Fix the following coccicheck warnings:

./arch/s390/include/asm/scsw.h:528:48-50: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Remove a superfluous semicolon after function definition.
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Message-Id: <20210125095839.1720265-1-cy.fan@huawei.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Currently zpci_create_device() is only called in clp_add_pci_device()
which allocates the memory for the struct zpci_dev being created. There
is little separation of concerns as only both functions together can
create a zpci_dev and the only CLP specific code in
clp_add_pci_device() is a call to clp_query_pci_fn().

Improve this by removing clp_add_pci_device() and refactor
zpci_create_device() such that it alone creates and initializes the
zpci_dev given the FID and Function Handle. For this we need to make
clp_query_pci_fn() non-static. While at it remove the function handle
parameter since we can just take that from the zpci_dev. Also move
adding to the zpci_list to after the zdev has been fully created which
eliminates a window where a partially initialized zdev can be found by
get_zdev_by_fid().
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

We currently track the time of the most recent QDIO Adapter Interrupt.
This is a system-wide timestamp (as such interrupts are not bound to
one specific qdio device).

If interrupt processing stalls on one device but is functional for a
different device, the timestamp continues to be updated and is of no
help for problem diagnosis.
So for debugging purposes also track the time of the last Data IRQ on
a per-device level. Collect this data in the legacy non-AI path as well.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

tiqdio_add_device() adds the device to the tiq_list of eligible targets
for a data IRQ, which gets walked on each QDIO Adapter Interrupt to
inspect their DSCIs.

But currently the tiqdio_add_device() / tiqdio_remove_device() calls
are not symmetric - the device is removed within qdio_shutdown(),
but only added by qdio_activate().
So depending on the call sequence and encountered errors, we might
be trying to remove a list entry in qdio_shutdown() that was never even
added to the list. This required additional INIT_LIST_HEAD() calls to
ensure that the list entry was always in a consistent state.

All drivers now fence the IRQ delivery via qdio_start_irq() /
qdio_stop_irq(), so we can nicely integrate this tiq_list management
with the other steps needed for QDIO Adapter IRQ (de-)registration
(qdio_establish_thinint() / qdio_shutdown_thinint()).
As the naming suggests these get called during qdio_establish() and
qdio_shutdown(), with proper symmetry and roll-back after errors.

With this we longer need to worry about misplaced list removals, and
thus can clean up the list API abuse (INIT_LIST_HEAD() should not be
called on list entries).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Convert the Output Queue tasklet code to take a tasklet_struct as
parameter. Then initialize the tasklet with tasklet_setup() to indicate
that we follow the new model.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

It's used in just one place, inline it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Both qeth and zfcp have fully moved to the polling-driven flow for
Input Queues with commit 0a6e6345 ("s390/qdio: extend polling
support to multiple queues") and commit 0b524abc ("scsi: zfcp: Lift
Input Queue tasklet from qdio").

So remove the tasklet code for Input Queues, streamline the IRQ handlers
and push the tasklet struct into struct qdio_output_q.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

A master key change on a CCA card may cause an immediately
following request to derive an protected key from a secure
key to fail with error condition 8/2290. The recommendation
from firmware is to retry with 1 second sleep.

So now the low level cca functions return -EAGAIN when this
error condition is seen and the paes retry function will
evaluate the return value. Seeing EAGAIN and running in
process context results in trying to sleep for 1 s now.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Checking zdev->zbus for NULL in __zpci_event_availability() is
superfluous as it can never be NULL at this point. While harmless this
check causes smatch warnings because we later access zdev->zbus with
only having checked zdev != NULL which is sufficient.

The reason zdev->zbus can never be NULL is since with zdev != NULL given
we know the zdev came from get_zdev_by_fid() and thus the zpci_list.
Now on first glance at zpci_create_device() one may assume that there is
a window where the zdev is in the list without a zdev, however this
window can't overlap with __zpci_event_availability() as
zpci_create_device() either runs on the same kthread as part of
availability events, or during the initial CLP List PCI at which point
the __zpci_event_availability() is not yet called as zPCI is not yet
initialized.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This fixes the following warning:

CHECK   linux/arch/s390/kernel/signal.c
linux/arch/s390/kernel/signal.c:465:6: warning: symbol 'arch_do_signal_or_restart' was not declared. Should it be static?
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Rename tape_3590_erp_succeded to tape_3590_erp_succeeded to fix a
spelling mistake in the function name.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20210118113222.71708-1-colin.king@canonical.comSigned-off-by: Vasily Gorbik <gor@linux.ibm.com>

Instead of fetching all registers from struct pt_regs and passing
them to the syscall wrappers, let the system call wrappers only
fetch the values really required.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

On s390 asmlinkage is a nop, so remove it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.

There are a few special things on s390:

- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
  know about our PIF flags in exit_to_user_mode_loop().

- The old code had several ways to restart syscalls:

  a) PIF_SYSCALL_RESTART, which was only set during execve to force a
     restart after upgrading a process (usually qemu-kvm) to pgste page
     table extensions.

  b) PIF_SYSCALL, which is set by do_signal() to indicate that the
     current syscall should be restarted. This is changed so that
     do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
     PIF_SYSCALL doesn't work with the generic code, and changing it
     to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
     more unique.

- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.

The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.

CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

clang does not know about the 'b1' construct used in bitops inline
assembly. Since the plan is to use compiler atomic builtins anyway
there is no point in requesting clang support for this. Especially if
one considers that the kernel seems to be the only user of this.

With removing this small optimization it is possible to compile the
kernel also with -march=zEC12 and higher using clang.

Build error:

In file included from ./include/linux/bitops.h:32:
./arch/s390/include/asm/bitops.h:69:4: error: invalid operand in inline asm: 'oi        $0,${1:b}'
                        "oi     %0,%b1\n"
                        ^
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

With commit f0cbd3b8 ("s390/atomic: circumvent gcc 10 build
regression") there was an attempt to workaroud a gcc build bug,
however with the workaround a similar problem with clang appeared.
It was recommended to use a workaround which would fail again with
gcc. Therefore simply remove the optimization. It is just not worth
the effort.

Besides that all of this will be changed to use compiler atomic
builtins instead anyway.

See https://reviews.llvm.org/D90231
and https://reviews.llvm.org/D91786Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Bypassing the DMA API is bad style, even when we don't expect any
actual problems. Let's utilize the right API helpers for setting the
DMA masks and check for returned errors, so that we benefit from
common sanity checks.

io_subchannel_allocate_dev() required some extra massaging, so that we
can return an errno other than -ENOMEM.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Set the bus type when initializing the cdev structure. The device core
won't act on it until we call device_add().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

On s390 cleared_pXs flags in struct mmu_gather are set by
corresponding pXd_free_tlb functions. Such approach is
inconsistent with how the generic code interprets these
flags, e.g pte_free_tlb() frees a PTE table - or a PMD
level entity, and so on.

This update does not bring any functional change, since
s390 does not use the flags at the moment.

Fixes: 9de7d833 ("s390/tlb: Convert to generic mmu_gather")
Link: https://lore.kernel.org/lkml/fbb00ac0-9104-8d25-f225-7b3d1b17a01f@huawei.com/Reported-by: Zhenyu Ye <yezhenyu2@huawei.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix 'CPU too large' error in Intel PT

 - Correct event attribute sizes in 'perf inject'

 - Sync build_bug.h and kvm.h kernel copies

 - Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example

 - libbpf tests fixes

 - Fix shadow stat 'perf test' for non-bash shells

 - Take cgroups into account for shadow stats in 'perf stat'

* tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf inject: Correct event attribute sizes
  perf intel-pt: Fix 'CPU too large' error
  perf stat: Take cgroups into account for shadow stats
  perf stat: Introduce struct runtime_stat_data
  libperf tests: Fail when failing to get a tracepoint id
  libperf tests: If a test fails return non-zero
  libperf tests: Avoid uninitialized variable warning
  perf test: Fix shadow stat test for non-bash shells
  tools headers: Syncronize linux/build_bug.h with the kernel sources
  tools headers UAPI: Sync kvm.h headers with the kernel sources
  perf bpf examples: Fix bpf.h header include directive in 5sec.c example

Pull powerpc fixes from Michael Ellerman:
 "One fix for a lack of alignment in our linker script, that can lead to
  crashes depending on configuration etc.

  One fix for the 32-bit VDSO after the C VDSO conversion.

  Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy"

* tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/vdso: Fix clock_gettime_fallback for vdso32
  powerpc: Fix alignment bug within the init sections

Pull misc vfs fixes from Al Viro:
 "Several assorted fixes.

  I still think that audit ->d_name race is better fixed this way for
  the benefit of backports, with any possibly fancier variants done on
  top of it"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  dump_common_audit_data(): fix racy accesses to ->d_name
  iov_iter: fix the uaccess area in copy_compat_iovec_from_user
  umount(2): move the flag validity checks first

So technically there is nothing wrong with adding a pinned page to the
swap cache, but the pinning obviously means that the page can't actually
be free'd right now anyway, so it's a bit pointless.

However, the real problem is not with it being a bit pointless: the real
issue is that after we've added it to the swap cache, we'll try to unmap
the page.  That will succeed, because the code in mm/rmap.c doesn't know
or care about pinned pages.

Even the unmapping isn't fatal per se, since the page will stay around
in memory due to the pinning, and we do hold the connection to it using
the swap cache.  But when we then touch it next and take a page fault,
the logic in do_swap_page() will map it back into the process as a
possibly read-only page, and we'll then break the page association on
the next COW fault.

Honestly, this issue could have been fixed in any of those other places:
(a) we could refuse to unmap a pinned page (which makes conceptual
sense), or (b) we could make sure to re-map a pinned page writably in
do_swap_page(), or (c) we could just make do_wp_page() not COW the
pinned page (which was what we historically did before that "mm:
do_wp_page() simplification" commit).

But while all of them are equally valid models for breaking this chain,
not putting pinned pages into the swap cache in the first place is the
simplest one by far.

It's also the safest one: the reason why do_wp_page() was changed in the
first place was that getting the "can I re-use this page" wrong is so
fraught with errors.  If you do it wrong, you end up with an incorrectly
shared page.

As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or
do_swap_page() would be a serious bug since it is only a (very good)
heuristic.  Re-using the page requires a hard black-and-white rule with
no room for ambiguity.

In contrast, saying "this page is very likely dma pinned, so let's not
add it to the swap cache and try to unmap it" is an obviously safe thing
to do, and if the heuristic might very rarely be a false positive, no
harm is done.

Fixes: 09854ba9 ("mm: do_wp_page() simplification")
Reported-and-tested-by: Martin Raiber <martin@urbackup.org>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Nine minor fixes, seven in drivers and two in the core SCSI disk
  driver (sd) which should be harmless involving removing an unused
  variable and quietening a spurious warning"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Remove obsolete variable in sd_remove()
  scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
  scsi: scsi_debug: Fix memleak in scsi_debug_init()
  scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility"
  scsi: qedi: Correct max length of CHAP secret
  scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
  scsi: ufs: Relocate flush of exceptional event
  scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
  scsi: ufs: Fix possible power drain during system suspend

We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us.  And it's possible for
old long name to be freed after rename, leading to UAF here.

Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull block fixes from Jens Axboe:
 "Just an nvme pull request via Christoph:

   - don't initialize hwmon for discover controllers (Sagi Grimberg)

   - fix iov_iter handling in nvme-tcp (Sagi Grimberg)

   - fix a preempt warning in nvme-tcp (Sagi Grimberg)

   - fix a possible NULL pointer dereference in nvme (Israel Rukshin)"

* tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
  nvme: don't intialize hwmon for discovery controllers
  nvme-tcp: fix possible data corruption with bio merges
  nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT
  nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY

Pull io_uring fixes from Jens Axboe:
 "We still have a pending fix for a cancelation issue, but it's still
  being investigated. In the meantime:

   - Dead mm handling fix (Pavel)

   - SQPOLL setup error handling (Pavel)

   - Flush timeout sequence fix (Marcelo)

   - Missing finish_wait() for one exit case"

* tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
  io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
  io_uring: flush timeouts that should already have expired
  io_uring: do sqo disable on install_fd error
  io_uring: fix null-deref in io_disable_sqo_submit
  io_uring: don't take files/mm for a dead task
  io_uring: drop mm and files after task_work_run

Pull RISC-V fixes from Palmer Dabbelt:
 "There are a few more fixes than a normal rc4, largely due to the
  bubble introduced by the holiday break:

   - return -ENOSYS for syscall number -1, which previously returned an
     uninitialized value.

   - ensure of_clk_init() has been called in time_init(), without which
     clock drivers may not be initialized.

   - fix sifive,uart0 driver to properly display the baud rate. A fix to
     initialize MPIE that allows interrupts to be processed during
     system calls.

   - avoid erronously begin tracing IRQs when interrupts are disabled,
     which at least triggers suprious lockdep failures.

   - workaround for a warning related to calling smp_processor_id()
     while preemptible. The warning itself is suprious on currently
     availiable systems.

   - properly include the generic time VDSO calls. A fix to our kasan
     address mapping. A fix to the HiFive Unleashed device tree, which
     allows the Ethernet PHY to be properly initialized by Linux (as
     opposed to relying on the bootloader).

   - defconfig update to include SiFive's GPIO driver, which is present
     on the HiFive Unleashed and necessary to initialize the PHY.

   - avoid allocating memory while initializing reserved memory.

   - avoid allocating the last 4K of memory, as pointers there alias
     with syscall errors.

  There are also two cleanups that should have no functional effect but
  do fix build warnings:

   - drop a duplicated definition of PAGE_KERNEL_EXEC.

   - properly declare the asm register SP shim.

   - cleanup the rv32 memory size Kconfig entry, to reflect the actual
     size of memory availiable"

* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix maximum allowed phsyical memory for RV32
  RISC-V: Set current memblock limit
  RISC-V: Do not allocate memblock while iterating reserved memblocks
  riscv: stacktrace: Move register keyword to beginning of declaration
  riscv: defconfig: enable gpio support for HiFive Unleashed
  dts: phy: add GPIO number and active state used for phy reset
  dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
  riscv: Fix KASAN memory mapping.
  riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
  riscv: cacheinfo: Fix using smp_processor_id() in preemptible
  riscv: Trace irq on only interrupt is enabled
  riscv: Drop a duplicated PAGE_KERNEL_EXEC
  riscv: Enable interrupts during syscalls with M-Mode
  riscv: Fix sifive serial driver
  riscv: Fix kernel time_init()
  riscv: return -ENOSYS for syscall -1

Turning a pinned page read-only breaks the pinning after COW.  Don't do it.

The whole "track page soft dirty" state doesn't work with pinned pages
anyway, since the page might be dirtied by the pinning entity without
ever being noticed in the page tables.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Turning page table entries read-only requires the mmap_sem held for
writing.

So stop doing the odd games with turning things from read locks to write
locks and back.  Just get the write lock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.

Fix this issue by limiting the memblock if available memory spans the
entire address space.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Currently, resource tree allocates memory blocks while iterating on the
list. It leads to following kernel warning because memblock allocation
also invokes memory block reservation API.

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795
__insert_resource+0x8e/0xd0
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.10.0-00022-ge20097fb37e2-dirty #549
[    0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50
[    0.000000]  gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20
[    0.000000]  t1 : 00000000 t2 : 00000000 s0 : c1c01f60
[    0.000000]  s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4
[    0.000000]  a2 : 80c12b15 a3 : 80402000 a4 : 80402000
[    0.000000]  a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600
[    0.000000]  s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80
[    0.000000]  s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c
[    0.000000]  s8 : 00000fff s9 : 80000200 s10: c1613b40
[    0.000000]  s11: 00000000 t3 : c1d4a000 t4 : ffffffff

This is also unnecessary as we can pre-compute the total memblocks required
for each memory region and allocate it before the loop. It save precious
boot time not going through memblock allocation code every time.

Fixes: 00ab027a ("RISC-V: Add kernel image sections to the resource tree")
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

sizeof needs to be called on the compat pointer, not the native one.

Fixes: 89cd35c5 ("iov_iter: transparently handle compat iovecs in import_iovec")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM-raid's raid1 discard limits so discards work.

 - Select missing Kconfig dependencies for DM integrity and zoned
   targets.

 - Four fixes for DM crypt target's support to optionally bypass kcryptd
   workqueues.

 - Fix DM snapshot merge supports missing data flushes before committing
   metadata.

 - Fix DM integrity data device flushing when external metadata is used.

 - Fix DM integrity's maximum number of supported constructor arguments
   that user can request when creating an integrity device.

 - Eliminate DM core ioctl logging noise when an ioctl is issued without
   required CAP_SYS_RAWIO permission.

* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: defer decryption to a tasklet if interrupts disabled
  dm integrity: fix the maximum number of arguments
  dm crypt: do not call bio_endio() from the dm-crypt tasklet
  dm integrity: fix flush with external metadata device
  dm: eliminate potential source of excessive kernel log noise
  dm snapshot: flush merged data before committing metadata
  dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
  dm crypt: do not wait for backlogged crypto request completion in softirq
  dm zoned: select CONFIG_CRC32
  dm integrity: select CRYPTO_SKCIPHER
  dm raid: fix discard limits for raid1

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: MAINTAINERS and mm (slub,
  pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure,
  and process_vm_access)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/process_vm_access.c: include compat.h
  mm,hwpoison: fix printing of page flags
  MAINTAINERS: add Vlastimil as slab allocators maintainer
  mm/hugetlb: fix potential missing huge page size info
  mm: migrate: initialize err in do_migrate_pages
  mm/vmalloc.c: fix potential memory leak
  arm/kasan: fix the array size of kasan_early_shadow_pte[]
  mm/memcontrol: fix warning in mem_cgroup_page_lruvec()
  mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
  mm, slub: consider rest of partial list if acquire_slab() fails

Pull rdma fixes from Jason Gunthorpe:
 "A fairly modest set of bug fixes, nothing abnormal from the merge
  window

  The ucma patch is a bit on the larger side, but given the regression
  was recently added I've opted to forward it to the rc stream.

   - Fix a ucma memory leak introduced in v5.9 while fixing the
     Syzkaller bugs

   - Don't fail when the xarray wraps for user verbs objects

   - User triggerable oops regression from the umem page size rework

   - Error unwind bugs in usnic, ocrdma, mlx5 and cma"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/cma: Fix error flow in default_roce_mode_store
  RDMA/mlx5: Fix wrong free of blue flame register on error
  IB/mlx5: Fix error unwinding when set_has_smi_cap fails
  RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()
  RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd()
  RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp
  RDMA/restrack: Don't treat as an error allocation ID wrapping
  RDMA/ucma: Do not miss ctx destruction steps in some cases