The initial memblock metadata is accessed from kernel image mapping. The
regions arrays need to "reallocated" from memblock and accessed through
linear mapping to cover more memblock regions. So the resizing should
not be allowed until linear mapping is ready. Note that there are
memblock allocations when building linear mapping.

This patch is similar to 24cc61d8 ("arm64: memblock: don't permit
memblock resizing until linear mapping is up").

In following log, many memblock regions are reserved before
create_linear_mapping_page_table(). And then it triggered reallocation
of memblock.reserved.regions and memcpy the old array in kernel image
mapping to the new array in linear mapping which caused a page fault.

[    0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6
[    0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000
[    0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae
[    0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c
[    0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128
[    0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff]
[    0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000
[    0.000000] Oops [#1]
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2 #66
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] epc : __memcpy+0x60/0xf8
[    0.000000]  ra : memblock_double_array+0x192/0x248
[    0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0
[    0.000000]  gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000
[    0.000000]  t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60
[    0.000000]  s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8
[    0.000000]  a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000
[    0.000000]  a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000
[    0.000000]  s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00
[    0.000000]  s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000
[    0.000000]  s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000
[    0.000000]  s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000
[    0.000000]  t5 : 000000008f003000 t6 : ff600000ffffd000
[    0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f
[    0.000000] [<ffffffff8081d214>] __memcpy+0x60/0xf8
[    0.000000] [<ffffffff80a3e1a2>] memblock_add_range.isra.14+0x12c/0x162
[    0.000000] [<ffffffff80a3e36a>] memblock_reserve+0x6e/0x8c
[    0.000000] [<ffffffff80a123fc>] memblock_alloc_range_nid+0xb8/0x128
[    0.000000] [<ffffffff80a1256a>] memblock_phys_alloc_range+0x5e/0x6a
[    0.000000] [<ffffffff80a04732>] alloc_pmd_fixmap+0x14/0x1c
[    0.000000] [<ffffffff80a0475a>] alloc_p4d_fixmap+0xc/0x14
[    0.000000] [<ffffffff80a04a36>] create_pgd_mapping+0x98/0x17c
[    0.000000] [<ffffffff80a04e9e>] create_linear_mapping_range.constprop.10+0xe4/0x112
[    0.000000] [<ffffffff80a05bb8>] paging_init+0x3ec/0x5ae
[    0.000000] [<ffffffff80a03354>] setup_arch+0xb2/0x576
[    0.000000] [<ffffffff80a00726>] start_kernel+0x72/0x57e
[    0.000000] Code: b303 0285 b383 0305 be03 0385 be83 0405 bf03 0485 (b023) 00ef
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

Fixes: 671f9a3e ("RISC-V: Setup initial page tables in two stages")
Signed-off-by: Woody Zhang <woodylab@foxmail.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/tencent_FBB94CE615C5CCE7701CD39C15CCE0EE9706@qq.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

With this configuration opened, the basic platform-independent s2idle is
provided by the sole "s2idle" string in `/sys/power/mem_sleep`.

At the end of s2idle, harts will hit the `wfi` instruction or enter the
SUSPENDED state through the sbi_cpuidle driver. The interrupt of possible
wakeup devices will be kept to wake the system up.

And platform-specific sleep states can be provided by future ACPI and
SBI SUSP extension support.
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230529101524.322076-1-songshuaishuai@tinylab.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add include of <vdso/vsyscall.h> to pull in the defition of vdso_data
to remove the following sparse warning:

arch/riscv/kernel/vdso.c:39:18: warning: symbol 'vdso_data' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20230616114357.159601-1-ben.dooks@codethink.co.ukSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This add a test to check if the kernel zero-initializes all V registers
after the first-use trap handler returns.

If V registers are not zero-initialized, then the test should fail one
out of several runs:

```
 root@sifive-fpga:~# ./v_initval_nolibc
 # vl = 256
 not ok 1 detect stale values on v-regesters
 0 0 0 0 0 0 0 0   0 0 0 0 0 0 0 0
 0 4c 41 4e 47 3d 43 0   50 41 54 48 3d 2f 75 73
 72 2f 6c 6f 63 61 6c 2f   73 62 69 6e 3a 2f 75 73
 72 2f 6c 6f 63 61 6c 2f   62 69 6e 3a 2f 75 73 72
 ff ff 81 0 0 0 0 0   0 0 0 0 0 0 0 0
```

Otherwise, the test passes without errors each run.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230627015556.12329-3-andy.chiu@sifive.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

If there is no context switch happens after we enable V for a process,
then we return to user space with whatever left on the CPU's V registers
accessible to the process. The leaked data could belong to another
process's V-context saved from last context switch, impacting process's
confidentiality on the system.

To prevent this from happening, we clear V registers by restoring
zero'd V context after turining on V.

Fixes: cd054837 ("riscv: Allocate user's vector context in the first-use trap")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230627015556.12329-2-andy.chiu@sifive.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The function irqentry_exit_to_user_mode() must be called with interrupt
disabled. The caller of do_trap_insn_illegal() also assumes running
without interrupts. So, we should turn off interrupts after
riscv_v_first_use_handler() returns.

Fixes: cd054837 ("riscv: Allocate user's vector context in the first-use trap")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230625155416.18629-1-andy.chiu@sifive.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Jisheng Zhang <jszhang@kernel.org> says:

When trying to run linux with various opensource riscv core on
resource limited FPGA platforms, for example, those FPGAs with less
than 16MB SDRAM, I want to save mem as much as possible. One of the
major technologies is kernel size optimizations, I found that riscv
does not currently support HAVE_LD_DEAD_CODE_DATA_ELIMINATION, which
passes -fdata-sections, -ffunction-sections to CFLAGS and passes the
--gc-sections flag to the linker.

This not only benefits my case on FPGA but also benefits defconfigs.
Here are some notable improvements from enabling this with defconfigs:

nommu_k210_defconfig:
   text    data     bss     dec     hex
1112009  410288   59837 1582134  182436     before
 962838  376656   51285 1390779  1538bb     after

rv32_defconfig:
   text    data     bss     dec     hex
8804455 2816544  290577 11911576 b5c198     before
8692295 2779872  288977 11761144 b375f8     after

defconfig:
   text    data     bss     dec     hex
9438267 3391332  485333 13314932 cb2b74     before
9285914 3350052  483349 13119315 c82f53     after

patch1 and patch2 are clean ups.
patch3 fixes a typo.
patch4 finally enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for riscv.

* b4-shazam-merge:
  riscv: disable HAVE_LD_DEAD_CODE_DATA_ELIMINATION for LLD
  riscv: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
  vmlinux.lds.h: use correct .init.data.* section name
  riscv: vmlinux-xip.lds.S: remove .alternative section
  riscv: move options to keep entries sorted
  riscv: Fix orphan section warnings caused by kernel/pi

Link: https://lore.kernel.org/r/20230523165502.2592-1-jszhang@kernel.orgSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

I get a few build failures along the lines of

./arch/riscv/include/uapi/asm/sigcontext.h:19:36: error: field ‘v_state’ has incomplete type
   19 |         struct __riscv_v_ext_state v_state;
      |                                    ^~~~~~~
./arch/riscv/include/uapi/asm/sigcontext.h:32:49: error: field ‘sc_extdesc’ has incomplete type
   32 |                 struct __riscv_extra_ext_header sc_extdesc;

The V structures in question are defined for !assembly, so let's just do
so for the others.

Fixes: 8ee0b418 ("riscv: signal: Add sigcontext save/restore for vector")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230619172101.18692-1-palmer@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This is included in the ISA manual, but it's pretty common for bits of
the ISA manual that are actually ABI to change.  So let's document it
explicitly.
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230619190142.26498-1-palmer@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Support for ACPI

 - Various cleanups to the ISA string parsing, including making them
   case-insensitive

 - Support for the vector extension

 - Support for independent irq/softirq stacks

 - Our CPU DT binding now has "unevaluatedProperties: false"

* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
  riscv: hibernate: remove WARN_ON in save_processor_state
  dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
  dt-bindings: riscv: cpus: add a ref the common cpu schema
  riscv: stack: Add config of thread stack size
  riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
  riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
  RISC-V: always report presence of extensions formerly part of the base ISA
  dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
  RISC-V: remove decrement/increment dance in ISA string parser
  RISC-V: rework comments in ISA string parser
  RISC-V: validate riscv,isa at boot, not during ISA string parsing
  RISC-V: split early & late of_node to hartid mapping
  RISC-V: simplify register width check in ISA string parsing
  perf: RISC-V: Limit the number of counters returned from SBI
  riscv: replace deprecated scall with ecall
  riscv: uprobes: Restore thread.bad_cause
  riscv: mm: try VMA lock-based page fault handling first
  riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
  RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
  RISC-V: Track ISA extensions per hart
  ...

Pull powerpc updates from Michael Ellerman:

 - Extend KCSAN support to 32-bit and BookE. Add some KCSAN annotations

 - Make ELFv2 ABI the default for 64-bit big-endian kernel builds, and
   use the -mprofile-kernel option (kernel specific ftrace ABI) for big
   endian ELFv2 kernels

 - Add initial Dynamic Execution Control Register (DEXCR) support, and
   allow the ROP protection instructions to be used on Power 10

 - Various other small features and fixes

Thanks to Aditya Gupta, Aneesh Kumar K.V, Benjamin Gray, Brian King,
Christophe Leroy, Colin Ian King, Dmitry Torokhov, Gaurav Batra, Jean
Delvare, Joel Stanley, Marco Elver, Masahiro Yamada, Nageswara R Sastry,
Nathan Chancellor, Naveen N Rao, Nayna Jain, Nicholas Piggin, Paul
Gortmaker, Randy Dunlap, Rob Herring, Rohan McLure, Russell Currey,
Sachin Sant, Timothy Pearson, Tom Rix, and Uwe Kleine-König.

* tag 'powerpc-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (76 commits)
  powerpc: remove checks for binutils older than 2.25
  powerpc: Fail build if using recordmcount with binutils v2.37
  powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory
  powerpc/iommu: Only build sPAPR access functions on pSeries
  powerpc: powernv: Annotate data races in opal events
  powerpc: Mark writes registering ipi to host cpu through kvm and polling
  powerpc: Annotate accesses to ipi message flags
  powerpc: powernv: Fix KCSAN datarace warnings on idle_state contention
  powerpc: Mark [h]ssr_valid accesses in check_return_regs_valid
  powerpc: qspinlock: Enforce qnode writes prior to publishing to queue
  powerpc: qspinlock: Mark accesses to qnode lock checks
  powerpc/powernv/pci: Remove last IODA1 defines
  powerpc/powernv/pci: Remove MVE code
  powerpc/powernv/pci: Remove ioda1 support
  powerpc: 52xx: Make immr_id DT match tables static
  powerpc: mpc512x: Remove open coded "ranges" parsing
  powerpc: fsl_soc: Use of_range_to_resource() for "ranges" parsing
  powerpc: fsl: Use of_property_read_reg() to parse "reg"
  powerpc: fsl_rio: Use of_range_to_resource() for "ranges" parsing
  macintosh: Use of_property_read_reg() to parse "reg"
  ...

For pid namespaces, struct pid uses a dynamically sized array member,
"numbers".  This was implemented using the ancient 1-element fake
flexible array, which has been deprecated for decades.

Replace it with a C99 flexible array, refactor the array size
calculations to use struct_size(), and address elements via indexes.
Note that the static initializer (which defines a single element) works
as-is, and requires no special handling.

Without this, CONFIG_UBSAN_BOUNDS (and potentially
CONFIG_FORTIFY_SOURCE) will trigger bounds checks:

  https://lore.kernel.org/lkml/20230517-bushaltestelle-super-e223978c1ba6@brauner

Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Reported-by: syzbot+ac3b41786a2d0565b6d5@syzkaller.appspotmail.com
[brauner: dropped unrelated changes and remove 0 with NULL cast]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - preliminary ClangBuiltLinux enablement

 - add support to clone a time namespace

 - add vector extensions support

 - add SMT (Simultaneous Multi-Threading) support

 - support dbar with different hints

 - introduce hardware page table walker

 - add jump-label implementation

 - add rethook and uprobes support

 - some bug fixes and other small changes

* tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits)
  LoongArch: Remove five DIE_* definitions in kdebug.h
  LoongArch: Add uprobes support
  LoongArch: Use larch_insn_gen_break() for kprobes
  LoongArch: Add larch_insn_gen_break() to generate break insns
  LoongArch: Check for AMO instructions in insns_not_supported()
  LoongArch: Move three functions from kprobes.c to inst.c
  LoongArch: Replace kretprobe with rethook
  LoongArch: Add jump-label implementation
  LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
  LoongArch: Export some arch-specific pm interfaces
  LoongArch: Introduce hardware page table walker
  LoongArch: Support dbar with different hints
  LoongArch: Add SMT (Simultaneous Multi-Threading) support
  LoongArch: Add vector extensions support
  LoongArch: Add support to clone a time namespace
  Makefile: Add loongarch target flag for Clang compilation
  LoongArch: Mark Clang LTO as working
  LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
  LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
  LoongArch: Tweak CFLAGS for Clang compatibility
  ...

As already mentioned in my merge message for the 'expand-stack' branch,
we have something like 24 different versions of the page fault path for
all our different architectures, all just _slightly_ different due to
various historical reasons (usually related to exactly when they
branched off the original i386 version, and the details of the other
architectures they had in their history).

And a few of them had some silly mistake in the conversion.

Most of the architectures call the faulting address 'address' in the
fault path.  But not all.  Some just call it 'addr'.  And if you end up
doing a bit too much copy-and-paste, you end up with the wrong version
in the places that do it differently.

In this case it was csky.

Fixes: a050ba1e ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull memblock updates from Mike Rapoport:

 - add test for memblock_alloc_node()

 - minor coding style fixes

 - add flags and nid info in memblock debugfs

* tag 'memblock-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Update nid info in memblock debugfs
  memblock: Add flags and nid info in memblock debugfs
  Fix some coding style errors in memblock.c
  Add tests for memblock_alloc_node()

In commit 8d7071af ("mm: always expand the stack with the mmap write
lock held") I tried to deal with the remaining odd page fault handling
cases.  The oddest one is ia64, which has stacks that grow both up and
down.  And because ia64 was _so_ odd, I asked people to verify the end
result.

But a close second oddity is parisc, which is the only one that has a
main stack growing up (our "CONFIG_STACK_GROWSUP" config option).  But
it looked obvious enough that I didn't worry about it.

I should have worried a bit more.  Not because it was particularly
complex, but because I just used the wrong variable name.

The previous vma isn't called "prev", it's called "prev_vma".  Blush.

Fixes: 8d7071af ("mm: always expand the stack with the mmap write lock held")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping updates from Christoph Hellwig:

 - swiotlb cleanups (Petr Tesarik)

 - use kvmalloc_array (gaoxu)

 - a small step towards removing is_swiotlb_active (Christoph Hellwig)

 - fix a Kconfig typo Sui Jingfeng)

* tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping:
  drm/nouveau: stop using is_swiotlb_active
  swiotlb: use the atomic counter of total used slabs if available
  swiotlb: remove unused field "used" from struct io_tlb_mem
  dma-remap: use kvmalloc_array/kvfree for larger dma memory remap
  dma-mapping: fix a Kconfig typo

Pull rdma updates from Jason Gunthorpe:
 "This cycle saw a focus on rxe and bnxt_re drivers:

   - Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma

   - rxe uses workqueues instead of tasklets

   - rxe has better compliance around access checks for MRs and rereg_mr

   - mana supportst he 'v2' FW interface for RX coalescing

   - hfi1 bug fix for stale cache entries in its MR cache

   - mlx5 buf fix to handle FW failures when destroying QPs

   - erdma HW has a new doorbell allocation mechanism for uverbs that is
     secure

   - Lots of small cleanups and rework in bnxt_re:
       - Use the common mmap functions
       - Support disassociation
       - Improve FW command flow
       - support for 'low latency push'"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits)
  RDMA/bnxt_re: Fix an IS_ERR() vs NULL check
  RDMA/bnxt_re: Fix spelling mistake "priviledged" -> "privileged"
  RDMA/bnxt_re: Remove duplicated include in bnxt_re/main.c
  RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc()
  RDMA/bnxt_re: Remove incorrect return check from slow path
  RDMA/bnxt_re: Enable low latency push
  RDMA/bnxt_re: Reorg the bar mapping
  RDMA/bnxt_re: Move the interface version to chip context structure
  RDMA/bnxt_re: Query function capabilities from firmware
  RDMA/bnxt_re: Optimize the bnxt_re_init_hwrm_hdr usage
  RDMA/bnxt_re: Add disassociate ucontext support
  RDMA/bnxt_re: Use the common mmap helper functions
  RDMA/bnxt_re: Initialize opcode while sending message
  RDMA/cma: Remove NULL check before dev_{put, hold}
  RDMA/rxe: Simplify cq->notify code
  RDMA/rxe: Fixes mr access supported list
  RDMA/bnxt_re: optimize the parameters passed to helper functions
  RDMA/bnxt_re: remove redundant cmdq_bitmap
  RDMA/bnxt_re: use firmware provided max request timeout
  RDMA/bnxt_re: cancel all control path command waiters upon error
  ...

Pull iommufd updates from Jason Gunthorpe:
 "Just two syzkaller fixes, both for the same basic issue: using the
  area pointer during an access forced unmap while the locks protecting
  it were let go"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Call iopt_area_contig_done() under the lock
  iommufd: Do not access the area pointer after unlocking

Pull iommu updates from Joerg Roedel:
 "Core changes:
   - iova_magazine_alloc() optimization
   - Make flush-queue an IOMMU driver capability
   - Consolidate the error handling around device attachment

  AMD IOMMU changes:
   - AVIC Interrupt Remapping Improvements
   - Some minor fixes and cleanups

  Intel VT-d changes from Lu Baolu:
   - Small and misc cleanups

  ARM-SMMU changes from Will Deacon:
   - Device-tree binding updates:
      - Add missing clocks for SC8280XP and SA8775 Adreno SMMUs
      - Add two new Qualcomm SMMUs in SDX75 and SM6375
   - Workarounds for Arm MMU-700 errata:
      - 1076982: Avoid use of SEV-based cmdq wakeup
      - 2812531: Terminate command batches with a CMD_SYNC
      - Enforce single-stage translation to avoid nesting-related errata
   - Set the correct level hint for range TLB invalidation on teardown

  .. and some other minor fixes and cleanups (including Freescale PAMU
  and virtio-iommu changes)"

* tag 'iommu-updates-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (50 commits)
  iommu/vt-d: Remove commented-out code
  iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one()
  iommu/vt-d: Handle the failure case of dmar_reenable_qi()
  iommu/vt-d: Remove unnecessary (void*) conversions
  iommu/amd: Remove extern from function prototypes
  iommu/amd: Use BIT/BIT_ULL macro to define bit fields
  iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro
  iommu/amd: Fix compile error for unused function
  iommu/amd: Improving Interrupt Remapping Table Invalidation
  iommu/amd: Do not Invalidate IRT when IRTE caching is disabled
  iommu/amd: Introduce Disable IRTE Caching Support
  iommu/amd: Remove the unused struct amd_ir_data.ref
  iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga()
  iommu/arm-smmu-v3: Set TTL invalidation hint better
  iommu/arm-smmu-v3: Document nesting-related errata
  iommu/arm-smmu-v3: Add explicit feature for nesting
  iommu/arm-smmu-v3: Document MMU-700 erratum 2812531
  iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982
  dt-bindings: arm-smmu: Add SDX75 SMMU compatible
  dt-bindings: arm-smmu: Add SM6375 GPU SMMU
  ...

The sparc32 conversion to lock_mm_and_find_vma() in commit a050ba1e
("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
missed the fact that we didn't actually have a 'regs' pointer available
in the 'force_user_fault()' case.

It's there in the regular page fault path ("do_sparc_fault()"), but not
the window underflow/overflow paths.

Which is all fine - we can just pass in a NULL pointer.  The register
state is only used to avoid deadlock with kernel faults, which is not
the case for any of these register window faults.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a050ba1e ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sysctl fix from Luis Chamberlain:
 "A missed minor fix which Matthieu Baerts noted I had not picked up"

* tag 'sysctl-6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: fix unused proc_cap_handler() function warning

Pull mm fix from David Woodhouse:
 "Fix error return from do_vmi_align_munmap()"

* tag 'unmap-fix-20230629' of git://git.infradead.org/users/dwmw2/linux:
  mm/mmap: Fix error return in do_vmi_align_munmap()

Pull tracing fix from Steven Rostedt:
 "Fix user event write on buffer disabled.

  The user events write currently returns the size of what was supposed
  to be written when tracing is disabled and nothing was written.

  Instead, behave like trace_marker and return -EBADF, as that is what
  is returned if a file is opened for read only, and a write is
  performed on it. Writing to the buffer that is disabled is like trying
  to write to a file opened for read only, as the buffer still can be
  read, but just not written to.

  This also includes test cases for this use case"

* tag 'trace-v6.4-rc7-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  selftests/user_events: Add test cases when event is disabled
  selftests/user_events: Enable the event before write_fault test in ftrace self-test
  tracing/user_events: Fix incorrect return value for writing operation when events are disabled

Pull ACPI fix from Rafael Wysocki:
 "Fix suspend-to-idle breakage on multiple systems introduced by one of
  the recent commits that may cause the affected systems to overheat
  while suspended"

* tag 'acpi-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Fix acpi_ec_dispatch_gpe()

The objtool merge in commit 6f612579 ("Merge tag 'objtool-core ...")
generated a semantic conflict that was not resolved.

The btrfs_assertfail() entry was removed from the noreturn list in
commit b831306b ("btrfs: print assertion failure report and stack
trace from the same line") because btrfs_assertfail() was changed from a
noreturn function into a macro.

The noreturn list was then moved from check.c to noreturns.h in commit
6245ce4a ("objtool: Move noreturn function list to separate file"),
and should be removed from that post-merge as well.

Do it explicitly.

Cc: David Sterba <dsterba@suse.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull slab updates from Vlastimil Babka:

 - SLAB deprecation:

   Following the discussion at LSF/MM 2023 [1] and no objections, the
   SLAB allocator is deprecated by renaming the config option (to make
   its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
   SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
   also updated.

 - SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):

   There are (very limited) cases where kmem_cache merging is
   undesirable, and existing ways to prevent it are hacky. Introduce a
   new flag to do that cleanly and convert the existing hacky users.
   Btrfs plans to use this for debug kernel builds (that use case is
   always fine), networking for performance reasons (that should be very
   rare).

 - Replace the usage of weak PRNGs (David Keisar Schmidt):

   In addition to using stronger RNGs for the security related features,
   the code is a bit cleaner.

 - Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
   zhaoxinchao)

Link: https://lwn.net/Articles/932201/ [1]

* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
  mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
  mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
  mm/slab_common: reduce an if statement in create_cache()
  mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
  mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
  mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
  mm/slab_common: Replace invocation of weak PRNG
  mm/slab: Replace invocation of weak PRNG
  slub: Don't read nr_slabs and total_objects directly
  slub: Remove slabs_node() function
  slub: Remove CONFIG_SMP defined check
  slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
  slub: Correct the error code when slab_kset is NULL
  mm/slab: correct return values in comment for _kmem_cache_create()

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly minor cleanups and bugfixes that address harmless
  problems.

  The largest branch is a conversion of the omap platform to use GPIO
  descriptors throughout the tree, for any devices that are not fully
  converted to devicetree.

  The Samsung Exynos platform gains back support for the Exynos4212 chip
  that was previously unused and removed but is now used for the Samsung
  Galaxy Tab3"

* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: omap2: Fix copy/paste bug
  MAINTAINERS: Replace my email address
  Input: ads7846 - fix pointer cast warning
  Input: ads7846 - Fix usage of match data
  ARM: omap2: Fix checkpatch issues
  arm: omap1: replace printk() with pr_err macro
  ARM: omap: Fix checkpatch issues
  ARM: s3c: Switch i2c drivers back to use .probe()
  ARM: versatile: mark mmc_status() static
  ARM: spear: include "pl080.h" for pl080_get_signal() prototype
  ARM: sa1100: address missing prototype warnings
  ARM: pxa: fix missing-prototypes warnings
  ARM: orion5x: fix d2net gpio initialization
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: omap1: add missing include
  ARM: lpc32xx: add missing include
  ARM: imx: add missing include
  ARM: highbank: add missing include
  ARM: ep93xx: fix missing-prototype warnings
  ARM: davinci: fix davinci_cpufreq_init() declaration
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "The arm64 defconfig file gets the usual updates to enable addition
  device drivers as well as the sparx5 and realtek SoC platforms.

  For arm32, there are only a couple of cleanup patches for imx, renesas
  and rockchips"

* tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  arm64: defconfig: Enable Rockchip I2S TDM and ES8316 drivers
  arm64: defconfig: update RK8XX MFD config
  ARM: multi_v7_defconfig: update MFD_RK808 name
  arm64: defconfig: Enable UBIFS
  arm64: defconfig: enable drivers for Verdin AM62
  arm64: defconfig: Build SM6115 display and GPU clock controller drivers
  arm64: defconfig: Build display clock controller driver for QCM2290
  arm64: defconfig: Build interconnect driver for QCM2290
  arm64: defconfig: Build Global Clock Controller driver for QCM2290
  arm64: defconfig: Build MSM power manager driver
  arm64: defconfig: Enable sc828x0xp lpasscc clock controller
  arm64: defconfig: Enable the TI SN65DSI83 driver
  arm64: defconfig: Enable Renesas MTU3a counter config
  arm64: defconfig: enable Mediatek PMIC key
  arm64: defconfig: enable MT6357 regulator
  ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config
  arm64: defconfig: Enable ipq6018 apss clock and PLL controller
  arm64: defconfig: Enable ARCH_SPARX5 and ARCH_REALTEK
  arm64: defconfig: enable FSA4480 driver as module
  ARM: shmobile: defconfig: Refresh for v6.4-rc1
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Nothing surprising in the SoC specific drivers, with the usual
  updates:

   - Added or improved SoC driver support for Tegra234, Exynos4121,
     RK3588, as well as multiple Mediatek and Qualcomm chips

   - SCMI firmware gains support for multiple SMC/HVC transport and
     version 3.2 of the protocol

   - Cleanups amd minor changes for the reset controller, memory
     controller, firmware and sram drivers

   - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
     amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
  dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
  MAINTAINERS: add PHY-related files to Amlogic SoC file list
  drivers: meson: secure-pwrc: always enable DMA domain
  tee: optee: Use kmemdup() to replace kmalloc + memcpy
  soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
  dt-bindings: sram: qcom,imem: document qdu1000
  soc: qcom: icc-bwmon: Fix MSM8998 count unit
  dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  soc: qcom: socinfo: Add support for new fields in revision 19
  soc: qcom: socinfo: Add support for new fields in revision 18
  dt-bindings: firmware: scm: Add compatible for SDX75
  soc: qcom: mdt_loader: Fix split image detection
  dt-bindings: memory-controllers: drop unneeded quotes
  soc: rockchip: dtpm: use C99 array init syntax
  firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
  soc/tegra: pmc: Use devm_clk_notifier_register()
  soc/tegra: pmc: Simplify debugfs initialization
  ...

Since usermodehelper_table() is marked static now, we get a
warning about it being unused when SYSCTL is disabled:

kernel/umh.c:497:12: error: 'proc_cap_handler' defined but not used [-Werror=unused-function]

Just move it inside of the same #ifdef.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Fixes: 861dc0b4 ("sysctl: move umh sysctl registration to its own file")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
[mcgrof: adjust new commit ID for Fixes tag]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull new ARM SoC support from Arnd Bergmann:
 "There are two new SoC families this time, and both appear fairly
  similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
  both dual-core Cortex-A35 based chips for the low-power industrial
  embedded market, and they mark the first 64-bit product in a widely
  used family of 32-bit Arm MCUs and SoCs.

  The way into the kernel is completely different here: The team at ST
  has a long history of working upstream with their STM32MP1 and other
  SoCs, and they produced a complete port to arm64 together with the
  initial announcement. Nuvoton also has multiple SoC product lines with
  current or previous upstream support, but those are maintained by
  third parties and are unrelated. The patch series from Nuvoton's Jacky
  Huang had to go through many revisisions to get to this point and is
  still missing a few drivers including the serial port for the moment.

  The branch contains the devicetree files as well as all the code
  changes, in order to have something that can be tested standalone"

* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  clk: nuvoton: Use clk_parent_data instead of string for parent clock
  clk: nuvoton: Update all constant hex values to lowercase
  clk: nuvoton: Add clk-ma35d1.h for driver extern functions
  remoteproc: stm32: use correct format strings on 64-bit
  MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
  arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
  arm64: dts: st: add stm32mp257f-ev1 board support
  dt-bindings: stm32: document stm32mp257f-ev1 board
  arm64: dts: st: introduce stm32mp25 pinctrl files
  arm64: dts: st: introduce stm32mp25 SoCs family
  arm64: introduce STM32 family on Armv8 architecture
  dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
  pinctrl: stm32: add stm32mp257 pinctrl support
  dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
  Documentation/process: add soc maintainer handbook
  reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
  reset: Add Nuvoton ma35d1 reset driver support
  clk: nuvoton: Add clock driver for ma35d1 clock controller
  arm64: dts: nuvoton: Add initial ma35d1 device tree
  dt-bindings: serial: Document ma35d1 uart controller
  ...

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "The biggest change this time is for the 32-bit devicetree files, which
  are all moved to a new location, using separate subdirectories for
  each SoC vendor, following the same scheme that is used on arm64, mips
  and riscv. This has been discussed for many years, but so far we never
  did this as there was a plan to move the files out of the kernel
  entirely, which has never happened.

  The impact of this will be that all external patches no longer apply,
  and anything depending on the location of the dtb files in the build
  directory will have to change. The installed files after 'make
  dtbs_install' keep the current location.

  There are six added SoCs here that are largely variants of previously
  added chips. Two other chips are added in a separate branch along with
  their device drivers.

   - The Samsung Exynos 4212 makes its return after the Samsung Galaxy
     Express phone is addded at last. The SoC support was originally
     added in 2012 but removed again in 2017 as it was unused at the
     time.

   - Amlogic C3 is a Cortex-A35 based smart IP camera chip

   - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
     the still common MSM8916 (Snapdragon 410) phone chip that has been
     supported for a long time.

   - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
     laptop chips, used in the Lenovo Flex 5G, which is added along with
     the reference board.

   - Qualcomm SDX75 is the latest generation modem chip that is used as
     a peripherial in phones but can also run a standalone Linux. Unlike
     the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

   - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
     Xuantie C910 core, a step up from all previously added rv64 chips.

  All of the above come with reference board implementations, those
  included there are 39 new board files, but only five more 32-bit this
  time, probably a new low:

   - Marantec Maveo board based on dhcor imx6ull module

   - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

   - Epson Moverio BT-200 AR glasses based on TI OMAP4

   - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

   - ICnova ADB4006 board based on Allwinner A20

  On the 64-bit side, there are also fewer addded machines than we had
  in the recent releases:

   - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
     EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

   - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

   - Qualcomm gains support for 6 reference boards on various members of
     their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
     phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
     of the various reference platforms for their new chips.

   - Rockchips support for several newer boards: Indiedroid Nova
     (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
     NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
     Fastrhino R66S/R68S (rk3568)

   - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
     Verdin family with AM62 COM, carrier and dev boards

  Other changes to existing boards contain the usual minor improvements
  along with

   - continued updates to clean up dts files based on dtc warnings and
     binding checks, in particular cache properties and node names

   - support for devicetree overlays on at91, bcm283x

   - significant additions to existing SoC support on mediatek,
     qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
     STM32MP1

  As usual, a lot more detail is available in the individual merge
  commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
  ARM: mvebu: fix unit address on armada-390-db flash
  ARM: dts: Move .dts files to vendor sub-directories
  kbuild: Support flat DTBs install
  ARM: dts: Add .dts files missing from the build
  ARM: dts: allwinner: Use quoted #include
  ARM: dts: lan966x: kontron-d10: add PHY interrupts
  ARM: dts: lan966x: kontron-d10: fix SPI CS
  ARM: dts: lan966x: kontron-d10: fix board reset
  ARM: dts: at91: Enable device-tree overlay support for AT91 boards
  arm: dts: Enable device-tree overlay support for AT91 boards
  arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
  ARM: dts: at91: use generic name for shutdown controller
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for TP-Link HC220 G5 v1

 - add support for Wifi/Bluetooth on CI20

 - rework Ralink clock and reset handling

 - cleanups and fixes

* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
  MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
  MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
  MIPS: OCTEON: octeon-usb: cleanup divider calculation
  MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
  MIPS: OCTEON: octeon-usb: move gpio config to separate function
  MIPS: OCTEON: octeon-usb: use bitfields for shim register
  MIPS: OCTEON: octeon-usb: use bitfields for host config register
  MIPS: OCTEON: octeon-usb: use bitfields for control register
  MIPS: OCTEON: octeon-usb: add all register offsets
  mips: ralink: match all supported system controller compatible strings
  MIPS: dec: prom: Address -Warray-bounds warning
  MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
  clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
  mips: ralink: introduce commonly used remap node function
  mips: pci-mt7620: use dev_info() to log PCIe device detection result
  mips: pci-mt7620: do not print NFTS register value as error log
  MAINTAINERS: add Mediatek MTMIPS Clock maintainer
  mips: ralink: get cpu rate from new driver code
  mips: ralink: remove reset related code
  mips: ralink: mt7620: remove clock related code
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Add some missing type definitions to properties

   - Drop unneeded quotes and use absolute paths in bindings

   - Remove redundant "binding" or "schema" in binding titles

   - Add bindings for Ralink SoCs interrupt controller, QCA2066
     Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
     lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
     ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52

  DT core:

   - Improve the reserved-memory range allocation to maximize contiguous
     space

   - Use device_set_node() helper in place of open coding"

* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
  dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
  dt-bindings: PCI: dwc: rockchip: Update for RK3588
  dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
  dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
  dt-bindings: pwm: drop unneeded quotes
  dt-bindings: crypto: drop unneeded quotes
  dt-bindings: arm: socionext: add Synquacer platforms
  dt-bindings: connector: usb: allow a single HS port
  dt-bindings: bus: ti-sysc: fix typo
  of: reserved_mem: Use stable allocation order
  of: reserved_mem: Try to keep range allocations contiguous
  dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
  dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
  dt-bindings: dvfs: drop unneeded quotes
  dt-bindings: gpu: drop unneeded quotes
  dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
  dt-bindings: rockchip: grf: drop unneeded quotes
  dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
  dt-bindings: Remove last usage of "binding" or "schema" in titles
  dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
  ...

Pull misc filesystem updates from Jan Kara:

 - Rewrite kmap_local() handling in ext2

 - Convert ext2 direct IO path to iomap (with some infrastructure tweaks
   associated with that)

 - Convert two boilerplate licenses in udf to SPDX identifiers

 - Other small udf, ext2, and quota fixes and cleanups

* tag 'fs_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix uninitialized array access for some pathnames
  ext2: Drop fragment support
  quota: fix warning in dqgrab()
  quota: Properly disable quotas when add_dquot_ref() fails
  fs: udf: udftime: Replace LGPL boilerplate with SPDX identifier
  fs: udf: Replace GPL 2.0 boilerplate license notice with SPDX identifier
  fs: Drop wait_unfrozen wait queue
  ext2_find_entry()/ext2_dotdot(): callers don't need page_addr anymore
  ext2_{set_link,delete_entry}(): don't bother with page_addr
  ext2_put_page(): accept any pointer within the page
  ext2_get_page(): saner type
  ext2: use offset_in_page() instead of open-coding it as subtraction
  ext2_rename(): set_link and delete_entry may fail
  ext2: Add direct-io trace points
  ext2: Move direct-io to use iomap
  ext2: Use generic_buffers_fsync() implementation
  ext4: Use generic_buffers_fsync_noflush() implementation
  fs/buffer.c: Add generic_buffers_fsync*() implementation
  ext2/dax: Fix ext2_setsize when len is page aligned

Pull fsnotify updates from Jan Kara:

 - Support for fanotify events returning file handles for filesystems
   not exportable via NFS

 - Improved error handling exportfs functions

 - Add missing FS_OPEN events when unusual open helpers are used

* tag 'fsnotify_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: move fsnotify_open() hook into do_dentry_open()
  exportfs: check for error return value from exportfs_encode_*()
  fanotify: support reporting non-decodeable file handles
  exportfs: allow exporting non-decodeable file handles to userspace
  exportfs: add explicit flag to request non-decodeable file handles
  exportfs: change connectable argument to bit flags

Pull dlm updates from David Teigland:
 "The dlm posix lock handling (for gfs2) has three notable changes:

   - Local pids returned from GETLK are no longer negated. A previous
     patch negating remote pids mistakenly changed local pids also.

   - SETLKW operations can now be interrupted only when the process is
     killed, and not from other signals. General interruption was
     resulting in previously acquired locks being cleared, not just the
     in-progress lock. Handling this correctly will require extending a
     cancel capability to user space (a future feature.)

   - If multiple threads are requesting posix locks (with SETLKW), fix
     incorrect matching of results to the requests.

  The dlm networking has several minor cleanups, and one notable change:

   - Avoid delaying ack messages for too long (used for message
     reliability), resulting in a backlog of un-acked messages. These
     could previously be delayed as a result of either too many or too
     few other messages being sent. Now an upper and lower threshold is
     used to determine when an ack should be sent"

* tag 'dlm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: remove filter local comms on close
  fs: dlm: add send ack threshold and append acks to msgs
  fs: dlm: handle sequence numbers as atomic
  fs: dlm: handle lkb wait count as atomic_t
  fs: dlm: filter ourself midcomms calls
  fs: dlm: warn about messages from left nodes
  fs: dlm: move dlm_purge_lkb_callbacks to user module
  fs: dlm: cleanup STOP_IO bitflag set when stop io
  fs: dlm: don't check othercon twice
  fs: dlm: unregister memory at the very last
  fs: dlm: fix missing pending to false
  fs: dlm: clear pending bit when queue was empty
  fs: dlm: revert check required context while close
  fs: dlm: fix mismatch of plock results from userspace
  fs: dlm: make F_SETLK use unkillable wait_event
  fs: dlm: interrupt posix locks only when process is killed
  fs: dlm: fix cleanup pending ops when interrupted
  fs: dlm: return positive pid value for F_GETLK
  dlm: Replace all non-returning strlcpy with strscpy

Pull xfs updates from Darrick Wong:
 "There's not much going on this cycle -- the large extent counts
  feature graduated, so now users can create more extremely fragmented
  files! :P

  The rest are bug fixes; and I'll be sending more next week.

   - Fix a problem where shrink would blow out the space reserve by
     declining to shrink the filesystem

   - Drop the EXPERIMENTAL tag for the large extent counts feature

   - Set FMODE_CAN_ODIRECT and get rid of an address space op

   - Fix an AG count overflow bug in growfs if the new device size is
     redonkulously large"

* tag 'xfs-6.5-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix ag count overflow during growfs
  xfs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  xfs: drop EXPERIMENTAL tag for large extent counts
  xfs: don't deplete the reserve pool when trying to shrink the fs

Pull ext4 updates from Ted Ts'o:
 "Various cleanups and bug fixes in ext4's extent status tree,
  journalling, and block allocator subsystems.

  Also improve performance for parallel DIO overwrites"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits)
  ext4: avoid updating the superblock on a r/o mount if not needed
  jbd2: skip reading super block if it has been verified
  ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
  ext4: refactoring to use the unified helper ext4_quotas_off()
  ext4: turn quotas off if mount failed after enabling quotas
  ext4: update doc about journal superblock description
  ext4: add journal cycled recording support
  jbd2: continue to record log between each mount
  jbd2: remove j_format_version
  jbd2: factor out journal initialization from journal_get_superblock()
  jbd2: switch to check format version in superblock directly
  jbd2: remove unused feature macros
  ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev'
  ext4: Fix reusing stale buffer heads from last failed mounting
  ext4: allow concurrent unaligned dio overwrites
  ext4: clean up mballoc criteria comments
  ext4: make ext4_zeroout_es() return void
  ext4: make ext4_es_insert_extent() return void
  ext4: make ext4_es_insert_delayed_block() return void
  ext4: make ext4_es_remove_extent() return void
  ...