- 08 Jul, 2015 8 commits
-
-
Arun Siluvery authored
wa_ctx_emit() depends on the name of a local variable; if the name of that variable is changed then we get compile errors. In this case it is unlikely to be changed as this macro is only used in this set of functions but Kernel coding guidelines doesn't recommend doing this. It was my mistake as I should have corrected it at the beginning but missed so correct this before there are more usages of this macro (Bob Beckett). https://www.kernel.org/doc/Documentation/CodingStyle, Chapter 12, "Things to avoid when using macros", point 2): " 2) macros that depend on having a local variable with a magic name: #define FOO(val) bar(index, val) might look like a good thing, but it's confusing as hell when one reads the code and it's prone to breakage from seemingly innocent changes. " v2: Optimization to avoid multiple evaluation of 'index' in the macro. Since we invoke it multiple times, compiler, if it can, should be able to coalesce them into a single condition and remove multiple WARN_ON checks (Chris). Suggested-by:
Robert Beckett <robert.beckett@intel.com> Cc: Robert Beckett <robert.beckett@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Sonika Jindal authored
Writing to PCH_PORT_HOTPLUG for each interrupt is not required. Handle it only if hpd has actually occurred like we handle other interrupts. v2: Make few variables local to if block (Ville) v3: Add check for ibx/cpt both (Ville). While at it, remove the redundant check for hotplug_trigger from pch_get_hpd_pins v4: Indentation (Ville) Reviewed-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Signed-off-by:
-
Paulo Zanoni authored
So now all the calls are inside __intel_fbc_update(). Consistency! Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
I have two separate refactor ideas that require extracting this to a separate function. I'm not sure which idea I'll end choosing, but since both will require extracting this function, let's do this now. Notice that this is just code moving. Any possible problems with the current multiple pipes check should be fixed in later commits. Signed-off-by:
-
Paulo Zanoni authored
The poor in_dbg_master() check was the only one without a reason string. Give it a reason string so it won't feel excluded. Signed-off-by:
-
Paulo Zanoni authored
This is all internal i915.ko work, let's start using intel_crtc for everything. Signed-off-by:
-
Paulo Zanoni authored
Because the cool kids use dev_priv and FBC wants to be cool too. We've been historically using struct drm_device on the FBC function arguments, but we only really need it for intel_vgpu_active(): we can use dev_priv everywhere else. So let's fully switch to dev_priv since I'm getting tired of adding "struct drm_device *dev = dev_priv->dev" everywhere. If I get a NACK here I'll propose the opposite: convert all the functions that currently take dev_priv to take dev. Signed-off-by:
-
Paulo Zanoni authored
Because it makes more sense there, IMHO. Signed-off-by:
-
- 07 Jul, 2015 3 commits
-
-
Daniel Vetter authored
After the register save/restore code is gone there's just one user left and it just obfuscates that one. Remove it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Daniel Vetter authored
Burning cpu cycles isn't awesome, so use sleeps instead. Signed-off-by:
-
Daniel Vetter authored
Since that's really what we want to test for. Note remove the gen5 case doesn't change anything: In intel_setup_outputs ilk is handled already in the HAS_PCH_SPLIT case, and the register save/restore code touches registers which simply doesn't exist anymore at all. v2: Drop UMS parts. v3: Update commit message to reflect that the reg save/restore code is gone (Ville). Reviewed-by:
-
- 06 Jul, 2015 29 commits
-
-
Ville Syrjälä authored
Follow the correct pipe vs port disable sequence for the PCH LVDS ports, ie. disable the port after the pipe. Other PCH port were already converted in the following commits: 1ea56e26 drm/i915: Disable CRT port after pipe on PCH platforms 3c65d1d1 drm/i915: Disable SDVO port after the pipe on PCH platforms a4790cec drm/i915: Disable HDMI port after the pipe on PCH platforms 08aff3fe drm/i915: Move DP port disable to post_disable for pch platforms but LVDS was forgotten. Signed-off-by:
-
Matt Roper authored
intel_atomic_setup_scalers() dereferences 'plane' before the plane has been assigned. The plane ID assignment doing this dereference is only needed for debugging messages later in the function, so just move the assignment farther down the function to a point where plane will no longer be NULL. This was introduced in: commit 133b0d12 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jun 15 12:33:39 2015 +0200 drm/i915: Clean up intel_atomic_setup_scalers slightly. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Reported-by:Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Mika Kuoppala authored
Now when we have requests this deep on call chain, we can mark the elsp being submitted when it actually is. Remove temp variable and readjust commenting to more closely fit to the code. v2: Avoid tmp variable and reduce number of writes (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Pass around requests to carry context deeper in callchain. Signed-off-by:
-
Mika Kuoppala authored
Pass around requests to carry context deeper in callchain. Signed-off-by:
-
Mika Kuoppala authored
Pass around requests to carry context deeper in callchain. Signed-off-by:
-
Mika Kuoppala authored
In preparation to make intel_lr_context_pin|unpin to accept requests, assign ringbuf into request before we call the pinning. v2: No need to unset ringbuf on error path (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
Pass around requests to carry context deeper in callchain. Signed-off-by:
-
Mika Kuoppala authored
Pass around requests to carry context deeper in callchain. Signed-off-by:
-
Niu,Bing authored
It is found that i915 will not reset gpu under execlist mode when unload module. that will lead to some issues when unload/load module with different submission mode. e.g. from execlist mode to ring buffer mode via loading/unloading i915. Because HW is not in a reset state and registers are not clean under such condition. Signed-off-by:
Niu,Bing <bing.niu@intel.com> Reviewed-by:
-
Arun Siluvery authored
In this WA we need to set GEN8_L3SQCREG4[21:21] and reset it after PIPE_CONTROL instruction but there is a slight complication as this is applied in WA batch where the values are only initialized once. Dave identified an issue with the current implementation where the register value is read once at the beginning and it is reused; this patch corrects this by saving the register value to memory, update register with the bit of our interest and restore it back with original value. This implementation uses MI_LOAD_REGISTER_MEM which is currently only used by command parser and was using a default length of 0. This is now updated with correct length and moved to appropriate place. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
-
Paulo Zanoni authored
Now all the functions called by other files check whether FBC has been initialized. This allows us to drop the checks on the static functions. v2: - s/HAS_FBC/dev_priv->display.enable_fbc/ everywhere but the init function (Chris). Suggested-by:
-
Paulo Zanoni authored
Everything is covered either by fbc.lock or mm.stolen_lock, and intel_fbc.c is already responsible for grabbing the appropriate locks when it needs them. Reviewed-by:
-
Paulo Zanoni authored
So don't grab the lock before calling the function. Reviewed-by:
-
Paulo Zanoni authored
So release the lock earlier. Reviewed-by:
-
Paulo Zanoni authored
Make sure we're not going to have weird races in really weird cases where a lot of different CRTCs are doing rendering and modesets at the same time. With this change and the stolen_lock from the previous patch, we can start removing the struct_mutex locking we have around FBC in the next patches. v2: - Rebase (6 months later) - Also lock debugfs and stolen. v3: - Don't lock a single value read (Chris). - Replace lockdep assertions with WARNs (Daniel). - Improve commit message. - Don't forget intel_pre_plane_update() locking. v4: - Don't remove struct_mutex at intel_pre_plane_update() (Chris). - Add comment regarding locking dependencies (Chris). - Rebase after the stolen code rework. - Rebase again after drm-intel-nightly changes. v5: - Rebase after the new stolen_lock patch. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4) Signed-off-by:
-
Paulo Zanoni authored
Which should protect dev_priv->mm.stolen usage. This will allow us to simplify the relationship between stolen memory, FBC and struct_mutex. v2: - Rebase after the stolen_remove_node() dev_priv patch move. - I realized that after we fixed a few things related to the FBC CFB size checks, we're not reallocating the CFB anymore with FBC enabled, so we can just move all the locking to i915_gem_stolen.c and stop worrying about freezing all the stolen alocations while freeing/rellocating the CFB. This allows us to fix the "Too coarse" observation from Chris. Suggested-by: -
Paulo Zanoni authored
With the abstractions created by the last patch, we can move this code and the only thing inside intel_fbc.c that knows about dev_priv->mm is the code that reads stolen_base. We also had to move a call to i915_gem_stolen_cleanup_compression() - now called intel_fbc_cleanup_cfb() - outside i915_gem_stolen.c. v2: - Rebase after the remove_node() changes on the previous patch. Requested-by:
-
Paulo Zanoni authored
We want to move the FBC code out of i915_gem_stolen.c, but that code directly adds/removes stolen memory nodes. Let's create this abstraction, so i915_gme_stolen.c is still in control of all the stolen memory handling. The abstraction will also allow us to add locking assertions later. v2: - Add dev_priv as remove_node() argument since we'll need it later (Chris). Requested-by: -
Ville Syrjälä authored
Kill the extra intel_pre_plane_update() I accidentally added in commit 852eb00d Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jun 24 22:00:07 2015 +0300 drm/i915: Try to make sure cxsr is disabled around plane enable/disable This fixes a load of warnings from the frontbuffer tracking. Testcase: igt/kms_frontbuffer_tracking/fbc-1p-rte Tested-by:
-
Jani Nikula authored
Adding support for did2, or the extended support display devices ID list, increases the total to 15. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Jani Nikula authored
Make it easier to handle the extended didl. No functional changes. Signed-off-by:
-
Jani Nikula authored
Conform to same style as the rest of the driver. Signed-off-by:
-
Jani Nikula authored
Inluding extended didl and cpdl fields Present since opregion version 3.0. Signed-off-by:
-
Jani Nikula authored
Signed-off-by:
-
Jani Nikula authored
Add an overview of the drm/i915 hotplug handling. Signed-off-by:
-
Jani Nikula authored
Clarify that audio enable/disable sequences are part of the modeset sequence. Signed-off-by:
-
Paulo Zanoni authored
drivers/gpu/drm/i915/intel_ddi.c: In function ‘intel_prepare_ddi’: drivers/gpu/drm/i915/intel_ddi.c:517:6: warning: ‘ddi_translations_fdi’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (ddi_translations_fdi) ^ drivers/gpu/drm/i915/intel_ddi.c:446:30: note: ‘ddi_translations_fdi’ was declared here const struct ddi_buf_trans *ddi_translations_fdi; ^ This line used to be there, but was removed by: commit f8896f5d Author: David Weinehall <david.weinehall@linux.intel.com> Date: Thu Jun 25 11:11:03 2015 +030 drm/i915/skl: Buffer translation improvements Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: -
Abdiel Janulgue authored
Ensures that the batch buffer is executed by the resource streamer. And will let userspace know whether Resource Streamer is supported in the kernel. v2: Don't skip 1<<15 for the exec flags (Jani Nikula) v3: Use HAS_RESOURCE_STREAMER macro for execbuf validation (Chris Wilson) (from getparam patch) v2: Update I915_PARAM_HAS_RESOURCE_STREAMER so it's after I915_PARAM_HAS_GPU_RESET. v3: Only advertise RS support for hardware that supports it. v4: Add HAS_RESOURCE_STREAMER() macro (Chris) Testcase: igt/gem_exec_params Cc: Jani Nikula <jani.nikula@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:Abdiel Janulgue <abdiel.janulgue@linux.intel.com> [danvet: squash in getparam patch since it'd break bisect, suggested by Chris.] Signed-off-by:
-
