add devlink reload action and limit options Introduce new options on devlink reload API to enable the user to select the reload action required and constrains limits on these actions that he may want to ensure. Complete support for reload actions in mlx5. The following reload actions are supported: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. The uAPI is backward compatible, if the reload action option is omitted from the reload command, the driver reinit action will be used. Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. By default reload actions are not limited and driver implementation may include reset or downtime as needed to perform the actions. However, if reload limit is selected, the driver should perform only if it can do it while keeping the limit constraints. Reload limit added: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. Each driver which supports devlink reload command should expose the reload actions and limits supported. Add reload stats to hold the history per reload action per limit. For example, the number of times fw_activate has been done on this device since the driver module was added or if the firmware activation was done with or without reset. Patch 1 changes devlink_reload_supported() param type to enable using it before allocating devlink. Patch 2-3 add the new API reload action and reload limit options to devlink reload. Patch 4-5 add reload stats and remote reload stats. These stats are exposed through devlink dev get. Patches 6-11 add support on mlx5 for devlink reload action fw_activate and handle the firmware reset events. Patches 12-13 add devlink enable remote dev reset parameter and use it in mlx5. Patches 14-15 mlx5 add devlink reload limit no_reset support for fw_activate reload action. Patch 16 adds documentation file devlink-reload.rst ==================== Signed-off-by: -
Moshe Shemesh authored
Add devlink reload rst documentation file. Update index file to include it. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Add support for devlink reload action fw_activate with reload limit no_reset which does firmware live patching, updating the firmware image without reset, no downtime and no configuration lose. The driver checks if the firmware is capable of handling the pending firmware changes as a live patch. If it is then it triggers firmware live patching flow. Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
Firmware live patch event notifies the driver that the firmware was just updated using live patch. In such case the driver should not reload or re-initiate entities, part to updating the firmware version and re-initiate the firmware tracer which can be updated by live patch with new strings database to help debugging an issue. Signed-off-by:
-
