- 07 Mar, 2018 2 commits
-
-
Zhu Yanjun authored
In send_atomic_ack function, it is not necessary to make a skb_clone. To gain better performance (high throughput and low latency), this skb_clone is removed. The following tests are made. server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512 The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server and client. This test runs for several hours. There is no memory leak and the whole system can work well. Based on the above network, the following tests are made. Server: ibv_rc_pingpong -d rxe0 -g 1 Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1 The test results on Server(10 tests are made). Before: Throughput is 137.07 Mbit/sec Latency is 517.76 usec/iter After: Throughput is 148.85 Mbit/sec Latency is 476.64 usec/iter The throughput is enhanced and the latency is reduced. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Add a parameter for configuring the port on which the ib_srpt driver listens for incoming RDMA/CM connections, namely /sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port. The default value for this parameter is 0 which means "do not listen for incoming RDMA/CM connections". Add RDMA/CM support to all code that handles connection state changes. Modify srpt_init_nodeacl() such that ACLs can be configured for IPv4 and IPv6 addresses. Note: incoming connection requests are only accepted for ports that have been enabled. See also the "if (!sport->enabled)" code in the connection request handler. See also the following configfs attribute: /sys/kernel/config/target/srpt/$port/$port/enable. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
- 06 Mar, 2018 11 commits
-
-
Gustavo A. R. Silva authored
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Sergey Gorenko authored
If a HCA supports the SG_GAPS_REG feature then fewer memory regions are required per command. This patch reduces the number of memory regions that is allocated per SRP session. Signed-off-by:
Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Tested-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Acked-by:
-
Bart Van Assche authored
This patch avoids that sparse reports the following: drivers/infiniband/hw/hfi1/driver.c:251:13: warning: context imbalance in 'rcv_hdrerr' - different lock contexts for basic block Signed-off-by:
-
Arushi authored
Continue at the bottom of a loop are removed. Issue found using drop_continue.cocci Coccinelle script. Signed-off-by:
Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by:
-
Shiraz Saleem authored
Storage ULPs (like NVMEoF) benefit from exposing affinity mapping per completion vector to find the optimal multi-queue affinity assignments. The ULPs call the verbs API ib_get_vector_affinity introduced in commit c66cd353 ("RDMA/core: expose affinity mappings per completion vector") to get the underlying devices affinity mappings. Add support in driver to expose the affinity masks per MSI-X completion vector. Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Shiraz Saleem authored
Currently all CM nodes involved in a connection are maintained in a connected_node list per dev. During connection setup, we need to search this every time we receive a packet on the iWARP LAN Queue (ILQ) and this can be pretty inefficient for large number of connections. Fix this by organizing the CM nodes in two lists - accelerated list and non-accelerated list. The search on ILQ receive would be limited to only non accelerated nodes. When a node moves to RTS, it is added to the accelerated list. Benchmarking ucmatose 16k connections shows a 20% improvement in test completion time. Signed-off-by:
-
Mustafa Ismail authored
Currently the TX pending lists for IEQ and ILQ are handled separately. The handling of both can be consolidated in i40iw_poll_completion. Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
-
Bart Van Assche authored
Avoid triggering an out-of-bounds stack access by changing the type of 'wr' from ib_send_wr into ib_rdma_wr. This patch fixes the following KASAN bug report: BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x7a9/0x9a0 [rdma_rxe] Read of size 8 at addr ffff880068197a48 by task kworker/2:1/44 Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: dump_stack+0x8e/0xcd print_address_description+0x6f/0x280 kasan_report+0x25a/0x380 __asan_load8+0x54/0x90 rxe_post_send+0x7a9/0x9a0 [rdma_rxe] srpt_zerolength_write+0xf0/0x180 [ib_srpt] srpt_cm_rtu_recv+0x68/0x110 [ib_srpt] srpt_rdma_cm_handler+0xbb/0x15b [ib_srpt] cma_ib_handler+0x1aa/0x4a0 [rdma_cm] cm_process_work+0x30/0x100 [ib_cm] cm_work_handler+0xa86/0x351b [ib_cm] process_one_work+0x475/0x9f0 worker_thread+0x69/0x690 kthread+0x1ad/0x1d0 ret_from_fork+0x3a/0x50 Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
-
Bart Van Assche authored
This patch avoids that KASAN reports the following when the SRP initiator calls srp_post_send(): ================================================================== BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x5c4/0x980 [rdma_rxe] Read of size 8 at addr ffff880066606e30 by task 02-mq/1074 CPU: 2 PID: 1074 Comm: 02-mq Not tainted 4.16.0-rc3-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 rxe_post_send+0x5c4/0x980 [rdma_rxe] srp_post_send.isra.16+0x149/0x190 [ib_srp] srp_queuecommand+0x94d/0x1670 [ib_srp] scsi_dispatch_cmd+0x1c2/0x550 [scsi_mod] scsi_queue_rq+0x843/0xa70 [scsi_mod] blk_mq_dispatch_rq_list+0x143/0xac0 blk_mq_do_dispatch_ctx+0x1c5/0x260 blk_mq_sched_dispatch_requests+0x2bf/0x2f0 __blk_mq_run_hw_queue+0xdb/0x160 __blk_mq_delay_run_hw_queue+0xba/0x100 blk_mq_run_hw_queue+0xf2/0x190 blk_mq_sched_insert_request+0x163/0x2f0 blk_execute_rq+0xb0/0x130 scsi_execute+0x14e/0x260 [scsi_mod] scsi_probe_and_add_lun+0x366/0x13d0 [scsi_mod] __scsi_scan_target+0x18a/0x810 [scsi_mod] scsi_scan_target+0x11e/0x130 [scsi_mod] srp_create_target+0x1522/0x19e0 [ib_srp] kernfs_fop_write+0x180/0x210 __vfs_write+0xb1/0x2e0 vfs_write+0xf6/0x250 SyS_write+0x99/0x110 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The buggy address belongs to the page: page:ffffea0001998180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066606d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 ffff880066606d80: f1 00 f2 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 >ffff880066606e00: f2 00 00 00 00 00 f2 f2 f2 f3 f3 f3 f3 00 00 00 ^ ffff880066606e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066606f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by: -
Bart Van Assche authored
This patch fixes the following KASAN complaint: ================================================================== BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x77d/0x9b0 [rdma_rxe] Read of size 8 at addr ffff880061aef860 by task 01/1080 CPU: 2 PID: 1080 Comm: 01 Not tainted 4.16.0-rc3-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 rxe_post_send+0x77d/0x9b0 [rdma_rxe] __ib_drain_sq+0x1ad/0x250 [ib_core] ib_drain_qp+0x9/0x30 [ib_core] srp_destroy_qp+0x51/0x70 [ib_srp] srp_free_ch_ib+0xfc/0x380 [ib_srp] srp_create_target+0x1071/0x19e0 [ib_srp] kernfs_fop_write+0x180/0x210 __vfs_write+0xb1/0x2e0 vfs_write+0xf6/0x250 SyS_write+0x99/0x110 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The buggy address belongs to the page: page:ffffea000186bbc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea000186bbe0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880061aef700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880061aef780: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffff880061aef800: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 f2 f2 f2 f2 ^ ffff880061aef880: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 f2 f2 ffff880061aef900: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 765d6774 ("IB: new common API for draining queues") Signed-off-by: -
Colin Ian King authored
The pointer rdi is being initialized with a value that is never read and re-assigned immediately after, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/infiniband/sw/rdmavt/vt.c:94:23: warning: Value stored to 'rdi' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 28 Feb, 2018 14 commits
-
-
Hernán Gonzalez authored
Note: This is compile only tested as I have no access to the hw. This variable was not used anywhere in the code. Removing it saves 24 bytes. add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-24 (-24) Function old new delta rxe_qp_state_name 24 - -24 Total: Before=3348732, After=3348708, chg -0.00% Signed-off-by:
Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by:
-
Hernán Gonzalez authored
Note: This is compile only tested as I have no access to the hw. This variable was not used in qib_sdma.c but in qib_iba7322.c. Declaring it there, as static, saves 56 bytes. add/remove: 0/2 grow/shrink: 0/0 up/down: 0/-144 (-144) Function old new delta qib_sdma_state_names 56 - -56 qib_sdma_event_names 88 - -88 Total: Before=2874565, After=2874421, chg -0.01% Signed-off-by:
-
Hernán Gonzalez authored
Note: This is compile only tested as I have no access to the hw. This variable was not used anywhere in the code. Removing it saves 88 bytes. add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-88 (-88) Function old new delta qib_sdma_event_names 88 - -88 Total: Before=2874565, After=2874477, chg -0.00% Signed-off-by:
-
Bart Van Assche authored
Except for a minor log message change, this patch does not change any functionality. For the introduction of %pIS, see also commit 10679643 ("lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs] format specifier"). Signed-off-by:
-
Bart Van Assche authored
The caller of srp_ib_lookup_path() is responsible for holding a reference on the SCSI host. That means that commit 8a0d18c6 was not necessary. Hence revert it. Signed-off-by:
-
Bart Van Assche authored
Before commit e494f6a7 ("[SCSI] improved eh timeout handler") it did not really matter whether or not abort handlers like srp_abort() called .scsi_done() when returning another value than SUCCESS. Since that commit however this matters. Hence only call .scsi_done() when returning SUCCESS. Signed-off-by:
-
Arnd Bergmann authored
On 32-bit targets, we otherwise get a warning about an impossible constant integer expression: In file included from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device': include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow] #define BIT(nr) (1UL << (nr)) ^~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT' #define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39) ^~~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH' #define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE' ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE; ^~~~~~~~~~~~~~~~~~~ Fixes: 872f3578 ("RDMA/bnxt_re: Add support for MRs with Huge pages") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
Building for a 32-bit target results in a couple of warnings from casting between a 32-bit pointer and a 64-bit integer: drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq': drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle, ^ drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] (struct bnxt_qplib_srq *)q_handle, ^ In file included from include/linux/byteorder/little_endian.h:5, from arch/arm/include/uapi/asm/byteorder.h:22, from include/asm-generic/bitops/le.h:6, from arch/arm/include/asm/bitops.h:342, from include/linux/bitops.h:38, from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39: drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq': include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) ^ include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64' #define cpu_to_le64 __cpu_to_le64 ^~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64' req.srq_handle = cpu_to_le64(srq); Using a uintptr_t as an intermediate works on all architectures. Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: -
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Leon Romanovsky authored
Perform QP type check in one place and fail as early as possible. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Update .mailmap file to point to my primary open-source related e-mail address. Signed-off-by:
-
Jason Gunthorpe authored
Maintaining the uobjects list is mandatory, hoist it into the common rdma_alloc_commit_uobject() function and inline it as there is now only one caller. Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Doug Ledford authored
Merge tag 'mlx5-updates-2018-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next mlx5-update-2018-02-23 (IB representors) From: Mark Bloch <markb@mellanox.com> ========= Add IB representor when in switchdev mode The following series adds support for an IB (RAW Ethernet only) device representor which is created when the user switches to switchdev mode. Today when switching to switchdev mode the only representors which are created are net devices. Each netdev is a representor of a virtual function and any data sent via the representor is received on the virtual function, and any data sent via the virtual function is received by the representor. For the mlx5 driver the main use of this functionality is to be able to use Open vSwitch on the hypervisor in order to manage/control traffic from/to the virtual functions. Open vSwitch can also work with DPDK devices and not just net devices, this series exposes an IB device, which Mellanox PMD driver uses, which then can be used by Open vSwitch DPDK. An IB device representor exposes only RAW Ethernet QP capabilities and the ability to create flow rules to direct traffic to its RX queues. The state of the IB device (ACTIVE/DOWN etc..) is based on the state of the corresponding net device representor. No other RDMA/RoCE functionality is currently supported and no GID table is exposed. ========= Signed-off-by:
-
- 23 Feb, 2018 13 commits
-
-
Mark Bloch authored
When in switchdev mode, there is no need to do self loopback checks as we can't receive those packets, we insert steering rules to the eswitch that make sure packets can't be looped back. Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Mark Bloch authored
Up until this point it wasn't possible to activate IB representors when switching to switchdev mode, remove this limitation. We trigger reload of the PF IB interface in order to make sure that already allocated resources are invalid and new resources will be opened correctly with all the limitations of switchdev mode applied (only raw packet capabilities, without RoCE). We also move the remove/add to a place where the E-Switch mode is set/unset to better control when to trigger this action, this will allow the IB side to start in the correct mode. For better code reuse, create a function which reloads an interface and export it. Signed-off-by:
-
Mark Bloch authored
This commit adds full support for IB representor: 1) Representors profile, We add two new profiles: nic_rep_profile - This profile will be used to create an IB device that represents the PF/UPLINK. rep_profile - This profile will be used to create an IB device that represents VFs. Each VF will be its own representor. 2) Proper load/unload callbacks, Those are called by the E-Switch when moving to/from switchdev mode. 3) Different flow DB handling for when we in switchdev mode. Signed-off-by:
-
Mark Bloch authored
In order to forward traffic from representor's SQ to the right virtual function, every time an SQ is created also add the corresponding flow rule to the FDB. Signed-off-by:
-
Mark Bloch authored
When enabling many VFs and switching to switchdev mode, the total amount of mkeys we try to allocate when loading representors is very large and may cause timeouts on allocations, the same issues was observed on VFs and we employ the same fix that was done for them. We avoid allocating the full MR cache on load but still allow it to be manipulated once the IB device is loaded. Signed-off-by:
-
Mark Bloch authored
Currently in switchdev mode we allow only for raw packet QPs. Expose the right capabilities and set the gid table length to 0, also make sure we don't try to enable RoCE, so split the function to enable RoCE so representors can enable only the notifier needed for net device events. Signed-off-by:
-
Mark Bloch authored
Currently we listen to netdev register/unregister event based on PCI device. When in switchdev mode PF and representors share the same PCI device, so in order to pair ib device and netdev in switchdev mode compare the netdev that triggered the event to that of the representor. Expose a function that lets you receive the netdev associated what a given representor. Signed-off-by:
-
Mark Bloch authored
When we point to a representor, it means we are in switchdev mode. The flow db is shared between PF and virtual function representors so each rule created needs to have a match on its specific source port. Signed-off-by:
-
Mark Bloch authored
A flow DB is a shared resource between PF and representors, need to allocate it only when creating the PF IB device. Once we add IB representors, they will use the flow db which was created by the PF. Signed-off-by:
-
Mark Bloch authored
Create the basic infrastructure of registering and unregistering IB representors. The load/unload callbacks are left empty and proper implementation will be introduced in following patches. Signed-off-by:
-
Mark Bloch authored
Create a new representor type: REP_IB. which will be initialized by an IB device that is used as a logical representor of a eswitch vport (VF or uplink) just like we have a net device today in switchdev mode. Signed-off-by:
-
Mark Bloch authored
Under switchdev mode we insert an eswitch miss rule causing any unmatched traffic to be sent towards the PF vport. This miss rule can be optimized if we break it to two, one case is for multicast traffic and the other for unicast. Breaking the miss rule into two (unicast and multicast) allows the firmware to program the hardware in a more efficient way. Using ConncetX-5 Ex with IXIA and testpmd (which use IB representors): IXIA -> NIC -> PF -> IB representor -> NIC -> VF: - Without this optimization: 9.2 MPPS. - With this optimization: 18 MPPS. VF -> NIC -> IB representor-> PF -> NIC -> IXIA: - Without this optimization: 17 MPPS. - With this optimization: 23.4 MPPS. Signed-off-by: -
Mark Bloch authored
The max FTE number should be the max number of SQs that can be opened. Ethernet representors open one SQ each. Once we add IB representor this will increase (depends on the user). For now lets start with 31 per IB representor and if needed increase in the future. This increase only affects the number of FTEs in the slow path FDB, offloaded rules (done via TC on the fast path portion of the FDB) aren't affected. Signed-off-by:
-
