This member of the private data is not ued by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is always set to I8254_OSC_BASE_10MHZ. Remove
it from the private data and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define enables code that checks for analog input channel dropout
when reading samples. The define is enabled so we might as well always
enable the code and remove the define.

Factor out the common channel dropout detect code as a helper function
and cleanup the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename the helper functions that are called by
the interrupt function to handle reading the analog input samples.

Also, change the parameters to the helpers to the comedi_device
and comedi_subdevice pointers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function so it has namespace associated
with the driver.

Change the parameters to the function. The 'mode' is really a flag to
load the counters and the divisors can be found in the private data.

To clarify the code and remove the magic numbers, use the 8253.h
helpers to set the timer mode and load the counters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The local variable 'mode' is not necessary. We can determine the mode
by checking the cmd->convert_src and cmd->start_src. Do this instead
to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the cmd->convert_src == TRIG_TIMER the divisors needed to
generate the pacer time are calculated in the (*do_cmdtest) to
validate the cmd->convert_arg. The core always does the (*do_cmdtest)
before the (*do_cmd) so there is no reason to recalc the divisors.

Save the calculated divisors in the private data as 'next_divisor[12]'.
The (*do_cmd) then transfers them to the private data 'divisor[12]' so
that they can be used to set the timer for the command immediately or
later when the cmd->start_src is TRIG_EXT (mode 2 in this driver).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is is not necessary. We can just check the
cmd->flags for TRIG_WAKE_EOS when needed. Remvoe the member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to 0 but never used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is not necessary. We can determine if
the analog input command is neverending by checking the cmd->stop_src:

  TRIG_COUNT -> !neverending_ai
  TRIG_NONE -> neverending_ai

Do that instead and remove the unnecessary member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The chanlist is checked in Step 5 of the (*do_cmdtest) there is no
reason to check it again in the (*do_cmd). The only reason its done
again is to get the actual 'seglen', the non-repeating length of the
chanlist.

Save the 'seglen' found by pci171x_ai_check_chanlist() in the private
data and use that in the (*do_cmd). Rename the private data member to
clarify it. Also, remove the unused 'act_chanlist_pos' member from the
private data.

Refactor the error handling in pci171x_ai_check_chanlist() so it returns
and errno for failure and 0 for success.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up this function to clarify what the chanlist is being checked for.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to fix coding style
warnings found by checkpatch.pl tool
Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The i_IorangeBase1, i_PCIEeprom, and pc_EepromChip data in the boardinfo
was only needed to work out the usage of the PCI bars.  Now that that is
squared away, this info is no longer needed and can be removed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only uses PCI bar 0 (devpriv->i_IobaseAmcc), and PCI bar 1
(dev->iobase), don't bother reading the unused PCI bars.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board always has 32 digital inputs. Remove the test when
initializing the subdevice.

Also, since this board is the only one supported by this driver,
remove the boardinfo about the digital inputs and just use the
data directly in the subdevice init.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This include is no longer needed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reading the eeprom on this board is not necessary.  All information
required is in the boardinfo.

Remove the eeprom support code which is not really useful here.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some board pointer are assigned twice via comedi_board() in the comedi low
level driver attach functions. Remove the duplicate assignment from the
variable definition where the pointer is not used anyway until assigned later
in the function when dev->board_ptr, that comedi_board() relies on, is setup
correctly.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a bug fix that has been lurking in the Google tree but not pushed
upstream.

From: Octavian Purdila <octavian.purdila@intel.com>

The memory region is already reserved in goldfish_init() during
platform init.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The base code imported from the Google tree is ifdef heaven. Prepare to fix
this by adding a helper function.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable the 64-bit nand data support in the goldfish nand driver.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable the 64-bit goldfish audio driver.
Support 64-bit buffer address and data read/write.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes "Missing a blank line after declarations" warnings.
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The white space was all wrong here.  The case statements were indented
too far.  The if else blocks weren't indented at all.  There was a break
statement aligned with the else block and it confused my static checker
because "were curly braces intended" so that the break statement was
only on the else side?  Also I removed some commented out code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There were a couple lines which were not indented far enough and it was
confusing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The for loop body wasn't indented so it upset my static checker.  Also
I removed an obsolete comment on the same line.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"*(p + 1)" and "len" are the same thing.  For reviewers who don't know
that, then this code is worrying because we cap "len", but pass
"*(p + 1)" to memcpy().

I have changed the code to use "len" throughout.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold a line to make it less than 80 characters
Signed-off-by: Sarath Lakshman <sarathlakshman@slynux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change old way of ops->setsockopt or ops->getsockopt in kernel
to kernel_setsockopt or kernel_getsockopt.
Signed-off-by: Fredrick John Berchmans <fredrickprashanth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If CONFIG_FS_POSIX_ACL=n:

drivers/staging/lustre/lustre/llite/xattr.c: In function 'll_setxattr_common':
drivers/staging/lustre/lustre/llite/xattr.c:115:27: warning: unused variable 'rce' [-Wunused-variable]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/lustre/lustre/llite/rw26.c: In function 'll_direct_IO_26':
drivers/staging/lustre/lustre/llite/rw26.c:383:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'ssize_t' [-Wformat]
drivers/staging/lustre/lustre/llite/rw26.c:383:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 10 has type 'ssize_t' [-Wformat]

Join the quoted string split across lines to fix a checkpatch warning while
we're at it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When CONFIG_SMP=n:

drivers/staging/lustre/include/linux/libcfs/linux/linux-mem.h:58:31: fatal error: libcfs/libcfs_cpu.h: No such file or directory

drivers/staging/lustre/lustre/libcfs/libcfs_cpu.c:78:1: error: redefinition of 'cfs_cpt_table_print'
drivers/staging/lustre/include/linux/libcfs/libcfs_cpu.h:109:1: note: previous definition of 'cfs_cpt_table_print' was here
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The obd_ioctl_getdata() function caps "data->ioc_len" at
OBD_MAX_IOCTL_BUFFER and then calls this obd_ioctl_is_invalid() to check
that the other values inside data are valid.

There are several lengths inside data but when they are added together
they must not be larger than "data->ioc_len".  The checks against
"(data->ioc_inllen1 > (1<<30))" are supposed to ensure that the addition
does not have an integer overflow.  But "(1<<30) * 4" actually can
overflow 32 bits, so the checks are insufficient.

I have changed it to "> OBD_MAX_IOCTL_BUFFER" instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pointer 'ni' checked for NULL at line 1569 may be passed to
function and may be dereferenced there by passing argument 1 to
function 'lnet_ni_notify_locked' at line 1621.
found by Klocwork Insight tool
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
CC: Dmitry Eremin <dmitry.eremin@intel.com>
CC: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null pointer 'cp' that comes from line 2544 may be dereferenced
at line 2618.
found by Klocwork Insight tool
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9386
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Local variable 'hash' is never used
found by Klocwork Insight tool
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/9386
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It should never be NULL because our interface list is up to date,
and even if it does, we'll just crash anyway so we are no better off.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insted of meddling directly in process environment variables
(which is also not possible on certain platforms due to not exported
symbols), create jobid_name proc file to represent this info
(to be filled by job scheduler epilogue).
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
CC: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>