- 03 May, 2012 6 commits
-
-
Sasha Levin authored
l2tp_ip_sendmsg could return without releasing socket lock, making it all the way to userspace, and generating the following warning: [ 130.891594] ================================================ [ 130.894569] [ BUG: lock held when returning to user space! ] [ 130.897257] 3.4.0-rc5-next-20120501-sasha #104 Tainted: G W [ 130.900336] ------------------------------------------------ [ 130.902996] trinity/8384 is leaving the kernel with locks still held! [ 130.906106] 1 lock held by trinity/8384: [ 130.907924] #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff82b9503f>] l2tp_ip_sendmsg+0x2f/0x550 Introduced by commit 2f16270f ("l2tp: Fix locking in l2tp_ip.c"). Signed-off-by:Sasha Levin <levinsasha928@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
I just noticed after some recent updates, that the init path for the drop monitor protocol has a minor error. drop monitor maintains a per cpu structure, that gets initalized from a single cpu. Normally this is fine, as the protocol isn't in use yet, but I recently made a change that causes a failed skb allocation to reschedule itself . Given the current code, the implication is that this workqueue reschedule will take place on the wrong cpu. If drop monitor is used early during the boot process, its possible that two cpus will access a single per-cpu structure in parallel, possibly leading to data corruption. This patch fixes the situation, by storing the cpu number that a given instance of this per-cpu data should be accessed from. In the case of a need for a reschedule, the cpu stored in the struct is assigned the rescheule, rather than the currently executing cpu Tested successfully by myself. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: David Miller <davem@davemloft.net> Signed-off-by:
-
tom.leiming@gmail.com authored
If register_netdev returns failure, the dev->interrupt and its transfer buffer should be released, so just fix it. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
tom.leiming@gmail.com authored
The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Joakim Tjernlund authored
Creating a VLAN interface on top of ucc_geth adds 4 bytes to the frame and the HW controller is not prepared to TX a frame bigger than 1518 bytes which is 4 bytes too small for a full VLAN frame. Add 16 bytes which will handle the a simple VLAN and leaves 12 bytes for future expansion. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
-
Joakim Tjernlund authored
In a busy network we see ucc_geth is dropping RX pkgs every now and then. Increase the RX queues HW descriptors from 16 to 32 to deal with this. Signed-off-by:
-
- 01 May, 2012 17 commits
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Eric Dumazet authored
skb_checksum_help(skb) can return an error, we must free skb in this case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if skb_unshare() failed), so lets use this generic helper. Signed-off-by:
-
stephen hemminger authored
Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by:
Mirko Lindner <mlindner@marvell.com> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
stephen hemminger authored
When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by:
-
Eric Dumazet authored
fix kernel doc typos in function names Signed-off-by:
-
Roland Dreier authored
The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28 Call Trace: [<ffffffff8106e767>] register_lock_class+0x108/0x2d0 [<ffffffff8106ff42>] __lock_acquire+0xd3/0xd06 [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe [<ffffffff813862a6>] _raw_spin_lock_irq+0x36/0x45 [<ffffffffa01e71aa>] cxgb_vlan_mode+0x96/0xcb [cxgb3] [<ffffffffa01f90eb>] init_one+0x8c4/0x980 [cxgb3] [<ffffffff811fcbf0>] local_pci_probe+0x3f/0x70 [<ffffffff81042206>] do_work_for_cpu+0x10/0x22 [<ffffffff810482de>] kthread+0xa1/0xa9 [<ffffffff8138e234>] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by:Roland Dreier <roland@purestorage.com> Signed-off-by:
-
-
Yi Zou authored
With the support to bounce buffer added, the skb is coming as nonlinear in the case of non-DDPed data frames for FCoE, which is mostly ok as the FCoE stack would take care of that. However, for target mode, we have to set the FC CRC and FC EOF field to allow the protocol stack to not drop the frame for the last data frame of that sequence. So fix this by linearizing the skb first before doing skb_put(). Signed-off-by:
Yi Zou <yi.zou@intel.com> Tested-by:
Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
The driver was freeing memory in shutdown instead of remove. As a result we were leaking memory if IEEE DCB was enabled and we loaded/unloaded the driver. This change moves the freeing of the memory into the remove routine where it belongs. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Samuel Liao authored
Maybe it's a typo, but it cause that igbvf can't be initialized successfully. Set perm_addr value using valid dev_addr, although which is equal to hw.mac.addr. Signed-off-by:
Samuel Liao <samuelliao@tencent.com> Signed-off-by:
Shan Wei <davidshan@tencent.com> Signed-off-by:
-
Steve Glendinning authored
This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by:
Stephane Fillod <fillods@users.sf.net> Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
Steve Glendinning authored
also explicitly set the phy to advertise 1000 speeds Signed-off-by:
-
Steve Glendinning authored
smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by:
-
Steve Glendinning authored
fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d9460920Signed-off-by:
-
Steve Glendinning authored
Signed-off-by:
-
Steve Glendinning authored
smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by:
-
Steve Glendinning authored
This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by:
-
- 30 Apr, 2012 9 commits
-
-
Felix Fietkau authored
EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations. For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets. Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Yuchung Cheng authored
When the cwnd reduction is done, ssthresh may be infinite if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e., undo_marker is set, tcp_complete_cwr() falsely set cwnd to the infinite ssthresh value. The correct operation is to keep cwnd intact because it has been updated in ECN or F-RTO. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Jan Seiffert authored
Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by:
-
Eric Dumazet authored
Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly provided a lockdep report that explains it all : [ 762.903868] [ 762.903880] ================================= [ 762.903890] [ INFO: inconsistent lock state ] [ 762.903903] 3.3.4-build-0061 #8 Not tainted [ 762.904133] --------------------------------- [ 762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 762.904542] (key#3){+.?...}, at: [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] {IN-SOFTIRQ-W} state was registered at: [ 762.904542] [<c0158b84>] __lock_acquire+0x284/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232c93>] __percpu_counter_add+0x58/0x7c [ 762.904542] [<c02cfde1>] sk_clone_lock+0x1e5/0x200 [ 762.904542] [<c0303ee4>] inet_csk_clone_lock+0xe/0x78 [ 762.904542] [<c0315778>] tcp_create_openreq_child+0x1b/0x404 [ 762.904542] [<c031339c>] tcp_v4_syn_recv_sock+0x32/0x1c1 [ 762.904542] [<c031615a>] tcp_check_req+0x1fd/0x2d7 [ 762.904542] [<c0313f77>] tcp_v4_do_rcv+0xab/0x194 [ 762.904542] [<c03153bb>] tcp_v4_rcv+0x3b3/0x5cc [ 762.904542] [<c02fc0c4>] ip_local_deliver_finish+0x13a/0x1e9 [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc652>] ip_local_deliver+0x41/0x45 [ 762.904542] [<c02fc4d1>] ip_rcv_finish+0x31a/0x33c [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc857>] ip_rcv+0x201/0x23e [ 762.904542] [<c02daa3a>] __netif_receive_skb+0x319/0x368 [ 762.904542] [<c02dac07>] netif_receive_skb+0x4e/0x7d [ 762.904542] [<c02dacf6>] napi_skb_finish+0x1e/0x34 [ 762.904542] [<c02db122>] napi_gro_receive+0x20/0x24 [ 762.904542] [<f85d1743>] e1000_receive_skb+0x3f/0x45 [e1000e] [ 762.904542] [<f85d3464>] e1000_clean_rx_irq+0x1f9/0x284 [e1000e] [ 762.904542] [<f85d3926>] e1000_clean+0x62/0x1f4 [e1000e] [ 762.904542] [<c02db228>] net_rx_action+0x90/0x160 [ 762.904542] [<c012a445>] __do_softirq+0x7b/0x118 [ 762.904542] irq event stamp: 156915469 [ 762.904542] hardirqs last enabled at (156915469): [<c019b4f4>] __slab_alloc.clone.58.clone.63+0xc4/0x2de [ 762.904542] hardirqs last disabled at (156915468): [<c019b452>] __slab_alloc.clone.58.clone.63+0x22/0x2de [ 762.904542] softirqs last enabled at (156915466): [<c02ce677>] lock_sock_nested+0x64/0x6c [ 762.904542] softirqs last disabled at (156915464): [<c0349914>] _raw_spin_lock_bh+0xe/0x45 [ 762.904542] [ 762.904542] other info that might help us debug this: [ 762.904542] Possible unsafe locking scenario: [ 762.904542] [ 762.904542] CPU0 [ 762.904542] ---- [ 762.904542] lock(key#3); [ 762.904542] <Interrupt> [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] *** DEADLOCK *** [ 762.904542] [ 762.904542] 1 lock held by squid/1603: [ 762.904542] #0: (sk_lock-AF_INET){+.+.+.}, at: [<c03055c0>] lock_sock+0xa/0xc [ 762.904542] [ 762.904542] stack backtrace: [ 762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8 [ 762.904542] Call Trace: [ 762.904542] [<c0347b73>] ? printk+0x18/0x1d [ 762.904542] [<c015873a>] valid_state+0x1f6/0x201 [ 762.904542] [<c0158816>] mark_lock+0xd1/0x1bb [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c015805d>] ? check_usage_forwards+0x77/0x77 [ 762.904542] [<c0158bf8>] __lock_acquire+0x2f8/0xc26 [ 762.904542] [<c0159b8e>] ? mark_held_locks+0x5d/0x7b [ 762.904542] [<c0159cf6>] ? trace_hardirqs_on+0xb/0xd [ 762.904542] [<c0158dd4>] ? __lock_acquire+0x4d4/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c02cebc4>] __sk_mem_schedule+0xdd/0x1c7 [ 762.904542] [<c02d178d>] ? __alloc_skb+0x76/0x100 [ 762.904542] [<c0305e8e>] sk_wmem_schedule+0x21/0x2d [ 762.904542] [<c0306370>] sk_stream_alloc_skb+0x42/0xaa [ 762.904542] [<c0306567>] tcp_sendmsg+0x18f/0x68b [ 762.904542] [<c031f3dc>] ? ip_fast_csum+0x30/0x30 [ 762.904542] [<c0320193>] inet_sendmsg+0x53/0x5a [ 762.904542] [<c02cb633>] sock_aio_write+0xd2/0xda [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c01a1017>] do_sync_write+0x9f/0xd9 [ 762.904542] [<c01a2111>] ? file_free_rcu+0x2f/0x2f [ 762.904542] [<c01a17a1>] vfs_write+0x8f/0xab [ 762.904542] [<c01a284d>] ? fget_light+0x75/0x7c [ 762.904542] [<c01a1900>] sys_write+0x3d/0x5e [ 762.904542] [<c0349ec9>] syscall_call+0x7/0xb [ 762.904542] [<c0340000>] ? rp_sidt+0x41/0x83 Bug is that sk_sockets_allocated_read_positive() calls percpu_counter_sum_positive() without BH being disabled. This bug was added in commit 180d8cd9 (foundations of per-cgroup memory pressure controlling.), since previous code was using percpu_counter_read_positive() which is IRQ safe. In __sk_mem_schedule() we dont need the precise count of allocated sockets and can revert to previous behavior. Reported-by:Denys Fedoryshchenko <denys@visp.net.lb> Sined-off-by:
-
git://1984.lsi.us.es/netDavid S. Miller authored
-
Pablo Neira Ayuso authored
The current checking always succeeded. We have to check the first character of the string to check that it's empty, thus, skipping the timeout path. This fixes the use of the CT target without the timeout option. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Hans Schillstrom authored
Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by:
"Ryan O'Hara" <rohara@redhat.com> Signed-off-by:
Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Simon Horman <horms@verge.net.au>
-
Hans Schillstrom authored
ip_vs_create_timeout_table() can return NULL All functions protocol init_netns is affected of this patch. Signed-off-by:
-
Hans Schillstrom authored
Avoid crash when registering shedulers after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by:
-
- 28 Apr, 2012 2 commits
-
-
Neil Horman authored
Eric Dumazet pointed out to me that the drop_monitor protocol has some holes in its smp protections. Specifically, its possible to replace data->skb while its being written. This patch corrects that by making data->skb an rcu protected variable. That will prevent it from being overwritten while a tracepoint is modifying it. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: David Miller <davem@davemloft.net> Acked-by:
-
Neil Horman authored
Eric Dumazet pointed out this warning in the drop_monitor protocol to me: [ 38.352571] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 38.352576] in_atomic(): 1, irqs_disabled(): 0, pid: 4415, name: dropwatch [ 38.352580] Pid: 4415, comm: dropwatch Not tainted 3.4.0-rc2+ #71 [ 38.352582] Call Trace: [ 38.352592] [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352599] [<ffffffff81063f2a>] __might_sleep+0xca/0xf0 [ 38.352606] [<ffffffff81655b16>] mutex_lock+0x26/0x50 [ 38.352610] [<ffffffff8153aaf0>] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352616] [<ffffffff810b72d9>] tracepoint_probe_register+0x29/0x90 [ 38.352621] [<ffffffff8153a585>] set_all_monitor_traces+0x105/0x170 [ 38.352625] [<ffffffff8153a8ca>] net_dm_cmd_trace+0x2a/0x40 [ 38.352630] [<ffffffff8154a81a>] genl_rcv_msg+0x21a/0x2b0 [ 38.352636] [<ffffffff810f8029>] ? zone_statistics+0x99/0xc0 [ 38.352640] [<ffffffff8154a600>] ? genl_rcv+0x30/0x30 [ 38.352645] [<ffffffff8154a059>] netlink_rcv_skb+0xa9/0xd0 [ 38.352649] [<ffffffff8154a5f0>] genl_rcv+0x20/0x30 [ 38.352653] [<ffffffff81549a7e>] netlink_unicast+0x1ae/0x1f0 [ 38.352658] [<ffffffff81549d76>] netlink_sendmsg+0x2b6/0x310 [ 38.352663] [<ffffffff8150824f>] sock_sendmsg+0x10f/0x130 [ 38.352668] [<ffffffff8150abe0>] ? move_addr_to_kernel+0x60/0xb0 [ 38.352673] [<ffffffff81515f04>] ? verify_iovec+0x64/0xe0 [ 38.352677] [<ffffffff81509c46>] __sys_sendmsg+0x386/0x390 [ 38.352682] [<ffffffff810ffaf9>] ? handle_mm_fault+0x139/0x210 [ 38.352687] [<ffffffff8165b5bc>] ? do_page_fault+0x1ec/0x4f0 [ 38.352693] [<ffffffff8106ba4d>] ? set_next_entity+0x9d/0xb0 [ 38.352699] [<ffffffff81310b49>] ? tty_ldisc_deref+0x9/0x10 [ 38.352703] [<ffffffff8106d363>] ? pick_next_task_fair+0x63/0x140 [ 38.352708] [<ffffffff8150b8d4>] sys_sendmsg+0x44/0x80 [ 38.352713] [<ffffffff8165f8e2>] system_call_fastpath+0x16/0x1b It stems from holding a spinlock (trace_state_lock) while attempting to register or unregister tracepoint hooks, making in_atomic() true in this context, leading to the warning when the tracepoint calls might_sleep() while its taking a mutex. Since we only use the trace_state_lock to prevent trace protocol state races, as well as hardware stat list updates on an rcu write side, we can just convert the spinlock to a mutex to avoid this problem. Signed-off-by:
-
- 27 Apr, 2012 6 commits
-
-
Grazvydas Ignotas authored
This driver currently leaves elp_work behind when stopping, which occasionally results in data corruption because work function ends up accessing freed memory, typical symptoms of this are various worker_thread crashes. Fix it by cancelling elp_work. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Grazvydas Ignotas authored
Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access. Fix this by freeing glue data last. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by:
-
Seth Forshee authored
Commit 2a190322 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau <nbd@openwrt.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Wey-Yi Guy authored
"iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Jonathan Bither authored
When our driver device is removed on the AHB bus, our IO memory is never unmapped. Signed-off-by:
Jonathan Bither <jonbither@gmail.com> Reviewed-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Franky Lin authored
dpc takes care of all data packets transmissions for sdio function 2. It is possible that it misses some completion events when the traffic is heavy or it's running on a slow cpu. A linked list is introduced to make sure dpc is invoked whenever needed. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
