Test that packets hitting a blackhole nexthop are trapped to the CPU
when the trap is enabled. Test that packets are not reported when the
trap is disabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Register with devlink the blackhole_nexthop trap so that mlxsw will be
able to report packets dropped due to a blackhole nexthop.

The internal trap identifier is "DISCARD_ROUTER3", which traps packets
dropped in the adjacency table.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a packet trap to report packets that were dropped due to a
blackhole nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Test that IPv4 and IPv6 ping fail when the route is using a blackhole
nexthop or a group with a blackhole nexthop. Test that ping passes when
the route starts using a valid nexthop.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Test the mlxsw allows blackhole nexthops to be installed and that the
nexthops are marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for blackhole nexthops by programming them to the adjacency
table with a discard action.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The two are the same, but for blackhole nexthops we will not have an
associated neighbour struct, so resolve the RIF from the nexthop struct
itself instead.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now that the driver creates a loopback RIF during its initialization, it
can be used to program the adjacency entries for unresolved nexthops
instead of other RIFs. The loopback RIF is guaranteed to exist for the
entire life time of the driver, unlike other RIFs that come and go.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Unresolved nexthops are currently written to the adjacency table with a
discard action. Packets hitting such entries are trapped to the CPU via
the 'DISCARD_ROUTER3' trap which can be enabled or disabled on demand,
but is always enabled in order to ensure the kernel can resolve the
unresolved neighbours.

This trap will be needed for blackhole nexthops support. Therefore, move
unresolved nexthops to explicitly program the adjacency entries with a
trap action and a different trap identifier, 'RTR_EGRESS0'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Up until now RIFs (router interfaces) were created on demand (e.g.,
when an IP address was added to a netdev). However, sometimes the device
needs to be provided with a RIF when one might not be available.

For example, adjacency entries that drop packets need to be programmed
with an egress RIF despite the RIF not being used to forward packets.

Create such a RIF during initialization so that it could be used later
on to support blackhole nexthops.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

David Howells says:

====================
rxrpc: Prelude to gssapi support

Here are some patches that do some reorganisation of the security class
handling in rxrpc to allow implementation of the RxGK security class that
will allow AF_RXRPC to use GSSAPI-negotiated tokens and better crypto.  The
RxGK security class is not included in this patchset.

It does the following things:

 (1) Add a keyrings patch to provide the original key description, as
     provided to add_key(), to the payload preparser so that it can
     interpret the content on that basis.  Unfortunately, the rxrpc_s key
     type wasn't written to interpret its payload as anything other than a
     string of bytes comprising a key, but for RxGK, more information is
     required as multiple Kerberos enctypes are supported.

 (2) Remove the rxk5 security class key parsing.  The rxk5 class never got
     rolled out in OpenAFS and got replaced with rxgk.

 (3) Support the creation of rxrpc keys with multiple tokens of different
     types.  If some types are not supported, the ENOPKG error is
     suppressed if at least one other token's type is supported.

 (4) Punt the handling of server keys (rxrpc_s type) to the appropriate
     security class.

 (5) Organise the security bits in the rxrpc_connection struct into a
     union to make it easier to override for other classes.

 (6) Move some bits from core code into rxkad that won't be appropriate to
     rxgk.

* tag 'rxrpc-next-20201123' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  rxrpc: Ask the security class how much space to allow in a packet
  rxrpc: rxkad: Don't use pskb_pull() to advance through the response packet
  rxrpc: Organise connection security to use a union
  rxrpc: Don't reserve security header in Tx DATA skbuff
  rxrpc: Merge prime_packet_security into init_connection_security
  rxrpc: Fix example key name in a comment
  rxrpc: Ignore unknown tokens in key payload unless no known tokens
  rxrpc: Make the parsing of xdr payloads more coherent
  rxrpc: Allow security classes to give more info on server keys
  rxrpc: Don't leak the service-side session key to userspace
  rxrpc: Hand server key parsing off to the security class
  rxrpc: Split the server key type (rxrpc_s) into its own file
  rxrpc: Don't retain the server key in the connection
  rxrpc: Support keys with multiple authentication tokens
  rxrpc: List the held token types in the key description in /proc/keys
  rxrpc: Remove the rxk5 security class as it's now defunct
  keys: Provide the original description to the key preparser
====================

Link: https://lore.kernel.org/r/160616220405.830164.2239716599743995145.stgit@warthog.procyon.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver uses a normal timer for TX coalescing, which means that the
with the default tx-usecs of 1000 microseconds the cleanups actually
happen 10 ms or more later with HZ=100.  This leads to very low
througput with TCP when bridged to a slow link such as a 4G modem.  Fix
this by using an hrtimer instead.

On my ARM platform with HZ=100 and the default TX coalescing settings
(tx-frames 25 tx-usecs 1000), with "tc qdisc add dev eth0 root netem
delay 60ms 40ms rate 50Mbit" run on the server, netperf's TCP_STREAM
improves from ~5.5 Mbps to ~100 Mbps.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20201120150208.6838-1-vincent.whitchurch@axis.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

s/tranport/transport/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201122180704.1366636-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.

Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.

Fix all the places which made use of this implicit include.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Memory allocation are done with 'dma_alloc_coherent()'. Be consistent
and use 'dma_free_coherent()' to free the corresponding memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121090330.1332543-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121090302.1332491-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kurt Kanzenbach says:

====================
net: dsa: hellcreek: Minor cleanups

fix two minor issues in the hellcreek driver.
====================

Link: https://lore.kernel.org/r/20201121114455.22422-1-kurt@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When DSA is not loaded when the driver is probed an error message is
printed. But, that's not really an error, just a defer. Use dev_err_probe()
instead.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unused and add needed includes. No functional change.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Christian Eggers says:

====================
net: ptp: introduce common defines for PTP message types

This series introduces commen defines for PTP event messages. Driver
internal defines are removed and some uses of magic numbers are replaced
by the new defines.
====================

Link: https://lore.kernel.org/r/20201120084106.10046-1-ceggers@arri.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove driver internal defines for this. Masking msgtype with 0xf is
already done within ptp_get_msgtype().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove usage of magic numbers.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Using PTP wide defines will obsolete different driver internal defines
and uses of magic numbers.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We're about to do reshuffling in networking headers and
eliminate some implicit includes. This results in:

In file included from ../net/ipv4/netfilter/arp_tables.c:26:
include/net/compat.h:60:40: error: unknown type name ‘compat_uptr_t’; did you mean ‘compat_ptr_ioctl’?
    struct sockaddr __user **save_addr, compat_uptr_t *ptr,
                                        ^~~~~~~~~~~~~
                                        compat_ptr_ioctl
include/net/compat.h:61:4: error: unknown type name ‘compat_size_t’; did you mean ‘compat_sigset_t’?
    compat_size_t *len);
    ^~~~~~~~~~~~~
    compat_sigset_t

Currently net/compat.h depends on linux/compat.h being included
first. After the upcoming changes this would break the 32bit build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201121214844.1488283-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ask the security class how much header and trailer space to allow for when
allocating a packet, given how much data is remaining.

This will allow the rxgk security class to stick both a trailer in as well
as a header as appropriate in the future.
Signed-off-by: David Howells <dhowells@redhat.com>

Call netdev notifiers before and after changing the device type.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20201118063919.29485-1-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the rxkad security class, don't use pskb_pull() to advance through the
contents of the response packet.  There's no point, especially as the next
and last access to the skbuff still has to allow for the wire header in the
offset (which we didn't advance over).

Better to just add the displacement to the next offset.
Signed-off-by: David Howells <dhowells@redhat.com>

Organise the security information in the rxrpc_connection struct to use a
union to allow for different data for different security classes.
Signed-off-by: David Howells <dhowells@redhat.com>

Insert the security header into the skbuff representing a DATA packet to be
transmitted rather than using skb_reserve() when the packet is allocated.
This makes it easier to apply crypto that spans the security header and the
data, particularly in the upcoming RxGK class where we have a common
encrypt-and-checksum function that is used in a number of circumstances.
Signed-off-by: David Howells <dhowells@redhat.com>

Merge the ->prime_packet_security() into the ->init_connection_security()
hook as they're always called together.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix an example of an rxrpc key name in a comment.
Signed-off-by: David Howells <dhowells@redhat.com>

When parsing a payload for an rxrpc-type key, ignore any tokens that are
not of a known type and don't give an error for them - unless there are no
tokens of a known type.
Signed-off-by: David Howells <dhowells@redhat.com>

Make the parsing of xdr-encoded payloads, as passed to add_key, more
coherent.  Shuttling back and forth between various variables was a bit
hard to follow.
Signed-off-by: David Howells <dhowells@redhat.com>

Allow a security class to give more information on an rxrpc_s-type key when
it is viewed in /proc/keys.  This will allow the upcoming RxGK security
class to show the enctype name here.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't let someone reading a service-side rxrpc-type key get access to the
session key that was exchanged with the client.  The server application
will, at some point, need to be able to read the information in the ticket,
but this probably shouldn't include the key material.
Signed-off-by: David Howells <dhowells@redhat.com>

Hand responsibility for parsing a server key off to the security class.  We
can determine which class from the description.  This is necessary as rxgk
server keys have different lookup requirements and different content
requirements (dependent on crypto type) to those of rxkad server keys.
Signed-off-by: David Howells <dhowells@redhat.com>

Split the server private key type (rxrpc_s) out into its own file rather
than mingling it with the authentication/client key type (rxrpc) since they
don't really bear any relation.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't retain a pointer to the server key in the connection, but rather get
it on demand when the server has to deal with a response packet.

This is necessary to implement RxGK (GSSAPI-mediated transport class),
where we can't know which key we'll need until we've challenged the client
and got back the response.

This also means that we don't need to do a key search in the accept path in
softirq mode.

Also, whilst we're at it, allow the security class to ask for a kvno and
encoding-type variant of a server key as RxGK needs different keys for
different encoding types.  Keys of this type have an extra bit in the
description:

	"<service-id>:<security-index>:<kvno>:<enctype>"
Signed-off-by: David Howells <dhowells@redhat.com>

rxrpc-type keys can have multiple tokens attached for different security
classes.  Currently, rxrpc always picks the first one, whether or not the
security class it indicates is supported.

Add preliminary support for choosing which security class will be used
(this will need to be directed from a higher layer) and go through the
tokens to find one that's supported.
Signed-off-by: David Howells <dhowells@redhat.com>

When viewing an rxrpc-type key through /proc/keys, display a list of held
token types.
Signed-off-by: David Howells <dhowells@redhat.com>