- 12 Jul, 2022 1 commit
-
-
Frank Li authored
Some PCI Endpoint controllers integrate an eDMA (embedded DMA). eDMA can bypass the outbound memory address translation unit to access all RC memory space. Add eDMA support for pci-epf-test. Depending on HW availability, the EPF test can use either eDMA or general system DMA controllers to perform DMA. The test tries to use eDMA first and falls back to general system DMA controllers if there's no eDMA Separate dma_chan to dma_chan_tx and dma_chan_rx. Search for an eDMA channel first, then search for a memory-to-memory DMA channel. If general memory to memory channels are used, dma_chan_rx = dma_chan_tx. Add dma_addr_t dma_remote in pci_epf_test_data_transfer() because eDMA uses remote RC physical address directly. Add enum dma_transfer_direction dir in pci_epf_test_data_transfer() because eDMA chooses the correct RX/TX channel by dir. The overall steps are: 1. Execute dma_request_channel() and filter function to find correct eDMA RX and TX Channel. If a channel does not exist, fallback to try to allocate general memory to memory DMA channel. 2. Execute dmaengine_slave_config() to configure remote side physical address. 3. Execute dmaengine_prep_slave_single() to create transfer descriptor. 4. Execute tx_submit(). 5. Execute dma_async_issue_pending() [bhelgaas: squash in fix from Dan Carpenter <dan.carpenter@oracle.com>: https://lore.kernel.org/r/Ys2GSTnZhuLzzQG5@kili, also previously posted by Peng Wu <wupeng58@huawei.com>: https://lore.kernel.org/all/CANXvt5rK98-cEMgpzopY9POOK8a5=VDib8uKPLgJakOG=hRfwQ@mail.gmail.com/] Link: https://lore.kernel.org/r/20220524152159.2370739-9-Frank.Li@nxp.comSigned-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-By: Vinod Koul <vkoul@kernel.org>
-
- 23 Jun, 2022 6 commits
-
-
Frank Li authored
Add a "flags" field to the "struct dw_edma_chip" so that the controller drivers can pass flags that are relevant to the platform. DW_EDMA_CHIP_LOCAL - Used by the controller drivers accessing eDMA locally. Local eDMA access doesn't require generating MSIs to the remote. Link: https://lore.kernel.org/r/20220524152159.2370739-8-Frank.Li@nxp.comTested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
-
Serge Semin authored
In accordance with [1, 2] the DW eDMA controller has been created to be part of the DW PCIe Root Port and DW PCIe End-point controllers and to offload the transferring of large blocks of data between application and remote PCIe domains leaving the system CPU free for other tasks. In the first case (eDMA being part of DW PCIe Root Port) the eDMA controller is always accessible via the CPU DBI interface and never over the PCIe wire. The latter case is more complex. Depending on the DW PCIe End-Point IP-core synthesize parameters it's possible to have the eDMA registers accessible not only from the application CPU side, but also via mapping the eDMA CSRs over a dedicated endpoint BAR. So based on the specifics denoted above the eDMA driver is supposed to support two types of the DMA controller setups: 1) eDMA embedded into the DW PCIe Root Port/End-point and accessible over the local CPU from the application side. 2) eDMA embedded into the DW PCIe End-point and accessible via the PCIe wire with MWr/MRd TLPs generated by the CPU PCIe host controller. Since the CPU memory resides different sides in these cases the semantics of the MEM_TO_DEV and DEV_TO_MEM operations is flipped with respect to the Tx and Rx DMA channels. So MEM_TO_DEV/DEV_TO_MEM corresponds to the Tx/Rx channels in setup 1) and to the Rx/Tx channels in case of setup 2). The DW eDMA driver has supported the case 2) since e63d79d1 ("dmaengine: Add Synopsys eDMA IP core driver") in the framework of the drivers/dma/dw-edma/dw-edma-pcie.c driver. The case 1) support was added later by bd96f1b2 ("dmaengine: dw-edma: support local dma device transfer semantics"). Afterwards the driver was supposed to cover the both possible eDMA setups, but the latter commit turned out to be not fully correct. The problem was that the commit together with the new functionality support also changed the channel direction semantics so the eDMA Read-channel (corresponding to the DMA_DEV_TO_MEM direction for case 1) now uses the sgl/cyclic base addresses as the Source addresses of the DMA transfers and dma_slave_config.dst_addr as the Destination address of the DMA transfers. Similarly the eDMA Write-channel (corresponding to the DMA_MEM_TO_DEV direction for case 1) now uses dma_slave_config.src_addr as a source address of the DMA transfers and sgl/cyclic base address as the Destination address of the DMA transfers. This contradicts the logic of the DMA-interface, which implies that DEV side is supposed to belong to the PCIe device memory and MEM - to the CPU/Application memory. Indeed it seems irrational to have the SG-list defined in the PCIe bus space, while expecting a contiguous buffer allocated in the CPU memory. Moreover the passed SG-list and cyclic DMA buffers are supposed to be mapped in a way so to be seen by the DW eDMA Application (CPU) interface. So in order to have the correct DW eDMA interface we need to invert the eDMA Rd/Wr-channels and DMA-slave directions semantics by selecting the src/dst addresses based on the DMA transfer direction instead of using the channel direction capability. [1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, v.5.40a, March 2019, p.1092 [2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint, v.5.40a, March 2019, p.1189 Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Fixes: bd96f1b2 ("dmaengine: dw-edma: support local dma device transfer semantics") Link: https://lore.kernel.org/r/20220524152159.2370739-7-Frank.Li@nxp.comTested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Vinod Koul <vkoul@kernel.org>
-
Serge Semin authored
The dma_slave_config.direction field usage in the DW eDMA driver was introduced by bd96f1b2 ("dmaengine: dw-edma: support local dma device transfer semantics"). Mainly the change introduced there was correct (indeed DEV_TO_MEM means using RD-channel and MEM_TO_DEV - WR-channel for the case of having eDMA accessed locally from CPU/Application side), but providing an additional MEM_TO_MEM/DEV_TO_DEV-based semantics was quite redundant if not to say potentially harmful (when it comes to removing the denoted field). First of all since the dma_slave_config.direction field has been marked as obsolete (see [1] and the struct dma_slave_config [2]) and will be discarded in future, using it especially in a non-standard way is discouraged. Secondly in accordance with the commit denoted above the default dw_edma_device_transfer() semantics has been changed despite what its message said. So claiming that the method was left backward compatible was wrong. Fix the problems denoted above and simplify the dw_edma_device_transfer() method by dropping the parsing of the DMA-channel direction field. Instead of having that implicit dma_slave_config.direction field semantic, use the recently added DW_EDMA_CHIP_LOCAL flag to distinguish between the local and remote DW eDMA setups thus preserving support for both cases. Add an ASCII figure to clarify the situation. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/driver-api/dmaengine/provider.rst?id=v5.18#n478 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/dmaengine.h?id=v5.18#n389 [bhelgaas: convert references to specific URLs] Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20220524152159.2370739-6-Frank.Li@nxp.comTested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Vinod Koul <vkoul@kernel.org>
-
Frank Li authored
The struct dw_edma contains wr(rd)_ch_cnt fields. The EDMA driver gets write(read) channel number from register, then saves these into dw_edma. The wr(rd)_ch_cnt in dw_edma_chip actually means how many link list memory are available in ll_region_wr(rd)[EDMA_MAX_WR_CH]. Rename it to ll_wr(rd)_cnt to indicate actual usage. Link: https://lore.kernel.org/r/20220524152159.2370739-5-Frank.Li@nxp.comTested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
-
Frank Li authored
struct dw_edma_region rg_region included virtual address, physical address and size information. But only the virtual address is used by EDMA driver. Change it to void __iomem *reg_base to clean up code. Link: https://lore.kernel.org/r/20220524152159.2370739-4-Frank.Li@nxp.comTested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
-
Frank Li authored
"struct dw_edma_chip" contains an internal structure "struct dw_edma" that is used by the eDMA core internally and should not be touched by the eDMA controller drivers themselves. But currently, the eDMA controller drivers like "dw-edma-pci" allocate and populate this internal structure before passing it on to the eDMA core. The eDMA core further populates the structure and uses it. This is wrong! Hence, move all the "struct dw_edma" specifics from controller drivers to the eDMA core. Link: https://lore.kernel.org/r/20220524152159.2370739-3-Frank.Li@nxp.comTested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
-
- 16 Jun, 2022 1 commit
-
-
Frank Li authored
The "irq" field of struct dw_edma_chip was never used. Remove it. Link: https://lore.kernel.org/r/20220524152159.2370739-2-Frank.Li@nxp.comTested-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org>
-
- 06 Jun, 2022 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
Linus Torvalds authored
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953f ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194e ("Unify the primitives for file descriptor closing") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot update from Thomas Gleixner: "Use strlcpy() instead of strscpy() in arch_setup()" * tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Use strscpy() to replace deprecated strlcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clockevent/clocksource updates from Thomas Gleixner: - Device tree bindings for MT8186 - Tell the kernel that the RISC-V SBI timer stops in deeper power states - Make device tree parsing in sp804 more robust - Dead code removal and tiny fixes here and there - Add the missing SPDX identifiers * tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check clocksource/drivers/timer-sun5i: Convert to SPDX identifier clocksource/drivers/timer-sun4i: Convert to SPDX identifier clocksource/drivers/pistachio: Convert to SPDX identifier clocksource/drivers/orion: Convert to SPDX identifier clocksource/drivers/lpc32xx: Convert to SPDX identifier clocksource/drivers/digicolor: Convert to SPDX identifier clocksource/drivers/armada-370-xp: Convert to SPDX identifier clocksource/drivers/mips-gic-timer: Convert to SPDX identifier clocksource/drivers/jcore: Convert to SPDX identifier clocksource/drivers/bcm_kona: Convert to SPDX identifier clocksource/drivers/sp804: Avoid error on multiple instances clocksource/drivers/riscv: Events are stopped during CPU suspend clocksource/drivers/ixp4xx: Drop boardfile probe path dt-bindings: timer: Add compatible for Mediatek MT8186
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "Fix the fallout of sysctl code move which placed the init function wrong" * tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Fix sysctl move
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: - Make the ICL event constraints match reality - Remove a unused local variable * tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove unused local variable perf/x86/intel: Fix event constraints for ICL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixlet from Thomas Gleixner: "Trivial indentation fix in Kconfig" * tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/Kconfig: Fix indentation in the Kconfig file
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fixes from Thomas Gleixner: - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as noreturn - Allow architectures to select uaccess validation - Use the non-instrumented bit test for test_cpu_has() to prevent escape from non-instrumentable regions - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape from non-instrumentable regions - Mark a few tiny inline as __always_inline to prevent GCC from bringing them out of line and instrumenting them - Mark the empty stub context_tracking_enabled() as always inline as GCC brings them out of line and instruments the empty shell - Annotate ex_handler_msr_mce() as dead end * tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/extable: Annotate ex_handler_msr_mce() as a dead end context_tracking: Always inline empty stubs x86: Always inline on_thread_stack() and current_top_of_stack() jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds x86/cpu: Elide KCSAN for cpu_has() and friends objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes plus other trivial updates. The major change of note is moving ufs out of scsi and a minor update to lpfc vmid handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters scsi: mpi3mr: Fix kernel-doc scsi: lpfc: Add support for ATTO Fibre Channel devices scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning scsi: sd_zbc: Prevent zone information memory leak scsi: sd: Fix potential NULL pointer dereference scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings scsi: myrb: Fix up null pointer access on myrb_cleanup() scsi: core: Unexport scsi_bus_type scsi: sd: Don't call blk_cleanup_disk() in sd_probe() scsi: ufs: ufshcd: Delete unnecessary NULL check scsi: isci: Fix typo in comment scsi: pmcraid: Fix typo in comment scsi: smartpqi: Fix typo in comment scsi: qedf: Fix typo in comment scsi: esas2r: Fix typo in comment scsi: storvsc: Fix typo in comment scsi: ufs: Split the drivers/scsi/ufs directory scsi: qla1280: Remove redundant variable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linuxLinus Torvalds authored
Pull hardware timestamping subsystem from Thierry Reding: "This contains the new HTE (hardware timestamping engine) subsystem that has been in the works for a couple of months now. The infrastructure provided allows for drivers to register as hardware timestamp providers, while consumers will be able to request events that they are interested in (such as GPIOs and IRQs) to be timestamped by the hardware providers. Note that this currently supports only one provider, but there seems to be enough interest in this functionality and we expect to see more drivers added once this is merged" [ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake platforms as another future timestamp provider ] * tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: timestamp: Correct id path dt-bindings: Renamed hte directory to timestamp hte: Uninitialized variable in hte_ts_get() hte: Fix off by one in hte_push_ts_ns() hte: Fix possible use-after-free in tegra_hte_test_remove() hte: Remove unused including <linux/version.h> MAINTAINERS: Add HTE Subsystem hte: Add Tegra HTE test driver tools: gpio: Add new hardware clock type gpiolib: cdev: Add hardware timestamp clock type gpio: tegra186: Add HTE support gpiolib: Add HTE support dt-bindings: Add HTE bindings hte: Add Tegra194 HTE kernel provider drivers: Add hardware timestamp engine (HTE) subsystem Documentation: Add HTE subsystem guide
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - Fix build regressions for parisc, csky, nios2, openrisc - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT - Remove arch/parisc/nm, which was presumably a workaround for old tools - Check the odd combination of EXPORT_SYMBOL and 'static' precisely - Make external module builds robust against "too long argument error" - Support j, k keys for moving the cursor in nconfig * tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: Allow to select bash in a modified environment scripts: kconfig: nconf: make nconfig accept jk keybindings modpost: use fnmatch() to simplify match() modpost: simplify mod->name allocation kbuild: factor out the common objtool arguments kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o kbuild: clean .tmp_* pattern by make clean kbuild: remove redundant cleanups in scripts/link-vmlinux.sh kbuild: rebuild multi-object modules when objtool is updated kbuild: add cmd_and_savecmd macro kbuild: make *.mod rule robust against too long argument error kbuild: make built-in.a rule robust against too long argument error kbuild: check static EXPORT_SYMBOL* by script instead of modpost parisc: remove arch/parisc/nm kbuild: do not create *.prelink.o for Clang LTO or IBT kbuild: replace $(linked-object) with CONFIG options kbuild: do not try to parse *.cmd files for objects provided by compiler kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost modpost: squash if...else-if in find_elf_symbol2() modpost: reuse ARRAY_SIZE() macro for section_mismatch() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs pathname updates from Al Viro: "Several cleanups in fs/namei.c" * tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: namei: cleanup double word in comment get rid of dead code in legitimize_root() fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull mount handling updates from Al Viro: "Cleanups (and one fix) around struct mount handling. The fix is usermode_driver.c one - once you've done kern_mount(), you must kern_unmount(); simple mntput() will end up with a leak. Several failure exits in there messed up that way... In practice you won't hit those particular failure exits without fault injection, though" * tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: move mount-related externs from fs.h to mount.h blob_to_mnt(): kern_unmount() is needed to undo kern_mount() m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb... linux/mount.h: trim includes uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor updates from Al Viro. - Descriptor handling cleanups * tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Unify the primitives for file descriptor closing fs: remove fget_many and fput_many interface io_uring_enter(): don't leave f.flags uninitialized
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: "Nine cifs/smb3 client fixes. Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated message cleanup and a double free and deadlock fix" * tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share cifs: skip trailing separators of prefix paths cifs: update internal module number cifs: version operations for smb20 unneeded when legacy support disabled cifs: do not build smb1ops if legacy support is disabled cifs: fix potential deadlock in direct reclaim cifs: when extending a file with falloc we should make files not-sparse cifs: remove repeated debug message on cifs_put_smb_ses() cifs: fix potential double free during failed mount
-
- 04 Jun, 2022 9 commits
-
-
Schspa Shi authored
This fixes the build error when the system has a default bash version which is too old to support associative array variables. The build error log as fellowing: linux/scripts/check-local-export: line 11: declare: -A: invalid option declare: usage: declare [-afFirtx] [-p] [name[=value] ...] Signed-off-by: Schspa Shi <schspa@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Isak Ellmer authored
Make nconfig accept jk keybindings for movement in addition to arrow keys. Signed-off-by: Isak Ellmer <isak01@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Replace the own implementation for wildcard (glob) matching with a function call to fnmatch(). Also, change the return type to 'bool'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
mod->name is set to the ELF filename with the suffix ".o" stripped. The current code calls strdup() and free() to manipulate the string, but a simpler approach is to pass new_module() with the name length subtracted by 2. Also, check if the passed filename ends with ".o" before stripping it. The current code blindly chops the suffix: tmp[strlen(tmp) - 2] = '\0' It will cause buffer under-run if strlen(tmp) < 2; Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-
Masahiro Yamada authored
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups for the objtool arguments. It was difficult to factor out them because all the vmlinux build rules were written in a shell script. It is somewhat tedious to touch the two files every time a new objtool option is supported. To reduce the code duplication, move the objtool for vmlinux.o into scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib so they are shared between Makefile.build and Makefile.vmlinux_o. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
-
Masahiro Yamada authored
This is a preparation for moving the objtool rule in the next commit. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
-
Masahiro Yamada authored
Change the "make clean" rule to remove all the .tmp_* files. .tmp_objdiff is the only exception, which should be removed by "make mrproper". Rename the record directory of objdiff, .tmp_objdiff to .objdiff to avoid the removal by "make clean". Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
-
https://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc architecture updates from Helge Deller: "A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and add auto-detection of primary graphics card for framebuffer driver" * tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/stifb: Keep track of hardware path of graphics card parisc/stifb: Implement fb_is_primary_device() parisc: fix a crash with multicore scheduler
-