The firmware will return the baid for BA session in the
ADD_STA command response.
This requires masking the check of the status, which is
actually only 8 bits, and not the whole 32 bits.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Print a debug message in iwl_mvm_config_scan() if a scan configuration
data is decided not to be sent to FW.
Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Make the code clearer.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

For debug purposes, allow setting minimum quota (for a single
virtual interface) from debugfs. This is an absolute minimum,
so it can only be set up to 95%.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

To be able to test low-latency behaviour properly, split the
different low-latency sources so that setting any one of them,
for example from debugfs, is sufficient; this avoids getting
the debug setting overwritten by other sources.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Currently firmware is configured to filter out beacons. In case
a beacon was changed - it is waking the host.
However, some vendors change their IEs frequently without any
significant change, and redundant wakeups are triggered as a
result.
As a solution disable beacon filtering when entering d0i3.
Instead, firmware will store the latest beacon and upon exiting
d0i3 it will send it up to the host, so the host can act upon
changes (if there were any).
This beacon will arrive as a dedicated notification - support it
as well.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The driver should support also negative temperatures.
So there is a need to separate between the return value and
temperature in order to be able to distinguish between
a negative temperature and error value.
Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Using kstrtouint() with a signed int isn't really right,
use kstrotoint() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The outer scope has a perfectly suitable 'i' variable,
use it instead of adding a shadowing one in the inner
scope.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Slow platforms may have issues with dumping data upon
firmware assert. Make it easier to disable it for those
platform.
Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Enable snoozing and U-APSD on P2P client. The firwmare will
support this only if the BSS vif is not associated.
Make this configurable by a constant variable and disable
it by default.
Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This will allow to collect the data when the firmware
sends a specific tx response status.
Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This patch documents two missing module options in the internal
code comment block.
Signed-off-by: Rodrigo Freire <rfreire@redhat.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

In order to have the LED being OFF constantly when the
brightness is set to 0, we need to pass IWL_LED_SOLID to
iwl_led_cmd as the off parameter, otherwise the led will
stay on constantly.

This fixes
https://bugzilla.kernel.org/show_bug.cgi?id=110551Signed-off-by: Hubert Tarasiuk <hubert.tarasiuk@gmail.com>
[reworked the commit message]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

No need to include net/ip6_checksum.h twice.
Remove TODOs.
Remove trailing space.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Currently when the driver is configured with wowlan parameters, and enters
D3 mode, the driver switches the FW image to D3, and when it exists
suspend, it reloads the D0 image.

If the firmware supports the consolidation of the D0 & D3 images there is
no need to load the D3 image on suspend, and no need to reload the D0
image on resume.

Do not switch images on suspend / resume, for firmwares that support
consolidated images.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Enable runtime power management (RTPM) for PCIe devices and implement
the corresponding functions to enable D0i3 mode when the device is
idle.

Additionally, remove some unnecessary #ifdef's because the RTPM code
will not be called if runtime PM is not configured.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Add an initial implementation of runtime power management (RTPM) for
PCI devices.  With this patch, RTPM is only used when wifi is off
(i.e. the wifi interface is down).  This implementation is behind a
new Kconfig flag, IWLWIFI_PCIE_RTPM.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The 9000 series introduces several changes in the device
DMA operation.
As the device now supports multi-queue rx, several DMA channels
should be configured.
The flows of providing the device with the allocated RBDs now
changes as well - the device maintains a separate table of used
and free table.

The hardware may use the free table to feed RBDs to any queue.
This requires maintaing a shared table to map returned RBDs to
the original RXB - for that purpose the VID is introduced - an
internal identifier of the RB placed in the lower 12 bits and
returned by HW in the used data.

Another change is the support of 64 bit DMA address.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The 9000 series devices will support multi rx queues.
Current code has one static rx queue - change it to allocate
a number of queues per the device capability (pre-9000 devices
have the number of rx queues set to one).

Subsequent generalizations are:

Change the code to access an explicit numbered rx queue only
when the queue number is known - when handling interrupt, when
accessing the default queue and when iterating the queues.
The rest of the functions will receive the rx queue as a pointer.

Generalize the warning in allocation failure to consider the
allocator status instead of a single rx queue status.

Move the rx initial pool of memory buffers to be shared among
all the queues and allocated to the default queue on init.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

When the Tx queues are full above a threshold, we
immediately stop the mac80211's queue to stop getting new
packets. This worked until TSO was enabled.
With TSO, one single packet from mac80211 can use many
descriptors since a large send needs to be split into
several segments.
This means that stopping mac80211's queues is not enough
and we also need to ensure that we don't overflow the Tx
queues with one single packet from mac80211.
Add code to transport layer to do just that. Stop
mac80211's queue as soon as the queue is full above the
same threshold as before, and keep pushing the current
packet along with its segments on the queue, but check
that we don't overflow. If that would happen, buffer the
segments, and send them when there is room in the Tx queue
again. Of course, we first need to send the buffered
segments and only then, wake up mac80211's queues.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

Pull crypto update from Herbert Xu:
 "Algorithms:
   - Add RSA padding algorithm

  Drivers:
   - Add GCM mode support to atmel
   - Add atmel support for SAMA5D2 devices
   - Add cipher modes to talitos
   - Add rockchip driver for rk3288
   - Add qat support for C3XXX and C62X"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (103 commits)
  crypto: hifn_795x, picoxcell - use ablkcipher_request_cast
  crypto: qat - fix SKU definiftion for c3xxx dev
  crypto: qat - Fix random config build issue
  crypto: ccp - use to_pci_dev and to_platform_device
  crypto: qat - Rename dh895xcc mmp firmware
  crypto: 842 - remove WARN inside printk
  crypto: atmel-aes - add debug facilities to monitor register accesses.
  crypto: atmel-aes - add support to GCM mode
  crypto: atmel-aes - change the DMA threshold
  crypto: atmel-aes - fix the counter overflow in CTR mode
  crypto: atmel-aes - fix atmel-ctr-aes driver for RFC 3686
  crypto: atmel-aes - create sections to regroup functions by usage
  crypto: atmel-aes - fix typo and indentation
  crypto: atmel-aes - use SIZE_IN_WORDS() helper macro
  crypto: atmel-aes - improve performances of data transfer
  crypto: atmel-aes - fix atmel_aes_remove()
  crypto: atmel-aes - remove useless AES_FLAGS_DMA flag
  crypto: atmel-aes - reduce latency of DMA completion
  crypto: atmel-aes - remove unused 'err' member of struct atmel_aes_dev
  crypto: atmel-aes - rework crypto request completion
  ...

Pull UBI/UBIFS updates from Richard Weinberger:
 "This contains three changes - two cleanups and one UBI wear leveling
  improvement by Sebastian Siewior"

* tag 'upstream-4.5-rc1' of git://git.infradead.org/linux-ubifs:
  ubifs: Use XATTR_*_PREFIX_LEN
  UBIFS: add a comment in key.h for unused parameter
  mtd: ubi: wl: avoid erasing a PEB which is empty

Pull configfs updates from Christoph Hellwig:
 "I'm assisting Joel as co-maintainer and patch monkey now, and you will
  see pull reuquests from me for a while.

  Besides the MAINTAINERS update there is just a single change, which
  adds support for binary attributes to configfs, which are very similar
  to the sysfs binary attributes.  Thanks to Pantelis Antoniou!

  You will see another actually bigger set of configfs changes in the
  SCSI target pull from Nic - those were merged before this new tree
  even existed"

* tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs:
  configfs: add myself as co-maintainer, updated git tree
  configfs: implement binary attributes

Pull GFS2 updates from Bob Peterson:
 "Here is a list of patches we've accumulated for GFS2 for the current
  upstream merge window.  Last window's set was short, but I warned that
  this one would be bigger, and so it is.  We've got 19 patches:

   - A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that
     newly added journals don't get flagged, deleted, and recreated by
     fsck.gfs2.

   - Two patches from Andreas Gruenbacher to improve GFS2 performance
     where extended attributes are involved.

   - A patch from Andy Price to fix a suspicious rcu dereference error.

   - Two patches from Ben Marzinski that rework how GFS2's NFS cookies
     are managed.  This fixes readdir problems with nfs-over-gfs2.

   - A patch from Ben Marzinski that fixes a race in unmounting GFS2.

   - A set of four patches from me to move the resource group
     reservations inside the gfs2 inode to improve performance and fix a
     bug whereby get_write_access improperly prevented some operations
     like chown.

   - A patch from me to spinlock-protect the setting of system statfs
     file data.  This was causing small discrepancies between df and du.

   - A patch from me to reintroduce a timeout while clearing glocks
     which was accidentally dropped some time ago.

   - A patch from me to wait for iopen glock dequeues in order to
     improve deleting of files that were unlinked from a different
     cluster node.

   - A patch from me to ensure metadata address spaces get truncated
     when an inode is evicted.

   - A patch from me to fix a bug in which a memory leak could occur in
     some error cases when inodes were trying to be created.

   - A patch to consistently use iopen glocks to transition from the
     unlinked state to the deleted state.

   - A patch to fix a glock reference count error when inode creation
     fails.

   - A patch from Junxiao Bi to fix an flock panic.

   - A patch from Markus Elfring that removes an unnecessary if"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: fix flock panic issue
  GFS2: Don't do glock put on when inode creation fails
  GFS2: Always use iopen glock for gl_deletes
  GFS2: Release iopen glock in gfs2_create_inode error cases
  GFS2: Truncate address space mapping when deleting an inode
  GFS2: Wait for iopen glock dequeues
  gfs2: clear journal live bit in	gfs2_log_flush
  gfs2: change gfs2 readdir cookie
  gfs2: keep offset when splitting dir leaf blocks
  GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear
  GFS2: Update master statfs buffer with sd_statfs_spin locked
  GFS2: Reduce size of incore inode
  GFS2: Make rgrp reservations part of the gfs2_inode structure
  GFS2: Extract quota data from reservations structure (revert 5407e242)
  gfs2: Extended attribute readahead optimization
  gfs2: Extended attribute readahead
  GFS2: Use rht_for_each_entry_rcu in glock_hash_walk
  GFS2: Delete an unnecessary check before the function call "iput"
  gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files

Pull misc vfs updates from Al Viro:
 "All kinds of stuff.  That probably should've been 5 or 6 separate
  branches, but by the time I'd realized how large and mixed that bag
  had become it had been too close to -final to play with rebasing.

  Some fs/namei.c cleanups there, memdup_user_nul() introduction and
  switching open-coded instances, burying long-dead code, whack-a-mole
  of various kinds, several new helpers for ->llseek(), assorted
  cleanups and fixes from various people, etc.

  One piece probably deserves special mention - Neil's
  lookup_one_len_unlocked().  Similar to lookup_one_len(), but gets
  called without ->i_mutex and tries to avoid ever taking it.  That, of
  course, means that it's not useful for any directory modifications,
  but things like getting inode attributes in nfds readdirplus are fine
  with that.  I really should've asked for moratorium on lookup-related
  changes this cycle, but since I hadn't done that early enough...  I
  *am* asking for that for the coming cycle, though - I'm going to try
  and get conversion of i_mutex to rwsem with ->lookup() done under lock
  taken shared.

  There will be a patch closer to the end of the window, along the lines
  of the one Linus had posted last May - mechanical conversion of
  ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
  inode_is_locked()/inode_lock_nested().  To quote Linus back then:

    -----
    |    This is an automated patch using
    |
    |        sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
    |        sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
    |        sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[     ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
    |        sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
    |        sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
    |
    |    with a very few manual fixups
    -----

  I'm going to send that once the ->i_mutex-affecting stuff in -next
  gets mostly merged (or when Linus says he's about to stop taking
  merges)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  nfsd: don't hold i_mutex over userspace upcalls
  fs:affs:Replace time_t with time64_t
  fs/9p: use fscache mutex rather than spinlock
  proc: add a reschedule point in proc_readfd_common()
  logfs: constify logfs_block_ops structures
  fcntl: allow to set O_DIRECT flag on pipe
  fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
  fs: xattr: Use kvfree()
  [s390] page_to_phys() always returns a multiple of PAGE_SIZE
  nbd: use ->compat_ioctl()
  fs: use block_device name vsprintf helper
  lib/vsprintf: add %*pg format specifier
  fs: use gendisk->disk_name where possible
  poll: plug an unused argument to do_poll
  amdkfd: don't open-code memdup_user()
  cdrom: don't open-code memdup_user()
  rsxx: don't open-code memdup_user()
  mtip32xx: don't open-code memdup_user()
  [um] mconsole: don't open-code memdup_user_nul()
  [um] hostaudio: don't open-code memdup_user()
  ...

Pull iov_iter infrastructure updates from Al Viro:
 "A couple of iov_iter updates"

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: export import_single_range()
  iov_iter: constify {csum_and_,}copy_to_iter()

Pull vfs copy_file_range updates from Al Viro:
 "Several series around copy_file_range/CLONE"

* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: use new dedupe data function pointer
  vfs: hoist the btrfs deduplication ioctl to the vfs
  vfs: wire up compat ioctl for CLONE/CLONE_RANGE
  cifs: avoid unused variable and label
  nfsd: implement the NFSv4.2 CLONE operation
  nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
  vfs: pull btrfs clone API to vfs layer
  locks: new locks_mandatory_area calling convention
  vfs: Add vfs_copy_file_range() support for pagecache copies
  btrfs: add .copy_file_range file operation
  x86: add sys_copy_file_range to syscall tables
  vfs: add copy_file_range syscall and vfs helper

Pull file locking updates from Jeff Layton:
 "File locking related changes for v4.5 (pile #1)

  Highlights:
   - new Kconfig option to allow disabling mandatory locking (which is
     racy anyway)
   - new tracepoints for setlk and close codepaths
   - fix for a long-standing bug in code that handles races between
     setting a POSIX lock and close()"

* tag 'locks-v4.5-1' of git://git.samba.org/jlayton/linux:
  locks: rename __posix_lock_file to posix_lock_inode
  locks: prink more detail when there are leaked locks
  locks: pass inode pointer to locks_free_lock_context
  locks: sprinkle some tracepoints around the file locking code
  locks: don't check for race with close when setting OFD lock
  locks: fix unlock when fcntl_setlk races with a close
  fs: make locks.c explicitly non-modular
  locks: use list_first_entry_or_null()
  locks: Don't allow mounts in user namespaces to enable mandatory locking
  locks: Allow disabling mandatory locking at compile time

Newly added code in the bnxt driver uses a couple of variables that
are never initialized when CONFIG_BNXT_SRIOV is not set, and gcc
correctly warns about that:

In file included from include/linux/list.h:8:0,
                 from include/linux/module.h:9,
                 from drivers/net/ethernet/broadcom/bnxt/bnxt.c:10:
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_get_max_rings':
include/linux/kernel.h:794:26: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized]
include/linux/kernel.h:794:26: warning: 'tx' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/ethernet/broadcom/bnxt/bnxt.c:5730:11: warning: 'rx' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/ethernet/broadcom/bnxt/bnxt.c:5736:6: note: 'rx' was declared here

This changes the condition so that we fall back to using the PF
data if VF is not available, and always initialize the variables
to something useful.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 6e6c5a57 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.")
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a
constant shift that can't be encoded in the immediate field of the
UBFM/SBFM instructions is passed to the JIT.  Since these shifts
amounts, which are negative or >= regsize, are invalid, reject them in
the eBPF verifier and the classic BPF filter checker, for all
architectures.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull UML updates from Richard Weinberger:
 "This contains beside of random fixes/cleanups two bigger changes:

   - seccomp support by Mickaël Salaün

   - IRQ rework by Anton Ivanov"

* 'for-linus-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Use race-free temporary file creation
  um: Do not set unsecure permission for temporary file
  um: Fix build error and kconfig for i386
  um: Add seccomp support
  um: Add full asm/syscall.h support
  selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOK
  um: Fix ptrace GETREGS/SETREGS bugs
  um: link with -lpthread
  um: Update UBD to use pread/pwrite family of functions
  um: Do not change hard IRQ flags in soft IRQ processing
  um: Prevent IRQ handler reentrancy
  uml: flush stdout before forking
  uml: fix hostfs mknod()

Pull KVM updates from Paolo Bonzini:
 "PPC changes will come next week.

   - s390: Support for runtime instrumentation within guests, support of
     248 VCPUs.

   - ARM: rewrite of the arm64 world switch in C, support for 16-bit VM
     identifiers.  Performance counter virtualization missed the boat.

   - x86: Support for more Hyper-V features (synthetic interrupt
     controller), MMU cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits)
  kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
  kvm/x86: Hyper-V SynIC timers tracepoints
  kvm/x86: Hyper-V SynIC tracepoints
  kvm/x86: Update SynIC timers on guest entry only
  kvm/x86: Skip SynIC vector check for QEMU side
  kvm/x86: Hyper-V fix SynIC timer disabling condition
  kvm/x86: Reorg stimer_expiration() to better control timer restart
  kvm/x86: Hyper-V unify stimer_start() and stimer_restart()
  kvm/x86: Drop stimer_stop() function
  kvm/x86: Hyper-V timers fix incorrect logical operation
  KVM: move architecture-dependent requests to arch/
  KVM: renumber vcpu->request bits
  KVM: document which architecture uses each request bit
  KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests
  kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock
  KVM: s390: implement the RI support of guest
  kvm/s390: drop unpaired smp_mb
  kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa
  KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table()
  arm/arm64: KVM: Detect vGIC presence at runtime
  ...

Pull xen updates from David Vrabel:
 "Xen features and fixes for 4.5-rc0:

   - Stolen ticks and PV wallclock support for arm/arm64

   - Add grant copy ioctl to gntdev device"

* tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: add ioctl for grant copy
  x86/xen: don't reset vcpu_info on a cancelled suspend
  xen/gntdev: constify mmu_notifier_ops structures
  xen/grant-table: constify gnttab_ops structure
  xen/time: use READ_ONCE
  xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify
  xen/x86: support XENPF_settime64
  xen/arm: set the system time in Xen via the XENPF_settime64 hypercall
  xen/arm: introduce xen_read_wallclock
  arm: extend pvclock_wall_clock with sec_hi
  xen: introduce XENPF_settime64
  xen/arm: introduce HYPERVISOR_platform_op on arm and arm64
  xen: rename dom0_op to platform_op
  xen/arm: account for stolen ticks
  arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
  arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
  missing include asm/paravirt.h in cputime.c
  xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c

Pull tiny c6x update from Mark Salter.

* 'for-linux-next' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  c6x: Use generic clkdev.h header

Pull component updates from Russell King:
 "Updates for the component helper merged last year.

  This update removes the old add_components method of detecting and
  looking up the components associated with a master device.  Last time
  I checked during the 4.4-rc cycle, there were no users of the old
  interfaces, as has been the case for some time now.  Breakage due to
  conflicting development is possible, in which case this pull will have
  to be reverted - however, these changes have been in linux-next since
  Dec 7th without any problems reported.

  Removal of that then allows us to change the way we track components
  internally, allowing us to release data that has been used for
  matching at the appropriate time, thereby allowing any resource leaks
  caused by that missing functionality to be resolved"

* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  component: add support for releasing match data
  component: track components via array rather than list
  component: move check for unbound master into try_to_bring_up_masters()
  component: remove old add_components method

Pull ARM updates from Russell King:

 - UEFI boot and runtime services support for ARM from Ard Biesheuvel
   and Roy Franz.

 - DT compatibility with old atags booting protocol for Nokia N900
   devices from Ivaylo Dimitrov.

 - PSCI firmware interface using new arm-smc calling convention from
   Jens Wiklander.

 - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
   support these instructions from Nicolas Pitre.

 - L2x0 cache updates from Dirk B and Linus Walleij.

 - Randconfig fixes from Arnd Bergmann.

 - ARMv7M (nommu) updates from Ezequiel Garcia

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
  ARM: 8481/2: drivers: psci: replace psci firmware calls
  ARM: 8480/2: arm64: add implementation for arm-smccc
  ARM: 8479/2: add implementation for arm-smccc
  ARM: 8478/2: arm/arm64: add arm-smccc
  ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
  ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
  ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
  ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
  ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
  ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
  ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
  ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
  ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
  ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
  ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
  ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
  ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
  ARM: add UEFI stub support
  ARM: wire up UEFI init and runtime support
  ARM: only consider memblocks with NOMAP cleared for linear mapping
  ...

Pull arm[64] perf updates from Will Deacon:
 "In the past, I have funnelled perf updates through the respective
  architecture trees, but now that the arm/arm64 perf driver has been
  largely consolidated under drivers/perf/, it makes more sense to send
  a separate pull, particularly as I'm listed as maintainer for all the
  files involved.  I offered the branch to arm-soc, but Arnd suggested
  that I just send it to you directly.

  So, here is the arm/arm64 perf queue for 4.5.  The main features are
  described below, but the most useful change is from Drew, which
  advertises our architected event mapping in sysfs so that the perf
  tool is a lot more user friendly and no longer requires the use of
  magic hex constants for profiling common events.

   - Support for the CPU PMU in Cortex-A72

   - Add sysfs entries to describe the architected events and their
     mappings for PMUv{1-3}"

* tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: add support for Cortex-A72
  arm64: perf: add format entry to describe event -> config mapping
  ARM: perf: add format entry to describe event -> config mapping
  arm64: kernel: enforce pmuserenr_el0 initialization and restore
  arm64: perf: Correct Cortex-A53/A57 compatible values
  arm64: perf: Add event descriptions
  arm64: perf: Convert event enums to #defines
  arm: perf: Add event descriptions
  arm: perf: Convert event enums to #defines
  drivers/perf: kill armpmu_register

Pull arm64 updates from Will Deacon:
 "Here is the core arm64 queue for 4.5.  As you might expect, the
  Christmas break resulted in a number of patches not making the final
  cut, so 4.6 is likely to be larger than usual.  There's still some
  useful stuff here, however, and it's detailed below.

  The EFI changes have been Reviewed-by Matt and the memblock change got
  an "OK" from akpm.

  Summary:

   - Support for a separate IRQ stack, although we haven't reduced the
     size of our thread stack just yet since we don't have enough data
     to determine a safe value

   - Refactoring of our EFI initialisation and runtime code into
     drivers/firmware/efi/ so that it can be reused by arch/arm/.

   - Ftrace improvements when unwinding in the function graph tracer

   - Document our silicon errata handling process

   - Cache flushing optimisation when mapping executable pages

   - Support for hugetlb mappings using the contiguous hint in the pte"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (45 commits)
  arm64: head.S: use memset to clear BSS
  efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
  arm64: entry: remove pointless SPSR mode check
  arm64: mm: move pgd_cache initialisation to pgtable_cache_init
  arm64: module: avoid undefined shift behavior in reloc_data()
  arm64: module: fix relocation of movz instruction with negative immediate
  arm64: traps: address fallout from printk -> pr_* conversion
  arm64: ftrace: fix a stack tracer's output under function graph tracer
  arm64: pass a task parameter to unwind_frame()
  arm64: ftrace: modify a stack frame in a safe way
  arm64: remove irq_count and do_softirq_own_stack()
  arm64: hugetlb: add support for PTE contiguous bit
  arm64: Use PoU cache instr for I/D coherency
  arm64: Defer dcache flush in __cpu_copy_user_page
  arm64: reduce stack use in irq_handler
  arm64: mm: ensure that the zero page is visible to the page table walker
  arm64: Documentation: add list of software workarounds for errata
  arm64: mm: place __cpu_setup in .text
  arm64: cmpxchg: Don't incldue linux/mmdebug.h
  arm64: mm: fold alternatives into .init
  ...