- 29 Sep, 2022 1 commit
-
-
Chunfeng Yun authored
Change the inline function mtk_phy_update_field() into a macro to avoid check warning of FIELD_PREP() with compiler parameter -Wtautological-constant-out-of-range-compare the warning is caused by mask check: "BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \" Fixes: 29c07477 ("phy: mediatek: add a new helper to update bitfield") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220928070746.5393-1-chunfeng.yun@mediatek.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
- 24 Sep, 2022 39 commits
-
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
Yuan Can <yuancan@huawei.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20220924070300.25080-5-yuancan@huawei.comSigned-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Dongliang Mu authored
Smatch reports the following error: drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines: 58. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on lines: 58. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines: 58. Fix this by calling proper clk_disable_unprepare calls. Fixes: 0b56e9a7 ("phy: Group vendor specific phy drivers") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Yuan Can authored
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by:
-
Dan Carpenter authored
These two error paths need to call of_node_put(child_node) before returning. Fixes: edd473d4 ("phy: ti: phy-j721e-wiz: add support for j7200-wiz-10g") Fixes: 7ae14cf5 ("phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/YyxFI8aW23IC/21U@kiliSigned-off-by:
-
Chunfeng Yun authored
Remove private register access helpers, use the common ones instead. Signed-off-by:
-
Chunfeng Yun authored
Use MediaTek phy's common helper to access registers, then we can remove mipi-dsi's I/O helpers. Signed-off-by:
-
Chunfeng Yun authored
Use GENMASK() macro to generate bits mask Signed-off-by:
-
Chunfeng Yun authored
Use MediaTek phy's common helper to access registers, then we can remove mipi-dsi's I/O helpers. Signed-off-by:
-
Chunfeng Yun authored
Use FIELD_PREP() macro to prepare bits field value, then no need define macros of bits offset. Signed-off-by:
-
Chunfeng Yun authored
Use GENMASK() macro to generate bits mask Signed-off-by:
-
Chunfeng Yun authored
Remove private register access helpers, use the common ones instead. Signed-off-by:
-
Chunfeng Yun authored
Use MediaTek phy's common helper to access registers, then we can remove hdmi's I/O helpers. Signed-off-by:
-
Chunfeng Yun authored
Use FIELD_PREP() macro to prepare bits field value, then no need define macros of bits offset. Signed-off-by:
-
Chunfeng Yun authored
Use GENMASK() macro to generate bits mask Signed-off-by:
-
Chunfeng Yun authored
Use MediaTek phy's common helper to access registers, then we can remove hdmi's I/O helpers. Signed-off-by:
-
Chunfeng Yun authored
Use FIELD_PREP() macro to prepare bits field value, then no need define macros of bits offset. Signed-off-by:
-
Chunfeng Yun authored
Use GENMASK() and BIT() macros to generate mask and bits Signed-off-by:
-
Chunfeng Yun authored
The new helper will use FIELD_PREP() macro to prepare bits value according to mask, then we no need do it anymore. Signed-off-by:
-
Chunfeng Yun authored
No need define private register access helpers, use common ones defined in phy-mtk-io.h Signed-off-by:
-
Chunfeng Yun authored
Prefer to make use of FIELD_PREP() macro to prepare bitfield value, then no need local ones anymore. Signed-off-by:
-
Chunfeng Yun authored
Prefer to make use of FIELD_PREP() macro to prepare bitfield value, then no need local ones anymore. Signed-off-by:
-
Chunfeng Yun authored
Due to FIELD_PREP() macro can be used to prepare a bitfield value, local ones can be remove; add the new helper to make bitfield update easier. Signed-off-by:
-
Johan Hovold authored
Drop the DP_COM control block flag from the configuration data, which is set for all combo PHYs and hence no longer needed since the QMP driver split. Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
-
Johan Hovold authored
For legacy reasons, there are two configuration parameters that appear to describe the number of lanes a PHY has, even if "nlanes" was actually used for a different purpose. Replace them both with a new field simply named "lanes". Signed-off-by:
-
Johan Hovold authored
For legacy reasons, there are two configuration parameters that describe the number of lanes a PHY has. Replace them both with a new field simply named "lanes". Signed-off-by:
-
Johan Hovold authored
For legacy reasons, there are two configuration parameters that appear to describe the number of lanes a PHY has, even if "nlanes" was actually used for a different purpose. Replace them both with a new field simply named "lanes". Signed-off-by:
-
Johan Hovold authored
The nlanes configuration parameter is really the number of PHYs provided by this QMP block on MSM8996. Rename it accordingly. Signed-off-by:
-
Johan Hovold authored
For legacy reasons, there are two configuration parameters that describe the number of lanes a PHY has. Replace them both with a new field simply named "lanes". Signed-off-by:
-
Johan Hovold authored
Only the MSM8996 PCIe QMP driver uses the index field so drop it from the other drivers. Signed-off-by:
-
Johan Hovold authored
Drop the unused mask_com_pcs_ready field from struct qmp_phy_cfg. Signed-off-by:
-
Johan Hovold authored
Drop the unused mode field from struct qmp_phy. Signed-off-by:
-
Johan Hovold authored
Drop the removed mode field from the struct qmp_phy kernel doc. Signed-off-by:
-
