When a kernel module is unbound but the pin resources were not entirely
freed (other kernel module instance of the same PCI device have had kept
the reference to that pin), and kernel module is again bound, the pin
properties would not be updated (the properties are only assigned when
memory for the pin is allocated), prop pointer still points to the
kernel module memory of the kernel module which was deallocated on the
unbind.

If the pin dump is invoked in this state, the result is a kernel crash.
Prevent the crash by storing persistent pin properties in dpll subsystem,
copy the content from the kernel module when pin is allocated, instead of
using memory of the kernel module.

Fixes: 9431063a ("dpll: core: Add DPLL framework base functions")
Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions")
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If pin type is not expected, or pin properities failed to allocate
memory, the unwind error path shall not destroy pin's xarrays, which
were not yet initialized.
Add new goto label and use it to fix broken error path.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yunjian Wang says:

====================
fixes for tun

There are few places on the receive path where packet receives and
packet drops were not accounted for. This patchset fixes that issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The TUN can be used as vhost-net backend, and it is necessary to
count the packets transmitted from TUN to vhost-net/virtio-net.
However, there are some places in the receive path that were not
taken into account when using XDP. It would be beneficial to also
include new accounting for successfully received bytes using
dev_sw_netstats_rx_add.

Fixes: 761876c8 ("tap: XDP support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 8ae1aff0 ("tuntap: split out XDP logic") includes
dropped counter for XDP_DROP, XDP_ABORTED, and invalid XDP actions.
Unfortunately, that commit missed the dropped counter when error
occurs during XDP_TX and XDP_REDIRECT actions. This patch fixes
this issue.

Fixes: 8ae1aff0 ("tuntap: split out XDP logic")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark reports a BUG() when a net namespace is removed.

    kernel BUG at net/core/dev.c:11520!

Physical interfaces moved outside of init_net get "refunded"
to init_net when that namespace disappears. The main interface
name may get overwritten in the process if it would have
conflicted. We need to also discard all conflicting altnames.
Recent fixes addressed ensuring that altnames get moved
with the main interface, which surfaced this problem.
Reported-by: Марк Коренберг <socketpair@gmail.com>
Link: https://lore.kernel.org/all/CAEmTpZFZ4Sv3KwqFOY2WKDHeZYdi0O7N5H1nTvcGp=SAEavtDg@mail.gmail.com/
Fixes: 7663d522 ("net: check for altname conflicts when changing netdev's netns")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

idpf registers multiple netdevs (virtual ports) for one PCI function,
but it does not provide a way for userspace to distinguish them with
sysfs attributes. Per Documentation/ABI/testing/sysfs-class-net, it is
a bug not to set dev_port for independent ports on the same PCI bus,
device and function.

Without dev_port set, systemd-udevd's default naming policy attempts
to assign the same name ("ens2f0") to all four idpf netdevs on my test
system and obviously fails, leaving three of them with the initial
eth<N> name.

With this patch, systemd-udevd is able to assign unique names to the
netdevs (e.g. "ens2f0", "ens2f0d1", "ens2f0d2", "ens2f0d3").

The Intel-provided out-of-tree idpf driver already sets dev_port. In
this patch I chose to do it in the same place in the idpf_cfg_netdev
function.

Fixes: 0fe45467 ("idpf: add create vport and netdev configuration")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.

Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue

In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.

v3: - make sk_busy_loop_end() nicer (Willem)

v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
    - add a sk_is_inet() check in sk_is_udp() (Willem feedback)
    - add a sk_is_inet() check in sk_is_tcp().

Fixes: 2276f58a ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported an uninit-value bug below. [0]

llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2
(0x0011), and syzbot abused the latter to trigger the bug.

  write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16)

llc_conn_handler() initialises local variables {saddr,daddr}.mac
based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes
them to __llc_lookup().

However, the initialisation is done only when skb->protocol is
htons(ETH_P_802_2), otherwise, __llc_lookup_established() and
__llc_lookup_listener() will read garbage.

The missing initialisation existed prior to commit 211ed865
("net: delete all instances of special processing for token ring").

It removed the part to kick out the token ring stuff but forgot to
close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv().

Let's remove llc_tr_packet_type and complete the deprecation.

[0]:
BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90
 __llc_lookup_established+0xe9d/0xf90
 __llc_lookup net/llc/llc_conn.c:611 [inline]
 llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791
 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206
 __netif_receive_skb_one_core net/core/dev.c:5527 [inline]
 __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641
 netif_receive_skb_internal net/core/dev.c:5727 [inline]
 netif_receive_skb+0x58/0x660 net/core/dev.c:5786
 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
 call_write_iter include/linux/fs.h:2020 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x8ef/0x1490 fs/read_write.c:584
 ksys_write+0x20f/0x4c0 fs/read_write.c:637
 __do_sys_write fs/read_write.c:649 [inline]
 __se_sys_write fs/read_write.c:646 [inline]
 __x64_sys_write+0x93/0xd0 fs/read_write.c:646
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Local variable daddr created at:
 llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783
 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206

CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c410411 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023

Fixes: 211ed865 ("net: delete all instances of special processing for token ring")
Reported-by: syzbot+b5ad66046b913bc04c6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b5ad66046b913bc04c6fSigned-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240119015515.61898-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no
headroom, but subsequently trying to push 14 bytes of Ethernet header [1]

Like some others, llc_ui_sendmsg() releases the socket lock before
calling sock_alloc_send_skb().
Then it acquires it again, but does not redo all the sanity checks
that were performed.

This fix:

- Uses LL_RESERVED_SPACE() to reserve space.
- Check all conditions again after socket lock is held again.
- Do not account Ethernet header for mtu limitation.

[1]

skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0

 kernel BUG at net/core/skbuff.c:193 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : skb_panic net/core/skbuff.c:189 [inline]
 pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203
 lr : skb_panic net/core/skbuff.c:189 [inline]
 lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203
sp : ffff800096f97000
x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000
x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2
x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0
x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce
x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001
x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400
x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089
Call trace:
  skb_panic net/core/skbuff.c:189 [inline]
  skb_under_panic+0x13c/0x140 net/core/skbuff.c:203
  skb_push+0xf0/0x108 net/core/skbuff.c:2451
  eth_header+0x44/0x1f8 net/ethernet/eth.c:83
  dev_hard_header include/linux/netdevice.h:3188 [inline]
  llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33
  llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85
  llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline]
  llc_sap_next_state net/llc/llc_sap.c:182 [inline]
  llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209
  llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270
  llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  sock_sendmsg+0x194/0x274 net/socket.c:767
  splice_to_socket+0x7cc/0xd58 fs/splice.c:881
  do_splice_from fs/splice.c:933 [inline]
  direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142
  splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088
  do_splice_direct+0x20c/0x348 fs/splice.c:1194
  do_sendfile+0x4bc/0xc70 fs/read_write.c:1254
  __do_sys_sendfile64 fs/read_write.c:1322 [inline]
  __se_sys_sendfile64 fs/read_write.c:1308 [inline]
  __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308
  __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
  invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
  el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
  do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
  el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678
  el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
  el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595
Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000)

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+2a7024e9502df538e8ef@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240118183625.4007013-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the vlan_changelink function, a loop is used to parse the nested
attributes IFLA_VLAN_EGRESS_QOS and IFLA_VLAN_INGRESS_QOS in order to
obtain the struct ifla_vlan_qos_mapping. These two nested attributes are
checked in the vlan_validate_qos_map function, which calls
nla_validate_nested_deprecated with the vlan_map_policy.

However, this deprecated validator applies a LIBERAL strictness, allowing
the presence of an attribute with the type IFLA_VLAN_QOS_UNSPEC.
Consequently, the loop in vlan_changelink may parse an attribute of type
IFLA_VLAN_QOS_UNSPEC and believe it carries a payload of
struct ifla_vlan_qos_mapping, which is not necessarily true.

To address this issue and ensure compatibility, this patch introduces two
type checks that skip attributes whose type is not IFLA_VLAN_QOS_MAPPING.

Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240118130306.1644001-1-linma@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says:

====================
bnxt_en: Bug fixes

This series contains 5 miscellaneous fixes.  The fixes include adding
delay for FLR, buffer memory leak, RSS table size calculation,
ethtool self test kernel warning, and mqprio crash.
====================

Link: https://lore.kernel.org/r/20240117234515.226944-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The driver relies on netdev_get_num_tc() to get the number of HW
offloaded mqprio TCs to allocate and free TX rings.  This won't
work and can potentially crash the system if software mqprio or
taprio TCs have been setup.  netdev_get_num_tc() will return the
number of software TCs and it may cause the driver to allocate or
free more TX rings that it should.  Fix it by adding a bp->num_tc
field to store the number of HW offload mqprio TCs for the device.
Use bp->num_tc instead of netdev_get_num_tc().

This fixes a crash like this:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 42b8404067 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 120 PID: 8661 Comm: ifconfig Kdump: loaded Tainted: G           OE     5.18.16 #1
Hardware name: Lenovo ThinkSystem SR650 V3/SB27A92818, BIOS ESE114N-2.12 04/25/2023
RIP: 0010:bnxt_hwrm_cp_ring_alloc_p5+0x10/0x90 [bnxt_en]
Code: 41 5c 41 5d 41 5e c3 cc cc cc cc 41 8b 44 24 08 66 89 03 eb c6 e8 b0 f1 7d db 0f 1f 44 00 00 41 56 41 55 41 54 55 48 89 fd 53 <48> 8b 06 48 89 f3 48 81 c6 28 01 00 00 0f b6 96 13 ff ff ff 44 8b
RSP: 0018:ff65907660d1fa88 EFLAGS: 00010202
RAX: 0000000000000010 RBX: ff4dde1d907e4980 RCX: f400000000000000
RDX: 0000000000000010 RSI: 0000000000000000 RDI: ff4dde1d907e4980
RBP: ff4dde1d907e4980 R08: 000000000000000f R09: 0000000000000000
R10: ff4dde5f02671800 R11: 0000000000000008 R12: 0000000088888889
R13: 0500000000000000 R14: 00f0000000000000 R15: ff4dde5f02671800
FS:  00007f4b126b5740(0000) GS:ff4dde9bff600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000416f9c6002 CR4: 0000000000771ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 bnxt_hwrm_ring_alloc+0x204/0x770 [bnxt_en]
 bnxt_init_chip+0x4d/0x680 [bnxt_en]
 ? bnxt_poll+0x1a0/0x1a0 [bnxt_en]
 __bnxt_open_nic+0xd2/0x740 [bnxt_en]
 bnxt_open+0x10b/0x220 [bnxt_en]
 ? raw_notifier_call_chain+0x41/0x60
 __dev_open+0xf3/0x1b0
 __dev_change_flags+0x1db/0x250
 dev_change_flags+0x21/0x60
 devinet_ioctl+0x590/0x720
 ? avc_has_extended_perms+0x1b7/0x420
 ? _copy_from_user+0x3a/0x60
 inet_ioctl+0x189/0x1c0
 ? wp_page_copy+0x45a/0x6e0
 sock_do_ioctl+0x42/0xf0
 ? ioctl_has_perm.constprop.0.isra.0+0xbd/0x120
 sock_ioctl+0x1ce/0x2e0
 __x64_sys_ioctl+0x87/0xc0
 do_syscall_64+0x59/0x90
 ? syscall_exit_work+0x103/0x130
 ? syscall_exit_to_user_mode+0x12/0x30
 ? do_syscall_64+0x69/0x90
 ? exc_page_fault+0x62/0x150

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-6-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We call bnxt_half_open_nic() to setup the chip partially to run
loopback tests.  The rings and buffers are initialized normally
so that we can transmit and receive packets in loopback mode.
That means page pool buffers are allocated for the aggregation ring
just like the normal case.  NAPI is not needed because we are just
polling for the loopback packets.

When we're done with the loopback tests, we call bnxt_half_close_nic()
to clean up.  When freeing the page pools, we hit a WARN_ON()
in page_pool_unlink_napi() because the NAPI state linked to the
page pool is uninitialized.

The simplest way to avoid this warning is just to initialize the
NAPIs during half open and delete the NAPIs during half close.
Trying to skip the page pool initialization or skip linking of
NAPI during half open will be more complicated.

This fix avoids this warning:

WARNING: CPU: 4 PID: 46967 at net/core/page_pool.c:946 page_pool_unlink_napi+0x1f/0x30
CPU: 4 PID: 46967 Comm: ethtool Tainted: G S      W          6.7.0-rc5+ #22
Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021
RIP: 0010:page_pool_unlink_napi+0x1f/0x30
Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 18 48 85 c0 74 1b 48 8b 50 10 83 e2 01 74 08 8b 40 34 83 f8 ff 74 02 <0f> 0b 48 c7 47 18 00 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90
RSP: 0018:ffa000003d0dfbe8 EFLAGS: 00010246
RAX: ff110003607ce640 RBX: ff110010baf5d000 RCX: 0000000000000008
RDX: 0000000000000000 RSI: ff110001e5e522c0 RDI: ff110010baf5d000
RBP: ff11000145539b40 R08: 0000000000000001 R09: ffffffffc063f641
R10: ff110001361eddb8 R11: 000000000040000f R12: 0000000000000001
R13: 000000000000001c R14: ff1100014553a080 R15: 0000000000003fc0
FS:  00007f9301c4f740(0000) GS:ff1100103fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91344fa8f0 CR3: 00000003527cc005 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 ? __warn+0x81/0x140
 ? page_pool_unlink_napi+0x1f/0x30
 ? report_bug+0x102/0x200
 ? handle_bug+0x44/0x70
 ? exc_invalid_op+0x13/0x60
 ? asm_exc_invalid_op+0x16/0x20
 ? bnxt_free_ring.isra.123+0xb1/0xd0 [bnxt_en]
 ? page_pool_unlink_napi+0x1f/0x30
 page_pool_destroy+0x3e/0x150
 bnxt_free_mem+0x441/0x5e0 [bnxt_en]
 bnxt_half_close_nic+0x2a/0x40 [bnxt_en]
 bnxt_self_test+0x21d/0x450 [bnxt_en]
 __dev_ethtool+0xeda/0x2e30
 ? native_queued_spin_lock_slowpath+0x17f/0x2b0
 ? __link_object+0xa1/0x160
 ? _raw_spin_unlock_irqrestore+0x23/0x40
 ? __create_object+0x5f/0x90
 ? __kmem_cache_alloc_node+0x317/0x3c0
 ? dev_ethtool+0x59/0x170
 dev_ethtool+0xa7/0x170
 dev_ioctl+0xc3/0x530
 sock_do_ioctl+0xa8/0xf0
 sock_ioctl+0x270/0x310
 __x64_sys_ioctl+0x8c/0xc0
 do_syscall_64+0x3e/0xf0
 entry_SYSCALL_64_after_hwframe+0x6e/0x76

Fixes: 294e39e0 ("bnxt: hook NAPIs to page pools")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-5-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The existing formula used in the driver to calculate the number of RSS
table entries is to round up the number of RX rings to the next integer
multiples of 64 (e.g. 64, 128, 192, ..).  This is incorrect.  The valid
values supported by the chip are 64, 128, 256, 512 only (power of 2
starting from 64).  When the number of RX rings is greater than 128, the
entry size will likely be wrong.  Firmware will round down the invalid
value (e.g. 192 rounded down to 128) provided by the driver, causing some
RSS rings to not receive any packets.

We already have an existing function bnxt_calc_nr_ring_pages() to
do this calculation.  Use it in bnxt_get_nr_rss_ctxs() to calculate the
number of RSS contexts correctly for P5_PLUS chips.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Fixes: 7b3af4f7 ("bnxt_en: Add RSS support for 57500 chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-4-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_hwrm_get_rings() can abort and return error when there are not
enough ring resources.  It aborts without releasing the HWRM DMA buffer,
causing a dma_pool_destroy warning when the driver is unloaded:

bnxt_en 0000:99:00.0: dma_pool_destroy bnxt_hwrm, 000000005b089ba8 busy

Fixes: f1e50b27 ("bnxt_en: Fix trimming of P5 RX and TX rings")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-3-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The first message to firmware may fail if the device is undergoing FLR.
The driver has some recovery logic for this failure scenario but we must
wait 100 msec for FLR to complete before proceeding.  Otherwise the
recovery will always fail.

Fixes: ba02629f ("bnxt_en: log firmware status on firmware init failure")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-2-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When I run syz's reproduction C program locally, it causes the following
issue:
pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0!
WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508)
Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7
30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900
RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff
R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000
R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000
FS:  00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0
Call Trace:
<IRQ>
  _raw_spin_unlock (kernel/locking/spinlock.c:186)
  inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321)
  inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358)
  tcp_check_req (net/ipv4/tcp_minisocks.c:868)
  tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260)
  ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205)
  ip_local_deliver_finish (net/ipv4/ip_input.c:234)
  __netif_receive_skb_one_core (net/core/dev.c:5529)
  process_backlog (./include/linux/rcupdate.h:779)
  __napi_poll (net/core/dev.c:6533)
  net_rx_action (net/core/dev.c:6604)
  __do_softirq (./arch/x86/include/asm/jump_label.h:27)
  do_softirq (kernel/softirq.c:454 kernel/softirq.c:441)
</IRQ>
<TASK>
  __local_bh_enable_ip (kernel/softirq.c:381)
  __dev_queue_xmit (net/core/dev.c:4374)
  ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235)
  __ip_queue_xmit (net/ipv4/ip_output.c:535)
  __tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
  tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469)
  tcp_rcv_state_process (net/ipv4/tcp_input.c:6657)
  tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929)
  __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968)
  release_sock (net/core/sock.c:3536)
  inet_wait_for_connect (net/ipv4/af_inet.c:609)
  __inet_stream_connect (net/ipv4/af_inet.c:702)
  inet_stream_connect (net/ipv4/af_inet.c:748)
  __sys_connect (./include/linux/file.h:45 net/socket.c:2064)
  __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070)
  do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
  RIP: 0033:0x7fa10ff05a3d
  Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89
  c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48
  RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
  RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d
  RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003
  RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640
  R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20
</TASK>

The issue triggering process is analyzed as follows:
Thread A                                       Thread B
tcp_v4_rcv	//receive ack TCP packet       inet_shutdown
  tcp_check_req                                  tcp_disconnect //disconnect sock
  ...                                              tcp_set_state(sk, TCP_CLOSE)
    inet_csk_complete_hashdance                ...
      inet_csk_reqsk_queue_add                 inet_listen  //start listen
        spin_lock(&queue->rskq_lock)             inet_csk_listen_start
        ...                                        reqsk_queue_alloc
        ...                                          spin_lock_init
        spin_unlock(&queue->rskq_lock)	//warning

When the socket receives the ACK packet during the three-way handshake,
it will hold spinlock. And then the user actively shutdowns the socket
and listens to the socket immediately, the spinlock will be initialized.
When the socket is going to release the spinlock, a warning is generated.
Also the same issue to fastopenq.lock.

Move init spinlock to inet_create and inet_accept to make sure init the
accept_queue's spinlocks once.

Fixes: fff1f300 ("tcp: add a spinlock to protect struct request_sock_queue")
Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path")
Reported-by: Ming Shu <sming56@aliyun.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240118012019.1751966-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:

make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
	[...]
	# timeout set to 120
	# selftests: drivers/net/bonding: bond_options.sh
	# TEST: prio (active-backup miimon primary_reselect 0)                [ OK ]
	# TEST: prio (active-backup miimon primary_reselect 1)                [ OK ]
	# TEST: prio (active-backup miimon primary_reselect 2)                [ OK ]
	# TEST: prio (active-backup arp_ip_target primary_reselect 0)         [ OK ]
	# TEST: prio (active-backup arp_ip_target primary_reselect 1)         [ OK ]
	# TEST: prio (active-backup arp_ip_target primary_reselect 2)         [ OK ]
	#
	not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds

This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.

I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.

Fixes: 42a8d4aa ("selftests: bonding: add bonding prio option test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#tSuggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A crash was found when dumping SMC-D connections. It can be reproduced
by following steps:

- run nginx/wrk test:
  smc_run nginx
  smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL>

- continuously dump SMC-D connections in parallel:
  watch -n 1 'smcss -D'

 BUG: kernel NULL pointer dereference, address: 0000000000000030
 CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G	E      6.7.0+ #55
 RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
 Call Trace:
  <TASK>
  ? __die+0x24/0x70
  ? page_fault_oops+0x66/0x150
  ? exc_page_fault+0x69/0x140
  ? asm_exc_page_fault+0x26/0x30
  ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
  ? __kmalloc_node_track_caller+0x35d/0x430
  ? __alloc_skb+0x77/0x170
  smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
  smc_diag_dump+0x26/0x60 [smc_diag]
  netlink_dump+0x19f/0x320
  __netlink_dump_start+0x1dc/0x300
  smc_diag_handler_dump+0x6a/0x80 [smc_diag]
  ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
  sock_diag_rcv_msg+0x121/0x140
  ? __pfx_sock_diag_rcv_msg+0x10/0x10
  netlink_rcv_skb+0x5a/0x110
  sock_diag_rcv+0x28/0x40
  netlink_unicast+0x22a/0x330
  netlink_sendmsg+0x1f8/0x420
  __sock_sendmsg+0xb0/0xc0
  ____sys_sendmsg+0x24e/0x300
  ? copy_msghdr_from_user+0x62/0x80
  ___sys_sendmsg+0x7c/0xd0
  ? __do_fault+0x34/0x160
  ? do_read_fault+0x5f/0x100
  ? do_fault+0xb0/0x110
  ? __handle_mm_fault+0x2b0/0x6c0
  __sys_sendmsg+0x4d/0x80
  do_syscall_64+0x69/0x180
  entry_SYSCALL_64_after_hwframe+0x6e/0x76

It is possible that the connection is in process of being established
when we dump it. Assumed that the connection has been registered in a
link group by smc_conn_create() but the rmb_desc has not yet been
initialized by smc_buf_create(), thus causing the illegal access to
conn->rmb_desc. So fix it by checking before dump.

Fixes: 4b1b7d3b ("net/smc: add SMC-D diag support")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and netfilter.

  Previous releases - regressions:

   - Revert "net: rtnetlink: Enslave device before bringing it up",
     breaks the case inverse to the one it was trying to fix

   - net: dsa: fix oob access in DSA's netdevice event handler
     dereference netdev_priv() before check its a DSA port

   - sched: track device in tcf_block_get/put_ext() only for clsact
     binder types

   - net: tls, fix WARNING in __sk_msg_free when record becomes full
     during splice and MORE hint set

   - sfp-bus: fix SFP mode detect from bitrate

   - drv: stmmac: prevent DSA tags from breaking COE

  Previous releases - always broken:

   - bpf: fix no forward progress in in bpf_iter_udp if output buffer is
     too small

   - bpf: reject variable offset alu on registers with a type of
     PTR_TO_FLOW_KEYS to prevent oob access

   - netfilter: tighten input validation

   - net: add more sanity check in virtio_net_hdr_to_skb()

   - rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
     infinite loop

   - amt: do not use the portion of skb->cb area which may get clobbered

   - mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option

  Misc:

   - spring cleanup of inactive maintainers"

* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
  i40e: Include types.h to some headers
  ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
  selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
  selftests: mlxsw: qos_pfc: Remove wrong description
  mlxsw: spectrum_router: Register netdevice notifier before nexthop
  mlxsw: spectrum_acl_tcam: Fix stack corruption
  mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
  mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
  ethtool: netlink: Add missing ethnl_ops_begin/complete
  selftests: bonding: Add more missing config options
  selftests: netdevsim: add a config file
  libbpf: warn on unexpected __arg_ctx type when rewriting BTF
  selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
  bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
  bpf: extract bpf_ctx_convert_map logic and make it more reusable
  libbpf: feature-detect arg:ctx tag support in kernel
  ipvs: avoid stat macros calls from preemptible context
  netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
  netfilter: nf_tables: skip dead set elements in netlink dump
  netfilter: nf_tables: do not allow mismatch field size and set key length
  ...

Pull i2c updates from Wolfram Sang:
 "This removes the currently unused CLASS_DDC support (controllers set
  the flag, but there is no client to use it).

  Also, CLASS_SPD support gets simplified to prepare removal in the
  future. Class based instantiation is not recommended these days
  anyhow.

  Furthermore, I2C core now creates a debugfs directory per I2C adapter.
  Current bus driver users were converted to use it.

  Finally, quite some driver updates. Standing out are patches for the
  wmt-driver which is refactored to support more variants.

  This is the rebased pull request where a large series for the
  designware driver was dropped"

* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  MAINTAINERS: use proper email for my I2C work
  i2c: stm32f7: add support for stm32mp25 soc
  i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
  dt-bindings: i2c: document st,stm32mp25-i2c compatible
  i2c: stm32f7: simplify status messages in case of errors
  i2c: stm32f7: perform most of irq job in threaded handler
  i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
  i2c: i801: Add lis3lv02d for Dell XPS 15 7590
  i2c: i801: Add lis3lv02d for Dell Precision 3540
  i2c: wmt: Reduce redundant: REG_CR setting
  i2c: wmt: Reduce redundant: function parameter
  i2c: wmt: Reduce redundant: clock mode setting
  i2c: wmt: Reduce redundant: wait event complete
  i2c: wmt: Reduce redundant: bus busy check
  i2c: mux: reg: Remove class-based device auto-detection support
  i2c: make i2c_bus_type const
  dt-bindings: at24: add ROHM BR24G04
  eeprom: at24: use of_match_ptr()
  i2c: cpm: Remove linux,i2c-index conversion from be32
  i2c: imx: Make SDA actually optional for bus recovering
  ...

Pull RTC updates from Alexandre Belloni:
 "There are three new drivers this cycle. Also the cmos driver is
  getting fixes for longstanding wakeup issues on AMD.

  New drivers:
   - Analog Devices MAX31335
   - Nuvoton ma35d1
   - Texas Instrument TPS6594 PMIC RTC

  Drivers:
   - cmos: use ACPI alarm instead of HPET on recent AMD platforms
   - nuvoton: add NCT3015Y-R and NCT3018Y-R support
   - rv8803: proper suspend/resume and wakeup-source support"

* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
  rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
  rtc: da9063: Use dev_err_probe()
  rtc: da9063: Use device_get_match_data()
  rtc: da9063: Make IRQ as optional
  rtc: max31335: Fix comparison in max31335_volatile_reg()
  rtc: max31335: use regmap_update_bits_check
  rtc: max31335: remove unecessary locking
  rtc: max31335: add driver support
  dt-bindings: rtc: max31335: add max31335 bindings
  rtc: rv8803: add wakeup-source support
  rtc: ac100: remove misuses of kernel-doc
  rtc: class: Remove usage of the deprecated ida_simple_xx() API
  rtc: MAINTAINERS: drop Alessandro Zummo
  rtc: ma35d1: remove hardcoded UIE support
  dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
  rtc: rv8803: Add power management support
  rtc: ds3232: avoid unused-const-variable warning
  rtc: lpc24xx: add missing dependency
  rtc: tps6594: Add driver for TPS6594 RTC
  rtc: Add driver for Nuvoton ma35d1 rtc controller
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for Adafruit Seesaw gamepad device

 - Zforce touchscreen will handle standard device properties for axis
   swap/inversion

 - handling of advanced sensitivity settings in Microchip CAP11xx
   capacitive sensor driver

 - more drivers have been converted to use newer gpiod API

 - support for dedicated wakeup IRQs in gpio-keys dirver

 - support for slider gestures and OTP variants in iqs269a driver

 - atkbd will report keyboard version as 0xab83 in cases when GET ID
   command was skipped (to deal with problematic firmware on newer
   laptops), restoring the previous behavior

 - other assorted cleanups and changes

* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: atkbd - use ab83 as id when skipping the getid command
  Input: driver for Adafruit Seesaw Gamepad
  dt-bindings: input: bindings for Adafruit Seesaw Gamepad
  Input: da9063_onkey - avoid explicitly setting input's parent
  Input: da9063_onkey - avoid using OF-specific APIs
  Input: iqs269a - add support for OTP variants
  dt-bindings: input: iqs269a: Add bindings for OTP variants
  Input: iqs269a - add support for slider gestures
  dt-bindings: input: iqs269a: Add bindings for slider gestures
  Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
  Input: zforce_ts - accept standard touchscreen properties
  dt-bindings: touchscreen: neonode,zforce: Use standard properties
  dt-bindings: touchscreen: convert neonode,zforce to json-schema
  dt-bindings: input: convert drv266x to json-schema
  Input: da9063 - use dev_err_probe()
  Input: da9063 - drop redundant prints in probe()
  Input: da9063 - simplify obtaining OF match data
  Input: as5011 - convert to GPIO descriptor
  Input: omap-keypad - drop optional GPIO support
  Input: tca6416-keypad - drop unused include
  ...

Pull phy updates from Vinod Koul:
 "New Support:

   - Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75
     USB3, X1E80100 USB3 support

   - Mediatek MT8195 support

   - Rockchip RK3128 usb2 support

   - TI SGMII mode for J784S4

  Updates:

   - Qualcomm v7 register offsets updates

   - Mediatek tphy support for force phy mode switch"

* tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits)
  phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4
  phy: ti: gmii-sel: Enable SGMII mode for J784S4
  phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
  phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible
  dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible
  phy: mediatek: tphy: add support force phy mode switch
  dt-bindings: phy: mediatek: tphy: add a property for force-mode switch
  phy: phy-can-transceiver: insert space after include
  phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header
  phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY
  phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
  phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets
  phy: qcom-qmp: qserdes-com: Add v7 register offsets
  phy: qcom-qmp: pcs-usb: Add v7 register offsets
  phy: qcom-qmp: pcs: Add v7 register offsets
  phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets
  phy: qcom-qmp: qserdes-com: Add some more v6 register offsets
  ...

Pull soundwire updates from Vinod Koul:

 - Core: add concept of controller_id to deal with clear Controller /
   Manager hierarchy

 - bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
   qcom_swrm_stream_alloc_ports() and setting controller id to hw master
   id

* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
  soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
  soundwire: qcom: set controller id to hw master id
  soundwire: fix initializing sysfs for same devices on different buses
  soundwire: bus: introduce controller_id
  soundwire: stream: constify sdw_port_config when adding devices
  soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
  soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup

Pull gpio fixes from Bartosz Golaszewski:
 "Apart from some regular driver fixes there's a relatively big revert
  of the locking changes that were introduced to GPIOLIB in this merge
  window.

  This is because it turned out that some legacy GPIO interfaces - that
  need to translate a number from the global GPIO numberspace to the
  address of the relevant descriptor, thus running a GPIO device lookup
  and taking the GPIO device list lock - are still used in old code from
  atomic context resulting in "scheduling while atomic" errors.

  I'll try to make the read-only part of the list access entirely
  lockless using SRCU but this will take some time so let's go back to
  the old global spinlock for now.

  Summary:

   - revert the changes aiming to use a read-write semaphore to protect
     the list of GPIO devices due to calls to legacy API taking that
     lock from atomic context in old code

   - fix inverted logic in DEFINE_FREE() for GPIO device references

   - check the return value of bgpio_init() in gpio-mlxbf3

   - fix node address in the DT bindings example for gpio-xilinx

   - fix signedness bug in gpio-rtd

   - fix kernel-doc warnings in gpio-en7523"

* tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: revert the attempt to protect the GPIO device list with an rwsem
  gpio: EN7523: fix kernel-doc warnings
  gpiolib: Fix scope-based gpio_device refcounting
  gpio: mlxbf3: add an error code check in mlxbf3_gpio_probe
  dt-bindings: gpio: xilinx: Fix node address in gpio
  gpio: rtd: Fix signedness bug in probe

Pull pwm fixes from Uwe Kleine-König:

 - fix a duplicate cleanup in an error path introduced in
   this merge window

 - fix an out-of-bounds access

   In practise it doesn't happen - otherwise someone would have noticed
   since v5.17-rc1 I guess - because the device tree binding for the two
   drivers using of_pwm_single_xlate() only have args->args_count == 1.

   A device-tree that doesn't conform to the respective bindings could
   trigger that easily however.

 - correct the request callback of the jz4740 pwm driver which used
   dev_err_probe() long after .probe() completed.

   This is conceptually wrong because dev_err_probe() might call
   device_set_deferred_probe_reason() which is nonsensical after the
   driver is bound.

* tag 'pwm/for-6.8-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ukleinek/linux:
  pwm: jz4740: Don't use dev_err_probe() in .request()
  pwm: Fix out-of-bounds access in of_pwm_single_xlate()
  pwm: bcm2835: Remove duplicate call to clk_rate_exclusive_put()

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for Monolithic Power Systems MP3309C WLED Step-up Converter

  Fix-ups:
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree Binding updates
   - Demote non-kerneldoc header comments
   - Improve error handling; return proper error values, simplify, avoid
     duplicates, etc
   - Convert over to the new (kinda) GPIOD API

  Bug Fixes:
   - Fix uninitialised local variable"

* tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: hx8357: Convert to agnostic GPIO API
  backlight: ili922x: Add an error code check in ili922x_write()
  backlight: ili922x: Drop kernel-doc for local macros
  backlight: mp3309c: Fix uninitialized local variable
  backlight: pwm_bl: Use dev_err_probe
  backlight: mp3309c: Add support for MPS MP3309C
  dt-bindings: backlight: mp3309c: Remove two required properties

Pull dma-mapping fixes from Christoph Hellwig:

 - fix kerneldoc warnings (Randy Dunlap)

 - better bounds checking in swiotlb (ZhangPeng)

* tag 'dma-mapping-6.8-2024-01-18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: fix kernel-doc warnings
  swiotlb: check alloc_size before the allocation of a new memory pool

Pull memblock update from Mike Rapoport:
 "Code readability improvement.

  Use NUMA_NO_NODE instead of -1 as return value of
  memblock_search_pfn_nid() to improve code readability
  and consistency with the callers of that function"

* tag 'memblock-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Return NUMA_NO_NODE instead of -1 to improve code readability

Pull virtio updates from Michael Tsirkin:

 - vdpa/mlx5: support for resumable vqs

 - virtio_scsi: mq_poll support

 - 3virtio_pmem: support SHMEM_REGION

 - virtio_balloon: stay awake while adjusting balloon

 - virtio: support for no-reset virtio PCI PM

 - Fixes, cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Add mkey leak detection
  vdpa/mlx5: Introduce reference counting to mrs
  vdpa/mlx5: Use vq suspend/resume during .set_map
  vdpa/mlx5: Mark vq state for modification in hw vq
  vdpa/mlx5: Mark vq addrs for modification in hw vq
  vdpa/mlx5: Introduce per vq and device resume
  vdpa/mlx5: Allow modifying multiple vq fields in one modify command
  vdpa/mlx5: Expose resumable vq capability
  vdpa: Block vq property changes in DRIVER_OK
  vdpa: Track device suspended state
  scsi: virtio_scsi: Add mq_poll support
  virtio_pmem: support feature SHMEM_REGION
  virtio_balloon: stay awake while adjusting balloon
  vdpa: Remove usage of the deprecated ida_simple_xx() API
  virtio: Add support for no-reset virtio PCI PM
  virtio_net: fix missing dma unmap for resize
  vhost-vdpa: account iommu allocations
  vdpa: Fix an error handling path in eni_vdpa_probe()

Pull hwmonfix from Guenter Roeck:
 "Fix crash seen when instantiating npcm750-pwm-fan"

* tag 'hwmon-for-v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (npcm750-pwm-fan) Fix crash observed when instantiating nuvoton,npcm750-pwm-fan

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The bulk of this update is support for enumerating the performance
  capabilities of CXL memory targets and connecting that to a platform
  CXL memory QoS class. Some follow-on work remains to hook up this data
  into core-mm policy, but that is saved for v6.9.

  The next significant update is unifying how CXL event records (things
  like background scrub errors) are processed between so called
  "firmware first" and native error record retrieval. The CXL driver
  handler that processes the record retrieved from the device mailbox is
  now the handler for that same record format coming from an EFI/ACPI
  notification source.

  This also contains miscellaneous feature updates, like Get Timestamp,
  and other fixups.

  Summary:

   - Add support for parsing the Coherent Device Attribute Table (CDAT)

   - Add support for calculating a platform CXL QoS class from CDAT data

   - Unify the tracing of EFI CXL Events with native CXL Events.

   - Add Get Timestamp support

   - Miscellaneous cleanups and fixups"

* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
  cxl/core: use sysfs_emit() for attr's _show()
  cxl/pci: Register for and process CPER events
  PCI: Introduce cleanup helpers for device reference counts and locks
  acpi/ghes: Process CXL Component Events
  cxl/events: Create a CXL event union
  cxl/events: Separate UUID from event structures
  cxl/events: Remove passing a UUID to known event traces
  cxl/events: Create common event UUID defines
  cxl/events: Promote CXL event structures to a core header
  cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
  cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
  cxl: Fix device reference leak in cxl_port_perf_data_calculate()
  cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
  cxl: Introduce put_cxl_root() helper
  cxl/port: Fix missing target list lock
  cxl/port: Fix decoder initialization when nr_targets > interleave_ways
  cxl/region: fix x9 interleave typo
  cxl/trace: Pass UUID explicitly to event traces
  cxl/region: use %pap format to print resource_size_t
  cxl/region: Add dev_dbg() detail on failure to allocate HPA space
  ...

Pull VFIO updates from Alex Williamson:

 - Add debugfs support, initially used for reporting device migration
   state (Longfang Liu)

 - Fixes and support for migration dirty tracking across multiple IOVA
   regions in the pds-vfio-pci driver (Brett Creeley)

 - Improved IOMMU allocation accounting visibility (Pasha Tatashin)

 - Virtio infrastructure and a new virtio-vfio-pci variant driver, which
   provides emulation of a legacy virtio interfaces on modern virtio
   hardware for virtio-net VF devices where the PF driver exposes
   support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
   VF to provide driver ABI compatibility to legacy devices (Yishai
   Hadas & Feng Liu)

 - Migration fixes for the hisi-acc-vfio-pci variant driver (Shameer
   Kolothum)

 - Kconfig dependency fix for new virtio-vfio-pci variant driver (Arnd
   Bergmann)

* tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio: (22 commits)
  vfio/virtio: fix virtio-pci dependency
  hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume
  vfio/virtio: Declare virtiovf_pci_aer_reset_done() static
  vfio/virtio: Introduce a vfio driver over virtio devices
  vfio/pci: Expose vfio_pci_core_iowrite/read##size()
  vfio/pci: Expose vfio_pci_core_setup_barmap()
  virtio-pci: Introduce APIs to execute legacy IO admin commands
  virtio-pci: Initialize the supported admin commands
  virtio-pci: Introduce admin commands
  virtio-pci: Introduce admin command sending function
  virtio-pci: Introduce admin virtqueue
  virtio: Define feature bit for administration virtqueue
  vfio/type1: account iommu allocations
  vfio/pds: Add multi-region support
  vfio/pds: Move seq/ack bitmaps into region struct
  vfio/pds: Pass region info to relevant functions
  vfio/pds: Move and rename region specific info
  vfio/pds: Only use a single SGL for both seq and ack
  vfio/pds: Fix calculations in pds_vfio_dirty_sync
  MAINTAINERS: Add vfio debugfs interface doc link
  ...

Pull iommufd updates from Jason Gunthorpe:
 "This brings the first of three planned user IO page table invalidation
  operations:

   - IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
     the iommu itself. The Intel implementation will also generate an
     ATC invalidation to flush the device IOTLB as it unambiguously
     knows the device, but other HW will not.

  It goes along with the prior PR to implement userspace IO page tables
  (aka nested translation for VMs) to allow Intel to have full
  functionality for simple cases. An Intel implementation of the
  operation is provided.

  Also fix a small bug in the selftest mock iommu driver probe"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd/selftest: Check the bus type during probe
  iommu/vt-d: Add iotlb flush for nested domain
  iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
  iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
  iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
  iommufd/selftest: Add mock_domain_cache_invalidate_user support
  iommu: Add iommu_copy_struct_from_user_array helper
  iommufd: Add IOMMU_HWPT_INVALIDATE
  iommu: Add cache_invalidate_user op

Pull iommu updates from Joerg Roedel:
 "Core changes:
   - Fix race conditions in device probe path
   - Retire IOMMU bus_ops
   - Support for passing custom allocators to page table drivers
   - Clean up Kconfig around IOMMU_SVA
   - Support for sharing SVA domains with all devices bound to a mm
   - Firmware data parsing cleanup
   - Tracing improvements for iommu-dma code
   - Some smaller fixes and cleanups

  ARM-SMMU drivers:
   - Device-tree binding updates:
      - Add additional compatible strings for Qualcomm SoCs
      - Document Adreno clocks for Qualcomm's SM8350 SoC
   - SMMUv2:
      - Implement support for the ->domain_alloc_paging() callback
      - Ensure Secure context is restored following suspend of Qualcomm
        SMMU implementation
   - SMMUv3:
      - Disable stalling mode for the "quiet" context descriptor
      - Minor refactoring and driver cleanups

  Intel VT-d driver:
   - Cleanup and refactoring

  AMD IOMMU driver:
   - Improve IO TLB invalidation logic
   - Small cleanups and improvements

  Rockchip IOMMU driver:
   - DT binding update to add Rockchip RK3588

  Apple DART driver:
   - Apple M1 USB4/Thunderbolt DART support
   - Cleanups

  Virtio IOMMU driver:
   - Add support for iotlb_sync_map
   - Enable deferred IO TLB flushes"

* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
  iommu: Don't reserve 0-length IOVA region
  iommu/vt-d: Move inline helpers to header files
  iommu/vt-d: Remove unused vcmd interfaces
  iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
  iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
  iommu/sva: Fix memory leak in iommu_sva_bind_device()
  dt-bindings: iommu: rockchip: Add Rockchip RK3588
  iommu/dma: Trace bounce buffer usage when mapping buffers
  iommu/arm-smmu: Convert to domain_alloc_paging()
  iommu/arm-smmu: Pass arm_smmu_domain to internal functions
  iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
  iommu/arm-smmu: Convert to a global static identity domain
  iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
  iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
  iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
  iommu/arm-smmu-v3: Add a type for the STE
  iommu/arm-smmu-v3: disable stall for quiet_cd
  iommu/qcom: restore IOMMU state if needed
  iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
  iommu/arm-smmu-qcom: Add missing GMU entry to match table
  ...

Pull percpu updates from Dennis Zhou:
 "Enable percpu page allocator for RISC-V.

  There are RISC-V configurations with sparse NUMA configurations and
  small vmalloc space causing dynamic percpu allocations to fail as the
  backing chunk stride is too far apart"

* tag 'percpu-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  riscv: Enable pcpu page first chunk allocator
  mm: Introduce flush_cache_vmap_early()

Pull eventfs updates from Steven Rostedt:

 - Remove "lookup" parameter of create_dir_dentry() and
   create_file_dentry(). These functions were called by lookup and the
   readdir logic, where readdir needed it to up the ref count of the
   dentry but the lookup did not. A "lookup" parameter was passed in to
   tell it what to do, but this complicated the code. It is better to
   just always up the ref count and require the caller to decrement it,
   even for lookup.

 - Modify the .iterate_shared callback to not use the dcache_readdir()
   logic and just handle what gets displayed by that one function. This
   removes the need for eventfs to hijack the file->private_data from
   the dcache_readdir() "cursor" pointer, and makes the code a bit more
   sane

 - Use the root and instance inodes for default ownership. Instead of
   walking the dentry tree and updating each dentry gid, use the
   getattr(), setattr() and permission() callbacks to set the ownership
   and permissions using the root or instance as the default

 - Some other optimizations with the eventfs iterate_shared logic

 - Hard-code the inodes for eventfs to the same number for files, and
   the same number for directories

 - Have getdent() not create dentries/inodes in iterate_shared() as now
   it has hard-coded inode numbers

 - Use kcalloc() instead of kzalloc() on a list of elements

 - Fix seq_buf warning and make static work properly.

* tag 'eventfs-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  seq_buf: Make DECLARE_SEQ_BUF() usable
  eventfs: Use kcalloc() instead of kzalloc()
  eventfs: Do not create dentries nor inodes in iterate_shared
  eventfs: Have the inodes all for files and directories all be the same
  eventfs: Shortcut eventfs_iterate() by skipping entries already read
  eventfs: Read ei->entries before ei->children in eventfs_iterate()
  eventfs: Do ctx->pos update for all iterations in eventfs_iterate()
  eventfs: Have eventfs_iterate() stop immediately if ei->is_freed is set
  tracefs/eventfs: Use root and instance inodes as default ownership
  eventfs: Stop using dcache_readdir() for getdents()
  eventfs: Remove "lookup" parameter from create_dir/file_dentry()

Pull tracing updates from Steven Rostedt:

 - Allow kernel trace instance creation to specify what events are
   created

   Inside the kernel, a subsystem may create a tracing instance that it
   can use to send events to user space. This sub-system may not care
   about the thousands of events that exist in eventfs. Allow the
   sub-system to specify what sub-systems of events it cares about, and
   only those events are exposed to this instance.

 - Allow the ring buffer to be broken up into bigger sub-buffers than
   just the architecture page size.

   A new tracefs file called "buffer_subbuf_size_kb" is created. The
   user can now specify a minimum size the sub-buffer may be in
   kilobytes. Note, that the implementation currently make the
   sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
   only writes in kilobyte size, and the sub-buffer will be updated to
   the next size that it will can accommodate it. If the user writes in
   10, it will change the size to be 4 pages on x86 (16K), as that is
   the next available size that can hold 10K pages.

 - Update the debug output when a corrupt time is detected in the ring
   buffer. If the ring buffer detects inconsistent timestamps, there's a
   debug config options that will dump the contents of the meta data of
   the sub-buffer that is used for debugging. Add some more information
   to this dump that helps with debugging.

 - Add more timestamp debugging checks (only triggers when the config is
   enabled)

 - Increase the trace_seq iterator to 2 page sizes.

 - Allow strings written into tracefs_marker to be larger. Up to just
   under 2 page sizes (based on what trace_seq can hold).

 - Increase the trace_maker_raw write to be as big as a sub-buffer can
   hold.

 - Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
   been removed.

 - More selftests were added.

 - Some code clean ups as well.

* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
  ring-buffer: Remove stale comment from ring_buffer_size()
  tracing histograms: Simplify parse_actions() function
  tracing/selftests: Remove exec permissions from trace_marker.tc test
  ring-buffer: Use subbuf_order for buffer page masking
  tracing: Update subbuffer with kilobytes not page order
  ringbuffer/selftest: Add basic selftest to test changing subbuf order
  ring-buffer: Add documentation on the buffer_subbuf_order file
  ring-buffer: Just update the subbuffers when changing their allocation order
  ring-buffer: Keep the same size when updating the order
  tracing: Stop the tracing while changing the ring buffer subbuf size
  tracing: Update snapshot order along with main buffer order
  ring-buffer: Make sure the spare sub buffer used for reads has same size
  ring-buffer: Do no swap cpu buffers if order is different
  ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
  ring-buffer: Read and write to ring buffers with custom sub buffer size
  ring-buffer: Set new size of the ring buffer sub page
  ring-buffer: Add interface for configuring trace sub buffer size
  ring-buffer: Page size per ring buffer
  ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
  ring-buffer: Check if absolute timestamp goes backwards
  ...