Commit 46c043ed ("mm: take i_mmap_lock in unmap_mapping_range() for
DAX") moved some code in __dax_pmd_fault() that was responsible for
zeroing newly allocated PMD pages.  The new location didn't properly set
up 'kaddr', so when run this code resulted in a NULL pointer BUG.

Fix this by getting the correct 'kaddr' via bdev_direct_access().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SunDong reported the following on

  https://bugzilla.kernel.org/show_bug.cgi?id=103841

	I think I find a linux bug, I have the test cases is constructed. I
	can stable recurring problems in fedora22(4.0.4) kernel version,
	arch for x86_64.  I construct transparent huge page, when the parent
	and child process with MAP_SHARE, MAP_PRIVATE way to access the same
	huge page area, it has the opportunity to lead to huge page copy on
	write failure, and then it will munmap the child corresponding mmap
	area, but then the child mmap area with VM_MAYSHARE attributes, child
	process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags
	functions (vma - > vm_flags & VM_MAYSHARE).

There were a number of problems with the report (e.g.  it's hugetlbfs that
triggers this, not transparent huge pages) but it was fundamentally
correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that
looks like this

	 vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000
	 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800
	 prot 8000000000000027 anon_vma           (null) vm_ops ffffffff8182a7a0
	 pgoff 0 file ffff88106bdb9800 private_data           (null)
	 flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb)
	 ------------
	 kernel BUG at mm/hugetlb.c:462!
	 SMP
	 Modules linked in: xt_pkttype xt_LOG xt_limit [..]
	 CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1
	 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012
	 set_vma_resv_flags+0x2d/0x30

The VM_BUG_ON is correct because private and shared mappings have
different reservation accounting but the warning clearly shows that the
VMA is shared.

When a private COW fails to allocate a new page then only the process
that created the VMA gets the page -- all the children unmap the page.
If the children access that data in the future then they get killed.

The problem is that the same file is mapped shared and private.  During
the COW, the allocation fails, the VMAs are traversed to unmap the other
private pages but a shared VMA is found and the bug is triggered.  This
patch identifies such VMAs and skips them.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: SunDong <sund_sky@126.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit description is copied from the original post of this bug:

  http://comments.gmane.org/gmane.linux.kernel.mm/135349

Kernels after v3.9 use kmalloc_size(INDEX_NODE + 1) to get the next
larger cache size than the size index INDEX_NODE mapping.  In kernels
3.9 and earlier we used malloc_sizes[INDEX_L3 + 1].cs_size.

However, sometimes we can't get the right output we expected via
kmalloc_size(INDEX_NODE + 1), causing a BUG().

The mapping table in the latest kernel is like:
    index = {0,   1,  2 ,  3,  4,   5,   6,   n}
     size = {0,   96, 192, 8, 16,  32,  64,   2^n}
The mapping table before 3.10 is like this:
    index = {0 , 1 , 2,   3,  4 ,  5 ,  6,   n}
    size  = {32, 64, 96, 128, 192, 256, 512, 2^(n+3)}

The problem on my mips64 machine is as follows:

(1) When configured DEBUG_SLAB && DEBUG_PAGEALLOC && DEBUG_LOCK_ALLOC
    && DEBUG_SPINLOCK, the sizeof(struct kmem_cache_node) will be "150",
    and the macro INDEX_NODE turns out to be "2": #define INDEX_NODE
    kmalloc_index(sizeof(struct kmem_cache_node))

(2) Then the result of kmalloc_size(INDEX_NODE + 1) is 8.

(3) Then "if(size >= kmalloc_size(INDEX_NODE + 1)" will lead to "size
    = PAGE_SIZE".

(4) Then "if ((size >= (PAGE_SIZE >> 3))" test will be satisfied and
    "flags |= CFLGS_OFF_SLAB" will be covered.

(5) if (flags & CFLGS_OFF_SLAB)" test will be satisfied and will go to
    "cachep->slabp_cache = kmalloc_slab(slab_size, 0u)", and the result
    here may be NULL while kernel bootup.

(6) Finally,"BUG_ON(ZERO_OR_NULL_PTR(cachep->slabp_cache));" causes the
    BUG info as the following shows (may be only mips64 has this problem):

This patch fixes the problem of kmalloc_size(INDEX_NODE + 1) and removes
the BUG by adding 'size >= 256' check to guarantee that all necessary
small sized slabs are initialized regardless sequence of slab size in
mapping table.

Fixes: e3366016 ("slab: Use common kmalloc_index/kmalloc_size...")
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-by: Liuhailong <liu.hailong6@zte.com.cn>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As include/uapi/linux/userfaultfd.h is a user visible header file, it
should not include kernel-exclusive header files.

So trying to build the userfaultfd test program from the selftests
directory fails, since it contains a reference to linux/compiler.h.  As
it turns out, that header is not really needed there, so we can simply
remove it to fix that issue.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With KMEMCHECK=y, KASAN=n:

  arch/x86/platform/efi/efi.c:673:3: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration]
  arch/x86/platform/efi/efi_64.c:139:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration]
  arch/x86/include/asm/desc.h:121:2: error: implicit declaration of function `memcpy' [-Werror=implicit-function-declaration]

Don't #undef memcpy if KASAN=n.

Fixes: 769a8089 ("x86, efi, kasan: #undef memset/memcpy/memmove per arch")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull UBI/UBIFS fixes from Richard Weinberger:
 "This contains three bug fixes for both UBI and UBIFS"

* tag 'upstream-4.3-rc4' of git://git.infradead.org/linux-ubifs:
  UBI: return ENOSPC if no enough space available
  UBI: Validate data_size
  UBIFS: Kill unneeded locking in ubifs_init_security

Pull key signing fixes from James Morris:
 "Keyrings and modsign fixes from David Howells"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MODSIGN: Change from CMS to PKCS#7 signing if the openssl is too old
  X.509: Don't strip leading 00's from key ID when constructing key description
  KEYS: Remove unnecessary header #inclusions from extract-cert.c
  KEYS: Fix race between key destruction and finding a keyring by name

Pull watchdog fixes from Wim Van Sebroeck:
 "This fixes:

   - module autoload for 3 OF platform drivers
   - poweroff behaviour on bcm2835 watchdog device
   - I2C dependencies for iTCO_wdt.c"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: iTCO: Fix dependencies on I2C
  watchdog: bcm2835: Fix poweroff behaviour
  watchdog: Fix module autoload for OF platform driver

Merge tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmin fixes from Guenter Roeck:
 "Fix module autoload for various drivers"

* tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pwm-fan) Fix module autoload for OF platform driver
  hwmon: (gpio-fan) Fix module autoload for OF platform driver
  hwmon: (abx500) Fix module autoload for OF platform driver

Pull RCU fixes from Ingo Molnar:
 "Two RCU fixes:

   - work around bug with recent GCC versions.

   - fix false positive lockdep splat"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Suppress lockdep false positive for rcp->exp_funnel_mutex
  rcu: Change _wait_rcu_gp() to work around GCC bug 67055

As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
having initialized the IPC object state.  Yes, we initialize the IPC
object in a locked state, but with all the lockless RCU lookup work,
that IPC object lock no longer means that the state cannot be seen.

We already did this for the IPC semaphore code (see commit e8577d1f:
"ipc/sem.c: fully initialize sem_array before making it visible") but we
clearly forgot about msg and shm.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI error: init_volumes: not enough PEBs, required 706, available 686
UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1)
UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM
UBI error: ubi_init: cannot attach mtd1

If available PEBs are not enough when initializing volumes, return -ENOSPC
directly. If available PEBs are not enough when initializing WL, return
-ENOSPC instead of -ENOMEM.

Cc: stable@vger.kernel.org
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>

Make sure that data_size is less than LEB size.
Otherwise a handcrafted UBI image is able to trigger
an out of bounds memory access in ubi_compare_lebs().

Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>

Fixes the following lockdep splat:
[    1.244527] =============================================
[    1.245193] [ INFO: possible recursive locking detected ]
[    1.245193] 4.2.0-rc1+ #37 Not tainted
[    1.245193] ---------------------------------------------
[    1.245193] cp/742 is trying to acquire lock:
[    1.245193]  (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0
[    1.245193]
[    1.245193] but task is already holding lock:
[    1.245193]  (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280
[    1.245193]
[    1.245193] other info that might help us debug this:
[    1.245193]  Possible unsafe locking scenario:
[    1.245193]
[    1.245193]        CPU0
[    1.245193]        ----
[    1.245193]   lock(&sb->s_type->i_mutex_key#9);
[    1.245193]   lock(&sb->s_type->i_mutex_key#9);
[    1.245193]
[    1.245193]  *** DEADLOCK ***
[    1.245193]
[    1.245193]  May be due to missing lock nesting notation
[    1.245193]
[    1.245193] 2 locks held by cp/742:
[    1.245193]  #0:  (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50
[    1.245193]  #1:  (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280
[    1.245193]
[    1.245193] stack backtrace:
[    1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37
[    1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014
[    1.245193]  ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5
[    1.245193]  ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68
[    1.245193]  000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500
[    1.245193] Call Trace:
[    1.245193]  [<ffffffff814f6f49>] dump_stack+0x4c/0x65
[    1.245193]  [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510
[    1.245193]  [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0
[    1.245193]  [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80
[    1.245193]  [<ffffffff810a1a93>] lock_acquire+0xd3/0x270
[    1.245193]  [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0
[    1.245193]  [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0
[    1.245193]  [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0
[    1.245193]  [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280
[    1.245193]  [<ffffffff81195d15>] vfs_create+0x95/0xc0
[    1.245193]  [<ffffffff8119929c>] path_openat+0x7cc/0x1280
[    1.245193]  [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0
[    1.245193]  [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0
[    1.245193]  [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90
[    1.245193]  [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0
[    1.245193]  [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180
[    1.245193]  [<ffffffff8119ac55>] do_filp_open+0x75/0xd0
[    1.245193]  [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40
[    1.245193]  [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180
[    1.245193]  [<ffffffff81189bd9>] do_sys_open+0x129/0x200
[    1.245193]  [<ffffffff81189cc9>] SyS_open+0x19/0x20
[    1.245193]  [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f

While the lockdep splat is a false positive, becuase path_openat holds i_mutex
of the parent directory and ubifs_init_security() tries to acquire i_mutex
of a new inode, it reveals that taking i_mutex in ubifs_init_security() is
in vain because it is only being called in the inode allocation path
and therefore nobody else can see the inode yet.

Cc: stable@vger.kernel.org # 3.20-
Reported-and-tested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-and-tested-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: dedekind1@gmail.com

Merge tag 'keys-fixes-20150925' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus

Keyrings fixes from David Howells, for current Linus.

Pull arch/tile bugfix from Chris Metcalf:
 "This fixes a bug in 'make allmodconfig'"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: fix build failure

When building with allmodconfig the build was failing with the error:

arch/tile/kernel/usb.c:70:1: warning: data definition has no type or storage class [enabled by default]
arch/tile/kernel/usb.c:70:1: error: type defaults to 'int' in declaration of 'arch_initcall' [-Werror=implicit-int]
arch/tile/kernel/usb.c:70:1: warning: parameter names (without types) in function declaration [enabled by default]
arch/tile/kernel/usb.c:63:19: warning: 'tilegx_usb_init' defined but not used [-Wunused-function]

Include linux/module.h to resolve the build failure.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>

If I2C is built as module, the iTCO watchdog driver must be built as module
as well. I2C_I801 must only be selected if I2C is configured.

This fixes the following build errors, seen if I2C=m and ITCO_WDT=y.

i2c-i801.c:(.text+0x2bf055): undefined reference to `i2c_del_adapter'
i2c-i801.c:(.text+0x2c13e0): undefined reference to `i2c_add_adapter'
i2c-i801.c:(.text+0x2c17bd): undefined reference to `i2c_new_device'

Fixes: 2a7a0e9b ("watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint")
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Currently poweroff/halt results in a reboot on the Raspberry Pi.
The firmware uses the RSTS register to know which partiton to
boot from. The partiton value is spread into bits
0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by
the firmware to indicate halt.

The firmware made this change in 19 Aug 2013 and was matched
by the downstream commit:
Changes for new NOOBS multi partition booting from gsh
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

These platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent

Pull RCU fixes from Paul E. McKenney, for two regressions
introduced in this merge window:

  - Fix bug with recent GCCs.
  - Fix false positive lockdep splat.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull MIPS fixes from Ralf Baechle:
 - Properly setup irq handling for ATH79 platforms
 - Fix bootmem mapstart calculation for contiguous maps
 - Handle little endian and older CPUs correct in BPF
 - Fix console for Fulong 2E systems
 - Handle FTLB correctly on R6 CPUs
 - Fixes for CM, GIC and MAAR support code

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Initialise MAARs on secondary CPUs
  MIPS: print MAAR configuration during boot
  MIPS: mm: compile maar_init unconditionally
  irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC.
  irqchip: mips-gic: Convert CPU numbers to VP IDs.
  MIPS: CM: Provide a function to map from CPU to VP ID.
  MIPS: Fix FTLB detection for R6
  MIPS: cpu-features: Add cpu_has_ftlb
  MIPS: ATH79: Add irq chip ar7240-misc-intc
  MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip
  MIPS: BPF: Fix build on pre-R2 little endian CPUs
  MIPS: BPF: Avoid unreachable code on little endian
  MIPS: bootmem: Fix mapstart calculation for contiguous maps
  MIPS: Fix console output for Fulong2e system

Pull perf fixes from Thomas Gleixner:
 "Another pile of fixes for perf:

   - Plug overflows and races in the core code

   - Sanitize the flow of the perf syscall so we error out before
     handling the more complex and hard to undo setups

   - Improve and fix Broadwell and Skylake hardware support

   - Revert a fix which broke what it tried to fix in perf tools

   - A couple of smaller fixes in various places of perf tools"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix copying of /proc/kcore
  perf intel-pt: Remove no_force_psb from documentation
  perf probe: Use existing routine to look for a kernel module by dso->short_name
  perf/x86: Change test_aperfmperf() and test_intel() to static
  tools lib traceevent: Fix string handling in heterogeneous arch environments
  perf record: Avoid infinite loop at buildid processing with no samples
  perf: Fix races in computing the header sizes
  perf: Fix u16 overflows
  perf: Restructure perf syscall point of no return
  perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask
  perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake
  perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific
  perf tools: Bool functions shouldn't return -1
  tools build: Add test for presence of __get_cpuid() gcc builtin
  tools build: Add test for presence of numa_num_possible_cpus() in libnuma
  Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum"
  perf stat: Fix per-pkg event reporting bug

Pull scheduler fix from Thomas Gleixner:
 "A single bug fix for the scheduler to prevent dequeueing of the idle
  task when setting the cpus allowed mask"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix crash trying to dequeue/enqueue the idle thread

Pull locking fix from Thomas Gleixner:
 "A single bugfix for lockdep to preserve the pinning counter when
  rebuilding the lock stack"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix hlock->pin_count reset on lock stack rebuilds

MAARs should be initialised on each CPU (or rather, core) in the system
in order to achieve consistent behaviour & performance. Previously they
have only been initialised on the boot CPU which leads to performance
problems if tasks are later scheduled on a secondary CPU, particularly
if those tasks make use of unaligned vector accesses where some CPUs
don't handle any cases in hardware for non-speculative memory regions.
Fix this by recording the MAAR configuration from the boot CPU and
applying it to secondary CPUs as part of their bringup.
Reported-by: Doug Gilmore <doug.gilmore@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/11239/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Verifying that the MAAR configuration is as expected is useful when
debugging the performance of a system. Print out the memory regions
configured via MAAR along with their attributes.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/11238/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES
was not set, which has been fine since it is only called from the
standard implementation of mem_init which has the same condition. In
preparation for calling it from the SMP startup code on secondary CPUs,
move maar_init outside of the #ifndef such that it is always compiled.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/11237/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

gic_handle_shared_int reads the GIC interrupt pending & mask registers
directly into a bitmap, which is defined as an array of unsigned longs.
The GIC pending registers may be 32 bits wide if the CM is older than
CM3, regardless of the bit width of the CPU, but for MIPS64 kernels
the unsigned longs in the bitmap will be 64 bits wide. In this case we
need to perform 2 x 32 bit reads per 64 bit unsigned long in order to
avoid missing interrupts.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11213/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Make use of the mips_cm_vp_id function to convert from Linux CPU numbers
to the VP IDs used by hardware, which are not identical in all systems.
Without doing so we map interrupts to incorrect VP(E)s.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11212/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The VP ID of a given CPU may not match up with the CPU number used by
Linux. For example, if the width of the VP part of the VP ID is wider
than log2(number of VPs per core) and the system has multiple cores then
this will be the case. Alternatively, if a pre-r6 system implements the
MT ASE with multiple VPEs per core and Linux is built without support
for the MT ASE then the numbers won't match up either. Provide a
function to convert from CPU number to VP ID.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11211/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull x86 fixes from Thomas Gleixner:
 "Two bugfixes from Andy addressing at least some of the subtle NMI
  related wreckage which has been reported by Sasha Levin"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code
  x86/paravirt: Replace the paravirt nop with a bona fide empty function

Pull irq fix from Thomass Gleixner:
 "A bugfix for the atmel aic5 irq chip driver which caches the wrong
  data and thereby breaking resume"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()

Pull ARM fixes from Russell King:
 "Just two fixes: wire up the new system calls added during the last
  merge window, and fix another user access site"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: alignment: fix alignment handling for uaccess changes
  ARM: wire up new syscalls

Pull ARM SoC fixes from Olof Johansson:
 "Our first real batch of fixes this release cycle.  Nothing really
  concerning, and diffstat is a bit inflated due to some DT contents
  moving around on STi platforms.

  There's a collection of them here:

   - A fixup for a build breakage that hits on arm64 allmodconfig in
     QCOM SCM firmware drivers
   - MMC fixes for OMAP that had quite a bit of breakage this merge
     window.
   - Misc build/warning fixes on PXA and OMAP
   - A couple of minor fixes for Beagleboard X15 which is now starting
     to see a few more users in the wild"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver
  ARM: dts: fix omap2+ address translation for pbias
  firmware: qcom: scm: Add function stubs for ARM64
  ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
  ARM: omap2plus_defconfig: enable GPIO_PCA953X
  ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
  ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
  ARM: dts: am57xx-beagle-x15: Update Phy supplies
  ARM: pxa: balloon3: Fix build error
  ARM: dts: Fixup model name for HP t410 dts
  ARM: dts: DRA7: fix a typo in ethernet
  ARM: omap2plus_defconfig: make PCF857x built-in
  ARM: dts: Use ti,pbias compatible string for pbias
  ARM: OMAP5: Cleanup options for SoC only build
  ARM: DRA7: Select missing options for SoC only build
  ARM: OMAP2+: board-generic: Remove stale of_irq macros
  ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well
  ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi
  ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410
  ARM: dts: am335x-phycore-som: Fix mpu voltage
  ...

Pull CIFS fixes from Steve French:
 "Four fixes from testing at the recent SMB3 Plugfest including two
  important authentication ones (one fixes authentication problems to
  some popular servers when clock times differ more than two hours
  between systems, the other fixes Kerberos authentication for SMB3)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  fix encryption error checks on mount
  [SMB3] Fix sec=krb5 on smb3 mounts
  cifs: use server timestamp for ntlmv2 authentication
  disabling oplocks/leases via module parm enable_oplocks broken for SMB3

ARM: pxa: fixes for v4.3

These fixes are mainly regression fixes triggered by irq changes,
common clock framework introduction and sound side-effect of
other platforms.

* tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux:
  ARM: pxa: balloon3: Fix build error
  ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  ARM: pxa: fix DFI bus lockups on startup
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.3-rc cycle:

- Two more patches to fix most of the MMC regressions with the
  PBIAS regulator changes. At least two MMC driver related issues
  still seems to remain for omap3 legacy booting and omap4 duovero.
  Note that the dts changes depend on a recent regulator fix, and
  are based on the regulator commit now in mainline kernel

- Enable autoidle for am43xx clocks to prevent clocks from staying
  always on

- Fix i2c5 pinctrl offsets for omap5-uevm

- Enable PCA953X as that's needed for HDMI to work on omap5

- Update phy supplies for beagle x15 beta board

- Use palmas-usb for on beagle x15 to start using the related
  driver that recently got merged

* tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: fix omap2+ address translation for pbias
  ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
  ARM: omap2plus_defconfig: enable GPIO_PCA953X
  ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
  ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
  ARM: dts: am57xx-beagle-x15: Update Phy supplies
  regulator: pbias: program pbias register offset in pbias driver
  ARM: omap2plus_defconfig: Enable MUSB DMA support
  ARM: DRA752: Add ID detect for ES2.0
  ARM: OMAP3: vc: fix 'or' always true warning
  ARM: OMAP2+: Fix booting if no timer parent clock is available
  ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - check the return value of platform_get_irq as signed int in xgene.

   - skip adf_dev_restore on virtual functions in qat.

   - fix double-free with backlogged requests in marvell_cesa"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: xgene - fix handling platform_get_irq
  crypto: qat - VF should never trigger SBR on PH
  crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests