- 03 May, 2022 5 commits
-
-
Maxim Mikityanskiy authored
This commit removes the redundant check and removes the unused cqe parameter of skb_from_cqe handlers. Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Shay Drory authored
Print the initializing field in case of FW couldn't initialize before timeout. This will help to better understand the root cause in some cases. Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Shay Drory authored
Runtime devlink params always read their values from the get() callbacks. Also, it is an error to set driverinit_value for params which don't support driverinit cmode. Delete such assignments. In addition, move the set of default matching mode inside eswitch code. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Haowen Bai authored
After alloc fail, we do not need to kfree. Signed-off-by:
Haowen Bai <baihaowen@meizu.com> Signed-off-by:
-
Ziyang Xuan authored
The memory of spec is allocated with kvzalloc(), the corresponding release function should not be kfree(), use kvfree() instead. Generated by: scripts/coccinelle/api/kfree_mismatch.cocci Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
- 02 May, 2022 35 commits
-
-
Jakub Kicinski authored
Stefano Garzarella says: ==================== vsock/virtio: add support for device suspend/resume Vilas reported that virtio-vsock no longer worked properly after suspend/resume (echo mem >/sys/power/state). It was impossible to connect to the host and vice versa. Indeed, the support has never been implemented. This series implement .freeze and .restore callbacks of struct virtio_driver to support device suspend/resume. The first patch factors our the code to initialize and delete VQs. The second patch uses that code to support device suspend/resume. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> ==================== Link: https://lore.kernel.org/r/20220428132241.152679-1-sgarzare@redhat.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Stefano Garzarella authored
Implement .freeze and .restore callbacks of struct virtio_driver to support device suspend/resume. During suspension all connected sockets are reset and VQs deleted. During resume the VQs are re-initialized. Reported by: Vilas R K <vilas.r.k@intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Stefano Garzarella authored
Add virtio_vsock_vqs_init() and virtio_vsock_vqs_del() with the code that was in virtio_vsock_probe() and virtio_vsock_remove to initialize and delete VQs. These new functions will be used in the next commit to support device suspend/resume Signed-off-by:
-
Vladimir Oltean authored
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action which enforced time-based access control per stream. A stream as seen by this switch is identified by {MAC DA, VID}. We use the standard forwarding selftest topology with 2 host interfaces and 2 switch interfaces. The host ports must require timestamping non-IP packets and supporting tc-etf offload, for isochron to work. The isochron program monitors network sync status (ptp4l, phc2sys) and deterministically transmits packets to the switch such that the tc-gate action either (a) always accepts them based on its schedule, or (b) always drops them. I tried to keep as much of the logic that isn't specific to the NXP LS1028A in a new tsn_lib.sh, for future reuse. This covers synchronization using ptp4l and phc2sys, and isochron. The cycle-time chosen for this selftest isn't particularly impressive (and the focus is the functionality of the switch), but I didn't really know what to do better, considering that it will mostly be run during debugging sessions, various kernel bloatware would be enabled, like lockdep, KASAN, etc, and we certainly can't run any races with those on. I tried to look through the kselftest framework for other real time applications and didn't really find any, so I'm not sure how better to prepare the environment in case we want to go for a lower cycle time. At the moment, the only thing the selftest is ensuring is that dynamic frequency scaling is disabled on the CPU that isochron runs on. It would probably be useful to have a blacklist of kernel config options (checked through zcat /proc/config.gz) and some cyclictest scripts to run beforehand, but I saw none of those. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.comSigned-off-by:
-
jianghaoran authored
ARPHRD_TUNNEL interface can't process rs packets and will generate TX errors ex: ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2 ifconfig ethn x.x.x.x ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1480 inet x.x.x.x netmask 255.255.255.255 destination x.x.x.x inet6 fe80::5efe:ac1e:3cdb prefixlen 64 scopeid 0x20<link> tunnel txqueuelen 1000 (IPIP Tunnel) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 3 dropped 0 overruns 0 carrier 0 collisions 0 Signed-off-by:
jianghaoran <jianghaoran@kylinos.cn> Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cnSigned-off-by:
-
Pavel Begunkov authored
It's expensive to make a copy of 40B struct iov_iter to the point it was taking 0.2-0.5% of all cycles in my tests. iov_iter_revert() should be fine as it's a simple case without nested reverts/truncates. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a7e1690c00c5dfe700c30eb9a8a81ec59f6545dd.1650884401.git.asml.silence@gmail.comSigned-off-by:
-
Niels Dossche authored
Current memory failure code in the debugfs returns -ENOSPC. This is normally used for indicating that there is no space left on the device and is not applicable for memory allocation failures. Replace this with -ENOMEM. Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Link: https://lore.kernel.org/r/20220430194656.44357-1-dossche.niels@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Colin Foster says: ==================== ocelot stats improvement A couple of pick-ups after f187bfa6f35 ("net: ethernet: ocelot: remove the need for num_stats initializer") - one addresses a warning patchwork flagged about operator precedence when using macro arguments. The other is a reduction of unnecessary memory allocation. ==================== Link: https://lore.kernel.org/r/20220430232327.4091825-1-colin.foster@in-advantage.comSigned-off-by: -
Colin Foster authored
Commit 2f187bfa ("net: ethernet: ocelot: remove the need for num_stats initializer") added a macro that patchwork warned it lacked parentheses around an argument. Correct this mistake. Fixes: 2f187bfa ("net: ethernet: ocelot: remove the need for num_stats initializer") Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
-
Colin Foster authored
Commit 2f187bfa ("net: ethernet: ocelot: remove the need for num_stats initializer") added a flags field to the ocelot stats structure. The same behavior can be achieved without this additional field taking up extra memory. Remove this structure element to free up RAM Suggested-by:
-
Jakub Kicinski authored
==================== pull-request: ieee802154-next 2022-05-01 Miquel Raynal landed two patch series bundled in this pull request. The first series re-works the symbol duration handling to better accommodate the needs of the various phy layers in ieee802154. In the second series Miquel improves th errors handling from drivers up mac802154. THis streamlines the error handling throughout the ieee/mac802154 stack in preparation for sync TX to be introduced for MLME frames. ==================== Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.orgSigned-off-by:
-
Paolo Abeni authored
Jakub Kicinski says: ==================== net: more heap allocation and split of rtnl_newlink() Small refactoring of rtnl_newlink() to fix a stack usage warning and make the function shorter. ==================== Link: https://lore.kernel.org/r/20220429235508.268349-1-kuba@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Pure code move. Signed-off-by:
-
Jakub Kicinski authored
__rtnl_newlink() is 250LoC, but has a few clear sections. Move the part which creates a new netdev to a separate function. For ease of review code will be moved in the next change. Signed-off-by:
-
Jakub Kicinski authored
Commit a2939745 ("rtnetlink: avoid frame size warning in rtnl_newlink()") moved to allocating the largest attribute array of rtnl_newlink() on the heap. Kalle reports the stack has grown above 1k again: net/core/rtnetlink.c:3557:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Move more attrs to the heap, wrap them in a struct. Don't bother with linkinfo, it's referenced a lot and we take its size so it's awkward to move, plus it's small (6 elements). Reported-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Andrew Lunn says: ==================== Use MMD/C45 helpers MDIO busses can perform two sorts of bus transaction, defined in clause 22 and clause 45 of 802.3. This results in two register addresses spaces. The current driver structure for indicating if C22 or C45 should be used is messy, and many C22 only bus drivers will wrongly interpret a C45 transaction as a C22 transaction. This patchset is a preparation step to cleanup the situation. It converts MDIO bus users to make use of existing _mmd and _c45 helpers to perform accesses to C45 registers. This will later allow C45 and C22 to be kept separate. ==================== Link: https://lore.kernel.org/r/20220430173037.156823-1-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special mdio address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Reviewed-by:
-
Andrew Lunn authored
Rather than construct special phy device addresses to access C45 registers, use the mmd helpers. These will directly call the C45 API of the MDIO bus driver. Signed-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by:
-
Andrew Lunn authored
Stop using the helpers to construct a special phy address which indicates C45. Instead use the C45 accessors, which will call the busses C45 specific read/write API. Signed-off-by:
-
Paolo Abeni authored
Merge tag 'linux-can-next-for-5.19-20220502' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-05-02 this is a pull request of 9 patches for net-next/master. The first patch is by Biju Das and documents renesas,r9a07g043-canfd support in the renesas,rcar-canfd bindings document. Jakub Kicinski's patch removes a copy of the NAPI_POLL_WEIGHT define from the m_can driver. The last 7 patches all target the ctucanfd driver. Pavel Pisa provides 2 patch which update the documentation. 2 patches by Jiapeng Chong remove unneeded includes and error messages. And another 3 patches by Pavel Pisa to further clean up the driver (remove inline keyword, remove unneeded debug statements, and remove unneeded module parameters). linux-can-next-for-5.19-20220502 * tag 'linux-can-next-for-5.19-20220502' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ctucanfd: remove PCI module debug parameters can: ctucanfd: remove debug statements can: ctucanfd: remove inline keyword from local static functions can: ctucanfd: ctucan_platform_probe(): remove unnecessary print function dev_err() can: ctucanfd: remove unused including <linux/version.h> docs: networking: device drivers: can: ctucanfd: update author e-mail docs: networking: device drivers: can: add ctucanfd to index can: m_can: remove a copy of the NAPI_POLL_WEIGHT define dt-bindings: can: renesas,rcar-canfd: Document RZ/G2UL support ==================== Link: https://lore.kernel.org/r/20220502075914.1905039-1-mkl@pengutronix.deSigned-off-by:
-
Fei Qin authored
VxLAN belongs to UDP-based encapsulation protocol. Inner TSO for VxLAN packet with udpcsum requires offloading of outer header csum. The device doesn't support outer header csum offload. However, inner TSO for VxLAN with udpcsum can still work with GSO_PARTIAL offload, which means outer udp csum computed by stack and inner tcp segmentation finished by hardware. Thus, the patch enable features "NETIF_F_GSO_UDP_TUNNEL_CSUM" and "NETIF_F_GSO_PARTIAL" and set gso_partial_features. Signed-off-by:
Fei Qin <fei.qin@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220430231150.175270-1-simon.horman@corigine.comSigned-off-by:
-
Jaehee Park authored
Add a boilerplate test loop to run all tests in vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to run. Remove the vrf_strict_mode_tests function which is now unused. Signed-off-by:
Jaehee Park <jhpark1013@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-ExtremeSigned-off-by:
-
Paolo Abeni authored
Peilin Ye says: ==================== devices always NETIF_F_LLTX v1: https://lore.kernel.org/netdev/cover.1650580763.git.peilin.ye@bytedance.com/ change since v1: - deleted "depends on patch..." in [1/2]'s commit message This patchset depends on these fixes [1], which has been merged into net-next. Since o_seqno is now atomic_t, we can always turn on NETIF_F_LLTX for [IP6]GRE[TAP] devices, since we no longer need the TX lock (&txq->_xmit_lock). We could probably do the same thing to [IP6]ERSPAN devices as well, but I'm not familiar with them yet. For example, ERSPAN devices are initialized as |= GRE_FEATURES in erspan_tunnel_init(), but I don't see IP6ERSPAN devices being initialized as |= GRE6_FEATURES. Where should we initialize IP6ERSPAN devices' ->features? Please suggest if I'm missing something, thanks! [1] https://lore.kernel.org/netdev/cover.1650575919.git.peilin.ye@bytedance.com/ ==================== Link: https://lore.kernel.org/r/cover.1651207788.git.peilin.ye@bytedance.comSigned-off-by:
-
Peilin Ye authored
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark IP6GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Signed-off-by:
-
Peilin Ye authored
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by:
-
Pavel Pisa authored
This patch removes the PCI module debug parameters, which are not needed anymore, to make both checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> [mkl: split into separate patches] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Pavel Pisa authored
This patch removes the debug statements from the driver to make checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
-
Pavel Pisa authored
This patch removes the inline keywords from the local static functions to make both checkpatch.pl and patchwork happy. Link: https://lore.kernel.org/all/1fd684bcf5ddb0346aad234072f54e976a5210fb.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
-
Jiapeng Chong authored
The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warnings: | drivers/net/can/ctucanfd/ctucanfd_platform.c:67:2-9: | line 67 is redundant because platform_get_irq() already prints an error. Link: https://lore.kernel.org/all/20220421203242.7335-1-jiapeng.chong@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
-
Jiapeng Chong authored
Eliminate the follow versioncheck warning: | drivers/net/can/ctucanfd/ctucanfd_base.c: 34 linux/version.h not needed. Link: https://lore.kernel.org/all/20220421202852.2693-1-jiapeng.chong@linux.alibaba.comReported-by:
-
Pavel Pisa authored
This patch updates the author's email address. Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.cz Cc: Odrej Ille <ondrej.ille@gmail.com> Signed-off-by:
-
Pavel Pisa authored
This patch adds the ctucanfd-driver document to the index. Link: https://lore.kernel.org/all/e4396244da6b008c671def9f50bb983a10389863.1650816929.git.pisa@cmp.felk.cvut.czSigned-off-by:
-
Jakub Kicinski authored
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Link: https://lore.kernel.org/all/20220429174446.196655-1-kuba@kernel.orgSigned-off-by:
-
