- 08 Mar, 2022 25 commits
-
-
Paolo Bonzini authored
Allow yielding when zapping SPTEs after the last reference to a valid root is put. Because KVM must drop all SPTEs in response to relevant mmu_notifier events, mark defunct roots invalid and reset their refcount prior to zapping the root. Keeping the refcount elevated while the zap is in-progress ensures the root is reachable via mmu_notifier until the zap completes and the last reference to the invalid, defunct root is put. Allowing kvm_tdp_mmu_put_root() to yield fixes soft lockup issues if the root in being put has a massive paging structure, e.g. zapping a root that is backed entirely by 4kb pages for a guest with 32tb of memory can take hundreds of seconds to complete. watchdog: BUG: soft lockup - CPU#49 stuck for 485s! [max_guest_memor:52368] RIP: 0010:kvm_set_pfn_dirty+0x30/0x50 [kvm] __handle_changed_spte+0x1b2/0x2f0 [kvm] handle_removed_tdp_mmu_page+0x1a7/0x2b8 [kvm] __handle_changed_spte+0x1f4/0x2f0 [kvm] handle_removed_tdp_mmu_page+0x1a7/0x2b8 [kvm] __handle_changed_spte+0x1f4/0x2f0 [kvm] tdp_mmu_zap_root+0x307/0x4d0 [kvm] kvm_tdp_mmu_put_root+0x7c/0xc0 [kvm] kvm_mmu_free_roots+0x22d/0x350 [kvm] kvm_mmu_reset_context+0x20/0x60 [kvm] kvm_arch_vcpu_ioctl_set_sregs+0x5a/0xc0 [kvm] kvm_vcpu_ioctl+0x5bd/0x710 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae KVM currently doesn't put a root from a non-preemptible context, so other than the mmu_notifier wrinkle, yielding when putting a root is safe. Yield-unfriendly iteration uses for_each_tdp_mmu_root(), which doesn't take a reference to each root (it requires mmu_lock be held for the entire duration of the walk). tdp_mmu_next_root() is used only by the yield-friendly iterator. tdp_mmu_zap_root_work() is explicitly yield friendly. kvm_mmu_free_roots() => mmu_free_root_page() is a much bigger fan-out, but is still yield-friendly in all call sites, as all callers can be traced back to some combination of vcpu_run(), kvm_destroy_vm(), and/or kvm_create_vm(). Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220226001546.360188-21-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Use the system worker threads to zap the roots invalidated by the TDP MMU's "fast zap" mechanism, implemented by kvm_tdp_mmu_invalidate_all_roots(). At this point, apart from allowing some parallelism in the zapping of roots, the workqueue is a glorified linked list: work items are added and flushed entirely within a single kvm->slots_lock critical section. However, the workqueue fixes a latent issue where kvm_mmu_zap_all_invalidated_roots() assumes that it owns a reference to all invalid roots; therefore, no one can set the invalid bit outside kvm_mmu_zap_all_fast(). Putting the invalidated roots on a linked list... erm, on a workqueue ensures that tdp_mmu_zap_root_work() only puts back those extra references that kvm_mmu_zap_all_invalidated_roots() had gifted to it. Signed-off-by: -
Sean Christopherson authored
Defer TLB flushes to the caller when freeing TDP MMU shadow pages instead of immediately flushing. Because the shadow pages are freed in an RCU callback, so long as at least one CPU holds RCU, all CPUs are protected. For vCPUs running in the guest, i.e. consuming TLB entries, KVM only needs to ensure the caller services the pending TLB flush before dropping its RCU protections. I.e. use the caller's RCU as a proxy for all vCPUs running in the guest. Deferring the flushes allows batching flushes, e.g. when installing a 1gb hugepage and zapping a pile of SPs. And when zapping an entire root, deferring flushes allows skipping the flush entirely (because flushes are not needed in that case). Avoiding flushes when zapping an entire root is especially important as synchronizing with other CPUs via IPI after zapping every shadow page can cause significant performance issues for large VMs. The issue is exacerbated by KVM zapping entire top-level entries without dropping RCU protection, which can lead to RCU stalls even when zapping roots backing relatively "small" amounts of guest memory, e.g. 2tb. Removing the IPI bottleneck largely mitigates the RCU issues, though it's likely still a problem for 5-level paging. A future patch will further address the problem by zapping roots in multiple passes to avoid holding RCU for an extended duration. Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
When yielding in the TDP MMU iterator, service any pending TLB flush before dropping RCU protections in anticipation of using the caller's RCU "lock" as a proxy for vCPUs in the guest. Signed-off-by:
-
Sean Christopherson authored
Zap only leaf SPTEs in the TDP MMU's zap_gfn_range(), and rename various functions accordingly. When removing mappings for functional correctness (except for the stupid VFIO GPU passthrough memslots bug), zapping the leaf SPTEs is sufficient as the paging structures themselves do not point at guest memory and do not directly impact the final translation (in the TDP MMU). Note, this aligns the TDP MMU with the legacy/full MMU, which zaps only the rmaps, a.k.a. leaf SPTEs, in kvm_zap_gfn_range() and kvm_unmap_gfn_range(). Signed-off-by:
-
Sean Christopherson authored
Now that all callers of zap_gfn_range() hold mmu_lock for write, drop support for zapping with mmu_lock held for read. That all callers hold mmu_lock for write isn't a random coincidence; now that the paths that need to zap _everything_ have their own path, the only callers left are those that need to zap for functional correctness. And when zapping is required for functional correctness, mmu_lock must be held for write, otherwise the caller has no guarantees about the state of the TDP MMU page tables after it has run, e.g. the SPTE(s) it zapped can be immediately replaced by a vCPU faulting in a page. Signed-off-by:
-
Sean Christopherson authored
Add a dedicated helper for zapping a TDP MMU root, and use it in the three flows that do "zap_all" and intentionally do not do a TLB flush if SPTEs are zapped (zapping an entire root is safe if and only if it cannot be in use by any vCPU). Because a TLB flush is never required, unconditionally pass "false" to tdp_mmu_iter_cond_resched() when potentially yielding. Opportunistically document why KVM must not yield when zapping roots that are being zapped by kvm_tdp_mmu_put_root(), i.e. roots whose refcount has reached zero, and further harden the flow to detect improper KVM behavior with respect to roots that are supposed to be unreachable. In addition to hardening zapping of roots, isolating zapping of roots will allow future simplification of zap_gfn_range() by having it zap only leaf SPTEs, and by removing its tricky "zap all" heuristic. By having all paths that truly need to free _all_ SPs flow through the dedicated root zapper, the generic zapper can be freed of those concerns. Signed-off-by:
-
Sean Christopherson authored
Don't flush the TLBs when zapping all TDP MMU pages, as the only time KVM uses the slow version of "zap everything" is when the VM is being destroyed or the owning mm has exited. In either case, KVM_RUN is unreachable for the VM, i.e. the guest TLB entries cannot be consumed. Signed-off-by:
Mingwei Zhang <mizhang@google.com> Signed-off-by:
-
Sean Christopherson authored
When recovering a potential hugepage that was shattered for the iTLB multihit workaround, precisely zap only the target page instead of iterating over the TDP MMU to find the SP that was passed in. This will allow future simplification of zap_gfn_range() by having it zap only leaf SPTEs. Signed-off-by:
-
Sean Christopherson authored
Refactor __tdp_mmu_set_spte() to work with raw values instead of a tdp_iter objects so that a future patch can modify SPTEs without doing a walk, and without having to synthesize a tdp_iter. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
WARN if the new_spte being set by __tdp_mmu_set_spte() is a REMOVED_SPTE, which is called out by the comment as being disallowed but not actually checked. Keep the WARN on the old_spte as well, because overwriting a REMOVED_SPTE in the non-atomic path is also disallowed (as evidence by lack of splats with the existing WARN). Fixes: 08f07c80 ("KVM: x86/mmu: Flush TLBs after zap in TDP MMU PF handler") Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Add helpers to read and write TDP MMU SPTEs instead of open coding rcu_dereference() all over the place, and to provide a convenient location to document why KVM doesn't exempt holding mmu_lock for write from having to hold RCU (and any future changes to the rules). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop RCU protection after processing each root when handling MMU notifier hooks that aren't the "unmap" path, i.e. aren't zapping. Temporarily drop RCU to let RCU do its thing between roots, and to make it clear that there's no special behavior that relies on holding RCU across all roots. Currently, the RCU protection is completely superficial, it's necessary only to make rcu_dereference() of SPTE pointers happy. A future patch will rely on holding RCU as a proxy for vCPUs in the guest, e.g. to ensure shadow pages aren't freed before all vCPUs do a TLB flush (or rather, acknowledge the need for a flush), but in that case RCU needs to be held until the flush is complete if and only if the flush is needed because a shadow page may have been removed. And except for the "unmap" path, MMU notifier events cannot remove SPs (don't toggle PRESENT bit, and can't change the PFN for a SP). Signed-off-by:
-
Sean Christopherson authored
Batch TLB flushes (with other MMUs) when handling ->change_spte() notifications in the TDP MMU. The MMU notifier path in question doesn't allow yielding and correcty flushes before dropping mmu_lock. Signed-off-by:
-
Sean Christopherson authored
Look for a !leaf=>leaf conversion instead of a PFN change when checking if a SPTE change removed a TDP MMU shadow page. Convert the PFN check into a WARN, as KVM should never change the PFN of a shadow page (except when its being zapped or replaced). From a purely theoretical perspective, it's not illegal to replace a SP with a hugepage pointing at the same PFN. In practice, it's impossible as that would require mapping guest memory overtop a kernel-allocated SP. Either way, the check is odd. Signed-off-by:
-
Paolo Bonzini authored
Remove the "shared" argument of for_each_tdp_mmu_root_yield_safe, thus ensuring that readers do not ever acquire a reference to an invalid root. After this patch, all readers except kvm_tdp_mmu_zap_invalidated_roots() treat refcount=0/valid, refcount=0/invalid and refcount=1/invalid in exactly the same way. kvm_tdp_mmu_zap_invalidated_roots() is different but it also does not acquire a reference to the invalid root, and it cannot see refcount=0/invalid because it is guaranteed to run after kvm_tdp_mmu_invalidate_all_roots(). Opportunistically add a lockdep assertion to the yield-safe iterator. Signed-off-by: -
Paolo Bonzini authored
Eager page splitting is an optimization; it does not have to be performed on invalid roots. It is also the only case in which a reader might acquire a reference to an invalid root, so after this change we know that readers will skip both dying and invalid roots. Signed-off-by: -
Sean Christopherson authored
Assert that mmu_lock is held for write by users of the yield-unfriendly TDP iterator. The nature of a shared walk means that the caller needs to play nice with other tasks modifying the page tables, which is more or less the same thing as playing nice with yielding. Theoretically, KVM could gain a flow where it could legitimately take mmu_lock for read in a non-preemptible context, but that's highly unlikely and any such case should be viewed with a fair amount of scrutiny. Signed-off-by:
-
Sean Christopherson authored
Remove the misleading flush "handling" when zapping invalidated TDP MMU roots, and document that flushing is unnecessary for all flavors of MMUs when zapping invalid/obsolete roots/pages. The "handling" in the TDP MMU is dead code, as zap_gfn_range() is called with shared=true, in which case it will never return true due to the flushing being handled by tdp_mmu_zap_spte_atomic(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Explicitly ignore the result of zap_gfn_range() when putting the last reference to a TDP MMU root, and add a pile of comments to formalize the TDP MMU's behavior of deferring TLB flushes to alloc/reuse. Note, this only affects the !shared case, as zap_gfn_range() subtly never returns true for "flush" as the flush is handled by tdp_mmu_zap_spte_atomic(). Putting the root without a flush is ok because even if there are stale references to the root in the TLB, they are unreachable because KVM will not run the guest with the same ASID without first flushing (where ASID in this context refers to both SVM's explicit ASID and Intel's implicit ASID that is constructed from VPID+PCID+EPT4A+etc...). Signed-off-by:
-
Sean Christopherson authored
Fix misleading and arguably wrong comments in the TDP MMU's fast zap flow. The comments, and the fact that actually zapping invalid roots was added separately, strongly suggests that zapping invalid roots is an optimization and not required for correctness. That is a lie. KVM _must_ zap invalid roots before returning from kvm_mmu_zap_all_fast(), because when it's called from kvm_mmu_invalidate_zap_pages_in_memslot(), KVM is relying on it to fully remove all references to the memslot. Once the memslot is gone, KVM's mmu_notifier hooks will be unable to find the stale references as the hva=>gfn translation is done via the memslots. If KVM doesn't immediately zap SPTEs and userspace unmaps a range after deleting a memslot, KVM will fail to zap in response to the mmu_notifier due to not finding a memslot corresponding to the notifier's range, which leads to a variation of use-after-free. The other misleading comment (and code) explicitly states that roots without a reference should be skipped. While that's technically true, it's also extremely misleading as it should be impossible for KVM to encounter a defunct root on the list while holding mmu_lock for write. Opportunistically add a WARN to enforce that invariant. Fixes: b7cccd39 ("KVM: x86/mmu: Fast invalidation for TDP MMU") Fixes: 4c6654bd ("KVM: x86/mmu: Tear down roots before kvm_mmu_zap_all_fast returns") Signed-off-by:
-
Sean Christopherson authored
Explicitly check for present SPTEs when clearing dirty bits in the TDP MMU. This isn't strictly required for correctness, as setting the dirty bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT. However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would complain if anyone actually turned on KVM's MMU debugging. Fixes: a6a0b05d ("kvm: x86/mmu: Support dirty logging for the TDP MMU") Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Paolo Bonzini authored
Allocations whose size is related to the memslot size can be arbitrarily large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy" sizes that fit in 32 bits. Cc: stable@vger.kernel.org Fixes: 7661809d ("mm: don't allow oversized kvmalloc() calls") Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Instead of using array_size or just a multiply, use a function that takes care of both the multiplication and the overflow checks. Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Paolo Bonzini authored
Linux has dozens of occurrences of vmalloc(array_size()) and vzalloc(array_size()). Allow to simplify the code by providing vmalloc_array and vcalloc, as well as the underscored variants that let the caller specify the GFP flags. Acked-by:
-
- 04 Mar, 2022 1 commit
-
-
Paolo Bonzini authored
Merge bugfixes from 5.17 before merging more tricky work.
-
- 02 Mar, 2022 2 commits
-
-
Paolo Bonzini authored
kvm_arch_vcpu_ioctl_run is already doing srcu_read_lock/unlock in two places, namely vcpu_run and post_kvm_run_save, and a third is actually needed around the call to vcpu->arch.complete_userspace_io to avoid the following splat: WARNING: suspicious RCU usage arch/x86/kvm/pmu.c:190 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by CPU 28/KVM/370841: #0: ff11004089f280b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x87/0x730 [kvm] Call Trace: <TASK> dump_stack_lvl+0x59/0x73 reprogram_fixed_counter+0x15d/0x1a0 [kvm] kvm_pmu_trigger_event+0x1a3/0x260 [kvm] ? free_moved_vector+0x1b4/0x1e0 complete_fast_pio_in+0x8a/0xd0 [kvm] This splat is not at all unexpected, since complete_userspace_io callbacks can execute similar code to vmexits. For example, SVM with nrips=false will call into the emulator from svm_skip_emulated_instruction(). While it's tempting to never acquire kvm->srcu for an uninitialized vCPU, practically speaking there's no penalty to acquiring kvm->srcu "early" as the KVM_MP_STATE_UNINITIALIZED path is a one-time thing per vCPU. On the other hand, seemingly innocuous helpers like kvm_apic_accept_events() and sync_regs() can theoretically reach code that might access SRCU-protected data structures, e.g. sync_regs() can trigger forced existing of nested mode via kvm_vcpu_ioctl_x86_set_vcpu_events(). Reported-by:Like Xu <likexu@tencent.com> Co-developed-by:
-
Like Xu authored
Just like on the optional mmu_alloc_direct_roots() path, once shadow path reaches "r = -EIO" somewhere, the caller needs to know the actual state in order to enter error handling and avoid something worse. Fixes: 4a38162e ("KVM: MMU: load PDPTRs outside mmu_lock") Signed-off-by:
-
- 01 Mar, 2022 12 commits
-
-
Sean Christopherson authored
Disable preemption when loading/putting the AVIC during an APICv refresh. If the vCPU task is preempted and migrated ot a different pCPU, the unprotected avic_vcpu_load() could set the wrong pCPU in the physical ID cache/table. Pull the necessary code out of avic_vcpu_{,un}blocking() and into a new helper to reduce the probability of introducing this exact bug a third time. Fixes: df7e4827 ("KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC") Cc: stable@vger.kernel.org Reported-by:Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Exit to userspace if setup_vmgexit_scratch() fails due to OOM or because copying data from guest (userspace) memory failed/faulted. The OOM scenario is clearcut, it's userspace's decision as to whether it should terminate the guest, free memory, etc... As for -EFAULT, arguably, any guest issue is a violation of the guest's contract with userspace, and thus userspace needs to decide how to proceed. E.g. userspace defines what is RAM vs. MMIO and communicates that directly to the guest, KVM is not involved in deciding what is/isn't RAM nor in communicating that information to the guest. If the scratch GPA doesn't resolve to a memslot, then the guest is not honoring the memory configuration as defined by userspace. And if userspace unmaps an hva for whatever reason, then exiting to userspace with -EFAULT is absolutely the right thing to do. KVM's ABI currently sucks and doesn't provide enough information to act on the -EFAULT, but that will hopefully be remedied in the future as there are multiple use cases, e.g. uffd and virtiofs truncation, that shouldn't require any work in KVM beyond returning -EFAULT with a small amount of metadata. KVM could define its ABI such that failure to access the scratch area is reflected into the guest, i.e. establish a contract with userspace, but that's undesirable as it limits KVM's options in the future, e.g. in the potential uffd case any failure on a uaccess needs to kick out to userspace. KVM does have several cases where it reflects these errors into the guest, e.g. kvm_pv_clock_pairing() and Hyper-V emulation, but KVM would preferably "fix" those instead of propagating the falsehood that any memory failure is the guest's fault. Lastly, returning a boolean as an "error" for that a helper that isn't named accordingly never works out well. Fixes: ad5b3532 ("KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure") Cc: Alper Gun <alpergun@google.com> Cc: Peter Gonda <pgonda@google.com> Signed-off-by:
-
Sean Christopherson authored
WARN and bail if is_unsync_root() is passed a root for which there is no shadow page, i.e. is passed the physical address of one of the special roots, which do not have an associated shadow page. The current usage squeaks by without bug reports because neither kvm_mmu_sync_roots() nor kvm_mmu_sync_prev_roots() calls the helper with pae_root or pml4_root, and 5-level AMD CPUs are not generally available, i.e. no one can coerce KVM into calling is_unsync_root() on pml5_root. Note, this doesn't fix the mess with 5-level nNPT, it just (hopefully) prevents KVM from crashing. Cc: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
-
Sean Christopherson authored
Remove the now unused KVM_REQ_MMU_RELOAD, shift KVM_REQ_VM_DEAD into the unoccupied space, and update vcpu-requests.rst, which was missing an entry for KVM_REQ_VM_DEAD. Switching KVM_REQ_VM_DEAD to entry '1' also fixes the stale comment about bits 4-7 being reserved. Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by:
-
Sean Christopherson authored
Add an arch request, KVM_REQ_REFRESH_GUEST_PREFIX, to deal with guest prefix changes instead of piggybacking KVM_REQ_MMU_RELOAD. This will allow for the removal of the generic KVM_REQ_MMU_RELOAD, which isn't actually used by generic KVM. No functional change intended. Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
-
Sean Christopherson authored
Zap only obsolete roots when responding to zapping a single root shadow page. Because KVM keeps root_count elevated when stuffing a previous root into its PGD cache, shadowing a 64-bit guest means that zapping any root causes all vCPUs to reload all roots, even if their current root is not affected by the zap. For many kernels, zapping a single root is a frequent operation, e.g. in Linux it happens whenever an mm is dropped, e.g. process exits, etc... Signed-off-by:
-
Sean Christopherson authored
Remove the generic kvm_reload_remote_mmus() and open code its functionality into the two x86 callers. x86 is (obviously) the only architecture that uses the hook, and is also the only architecture that uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That will change in a future patch, as x86's usage when zapping a single shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only MMUs whose root is being zapped actually need to be reloaded. s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose. Drop the generic code in anticipation of implementing s390 and x86 arch specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely. Opportunistically reword the x86 TDP MMU comment to avoid making references to functions (and requests!) when possible, and to remove the rather ambiguous "this". No functional change intended. Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Replace a KVM_REQ_MMU_RELOAD request with a direct kvm_mmu_unload() call when the guest's CR4.PCIDE changes. This will allow tweaking the logic of KVM_REQ_MMU_RELOAD to free only obsolete/invalid roots, which is the historical intent of KVM_REQ_MMU_RELOAD. The recent PCIDE behavior is the only user of KVM_REQ_MMU_RELOAD that doesn't mark affected roots as obsolete, needs to unconditionally unload the entire MMU, _and_ affects only the current vCPU. Signed-off-by:
-
Hou Wenlong authored
KVM: x86/emulator: Move the unhandled outer privilege level logic of far return into __load_segment_descriptor() Outer-privilege level return is not implemented in emulator, move the unhandled logic into __load_segment_descriptor to make it easier to understand why the checks for RET are incomplete. Suggested-by:
Hou Wenlong <houwenlong.hwl@antgroup.com> Message-Id: <5b7188e6388ac9f4567d14eab32db9adf3e00119.1644292363.git.houwenlong.hwl@antgroup.com> Signed-off-by:
-
Hou Wenlong authored
Code segment descriptor can be loaded by jmp/call/ret, iret and int. The privilege checks are different between those instructions above realmode. Although, the emulator has use x86_transfer_type enumerate to differentiate them, but it is not really used in __load_segment_descriptor(). Note, far jump/call to call gate, task gate or task state segment are not implemented in emulator. As for far jump/call to code segment, if DPL > CPL for conforming code or (RPL > CPL or DPL != CPL) for non-conforming code, it should trigger #GP. The current checks are ok. As for far return, if RPL < CPL or DPL > RPL for conforming code or DPL != RPL for non-conforming code, it should trigger #GP. Outer level return is not implemented above virtual-8086 mode in emulator. So it implies that RPL <= CPL, but the current checks wouldn't trigger #GP if RPL < CPL. As for code segment loading in task switch, if DPL > RPL for conforming code or DPL != RPL for non-conforming code, it should trigger #TS. Since segment selector is loaded before segment descriptor when load state from tss, it implies that RPL = CPL, so the current checks are ok. The only problem in current implementation is missing RPL < CPL check for far return. However, change code to follow the manual is better. Reviewed-by:
-
Hou Wenlong authored
Per Intel's SDM on the "Instruction Set Reference", when loading segment descriptor, not-present segment check should be after all type and privilege checks. But the emulator checks it first, then #NP is triggered instead of #GP if privilege fails and segment is not present. Put not-present segment check after type and privilege checks in __load_segment_descriptor(). Fixes: 38ba30ba (KVM: x86 emulator: Emulate task switch in emulator.c) Reviewed-by:
-
Sean Christopherson authored
The main thing that the selftest verifies is that KVM copies x2APIC's ICR[63:32] to/from ICR2 when userspace accesses the vAPIC page via KVM_{G,S}ET_LAPIC. KVM previously split x2APIC ICR to ICR+ICR2 at the time of write (from the guest), and so KVM must preserve that behavior for backwards compatibility between different versions of KVM. It will also test other invariants, e.g. that KVM clears the BUSY flag on ICR writes, that the reserved bits in ICR2 are dropped on writes from the guest, etc... Signed-off-by:
-
