There are two idle injection implementation in the Linux kernel. One
via intel_powerclamp and the other using powercap/idle_inject. Both
implementation end up in calling play_idle* function from a FIFO
priority thread. Both can't be used at the same time.

It is better to use one idle injection framework for better
maintainability. In this way, there is only one caller for play_idle.

Here powercap/idle_inject can be used for both per-core and for system
wide idle injection. This framework has a well defined interface which
allow registry for per-core or for all CPUs (system wide).

This reduces code complexity in the intel powerclamp driver as all the
per CPU kthreads, delayed work and calls to play_idle can be removed.

The changes include:
 - Remove unneeded include files
 - Remove per CPU kthread workers: balancing_work and idle_injection_work.
 - Reuse the compensation related code by moving from previous worker
   thread to idle_injection callback.
 - Adjust the idle_duration and runtime by using powercap/idle_inject
   interface.
 - Remove all variables, which are not required once powercap/idle_inject
   is used.
 - Add mutex to avoid race during removal of idle injection during module
   unload and user action to change idle inject percent. Also for
   protection during dynamic adjustment of run and idle time from
   update() callback.
 - Remove online/offline callbacks to designate control CPU
 - Use cpu_present_mask global variable for CPU mask
 - Remove hot plug locks
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The powercap/idle_inject core uses play_idle_precise() to inject idle
time. But play_idle_precise() can't ensure that the CPU is fully idle
for the specified duration because of wakeups due to interrupts. To
compensate for the reduced idle time due to these wakes, the caller
can adjust requested idle time for the next cycle.

The goal of idle injection is to keep system at some idle percent on
average, so this is fine to overshoot or undershoot instantaneous idle
times.

The idle inject core provides an interface idle_inject_set_duration()
to set idle and runtime duration.

Some architectures provide interface to get actual idle time observed
by the hardware. So, the effective idle percent can be adjusted using
the hardware feedback. For example, Intel CPUs provides package idle
counters, which is currently used by Intel powerclamp driver to
readjust runtime duration.

When the caller's desired idle time over a period is less or greater
than the actual CPU idle time observed by the hardware, caller can
readjust idle and runtime duration for the next cycle.

The only way this can be done currently is by monitoring hardware idle
time from a different software thread and readjust idle and runtime
duration using idle_inject_set_duration().

This can be avoided by adding a callback which callers can register and
readjust from this callback function.

Add a capability to register an optional update() callback, which can be
called from the idle inject core before waking up CPUs for idle injection.
This callback can be registered via a new interface:
idle_inject_register_full().

During this process of constantly adjusting idle and runtime duration
there can be some cases where actual idle time is more than the desired.
In this case idle inject can be skipped for a cycle. If update() callback
returns false, then the idle inject core skips waking up CPUs for the
idle injection.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Export symbols for external interfaces, so that they can be used in
other loadable modules.

Export is done under name space IDLE_INJECT.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.

It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.

For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.

Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.

Fixes: b721ca0d ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because the only member of struct board_info is the name, the
board_info[] array of struct board_info elements can be replaced with
an array of strings.

Modify the code accordingly and drop struct board_info.

No intentional functional impact.
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Use capitals in the names of the board ID symbols and add the PCH_
prefix to each of them for consistency.

Also rename the board_ids enum accordingly.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Fold pch_suspend() and pch_resume(), that each have only one caller,
into their respective callers to make the code somewhat easier to
follow.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Fold two functions, pch_hw_init() and pch_get_temp(), that each have
only one caller, into their respective callers to make the code somewhat
easier to follow.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

The same device operations object is pointed to by all of the board
configurations in the driver, so effectively the same operations
callbacks are used by all of them which only adds overhead (that can
be significant due to retpolines) for no real purpose.

For this reason, drop the device operations object and replace the
respective callback invocations by direct calls to the specific
functions that were previously pointed to by callback pointers.

No intentional change in behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Because the same device operations callbacks are used for all supported
boards, they are in fact generic, so rename them to reflect that.

Also rename the operations object itself for consistency.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Both pch_wpt_init() and pch_wpt_get_temp() can return the proper
result via their return values, so they do not need to use return
pointers.

Modify them accordingly.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Modify pch_wpt_add_acpi_psv_trip() to return an int value instead of
using a return pointer for that.

While at it, drop an excessive empty code line.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Instead of using snprintf() to populate the ACPI object name in
int340x_thermal_set_trip_temp(), use an appropriate initializer
and make the function fail if its trip argument is greater than 9,
because ACPI object names can only be 4 characters long and it does
not make sense to even try to evaluate objects with longer names (that
argument is guaranteed to be non-negative, because it comes from the
thermal code that will not pass negative trip numbers to zone
callbacks).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

The explicit casting from int to unsigned long in
int340x_thermal_get_zone_temp() is pointless, becuase the multiplication
result is cast back to int by the assignment in the same statement, so
drop it.

No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Rename local variables int34x_thermal_zone in int340x_thermal_zone_add()
and int340x_thermal_zone_remove() to int34x_zone which allows a number
of code lines to be shorter and easier to read and adjust some white
space for consistency.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Improve some inconsistent usage of white space in int340x_thermal_zone.c,
fix up one coding style issue in it (missing braces around an else
branch of a conditional) and while at it replace a !ACPI_FAILURE()
check with an equivalent ACPI_SUCCESS() one.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

It is slightly better to make the ACPI thermal helper functions retrieve
the trip point temperature only instead of doing the full trip point
initialization, because they are also used for updating some already
registered trip points, in which case initializing a new trip just
in order to update the temperature of an existing one is somewhat
wasteful.

Modify the ACPI thermal helpers accordingly and update their users.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Modify int340x_thermal_zone_add() to register the thermal zone along
with a trip points table, which allows the trip-related zone callbacks
to be dropped, because they are not needed any more.

In order to consolidate the code, use ACPI trip library functions to
populate generic trip points in int340x_thermal_read_trips() and to
update them in int340x_thermal_update_trips().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because the ->get_trip_temp() and ->get_trip_type() thermal zone
callbacks are only invoked from __thermal_zone_get_trip() which is
always called by the thermal core under the zone lock, it is sufficient
for int340x_thermal_update_trips() to acquire the zone lock for mutual
exclusion with those callbacks.

Accordingly, modify int340x_thermal_update_trips() to use the zone lock
instead of the internal trip_mutex and drop the latter which is not
necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is generally invalid to change the trip point indices after they have
been exposed via sysfs.

Moreover, the thermal objects in the ACPI namespace cannot go away and
appear on the fly.  In practice, the only thing that can happen when the
INT3403_PERF_TRIP_POINT_CHANGED notification is sent by the platform
firmware is a change of the return values of those thermal objects.

For this reason, add a special function for updating the trip point
temperatures after re-evaluating the respective ACPI thermal objects
and change int3403_notify() to invoke it instead of
int340x_thermal_read_trips() that would change the trip point indices
on errors.  Also remove the locking from the latter, because it is only
called before registering the thermal zone and it cannot race with the
zone's callbacks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In some cases it is still useful to register a trip point if the
temperature returned by the corresponding ACPI thermal object (for
example, _HOT) is invalid to start with, because the same ACPI
thermal object may start to return a valid temperature after a
system configuration change (for example, from an AC power source
to battery an vice versa).

For this reason, if the ACPI thermal object evaluated by
thermal_acpi_trip_init() successfully returns a temperature value that
is out of the range of values taken into account, initialize the trip
point using THERMAL_TEMP_INVALID as the temperature value instead of
returning an error to allow the user of the trip point to decide what
to do with it.

Also update pch_wpt_add_acpi_psv_trip() to reject trip points with
invalid temperature values.

Fixes: 7a0e3974 ("thermal: ACPI: Add ACPI trip point routines")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Make proc_thermal_pci_probe() register the TCPU_PCI thermal zone along
with the trip point used by it and drop the zone callbacks related to
this trip point that are not needed any more.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is possible that the system manufacturer locks down thermal tuning
beyond what is usually done on the given platform. In that case user
space calibration tools should not try to adjust the thermal
configuration of the system.

To allow user space to check if that is the case, add a new sysfs
attribute "production_mode" that will be present when the ACPI DCFG
method is present under the INT3400 device object in the ACPI Namespace.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().

Fixes: 6757a7ab ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().

But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.

To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().

Fixes: 5fbf7f27 ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The thermal framework gives the possibility to register the trip
points along with the thermal zone.  When that is done, no get_trip_*
callbacks are needed and they can be removed.

Convert the existing callbacks content logic into generic trip points
initialization code and register them along with the thermal zone.

In order to consolidate the code, use an ACPI trip library function
to populate a generic trip point.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits, rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Add library routines to populate a generic thermal trip point
structure with data obtained by evaluating a specific object in the
ACPI Namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

Add the PCI ID for the Wellsburg C610 series chipset PCH.

The driver can read the temperature from the Wellsburg PCH with only
the PCI ID added and no other modifications.
Signed-off-by: Tim Zimmermann <tim@linux4.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* thermal: (734 commits)
  thermal: core: call put_device() only after device_register() fails
  Linux 6.2-rc4
  kbuild: Fix CFI hash randomization with KASAN
  firmware: coreboot: Check size of table entry and use flex-array
  kallsyms: Fix scheduling with interrupts disabled in self-test
  ata: pata_cs5535: Don't build on UML
  lockref: stop doing cpu_relax in the cmpxchg loop
  x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
  efi: tpm: Avoid READ_ONCE() for accessing the event log
  io_uring: lock overflowing for IOPOLL
  ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
  iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
  iommu/iova: Fix alloc iova overflows issue
  iommu: Fix refcount leak in iommu_device_claim_dma_owner
  iommu/arm-smmu-v3: Don't unregister on shutdown
  iommu/arm-smmu: Don't unregister on shutdown
  iommu/arm-smmu: Report IOMMU_CAP_CACHE_COHERENCY even betterer
  platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
  ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
  platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
  ...

Pull another io_uring fix from Jens Axboe:
 "Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Pull driver core fixes from Greg KH:
 "Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

 - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

 - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

 - Support GNU Make 4.4 for scripts/jobserver-exec.

 - Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature

We potentially have old hashes of the xattr names generated on systems
with signed 'char' types.  Now that everybody uses '-funsigned-char',
those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>