- 04 Jul, 2013 15 commits
-
-
Eduardo Valentin authored
Enable the bandgap driver for TI SoCs thermal support. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Enric Balletbo i Serra authored
Platform code used to depend on bootloadres for correctly setting the mux pin modes. But bootloaders should only set the minimum required mux pins. So, DSS mux pins are not set in U-Boot anymore and video display is broken on IGEPv2 when booting with newer U-Boot versions. Setup the DSS pin muxes to enable display functionality. Signed-off-by:
Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Pavel Machek authored
We still need video & sound drivers with device tree enabled. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Thomas Meyer authored
Cocci spatch "ptr_ret.spatch" Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Paul Bolle authored
The OMAP runtime PM implementation was removed in v3.0. But one Makefile line, which was used to tweak CFLAGS, was overlooked. Remove it too. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Santosh Shilimkar authored
ARM errata 798181 is applicable for OMAP5 based devices. So enable the same in the build. Errata extract and workaround information is as below. On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not adequately shooting down all use of the old entries. The ARM_ERRATA_798181 option enables the Linux kernel workaround for this erratum which sends an IPI to the CPUs that are running the same ASID as the one being invalidated. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Nishanth Menon authored
On platforms such as Cortex-A15 based OMAP5, SCU is not used, however since much code is shared between Cortex-A9 based OMAP4 (which uses SCU) and OMAP5, It does help to have inline functions returning error values when SCU is not present on the platform. arch/arm/mach-omap2/omap-smp.c which is common between OMAP4 and 5 handles the SCU usage only for OMAP4. This fixes the following build failure with OMAP5 only build: arch/arm/mach-omap2/built-in.o: In function `omap4_smp_init_cpus': arch/arm/mach-omap2/omap-smp.c:185: undefined reference to `scu_get_core_count' arch/arm/mach-omap2/built-in.o: In function `omap4_smp_prepare_cpus': arch/arm/mach-omap2/omap-smp.c:211: undefined reference to `scu_enable' Reported-by:
Pekon Gupta <pekon@ti.com> Reported-by:
Vincent Stehlé <v-stehle@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Nishanth Menon authored
CPU sleep and resume functions for Cortex-A9 based OMAP4 and Cortex-A15 based OMAP5 are different. Hence, even though we reuse most of the remaining file as part of OMAP4/5 consolidation, build OMAP4 specific sleep/resume operations only for OMAP4. SCU is not used OMAP5. This fixes the following build failure with OMAP5 only build: arch/arm/mach-omap2/built-in.o: In function `scu_gp_set': arch/arm/mach-omap2/sleep44xx.S:132: undefined reference to `scu_power_mode' arch/arm/mach-omap2/built-in.o: In function `scu_gp_clear': arch/arm/mach-omap2/sleep44xx.S:229: undefined reference to `scu_power_mode' Reported-by:
-
Afzal Mohammed authored
of_property_read_string_index(...,&oh_name) in omap_dm_timer_init_one does not alter the value of 'oh_name' even if the relevant function fails and as 'oh_name' in stack may have a non-zero value, it would be misunderstood by timer code that DT has specified "ti,hwmod" property for timer. 'oh_name' in this scenario would be a junk value, this would result in module not being enabled by hwmod API's for timer, and in turn crash. Signed-off-by:
Afzal Mohammed <afzal@ti.com> Acked-by:
Jon Hunter <jgchunter@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: - new driver to support GMT G762/G763 pwm fan controllers - add support for DS1631, DS1721, and DS1731 to ds1621 driver - remove detect function from ds1621 driver as unreliable - bug fixes in nct6775, iio_hwmon, and adm1021 drivers - remove redundant platform_set_drvdata in various drivers - add device tree support to ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ds1621) Fix temperature rounding operations hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775 hwmon: (nct6775) Fix temperature alarm attributes Add support for GMT G762/G763 PWM fan controllers hwmon: (ina2xx) Add device tree support to pass the shunt resistor hwmon: (ds1621) Update documentation hwmon: (ds1621) Add DS1731 chip support to ds1621 driver hwmon: (iio_hwmon) add alias table hwmon: (adm1021) Do not create min sysfs attributes for LM84 hwmon: (ds1621) Remove detect function hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation hwmon: (ds1621) Add ds1721 update interval sysfs attribute hwmon: (ds1621) Add ds1721 chip support hwmon: (w83627ehf) Remove redundant platform_set_drvdata() hwmon: (ntc_thermistor) Remove redundant platform_set_drvdata() hwmon: (i5k_amb) Remove redundant platform_set_drvdata() hwmon: (coretemp) Remove redundant platform_set_drvdata() hwmon: (abituguru3) Remove redundant platform_set_drvdata()
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-ledsLinus Torvalds authored
Pull LED subsystem updates from Bryan Wu: - lp55xx device tree updates - mc13xxx driver updates - some clean up * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: mc13783: Fix "uninitialized variable" warning leds: Convert led class driver from legacy pm ops to dev_pm_ops leds: leds-mc13783: Add MC13892 LED support leds: leds-mc13783: Prepare driver to support MC13892 LEDs leds: renesas-tpu: cleanup a small type issue leds: use platform_{get,set}_drvdata() leds: leds-gpio: Let device core handle pinctrl leds: lp5562: Properly setup of_device_id table leds: lp5523: Properly setup of_device_id table leds: lp5521: Properly setup of_device_id table leds: lp5562: support the device tree feature leds: lp55xx: support dynamic channel settings in the device tree structure leds: leds-ns2: remove unnecessary platform_set_drvdata() leds: leds-mc13783: remove unnecessary platform_set_drvdata() leds: leds-gpio: remove unnecessary platform_set_drvdata() leds: atmel-pwm: remove unnecessary platform_set_drvdata() leds: lp55xx: add support for Device Tree bindings
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "A relative calm release at this time with a flat diffstat. The only significant change in the ALSA core side is the support for more than 32 card instances, configurable via kconfig. Other than that, in both ASoC and other parts, mostly some improvements and fixes on the driver side. - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes - hda: Haswell HDMI audio fixes, runtime PM improvements - hda: Intel BayTrail support, ALC5505 DSP support - es1968: MediaForte M56VAP support - usb-audio: Improved support for Yamaha/Roland devices - usb-audio: M2Tech hiFace, Audio Advantage Micro II support - hdspm: wordclock fixes - ASoC: Pending fixes for WM8962 - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500 - ASoC: Generalisation of the Bluetooth and HDMI stub drivers - ASoC: SSM2518 and RT5640 codec drivers. - ASoC: Tegra CPUs with RT5640 machine driver - ASoC: AC'97 refactoring bug fixes - ASoC: ADAU1701 driver fixes - Clean up of *_set_drvdata() in a wide range of drivers" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits) ALSA: vmaster: Fix the regression of missing vmaster hook call ALSA: hda - Add Dell SSID to support Headset Mic recording ASoC: adau1701: remove control_data assignment ASoC: adau1701: more direct regmap usage ASoC: ac97: fixup multi-platform AC'97 module build failure ASoC: pxa2xx: fixup multi-platform AC'97 build failures ASoC: tegra20-ac97: Remove unused variable ASoC: tegra20-ac97: Remove duplicate error message ALSA: usb-audio: Add Audio Advantage Micro II ASoC: tas5086: fix Mid-Z implementation ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size ALSA: Replace the magic number 44 with const ALSA: hda - Fix the max length of control name in generic parser ALSA: hda - Guess what, it's two more Dell headset mic quirks ALSA: hda - Yet another Dell headset mic quirk ALSA: hda - Add support for ALC5505 DSP power-save mode ASoC: mfld: Remove unused variable ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE ALSA: usb-audio: claim autodetected PCM interfaces all at once ALSA: usb-audio: remove superfluous Roland quirks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata updates from Tejun Heo: "Overview of changes: - The rest of maintainer email address updates. - Some core updates - more robust default behavior for port multipliers, better error reporting for SG_IO commands, and a way to better work around now ancient and probably pretty rare PATA -> SATA bridges with ATAPI devices. - sata_rcar stabilization. - Some hardware PCI ID additions and one-off low level driver updates." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) AHCI: use ATA_BUSY libata-zpodd: must use ata_tf_init() ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs libata: cleanup SAT error translation ahci: sata: add support for exynos5440 sata libata: skip SRST for all SIMG [34]7x port-multipliers ahci: remove pmp link online check in FBS EH sata highbank: add bit-banged SGPIO driver support ahci: make ahci_transmit_led_message into a function pointer sata_rcar: fix compilation warning in sata_rcar_thaw() sata_highbank: increase retry count but shorten duration for Calxeda controller ata: use pci_get_drvdata() ipr: qc_fill_rtf() method should not store alternate status register sata_rcar: add 'base' local variable to some functions sata_rcar: correct 'sata_rcar_sht' sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg() libata: do not limit R-Car SATA driver to shmobile ata: use platform_{get,set}_drvdata() AHCI: Make distinct names for ports in /proc/interrupts ... -
Linus Torvalds authored
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
-
- 03 Jul, 2013 25 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ... -
Andrew Morton authored
The x bit can easily get lost (patch(1) loses it, for example). Reported-by:
Ramkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Joern Engel authored
As the confusing naming indicates, this test has some overlap with pre-existing tests. Would be nice to merge them eventually. But since it is only test code, cleanliness is much less important than mere existence. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
-
Joern Engel authored
thuge-gen was forgotten. Fix it by removing the duplication, so we don't get too many repeats. Signed-off-by:
-
Joern Engel authored
In case this ever gets scripted, it should return 0 on success and 1 on failure. Parsing the output should be left to meatbags. Signed-off-by:
-
Kevin Hao authored
This line was introduced by fcb11918 ("resources: add arch hook for preventing allocation in reserved areas"). But the struct tmp was already assigned to *new in the above line, so this seems superfluous. Just remove it. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Tang Chen authored
ctx->ctx_lock should be ctx->completion_lock. Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Jean-Francois Dagenais authored
Power-up timing The DS2408 is sensitive to the power-on slew rate and can inadvertently power up with a test mode feature enabled. When this occurs, the P0 port does not respond to the Channel Access Write command. For most reliable operation, it is recommended to disable the test mode after every power-on reset using the Disable Test Mode sequence shown below. The 64-bit ROM code must be transmitted in the same bit sequence as with the Match ROM command, i.e., least significant bit first. This precaution is recommended in parasite power mode (VCC pin connected to GND) as well as with VCC power. Disable Test Mode: RST,PD,96h,<64-bit DS2408 ROM Code>,3Ch,RST,PD [akpm@linux-foundation.org: don't use kerenldoc token to introduce a non-kerneldoc comment, tweak whitespace] Signed-off-by:
Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Libo Chen authored
Signed-off-by:
Libo Chen <libo.chen@huawei.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Libo Chen authored
Use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Jan Luebbe authored
Instead of allocating a struct pps_gpio_platform_data in the DT case, store the necessary information in struct pps_gpio_device_data itself. This avoids an additional allocation and the ifdef. It also gets rid of some indirection. Also use dev_err instead of pr_err in the changed code. Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Jan Luebbe authored
This removes some boilerplate code (no functional changes). Signed-off-by:
-
Jan Luebbe authored
Signed-off-by:
-
Alexandru Gheorghiu authored
Replaced calls to kmalloc and memset with kzalloc. Patch found using coccinelle. Signed-off-by:
Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by:
-
Kees Cook authored
Avoid strncpy anti-pattern. [akpm@linux-foundation.org: remove the str[cpy|dup] altogether] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Rob Landley <rob@landley.net> Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
Some users have a large AoE target while others like to use many AoE targets at the same time. In the latter case, there is an opportunity to greatly improve aggregate throughput by allowing different threads to complete the I/O associated with each target. For 36 targets, 4 KiB read throughput roughly doubles, for example, with these changes in place. Signed-off-by:
-
Paul Clements authored
Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by:
Paul Clements <paul.clements@steeleye.com> Acked-by:
Rob Landley <rob@landley.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michal Belczyk authored
The NBD_CLEAR_QUE ioctl has been deprecated for quite some time (its job is now done by two other ioctls). We should stop trying to make bogus assertions in it. Also, user-level code should remove calls to NBD_CLEAR_QUE, ASAP. Signed-off-by:
Michal Belczyk <belczyk@bsd.krakow.pl> Signed-off-by:
-
Raphael S. Carvalho authored
Move statement to static initilization of init_pid_ns. Signed-off-by:
Raphael S. Carvalho <raphael.scarv@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Alexandre Bounine authored
Change endpoint device name format to use a component tag value instead of device destination ID. RapidIO specification defines a component tag to be a unique identifier for devices in a network. RapidIO switches already use component tag as part of their device name and also use it for device identification when processing error management event notifications. Forming an endpoint's device name using its component tag instead of destination ID allows to keep sysfs device directories unchanged in case if a routing process dynamically changes endpoint's destination ID as a result of route optimization. This change should not affect any existing users because a valid device destination ID always should be obtained by reading "destid" attribute and not by parsing device name. This patch also removes switchid member from struct rio_switch because it simply duplicates the component tag and does not have other use than in device name generation. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Signed-off-by:
-
