- 14 May, 2020 37 commits
-
-
Josh Poimboeuf authored
commit 06a9750e upstream. The PUSH_AND_CLEAR_REGS macro zeroes each register immediately after pushing it. If an NMI or exception hits after a register is cleared, but before the UNWIND_HINT_REGS annotation, the ORC unwinder will wrongly think the previous value of the register was zero. This can confuse the unwinding process and cause it to exit early. Because ORC is simpler than DWARF, there are a limited number of unwind annotation states, so it's not possible to add an individual unwind hint after each push/clear combination. Instead, the register clearing instructions need to be consolidated and moved to after the UNWIND_HINT_REGS annotation. Fixes: 3f01daec ("x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro") Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Jones <dsj@fb.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lore.kernel.org/r/68fd3d0bc92ae2d62ff7879d15d3684217d51f08.1587808742.git.jpoimboe@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiyu Yang authored
commit 6f91a3f7 upstream. batadv_v_ogm_process() invokes batadv_hardif_neigh_get(), which returns a reference of the neighbor object to "hardif_neigh" with increased refcount. When batadv_v_ogm_process() returns, "hardif_neigh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling paths of batadv_v_ogm_process(). When batadv_v_ogm_orig_get() fails to get the orig node and returns NULL, the refcnt increased by batadv_hardif_neigh_get() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out" label when batadv_v_ogm_orig_get() fails to get the orig node. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Xiyu Yang authored
commit 6107c5da upstream. batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(), which gets a batadv_hard_iface object from net_dev with increased refcnt and its reference is assigned to a local pointer 'hard_iface'. When batadv_store_throughput_override() returns, "hard_iface" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one error path of batadv_store_throughput_override(). When batadv_parse_throughput() returns NULL, the refcnt increased by batadv_hardif_get_by_netdev() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out" label when batadv_parse_throughput() returns NULL. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
Xiyu Yang authored
commit f872de81 upstream. batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(), which gets a batadv_hard_iface object from net_dev with increased refcnt and its reference is assigned to a local pointer 'hard_iface'. When batadv_show_throughput_override() returns, "hard_iface" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in the normal path of batadv_show_throughput_override(), which forgets to decrease the refcnt increased by batadv_hardif_get_by_netdev() before the function returns, causing a refcnt leak. Fix this issue by calling batadv_hardif_put() before the batadv_show_throughput_override() returns in the normal path. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
George Spelvin authored
commit fd0c42c4 upstream. and change to pseudorandom numbers, as this is a traffic dithering operation that doesn't need crypto-grade. The previous code operated in 4 steps: 1. Generate a random byte 0 <= rand_tq <= 255 2. Multiply it by BATADV_TQ_MAX_VALUE - tq 3. Divide by 255 (= BATADV_TQ_MAX_VALUE) 4. Return BATADV_TQ_MAX_VALUE - rand_tq This would apperar to scale (BATADV_TQ_MAX_VALUE - tq) by a random value between 0/255 and 255/255. But! The intermediate value between steps 3 and 4 is stored in a u8 variable. So it's truncated, and most of the time, is less than 255, after which the division produces 0. Specifically, if tq is odd, the product is always even, and can never be 255. If tq is even, there's exactly one random byte value that will produce a product byte of 255. Thus, the return value is 255 (511/512 of the time) or 254 (1/512 of the time). If we assume that the truncation is a bug, and the code is meant to scale the input, a simpler way of looking at it is that it's returning a random value between tq and BATADV_TQ_MAX_VALUE, inclusive. Well, we have an optimized function for doing just that. Fixes: 3c12de9a ("batman-adv: network coding - code and transmit packets if possible") Signed-off-by:
George Spelvin <lkml@sdf.org> Signed-off-by:
-
Sean Christopherson authored
Based on upstream commit f3689e3f. Save RCX, RDX and RSI to fake outputs to coerce the compiler into treating them as clobbered. RCX in particular is likely to be reused by the compiler to dereference the 'struct vcpu_vmx' pointer, which will result in a null pointer dereference now that RCX is zeroed by the asm blob. Tag the asm() blob as volatile to prevent GCC from dropping the blob, which is possible now that the blob has output values, all of which are unused. Upstream commit f3689e3f ("KVM: VMX: Save RSI to an unused output in the vCPU-run asm blob") is not a direct equivalent of this patch. As its shortlog states, it only tagged RSI as clobbered, whereas here RCX and RDX are also clobbered. In upstream at the time of the offending commit (b4be9803 in 4.19, 0e0ab73c upstream), the inline asm blob had previously been moved to a dedicated helper, __vmx_vcpu_run(). For unrelated reasons, __vmx_vcpu_run() was put into its own optimization unit, which for all intents and purposes made it impossible to consume clobbered registers because RCX, RDX and RSI are volatile and __vmx_vcpu_run() couldn't itself be inlined. In other words, the bug existed but couldn't be hit. Similarly, the lack of "volatile" was also a bug in upstream that was hidden by an unrelated change that exists in upstream but not in 4.19. In this case, the asm blob also uses ASM_CALL_CONSTRAINT (marks RSP as being an input/output constraint) in upstream to play nice with objtool due the blob making a CALL. In 4.19, there is no CALL and thus no ASM_CALL_CONSTRAINT. Furthermore, both of the lurking bugs were blasted away in upstream by commits 5e0781df ("KVM: VMX: Move vCPU-run code to a proper assembly routine") and fc2ba5a2 ("KVM: VMX: Call vCPU-run asm sub-routine from C and remove clobbering"), i.e. these bugs will never be directly fixed in upstream. Reported-by:
Tobias Urdin <tobias.urdin@binero.com> Fixes: b4be9803 ("KVM: VMX: Zero out *all* general purpose registers after VM-Exit") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit 051a2d3e upstream. Use '%% " _ASM_CX"' instead of '%0' to dereference RCX, i.e. the 'struct vcpu_vmx' pointer, in the VM-Enter asm blobs of vmx_vcpu_run() and nested_vmx_check_vmentry_hw(). Using the symbolic name means that adding/removing an output parameter(s) requires "rewriting" almost all of the asm blob, which makes it nearly impossible to understand what's being changed in even the most minor patches. Opportunistically improve the code comments. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Luis Chamberlain authored
commit 3740d93e upstream. Commit 64e90a8a ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()") added the optiont to disable all call_usermodehelper() calls by setting STATIC_USERMODEHELPER_PATH to an empty string. When this is done, and crashdump is triggered, it will crash on null pointer dereference, since we make assumptions over what call_usermodehelper_exec() did. This has been reported by Sergey when one triggers a a coredump with the following configuration: ``` CONFIG_STATIC_USERMODEHELPER=y CONFIG_STATIC_USERMODEHELPER_PATH="" kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e ``` The way disabling the umh was designed was that call_usermodehelper_exec() would just return early, without an error. But coredump assumes certain variables are set up for us when this happens, and calls ile_start_write(cprm.file) with a NULL file. [ 2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 2.819859] #PF: supervisor read access in kernel mode [ 2.820035] #PF: error_code(0x0000) - not-present page [ 2.820188] PGD 0 P4D 0 [ 2.820305] Oops: 0000 [#1] SMP PTI [ 2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ #7 [ 2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014 [ 2.821150] RIP: 0010:do_coredump+0xd80/0x1060 [ 2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8 0 0f 84 9c 01 00 00 44 [ 2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246 [ 2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a [ 2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000 [ 2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00 [ 2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0 [ 2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000 [ 2.824285] FS: 00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000 [ 2.824767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0 [ 2.825479] Call Trace: [ 2.825790] get_signal+0x11e/0x720 [ 2.826087] do_signal+0x1d/0x670 [ 2.826361] ? force_sig_info_to_task+0xc1/0xf0 [ 2.826691] ? force_sig_fault+0x3c/0x40 [ 2.826996] ? do_trap+0xc9/0x100 [ 2.827179] exit_to_usermode_loop+0x49/0x90 [ 2.827359] prepare_exit_to_usermode+0x77/0xb0 [ 2.827559] ? invalid_op+0xa/0x30 [ 2.827747] ret_from_intr+0x20/0x20 [ 2.827921] RIP: 0033:0x55e2c76d2129 [ 2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01 c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89 e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0 0 00 00 00 00 0f 1f 40 [ 2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246 [ 2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718 [ 2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001 [ 2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00 [ 2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040 [ 2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 2.829964] CR2: 0000000000000020 [ 2.830149] ---[ end trace ceed83d8c68a1bf1 ]--- ``` Cc: <stable@vger.kernel.org> # v4.11+ Fixes: 64e90a8a ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199795Reported-by:
Tony Vroon <chainsaw@gentoo.org> Reported-by:
Sergey Kvachonok <ravenexp@gmail.com> Tested-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20200416162859.26518-1-mcgrof@kernel.orgSigned-off-by:
-
Oscar Carter authored
commit 769acc36 upstream. Check the return value of gasket_get_bar_index function as it can return a negative one (-EINVAL). If this happens, a negative index is used in the "gasket_dev->bar_data" array. Addresses-Coverity-ID: 1438542 ("Negative array index read") Fixes: 9a69f508 ("drivers/staging: Gasket driver framework + Apex driver") Signed-off-by:
Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Richard Yeh <rcy@google.com> Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.comSigned-off-by:
-
David Hildenbrand authored
commit e84fe99b upstream. Without CONFIG_PREEMPT, it can happen that we get soft lockups detected, e.g., while booting up. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-next-20200331+ #4 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: __pageblock_pfn_to_page+0x134/0x1c0 Call Trace: set_zone_contiguous+0x56/0x70 page_alloc_init_late+0x166/0x176 kernel_init_freeable+0xfa/0x255 kernel_init+0xa/0x106 ret_from_fork+0x35/0x40 The issue becomes visible when having a lot of memory (e.g., 4TB) assigned to a single NUMA node - a system that can easily be created using QEMU. Inside VMs on a hypervisor with quite some memory overcommit, this is fairly easy to trigger. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416073417.5003-1-david@redhat.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mark Rutland authored
commit 027d0c71 upstream. The static analyzer in GCC 10 spotted that in huge_pte_alloc() we may pass a NULL pmdp into pte_alloc_map() when pmd_alloc() returns NULL: | CC arch/arm64/mm/pageattr.o | CC arch/arm64/mm/hugetlbpage.o | from arch/arm64/mm/hugetlbpage.c:10: | arch/arm64/mm/hugetlbpage.c: In function ‘huge_pte_alloc’: | ./arch/arm64/include/asm/pgtable-types.h:28:24: warning: dereference of NULL ‘pmdp’ [CWE-690] [-Wanalyzer-null-dereference] | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ | |arch/arm64/mm/hugetlbpage.c:232:10: | |./arch/arm64/include/asm/pgtable-types.h:28:24: | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ This can only occur when the kernel cannot allocate a page, and so is unlikely to happen in practice before other systems start failing. We can avoid this by bailing out if pmd_alloc() fails, as we do earlier in the function if pud_alloc() fails. Fixes: 66b3923a ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Kyrill Tkachov <kyrylo.tkachov@arm.com> Cc: <stable@vger.kernel.org> # 4.5.x- Cc: Will Deacon <will@kernel.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 0225fd5e upstream. In the unlikely event that a 32bit vcpu traps into the hypervisor on an instruction that is located right at the end of the 32bit range, the emulation of that instruction is going to increment PC past the 32bit range. This isn't great, as userspace can then observe this value and get a bit confused. Conversly, userspace can do things like (in the context of a 64bit guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0, set PC to a 64bit value, change PSTATE to AArch32-USR, and observe that PC hasn't been truncated. More confusion. Fix both by: - truncating PC increments for 32bit guests - sanitizing all 32bit regs every time a core reg is changed by userspace, and that PSTATE indicates a 32bit mode. Cc: stable@vger.kernel.org Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 1c32ca5d upstream. When deciding whether a guest has to be stopped we check whether this is a private interrupt or not. Unfortunately, there's an off-by-one bug here, and we fail to recognize a whole range of interrupts as being global (GICv2 SPIs 32-63). Fix the condition from > to be >=. Cc: stable@vger.kernel.org Fixes: abd72296 ("KVM: arm/arm64: Simplify active_change_prepare and plug race") Reported-by:
André Przywara <andre.przywara@arm.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 11f5efc3 upstream. x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu areas can be complex, to say the least. Mappings may happen at boot up, and if nothing synchronizes the page tables, those page mappings may not be synced till they are used. This causes issues for anything that might touch one of those mappings in the path of the page fault handler. When one of those unmapped mappings is touched in the page fault handler, it will cause another page fault, which in turn will cause a page fault, and leave us in a loop of page faults. Commit 763802b5 ("x86/mm: split vmalloc_sync_all()") split vmalloc_sync_all() into vmalloc_sync_unmappings() and vmalloc_sync_mappings(), as on system exit, it did not need to do a full sync on x86_64 (although it still needed to be done on x86_32). By chance, the vmalloc_sync_all() would synchronize the page mappings done at boot up and prevent the per cpu area from being a problem for tracing in the page fault handler. But when that synchronization in the exit of a task became a nop, it caused the problem to appear. Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home Cc: stable@vger.kernel.org Fixes: 737223fb ("tracing: Consolidate buffer allocation code") Reported-by:
"Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Suggested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Oliver Neukum authored
commit e9b3c610 upstream. We must not process packets shorter than a packet ID Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-and-tested-by: syzbot+d29e9263e13ce0b9f4fd@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 9f04db23 upstream. This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by:
Julian Groß <julian.g@posteo.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.comSigned-off-by:
-
Alan Stern authored
commit 0ed08fad upstream. The syzbot fuzzer discovered a bad race between in the usbhid driver between usbhid_stop() and usbhid_close(). In particular, usbhid_stop() does: usb_free_urb(usbhid->urbin); ... usbhid->urbin = NULL; /* don't mess up next start */ and usbhid_close() does: usb_kill_urb(usbhid->urbin); with no mutual exclusion. If the two routines happen to run concurrently so that usb_kill_urb() is called in between the usb_free_urb() and the NULL assignment, it will access the deallocated urb structure -- a use-after-free bug. This patch adds a mutex to the usbhid private structure and uses it to enforce mutual exclusion of the usbhid_start(), usbhid_stop(), usbhid_open() and usbhid_close() callbacks. Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jere Leppänen authored
commit 145cb2f7 upstream. When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them at the same time and in the correct order. This bundling was broken by commit 4ff40b86 ("sctp: set chunk transport correctly when it's a new asoc"), which assigns a transport for the COOKIE-ACK, but not for the SHUTDOWN. Fix this by passing a reference to the COOKIE-ACK chunk as an argument to sctp_sf_do_9_2_start_shutdown() and onward to sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same transport as the COOKIE-ACK chunk, which allows them to be bundled. In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was previously unused. Now that we're taking it into use, it must be a valid pointer to a chunk, or NULL. There is only one call site where it's not, in sctp_sf_autoclose_timer_expire(). Fix that too. Fixes: 4ff40b86 ("sctp: set chunk transport correctly when it's a new asoc") Signed-off-by:
Jere Leppänen <jere.leppanen@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jason Gerecke authored
commit 778fbf41 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: https://github.com/linuxwacom/input-wacom/issues/155 Fixes: 184eccd4 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 9274124f ] Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit c71c4e49 ] Fix the logic that sets the enable/disable flag for the source MAC filter according to firmware spec 1.7.1. In the original firmware spec. before 1.7.1, the VF spoof check flags were not latched after making the HWRM_FUNC_CFG call, so there was a need to keep the func_flags so that subsequent calls would perserve the VF spoof check setting. A change was made in the 1.7.1 spec so that the flags became latched. So we now set or clear the anti- spoof setting directly without retrieving the old settings in the stored vf->func_flags which are no longer valid. We also remove the unneeded vf->func_flags. Fixes: 8eb992e8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit bae361c5 ] Improve the slot reset sequence by disabling the device to prevent bad DMAs if slot reset fails. Return the proper result instead of always PCI_ERS_RESULT_RECOVERED to the caller. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit cece6f43 ] Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
[ Upstream commit f3cb3ceb ] mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
-
Michael Chan authored
[ Upstream commit c72cb303 ] The current logic in bnxt_fix_features() will inadvertently turn on both CTAG and STAG VLAN offload if the user tries to disable both. Fix it by checking that the user is trying to enable CTAG or STAG before enabling both. The logic is supposed to enable or disable both CTAG and STAG together. Fixes: 5a9f6b23 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.") Signed-off-by:
-
Tuong Lien authored
[ Upstream commit 980d6927 ] When an application connects to the TIPC topology server and subscribes to some services, a new connection is created along with some objects - 'tipc_subscription' to store related data correspondingly... However, there is one omission in the connection handling that when the connection or application is orderly shutdown (e.g. via SIGQUIT, etc.), the connection is not closed in kernel, the 'tipc_subscription' objects are not freed too. This results in: - The maximum number of subscriptions (65535) will be reached soon, new subscriptions will be rejected; - TIPC module cannot be removed (unless the objects are somehow forced to release first); The commit fixes the issue by closing the connection if the 'recvmsg()' returns '0' i.e. when the peer is shutdown gracefully. It also includes the other unexpected cases. Acked-by:
Jon Maloy <jmaloy@redhat.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit df4953e4 ] syzbot managed to set up sfq so that q->scaled_quantum was zero, triggering an infinite loop in sfq_dequeue() More generally, we must only accept quantum between 1 and 2^18 - 7, meaning scaled_quantum must be in [1, 0x7FFF] range. Otherwise, we also could have a loop in sfq_dequeue() if scaled_quantum happens to be 0x8000, since slot->allot could indefinitely switch between 0 and 0x8000. Fixes: eeaeb068 ("sch_sfq: allow big packets and be fair") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+0251e883fe39e7a0cb0a@syzkaller.appspotmail.com Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8738c85c ] If choke_init() could not allocate q->tab, we would crash later in choke_reset(). BUG: KASAN: null-ptr-deref in memset include/linux/string.h:366 [inline] BUG: KASAN: null-ptr-deref in choke_reset+0x208/0x340 net/sched/sch_choke.c:326 Write of size 8 at addr 0000000000000000 by task syz-executor822/7022 CPU: 1 PID: 7022 Comm: syz-executor822 Not tainted 5.7.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 __kasan_report.cold+0x5/0x4d mm/kasan/report.c:515 kasan_report+0x33/0x50 mm/kasan/common.c:625 check_memory_region_inline mm/kasan/generic.c:187 [inline] check_memory_region+0x141/0x190 mm/kasan/generic.c:193 memset+0x20/0x40 mm/kasan/common.c:85 memset include/linux/string.h:366 [inline] choke_reset+0x208/0x340 net/sched/sch_choke.c:326 qdisc_reset+0x6b/0x520 net/sched/sch_generic.c:910 dev_deactivate_queue.constprop.0+0x13c/0x240 net/sched/sch_generic.c:1138 netdev_for_each_tx_queue include/linux/netdevice.h:2197 [inline] dev_deactivate_many+0xe2/0xba0 net/sched/sch_generic.c:1195 dev_deactivate+0xf8/0x1c0 net/sched/sch_generic.c:1233 qdisc_graft+0xd25/0x1120 net/sched/sch_api.c:1051 tc_modify_qdisc+0xbab/0x1a00 net/sched/sch_api.c:1670 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5454 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 Fixes: 77e62da6 ("sch_choke: drop all packets in queue during reset") Signed-off-by:
-
Matt Jolly authored
[ Upstream commit 57c7f2bd ] Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c Signed-off-by:
Matt Jolly <Kangie@footclan.ninja> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2761121a ] Do not assume the attribute has the right size. Fixes: aea5f654 ("net/sched: add skbprio scheduler") Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 40e47307 ] When ENOSPC is set the idx is still valid and gets set to the global MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that ENOSPC is impossible from mlx4_cmd_imm() and gives this warning: drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized] 2552 | priv->def_counter[port] = idx; Also, when ENOSPC is returned mlx4_allocate_default_counters should not fail. Fixes: 6de5f7f6 ("net/mlx4_core: Allocate default counter per port") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Scott Dial authored
[ Upstream commit ab046a5d ] MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa8, and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by:
Scott Dial <scott@scottdial.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 14695212 ] My intent was to not let users set a zero drop_batch_size, it seems I once again messed with min()/max(). Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit 86530837 ] In this code, it appears that phyter_clocks is a list head, based on the previous list_for_each, and that clock->list is intended to be a list element, given that it has just been initialized in dp83640_clock_init. Accordingly, switch the arguments to list_add_tail, which takes the list head as the second argument. Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Nicolas Pitre authored
[ Upstream commit 57d38f26 ] By directly using kfree() in different places we risk missing one if it is switched to using vfree(), especially if the corresponding vmalloc() is hidden away within a common abstraction. Oh wait, that's exactly what happened here. So let's fix this by creating a common abstraction for the free case as well. Signed-off-by:
Nicolas Pitre <nico@fluxnic.net> Reported-by: syzbot+0bfda3ade1ee9288a1be@syzkaller.appspotmail.com Fixes: 9a98e7a8 ("vt: don't use kmalloc() for the unicode screen buffer") Cc: <stable@vger.kernel.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2005021043110.2671@knanqh.ubzrSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Masami Hiramatsu authored
[ Upstream commit dcbd21c9 ] Fix a typo that resulted in an unnecessary double initialization to addr. Link: http://lkml.kernel.org/r/158779374968.6082.2337484008464939919.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: c7411a1a ("tracing/kprobe: Check whether the non-suffixed symbol is notrace") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Matt Jolly authored
commit 78d6de3c upstream. Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by:
-
- 10 May, 2020 3 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Vetter authored
commit 26b1d3b5 upstream. The -modesetting ddx has a totally broken idea of how atomic works: - doesn't disable old connectors, assuming they get auto-disable like with the legacy setcrtc - assumes ASYNC_FLIP is wired through for the atomic ioctl - not a single call to TEST_ONLY Iow the implementation is a 1:1 translation of legacy ioctls to atomic, which is a) broken b) pointless. We already have bugs in both i915 and amdgpu-DC where this prevents us from enabling neat features. If anyone ever cares about atomic in X we can easily add a new atomic level (req->value == 2) for X to get back the shiny toys. Since these broken versions of -modesetting have been shipping, there's really no other way to get out of this bind. v2: - add an informational dmesg output (Rob, Ajax) - reorder after the DRIVER_ATOMIC check to avoid useless noise (Ilia) - allow req->value > 2 so that X can do another attempt at atomic in the future v3: Go with paranoid, insist that the X should be first (suggested by Rob) Cc: Ilia Mirkin <imirkin@alum.mit.edu> References: https://gitlab.freedesktop.org/xorg/xserver/issues/629 References: https://gitlab.freedesktop.org/xorg/xserver/merge_requests/180 References: abbc0697 ("drm/fb: revert the i915 Actually configure untiled displays from master") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1) Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1) Cc: Michel Dänzer <michel@daenzer.net> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Adam Jackson <ajax@redhat.com> Acked-by:
Adam Jackson <ajax@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Acked-by:
Rob Clark <robdclark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905185318.31363-1-daniel.vetter@ffwll.ch Cc: Yves-Alexis Perez <corsac@debian.org> Signed-off-by:
-
Jiri Slaby authored
commit 526f3d96 upstream. Commit 018d26fc ("cgroup, netclassid: periodically release file_lock on classid") added a second cond_resched to write_classid indirectly by update_classid_task. Remove the one in write_classid. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Dmitry Yakunin <zeil@yandex-team.ru> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
