- 03 Sep, 2004 40 commits
-
-
Jan Harkes authored
Trivial fix to make the CODA_FS_OLD_API config option actually work as expected. Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Maximilian Attems authored
Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
-
Maximilian Attems authored
Uses msecs_to_jiffies() instead of the custom jiffies_from_ms(). Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Maximilian Attems authored
Replace set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(some_time); with msleep(jiffies_to_msecs(some_time)); Signed-off-by:
-
Maximilian Attems authored
Uses msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by:
-
Maximilian Attems authored
Uses msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by:
-
Maximilian Attems authored
Uses msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by:
-
Maximilian Attems authored
Use msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by:
-
Maximilian Attems authored
Uses msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Maximilian Attems authored
Signed-off-by:
-
Bjorn Helgaas authored
Acked by Jesse. sn_console: don't print anything unless we're actually on an SGI box. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Bjorn Helgaas authored
I think the HPET driver should announce the hardware it claims. Here's a patch that prints this: hpet0: at MMIO 0xc0000ffffc002000, IRQs 74, 75, 76 hpet0: 4ns tick, 3 64-bit timers hpet1: at MMIO 0xc0000ffffc082000, IRQs 77, 78, 79 hpet1: 4ns tick, 3 64-bit timers This has been acked by Bob. I haven't heard from Venkatesh. Print basic information (MMIO address, IRQs used, tick rate, number of timers) when claiming an HPET device. Signed-off-by:
-
Luiz Capitulino authored
drivers/net/cs89x0.c: In function `net_close': drivers/net/cs89x0.c:1601: warning: unused variable `lp' 'lp'is only used when ALLOW_DMA is defined. Signed-off-by:
Luiz Capitulino <lcapitulino@conectiva.com.br> Signed-off-by:
-
Christoph Hellwig authored
riva_get_EDID_i2c is only used on !CONFIG_PPC_OF, so don't compile it on ppc either. Signed-off-by:
-
Christoph Hellwig authored
It's defined in slab.c but not used anywhere. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
->clear_inode is the right place to free private inode parts. No idea what I though when using ->put_inode and i_count check. Signed-off-by:
-
Christoph Hellwig authored
There's some scoping problems so we get unused variables for that config. Signed-off-by:
-
Christoph Hellwig authored
dump_HT_speeds is only used by #if 0'ed code so if 0 it as well. Signed-off-by:
-
William Lee Irwin III authored
bad_page() only prints out 8 hexadecimal digits of page->flags regardless of sizeof(page_flags_t). This leads to confusing and/or incomplete bug reports. The following patch uses a field width argument to replace the hardcoded %08lx so that bad_page() may print the whole of page->flags. Signed-off-by:
-
Luca Risolia authored
Since in-kernel colorspace conversion is not allowed, this patch disables it in the CPiA video camera driver by default. Users should fix the applications in case they don't work without conversion reenabled by setting the new 'colorspace_conv' module parameter to 1. This is a temporary solution, so within a few months deprecated code will be entirely removed. Signed-off-by:
Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by:
-
Alan Cox authored
This fixes the logic so we always check for the cache. It also defaults to safer behaviour for the non cache flush case now we have the right bits in the right places. I've also played a bit with timings - the worst case timings I can get for the flush are about 7 seconds (which I'd expect as the engineering worst cases will include retries) Probably what should happen is that the barrier logic is enabled providing the wcache is disabled. I've not meddled with this as I don't know what the intended semantics and rules are for disabling barrier on a live disk (eg when a user uses hdparm to turn on the write cache). In the current code as with Jens original that cannot occur. I've also fixed the new printk's as per a private request from Matt Domsch. Cc: Jens Axboe <axboe@suse.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Alan Cox authored
This was on my TODO list for a while and it turns out someone already fixed the armwaving overcommit mode for the same problem. It is easy to get into a situation where you have no overcommit and nothing can be done because there is no memory to clean up the stable but non-useful state of the machine. The fix is trivial and duplicated from the armwaving overcommit code path. The last 3% of the memory can be claimed by root processes only. It isn't a cure but it does seem to solve the real world problems - at least providing you have enough memory for 3% to be useful 8). Signed-off-by:
-
Adrian Bunk authored
CC drivers/char/pcxx.o drivers/char/pcxx.c: In function `pcxe_cleanup': drivers/char/pcxx.c:209: warning: unused variable `e2' drivers/char/pcxx.c: At top level: drivers/char/pcxx.c:229: `pcxe_init' undeclared here (not in a function) drivers/char/pcxx.c:230: warning: type defaults to `int' in declaration of `module_cleanup' drivers/char/pcxx.c:230: warning: parameter names (without types) in function declaration drivers/char/pcxx.c:230: warning: data definition has no type or storage class drivers/char/pcxx.c:1016: redefinition of `__initcall_pcxe_init' drivers/char/pcxx.c:229: `__initcall_pcxe_init' previously defined here drivers/char/pcxx.c:1016: `pcxe_init' undeclared here (not in a function) drivers/char/pcxx.c:1017: `pcxe_exit' undeclared here (not in a function) drivers/char/pcxx.c: In function `pcxe_tiocmget': drivers/char/pcxx.c:2009: `mstat' undeclared (first use in this function) drivers/char/pcxx.c:2009: (Each undeclared identifier is reported only once drivers/char/pcxx.c:2009: for each function it appears in.) drivers/char/pcxx.c: In function `pcxe_tiocmset': drivers/char/pcxx.c:2072: warning: control reaches end of non-void function drivers/char/pcxx.c: At top level: drivers/char/pcxx.c:1044: warning: `pcxe_init' defined but not used Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
-
