- 13 Sep, 2022 15 commits
-
-
Nicholas Kazlauskas authored
[Why] HW can support the display swizzle modes for video, and those are preferable over standard or linear for decode use. [How] Remove the check for DCN314. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why & How] Add support for the DML314 functions and hook up DCN314 to use them. This has some necessary additions for calculating Max VSTARTUP for future features, but there's also some changes that we have to make for pixel format/swizzle support. That will come in a following patch to make this transition easier to bisect. Tested-by:
-
Rodrigo Siqueira authored
We were not using the VBA and DLG files for DCN314, but the next sequence of changes for DCN314 will require those files. This commit adds the necessary files to the Makefile. Cc: Roman Li <roman.li@amd.com> Tested-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
We have some compilation errors in some DML files from DCN314 that we never noticed because we were not compiling some of the DML files. This commit fixes those syntax errors before we enable the compilation. Cc: Roman Li <roman.li@amd.com> Tested-by:
-
Aric Cyr authored
[why] Incorrectly using MicroTileWidth instead of MacroTileWidth for calculations. [how] Remove all unused references to MicroTile and change them to MacroTile. Tested-by:
Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Leo Chen authored
[Why & How] DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software. Removed all instances of resetting the register to 0 Tested-by:
Leo Chen <sancchen@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] Update MBLK calculation according to hardware doc. For DCC case we were not allocation enough MALL due to an inaccurate MBLK calculation. Tested-by:
-
Aurabindo Pillai authored
This reverts commit a4f1b042 since returning false in case of SubVP results in no cursor being visible on desktop as there is no sw cursor fallback path on all platforms. Tested-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Candice Li authored
No need to reset error status since only umc ras supported on psp v13_0_0. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Was missing before and would have resulted in a write to a non-existant register. Normally APUs don't use HDP, but other asics could use this code and APUs do use the HDP when used in passthrough. Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Yang Wang authored
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
-
Candice Li authored
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by:
-
Hamza Mahfooz authored
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
-
Lijo Lazar authored
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by:
Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by:
-
Guchun Chen authored
To avoid hardware intermittent failures. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
- 09 Sep, 2022 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2022-09-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix MIPI sequence block copy from BIOS' table. (Ville) - Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo) - Implement Workaround for eDP. (Ville) - Fix has_flat_ccs selection for DG1. (Matt) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yxn1WpmUJnJpqq23@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull: * edid: Fix EDID 1.4 range-descriptor parsing * panfrost: Fix devfreq OPP * ttm: Fix ghost-object bulk moves Signed-off-by:
-
- 08 Sep, 2022 9 commits
-
-
Clément Péron authored
Enabling panfrost GPU OPP with dynamic regulator will make OPP responsible to enable and configure it. Unfortunately OPP configure and enable the regulator when an OPP is asked to be set, which is not the case during panfrost_devfreq_init(). This leave the regulator unconfigured and if no GPU load is triggered, no OPP is asked to be set which make the regulator framework switching it off during regulator_late_cleanup() without noticing and therefore make the board hang as any access to GPU memory space make bus locks up. Call dev_pm_opp_set_opp() with the recommend OPP in panfrost_devfreq_init() to enable the regulator, this will properly configure and enable the regulator and will avoid any switch off by regulator_late_cleanup(). Suggested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Clément Péron <peron.clem@gmail.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Christian König authored
Otherwise lockdep will complain about cleaning up the bulk_move. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907100051.570641-1-christian.koenig@amd.com Fixes: d91c411c ("drm/ttm: update bulk move object of ghost BO")
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.0-2022-09-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-07: amdgpu: - Firmware header fix - SMU 13.x fix - Debugfs memory leak fix - NBIO 7.7 fix - Firmware memory leak fix amdkfd: - Debug output fix Signed-off-by:
-
Guchun Chen authored
It's missed in psp fini. Signed-off-by:
-
Yifan Zhang authored
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Xiaojian Du <Xiaojian.Du@amd.com> Signed-off-by:
-
Yifan Zhang authored
Addresses should be printed in hex format. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: hersen wu <hersenxs.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Thelford Williams <tdwilliamsiv@gmail.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Yongzhi Liu <lyz_cs@pku.edu.cn> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Evan Quan authored
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU 13.0.7. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Chengming Gui authored
Add missing structure to avoid incorrect size and version check. Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
- 06 Sep, 2022 5 commits
-
-
Matthew Auld authored
Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on DG1, even though it doesn't have small-BAR or flat-CCS. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605 Fixes: efeb3caf ("drm/i915/ttm: disallow CPU fallback mode for ccs pages") Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com (cherry picked from commit 873fef88) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
A lot of modern laptops use the Parade PS8461E MUX for eDP switching. The MUX can operate in jitter cleaning mode or redriver mode, the first one resulting in higher link quality. The jitter cleaning mode needs to know the link rate used and the MUX achieves this by snooping the LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES DPCD accesses. When the MUX is powered down (seems this can happen whenever the display is turned off) it loses track of the snooped link rates so when we do the LINK_RATE_SELECT write it no longer knowns which link rate we're selecting, and thus it falls back to the lower quality redriver mode. This results in unstable high link rates (eg. usually 8.1Gbps link rate no longer works correctly). In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES from the sink at the start of every link training. Unfortunately we don't have a way to detect the presence of the MUX. It looks like the set of laptops equipped with this MUX is fairly large and contains devices from multiple manufacturers. It may also still be growing with new models. So a quirk doesn't seem like a very easily maintainable option, thus we shall attempt to do this unconditionally on all machines that use LINK_RATE_SELECT. Hopefully this extra DPCD read doesn't cause issues for any unaffected machine. If that turns out to be the case we'll need to convert this into a quirk in the future. Cc: stable@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.comTested-by:
Aaron Ma <aaron.ma@canonical.com> Tested-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 25899c59) Signed-off-by:
-
Rodrigo Vivi authored
We need to inform PCODE of a desired ring frequencies so PCODE update the memory frequencies to us. rps->min_freq and rps->max_freq are the frequencies used in that request. However they were unset when SLPC was enabled and PCODE never updated the memory freq. v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right frequencies from the get_ia_constants instead of the fake init of rps' min and max. v3: don't forget the max <= min return v4: Move all the freq conversion to intel_rps.c. And the max <= min check to where it belongs. v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining the "raw format" Fixes: 7ba79a67 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled") Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Tested-by:Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com (cherry picked from commit 018a7bdb) Signed-off-by:
-
Ville Syrjälä authored
Turns out the MIPI sequence block version number and new block size fields are considered part of the block header and are not included in the reported new block size field itself. Bump up the block size appropriately so that we'll copy over the last five bytes of the block as well. For this particular machine those last five bytes included parts of the GPIO op for the backlight on sequence, causing the backlight no longer to turn back on: Sequence 6 - MIPI_SEQ_BACKLIGHT_ON Delay: 20000 us - GPIO index 0, number 0, set 0 (0x00) + GPIO index 1, number 70, set 1 (0x01) Cc: stable@vger.kernel.org Fixes: e163cfb4 ("drm/i915/bios: Make copies of VBT data blocks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652Signed-off-by:
-
ZhenGuo Yin authored
[Why] Ghost BO is released with non-empty bulk move object. There is a warning trace: WARNING: CPU: 19 PID: 1582 at ttm/ttm_bo.c:366 ttm_bo_release+0x2e1/0x2f0 [amdttm] Call Trace: amddma_resv_reserve_fences+0x10d/0x1f0 [amdkcl] amdttm_bo_put+0x28/0x30 [amdttm] amdttm_bo_move_accel_cleanup+0x126/0x200 [amdttm] amdgpu_bo_move+0x1a8/0x770 [amdgpu] ttm_bo_handle_move_mem+0xb0/0x140 [amdttm] amdttm_bo_validate+0xbf/0x100 [amdttm] [How] The resource of ghost BO should be moved to LRU directly, instead of using bulk move. The bulk move object of ghost BO should set to NULL before function ttm_bo_move_to_lru_tail_unlocked. v2: set bulk move to NULL manually if no resource associated with ghost BO Fixed: 5b951e487fd6bf5f ("drm/ttm: fix bulk move handling v2") Signed-off-by:ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by:
-
- 04 Sep, 2022 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix handling of PCI domains in /proc on 32-bit systems using the recently added support for numbering buses from zero for each domain. - A fix and a revert for some changes to use READ/WRITE_ONCE() which caused problems with KASAN enabled due to sanitisation calls being introduced in low-level paths that can't cope with it. - Fix build errors on 32-bit caused by the syscall table being misaligned sometimes. - Two fixes to get IBM Cell native machines booting again, which had bit-rotted while my QS22 was temporarily out of action. - Fix the papr_scm driver to not assume the order of events returned by the hypervisor is stable, and a related compile fix. Thanks to Aneesh Kumar K.V, Christophe Leroy, Jordan Niethe, Kajol Jain, Masahiro Yamada, Nathan Chancellor, Pali Rohár, Vaibhav Jain, and Zhouyi Zhou. * tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Ensure rc is always initialized in papr_scm_pmu_register() Revert "powerpc/irq: Don't open code irq_soft_mask helpers" powerpc: Fix hard_irq_disable() with sanitizer powerpc/rtas: Fix RTAS MSR[HV] handling for Cell Revert "powerpc: Remove unused FW_FEATURE_NATIVE references" powerpc: align syscall table for ppc32 powerpc/pci: Enable PCI domains in /proc when PCI bus numbers are not unique powerpc/papr_scm: Fix nvdimm event mappings
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "s390: - PCI interpretation compile fixes RISC-V: - fix unused variable warnings in vcpu_timer.c - move extern sbi_ext declarations to a header x86: - check validity of argument to KVM_SET_MP_STATE - use guest's global_ctrl to completely disable guest PEBS - fix a memory leak on memory allocation failure - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES - fix build failure with Clang integrated assembler - fix MSR interception - always flush TLBs when enabling dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check validity of argument to KVM_SET_MP_STATE perf/x86/core: Completely disable guest PEBS via guest's global_ctrl KVM: x86: fix memoryleak in kvm_arch_vcpu_create() KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES KVM: s390: pci: Hook to access KVM lowlevel from VFIO riscv: kvm: move extern sbi_ext declarations to a header riscv: kvm: vcpu_timer: fix unused variable warnings KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE() KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang KVM: VMX: Heed the 'msr' argument in msr_write_intercepted() kvm: x86: mmu: Always flush TLBs when enabling dirty logging kvm: x86: mmu: Drop the need_remote_flush() function
-
Nick Desaulniers authored
-Wformat was recently re-enabled for builds with clang, then quickly re-disabled, due to concerns stemming from the frequency of default argument promotion related warning instances. commit 258fafcd ("Makefile.extrawarn: re-enable -Wformat for clang") commit 21f9c8a1 ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"") ISO WG14 has ratified N2562 to address default argument promotion explicitly for printf, as part of the upcoming ISO C2X standard. The behavior of clang was changed in clang-16 to not warn for the cited cases in all language modes. Add a version check, so that users of clang-16 now get the full effect of -Wformat. For older clang versions, re-enable flags under the -Wformat group that way users still get some useful checks related to format strings, without noisy default argument promotion warnings. I intentionally omitted -Wformat-y2k and -Wformat-security from being re-enabled, which are also part of -Wformat in clang-16. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Link: https://github.com/llvm/llvm-project/issues/57102 Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdfSuggested-by:
Justin Stitt <jstitt007@gmail.com> Suggested-by:
Nathan Chancellor <nathan@kernel.org> Suggested-by:
Youngmin Nam <youngmin.nam@samsung.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: "A a set of fixes from the GPIO subsystem. Most are small driver fixes except the realtek-otto driver patch which is pretty big but addresses a significant flaw that can cause the CPU to stay infinitely busy on uncleared ISR on some platforms. Summary: - MAINTAINERS update - fix resource leaks in gpio-mockup and gpio-pxa - add missing locking in gpio-pca953x - use 32-bit I/O in gpio-realtek-otto - make irq_chip structures immutable in four more drivers" * tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ws16c48: Make irq_chip immutable gpio: 104-idio-16: Make irq_chip immutable gpio: 104-idi-48: Make irq_chip immutable gpio: 104-dio-48e: Make irq_chip immutable gpio: realtek-otto: switch to 32-bit I/O gpio: pca953x: Add mutex_lock for regcache sync in PM gpio: mockup: remove gpio debugfs when remove device gpio: pxa: use devres for the clock struct MAINTAINERS: rectify entry for XILINX GPIO DRIVER
-
- 03 Sep, 2022 4 commits
-
-
William Breathitt Gray authored
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by:William Breathitt Gray <william.gray@linaro.org> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl>
-
William Breathitt Gray authored
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: -
William Breathitt Gray authored
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: -
William Breathitt Gray authored
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by:
-
