Pull cgroup updates from Tejun Heo:

 - cpuset changes including the fix for an incorrect interaction with
   CPU hotplug and an optimization

 - Other doc and cosmetic changes

* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1/cpusets: update libcgroup project link
  cgroup/cpuset: Minor updates to test_cpuset_prs.sh
  cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
  cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
  cpuset: Clean up cpuset_node_allowed
  cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers

Pull workqueue updates from Tejun Heo:
 "Mostly changes from Petr to improve warning and error reporting.

  Workqueue now reports more of the relevant failures with better
  context which should help debugging"

* tag 'wq-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Introduce show_freezable_workqueues
  workqueue: Print backtraces from CPUs with hung CPU bound workqueues
  workqueue: Warn when a rescuer could not be created
  workqueue: Interrupted create_worker() is not a repeated event
  workqueue: Warn when a new worker could not be created
  workqueue: Fix hung time report of worker pools
  workqueue: Simplify a pr_warn() call in wq_select_unbound_cpu()
  MAINTAINERS: Add workqueue_internal.h to the WORKQUEUE entry

Pull RISC-V updates from Palmer Dabbelt:

 - Support for runtime detection of the Svnapot extension

 - Support for Zicboz when clearing pages

 - We've moved to GENERIC_ENTRY

 - Support for !MMU on rv32 systems

 - The linear region is now mapped via huge pages

 - Support for building relocatable kernels

 - Support for the hwprobe interface

 - Various fixes and cleanups throughout the tree

* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
  RISC-V: hwprobe: Explicity check for -1 in vdso init
  RISC-V: hwprobe: There can only be one first
  riscv: Allow to downgrade paging mode from the command line
  dt-bindings: riscv: add sv57 mmu-type
  RISC-V: hwprobe: Remove __init on probe_vendor_features()
  riscv: Use --emit-relocs in order to move .rela.dyn in init
  riscv: Check relocations at compile time
  powerpc: Move script to check relocations at compile time in scripts/
  riscv: Introduce CONFIG_RELOCATABLE
  riscv: Move .rela.dyn outside of init to avoid empty relocations
  riscv: Prepare EFI header for relocatable kernels
  riscv: Unconditionnally select KASAN_VMALLOC if KASAN
  riscv: Fix ptdump when KASAN is enabled
  riscv: Fix EFI stub usage of KASAN instrumented strcmp function
  riscv: Move DTB_EARLY_BASE_VA to the kernel address space
  riscv: Rework kasan population functions
  riscv: Split early and final KASAN population functions
  riscv: Use PUD/P4D/PGD pages for the linear mapping
  riscv: Move the linear mapping creation in its own function
  riscv: Get rid of riscv_pfn_base variable
  ...

Pull m68knommu updates from Greg Ungerer:
 "A couple of minor changes.

  One to remove the long dead uclinux.org web address and email list
  from the MAINTAINERS entry for UCLINUX.

  The other to remove dead config options in the m68knommu Kconfig"

* tag 'm68knommu-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
  MAINTAINERS: drop uclinux.org

Pull powerpc updates from Michael Ellerman:

 - Add support for building the kernel using PC-relative addressing on
   Power10.

 - Allow HV KVM guests on Power10 to use prefixed instructions.

 - Unify support for the P2020 CPU (85xx) into a single machine
   description.

 - Always build the 64-bit kernel with 128-bit long double.

 - Drop support for several obsolete 2000's era development boards as
   identified by Paul Gortmaker.

 - A series fixing VFIO on Power since some generic changes.

 - Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.

* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
  powerpc/64s: Disable pcrel code model on Clang
  powerpc: Fix merge conflict between pcrel and copy_thread changes
  powerpc/configs/powernv: Add IGB=y
  powerpc/configs/64s: Drop JFS Filesystem
  powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
  powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
  powerpc/configs: Make pseries_le an alias for ppc64le_guest
  powerpc/configs: Incorporate generic kvm_guest.config into guest configs
  powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
  powerpc/configs/64s: Enable Device Mapper options
  powerpc/configs/64s: Enable PSTORE
  powerpc/configs/64s: Enable VLAN support
  powerpc/configs/64s: Enable BLK_DEV_NVME
  powerpc/configs/64s: Drop REISERFS
  powerpc/configs/64s: Use SHA512 for module signatures
  powerpc/configs/64s: Enable IO_STRICT_DEVMEM
  powerpc/configs/64s: Enable SCHEDSTATS
  powerpc/configs/64s: Enable DEBUG_VM & other options
  powerpc/configs/64s: Enable EMULATED_STATS
  powerpc/configs/64s: Enable KUNIT and most tests
  ...

Pull tracing tools updates from Steven Rostedt:

 - Add auto-analysis only option to rtla/timerlat

   Add an --aa-only option to the tooling to perform only the auto
   analysis and not to parse and format the data.

 - Other minor fixes and clean ups

* tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla/timerlat: Fix "Previous IRQ" auto analysis' line
  rtla/timerlat: Add auto-analysis only option
  rv: Remove redundant assignment to variable retval
  rv: Fix addition on an uninitialized variable 'run'
  rtla: Add .gitignore file

Pull tracing updates from Steven Rostedt:

 - User events are finally ready!

   After lots of collaboration between various parties, we finally
   locked down on a stable interface for user events that can also work
   with user space only tracing.

   This is implemented by telling the kernel (or user space library, but
   that part is user space only and not part of this patch set), where
   the variable is that the application uses to know if something is
   listening to the trace.

   There's also an interface to tell the kernel about these events,
   which will show up in the /sys/kernel/tracing/events/user_events/
   directory, where it can be enabled.

   When it's enabled, the kernel will update the variable, to tell the
   application to start writing to the kernel.

   See https://lwn.net/Articles/927595/

 - Cleaned up the direct trampolines code to simplify arm64 addition of
   direct trampolines.

   Direct trampolines use the ftrace interface but instead of jumping to
   the ftrace trampoline, applications (mostly BPF) can register their
   own trampoline for performance reasons.

 - Some updates to the fprobe infrastructure. fprobes are more efficient
   than kprobes, as it does not need to save all the registers that
   kprobes on ftrace do. More work needs to be done before the fprobes
   will be exposed as dynamic events.

 - More updates to references to the obsolete path of
   /sys/kernel/debug/tracing for the new /sys/kernel/tracing path.

 - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
   line by line instead of all at once.

   There are users in production kernels that have a large data dump
   that originally used printk() directly, but the data dump was larger
   than what printk() allowed as a single print.

   Using seq_buf() to do the printing fixes that.

 - Add /sys/kernel/tracing/touched_functions that shows all functions
   that was every traced by ftrace or a direct trampoline. This is used
   for debugging issues where a traced function could have caused a
   crash by a bpf program or live patching.

 - Add a "fields" option that is similar to "raw" but outputs the fields
   of the events. It's easier to read by humans.

 - Some minor fixes and clean ups.

* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
  ring-buffer: Sync IRQ works before buffer destruction
  tracing: Add missing spaces in trace_print_hex_seq()
  ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
  recordmcount: Fix memory leaks in the uwrite function
  tracing/user_events: Limit max fault-in attempts
  tracing/user_events: Prevent same address and bit per process
  tracing/user_events: Ensure bit is cleared on unregister
  tracing/user_events: Ensure write index cannot be negative
  seq_buf: Add seq_buf_do_printk() helper
  tracing: Fix print_fields() for __dyn_loc/__rel_loc
  tracing/user_events: Set event filter_type from type
  ring-buffer: Clearly check null ptr returned by rb_set_head_page()
  tracing: Unbreak user events
  tracing/user_events: Use print_format_fields() for trace output
  tracing/user_events: Align structs with tabs for readability
  tracing/user_events: Limit global user_event count
  tracing/user_events: Charge event allocs to cgroups
  tracing/user_events: Update documentation for ABI
  tracing/user_events: Use write ABI in example
  tracing/user_events: Add ABI self-test
  ...

Pull SMP cross-CPU function-call updates from Ingo Molnar:

 - Remove diagnostics and adjust config for CSD lock diagnostics

 - Add a generic IPI-sending tracepoint, as currently there's no easy
   way to instrument IPI origins: it's arch dependent and for some major
   architectures it's not even consistently available.

* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  trace,smp: Trace all smp_function_call*() invocations
  trace: Add trace_ipi_send_cpu()
  sched, smp: Trace smp callback causing an IPI
  smp: reword smp call IPI comment
  treewide: Trace IPIs sent via smp_send_reschedule()
  irq_work: Trace self-IPIs sent via arch_irq_work_raise()
  smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
  sched, smp: Trace IPIs sent via send_call_function_single_ipi()
  trace: Add trace_ipi_send_cpumask()
  kernel/smp: Make csdlock_debug= resettable
  locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
  locking/csd_lock: Remove added data from CSD lock debugging
  locking/csd_lock: Add Kconfig option for csd_debug default

Pull scheduler updates from Ingo Molnar:

 - Allow unprivileged PSI poll()ing

 - Fix performance regression introduced by mm_cid

 - Improve livepatch stalls by adding livepatch task switching to
   cond_resched(). This resolves livepatching busy-loop stalls with
   certain CPU-bound kthreads

 - Improve sched_move_task() performance on autogroup configs

 - On core-scheduling CPUs, avoid selecting throttled tasks to run

 - Misc cleanups, fixes and improvements

* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/clock: Fix local_clock() before sched_clock_init()
  sched/rt: Fix bad task migration for rt tasks
  sched: Fix performance regression introduced by mm_cid
  sched/core: Make sched_dynamic_mutex static
  sched/psi: Allow unprivileged polling of N*2s period
  sched/psi: Extract update_triggers side effect
  sched/psi: Rename existing poll members in preparation
  sched/psi: Rearrange polling code in preparation
  sched/fair: Fix inaccurate tally of ttwu_move_affine
  vhost: Fix livepatch timeouts in vhost_worker()
  livepatch,sched: Add livepatch task switching to cond_resched()
  livepatch: Skip task_call_func() for current task
  livepatch: Convert stack entries array to percpu
  sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
  sched/core: Reduce cost of sched_move_task when config autogroup
  sched/core: Avoid selecting the task that is throttled to run when core-sched enable
  sched/topology: Make sched_energy_mutex,update static

Pull perf updates from Ingo Molnar:

 - Add Intel Granite Rapids support

 - Add uncore events for Intel SPR IMC PMU

 - Fix perf IRQ throttling bug

* tag 'perf-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add events for Intel SPR IMC PMU
  perf/core: Fix hardlockup failure caused by perf throttle
  perf/x86/cstate: Add Granite Rapids support
  perf/x86/msr: Add Granite Rapids
  perf/x86/intel: Add Granite Rapids

Pull objtool updates from Ingo Molnar:

 - Mark arch_cpu_idle_dead() __noreturn, make all architectures &
   drivers that did this inconsistently follow this new, common
   convention, and fix all the fallout that objtool can now detect
   statically

 - Fix/improve the ORC unwinder becoming unreliable due to
   UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
   and UNWIND_HINT_UNDEFINED to resolve it

 - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code

 - Generate ORC data for __pfx code

 - Add more __noreturn annotations to various kernel startup/shutdown
   and panic functions

 - Misc improvements & fixes

* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/hyperv: Mark hv_ghcb_terminate() as noreturn
  scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
  x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
  btrfs: Mark btrfs_assertfail() __noreturn
  objtool: Include weak functions in global_noreturns check
  cpu: Mark nmi_panic_self_stop() __noreturn
  cpu: Mark panic_smp_self_stop() __noreturn
  arm64/cpu: Mark cpu_park_loop() and friends __noreturn
  x86/head: Mark *_start_kernel() __noreturn
  init: Mark start_kernel() __noreturn
  init: Mark [arch_call_]rest_init() __noreturn
  objtool: Generate ORC data for __pfx code
  x86/linkage: Fix padding for typed functions
  objtool: Separate prefix code from stack validation code
  objtool: Remove superfluous dead_end_function() check
  objtool: Add symbol iteration helpers
  objtool: Add WARN_INSN()
  scripts/objdump-func: Support multiple functions
  context_tracking: Fix KCSAN noinstr violation
  objtool: Add stackleak instrumentation to uaccess safe list
  ...

Pull x86 LAM (Linear Address Masking) support from Dave Hansen:
 "Add support for the new Linear Address Masking CPU feature.

  This is similar to ARM's Top Byte Ignore and allows userspace to store
  metadata in some bits of pointers without masking it out before use"

* tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside
  x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA
  selftests/x86/lam: Add test cases for LAM vs thread creation
  selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking
  selftests/x86/lam: Add inherit test cases for linear-address masking
  selftests/x86/lam: Add io_uring test cases for linear-address masking
  selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking
  selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking
  x86/mm/iommu/sva: Make LAM and SVA mutually exclusive
  iommu/sva: Replace pasid_valid() helper with mm_valid_pasid()
  mm: Expose untagging mask in /proc/$PID/status
  x86/mm: Provide arch_prctl() interface for LAM
  x86/mm: Reduce untagged_addr() overhead for systems without LAM
  x86/uaccess: Provide untagged_addr() and remove tags before address check
  mm: Introduce untagged_addr_remote()
  x86/mm: Handle LAM on context switch
  x86: CPUID and CR3/CR4 flags for Linear Address Masking
  x86: Allow atomic MM_CONTEXT flags setting
  x86/mm: Rework address range check in get_user() and put_user()

Pull x86 tdx update from Dave Hansen:
 "The original tdx hypercall assembly code took two flags in %RSI to
  tweak its behavior at runtime. PeterZ recently axed one flag in commit
  e80a48ba ("x86/tdx: Remove TDX_HCALL_ISSUE_STI").

  Kill the other flag too and tweak the 'output' mode with an assembly
  macro instead. This results in elimination of one push/pop pair and
  overall easier to read assembly.

   - Do conditional __tdx_hypercall() 'output' processing via an
     assembly macro argument rather than a runtime register"

* tag 'x86_tdx_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Drop flags from __tdx_hypercall()

Pull x86 fpu updates from Dave Hansen:
 "There's no _actual_ kernel functionality here.

  This expands the documentation around AMX support including some code
  examples. The example code also exposed the fact that hardware
  architecture constants as part of the ABI, but there's no easy place
  that they get defined for apps. Adding them to a uabi header will
  eventually make life easier for consumers of the ABI.

  Summary:

   - Improve AMX documentation along with example code

   - Explicitly make some hardware constants part of the uabi"

* tag 'x86_fpu_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/x86: Explain the state component permission for guests
  Documentation/x86: Add the AMX enabling example
  x86/arch_prctl: Add AMX feature numbers as ABI constants
  Documentation/x86: Explain the purpose for dynamic features

Pull x86 resctrl update from Dave Hansen:
 "Reduce redundant counter reads with resctrl refactoring"

* tag 'x86_cache_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Avoid redundant counter read in __mon_event_count()

Pull x86 cleanups from Borislav Petkov:

 - Unify duplicated __pa() and __va() definitions

 - Simplify sysctl tables registration

 - Remove unused symbols

 - Correct function name in comment

* tag 'x86_cleanups_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Centralize __pa()/__va() definitions
  x86: Simplify one-level sysctl registration for itmt_kern_table
  x86: Simplify one-level sysctl registration for abi_table2
  x86/platform/intel-mid: Remove unused definitions from intel-mid.h
  x86/uaccess: Remove memcpy_page_flushcache()
  x86/entry: Change stale function name in comment to error_return()

Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "Mainly singleton patches all over the place.

  Series of note are:

   - updates to scripts/gdb from Glenn Washburn

   - kexec cleanups from Bjorn Helgaas"

* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
  mailmap: add entries for Paul Mackerras
  libgcc: add forward declarations for generic library routines
  mailmap: add entry for Oleksandr
  ocfs2: reduce ioctl stack usage
  fs/proc: add Kthread flag to /proc/$pid/status
  ia64: fix an addr to taddr in huge_pte_offset()
  checkpatch: introduce proper bindings license check
  epoll: rename global epmutex
  scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
  scripts/gdb: create linux/vfs.py for VFS related GDB helpers
  uapi/linux/const.h: prefer ISO-friendly __typeof__
  delayacct: track delays from IRQ/SOFTIRQ
  scripts/gdb: timerlist: convert int chunks to str
  scripts/gdb: print interrupts
  scripts/gdb: raise error with reduced debugging information
  scripts/gdb: add a Radix Tree Parser
  lib/rbtree: use '+' instead of '|' for setting color.
  proc/stat: remove arch_idle_time()
  checkpatch: check for misuse of the link tags
  checkpatch: allow Closes tags with links
  ...

Pull MM updates from Andrew Morton:

 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
   switching from a user process to a kernel thread.

 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
   Raghav.

 - zsmalloc performance improvements from Sergey Senozhatsky.

 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.

 - VFS rationalizations from Christoph Hellwig:
     - removal of most of the callers of write_one_page()
     - make __filemap_get_folio()'s return value more useful

 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing. Use `mount -o noswap'.

 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.

 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).

 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.

 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
   rather than exclusive, and has fixed a bunch of errors which were
   caused by its unintuitive meaning.

 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.

 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.

 - Cleanups to do_fault_around() by Lorenzo Stoakes.

 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.

 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.

 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.

 - Lorenzo has also contributed further cleanups of vma_merge().

 - Chaitanya Prakash provides some fixes to the mmap selftesting code.

 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.

 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.

 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.

 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.

 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.

 - Yosry Ahmed has improved the performance of memcg statistics
   flushing.

 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.

 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.

 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.

 - Pankaj Raghav has made page_endio() unneeded and has removed it.

 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.

 - Yosry Ahmed has fixed an issue around memcg's page recalim
   accounting.

 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.

 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.

 - Peter Xu fixes a few issues with uffd-wp at fork() time.

 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.

* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
  mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
  shmem: restrict noswap option to initial user namespace
  mm/khugepaged: fix conflicting mods to collapse_file()
  sparse: remove unnecessary 0 values from rc
  mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
  hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
  maple_tree: fix allocation in mas_sparse_area()
  mm: do not increment pgfault stats when page fault handler retries
  zsmalloc: allow only one active pool compaction context
  selftests/mm: add new selftests for KSM
  mm: add new KSM process and sysfs knobs
  mm: add new api to enable ksm per process
  mm: shrinkers: fix debugfs file permissions
  mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
  migrate_pages_batch: fix statistics for longterm pin retry
  userfaultfd: use helper function range_in_vma()
  lib/show_mem.c: use for_each_populated_zone() simplify code
  mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
  fs/buffer: convert create_page_buffers to folio_create_buffers
  fs/buffer: add folio_create_empty_buffers helper
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Huawei B593u-12

 - added support for virt board aligned to QEMU MIPS virt board

 - added support for doing DMA coherence on a per device base

 - reworked handling of RALINK SoCs

 - cleanup for Loongon64 barriers

 - removed deprecated support for MIPS_CMP SMP handling method

 - removed support Sibyte CARMEL and CHRINE boards

 - cleanups and fixes

* tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: uprobes: Restore thread.trap_nr
  MIPS: Don't clear _PAGE_SPECIAL in _PAGE_CHG_MASK
  MIPS: Sink body of check_bugs_early() into its only call site
  MIPS: Mark check_bugs() as __init
  Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
  MIPS: octeon_switch: Remove duplicated labels
  MIPS: loongson2ef: Add missing break in cs5536_isa
  MIPS: Remove set_swbp() in uprobes.c
  MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
  MIPS: fw: Allow firmware to pass a empty env
  MIPS: Remove deprecated CONFIG_MIPS_CMP
  MIPS: lantiq: remove unused function declaration
  MIPS: Drop unused positional parameter in local_irq_{dis,en}able
  MIPS: mm: Remove local_cache_flush_page
  MIPS: Remove no longer used ide.h
  MIPS: mm: Remove unused *cache_page_indexed flush functions
  MIPS: generic: Enable all CPUs supported by virt board in Kconfig
  MIPS: Add board config for virt board
  MIPS: Octeon: Disable CVMSEG by default on other platforms
  MIPS: Loongson: Don't select platform features with CPU
  ...

Pull sh updates from John Paul Adrian Glaubitz:
 "This is a bit larger than my previous one and mainly consists of
  clean-up work in the arch/sh directory by Geert Uytterhoeven and Randy
  Dunlap.

  Additionally, this fixes a bug in the Storage Queue code that was
  discovered while I was reviewing a patch to switch the code to the
  bitmap API by Christophe Jaillet.

  So this contains both a fix for the original bug in the Storage Queue
  code that can be backported later as well as the Christophe's patch to
  swich the code to the bitmap API.

  Summary:

   - Use generic GCC library routines

   - sq: Use the bitmap API when applicable

   - sq: Fix incorrect element size for allocating bitmap buffer

   - pci: Remove unused variable in SH-7786 PCI Express code

   - mcount.S: fix build error when PRINTK is not enabled

   - remove sh5/sh64 last fragments

   - math-emu: fix macro redefined warning

   - init: use OF_EARLY_FLATTREE for early init

   - nmi_debug: fix return value of __setup handler

   - SH2007: drop the bad URL info"

* tag 'sh-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: Replace <uapi/asm/types.h> by <asm-generic/int-ll64.h>
  sh: Use generic GCC library routines
  sh: sq: Use the bitmap API when applicable
  sh: sq: Fix incorrect element size for allocating bitmap buffer
  sh: pci: Remove unused variable in SH-7786 PCI Express code
  sh: mcount.S: fix build error when PRINTK is not enabled
  sh: remove sh5/sh64 last fragments
  sh: math-emu: fix macro redefined warning
  sh: init: use OF_EARLY_FLATTREE for early init
  sh: nmi_debug: fix return value of __setup handler
  sh: SH2007: drop the bad URL info

Pull xen updates from Juergen Gross:

 - some cleanups in the Xen blkback driver

 - fix potential sleeps under lock in various Xen drivers

* tag 'for-linus-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/blkback: move blkif_get_x86_*_req() into blkback.c
  xen/blkback: simplify free_persistent_gnts() interface
  xen/blkback: remove stale prototype
  xen/blkback: fix white space code style issues
  xen/pvcalls: don't call bind_evtchn_to_irqhandler() under lock
  xen/scsiback: don't call scsiback_free_translation_entry() under lock
  xen/pciback: don't call pcistub_device_put() under lock

Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - PCI passthrough for Hyper-V confidential VMs (Michael Kelley)

 - Hyper-V VTL mode support (Saurabh Sengar)

 - Move panic report initialization code earlier (Long Li)

 - Various improvements and bug fixes (Dexuan Cui and Michael Kelley)

* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
  PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
  Drivers: hv: move panic report code from vmbus to hv early init code
  x86/hyperv: VTL support for Hyper-V
  Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
  x86/hyperv: Make hv_get_nmi_reason public
  x86/hyperv: Add VTL specific structs and hypercalls
  x86/init: Make get/set_rtc_noop() public
  x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
  x86/hyperv: Add callback filter to cpumask_to_vpset()
  Drivers: hv: vmbus: Remove the per-CPU post_msg_page
  clocksource: hyper-v: make sure Invariant-TSC is used if it is available
  PCI: hv: Enable PCI pass-thru devices in Confidential VMs
  Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
  hv_netvsc: Remove second mapping of send and recv buffers
  Drivers: hv: vmbus: Remove second way of mapping ring buffers
  Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
  swiotlb: Remove bounce buffer remapping for Hyper-V
  Driver: VMBus: Add Devicetree support
  dt-bindings: bus: Add Hyper-V VMBus
  Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio,vhost,vdpa: features, fixes, and cleanups:

   - reduction in interrupt rate in virtio

   - perf improvement for VDUSE

   - scalability for vhost-scsi

   - non power of 2 ring support for packed rings

   - better management for mlx5 vdpa

   - suspend for snet

   - VIRTIO_F_NOTIFICATION_DATA

   - shared backend with vdpa-sim-blk

   - user VA support in vdpa-sim

   - better struct packing for virtio

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits)
  vhost_vdpa: fix unmap process in no-batch mode
  MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS
  tools/virtio: fix build caused by virtio_ring changes
  virtio_ring: add a struct device forward declaration
  vdpa_sim_blk: support shared backend
  vdpa_sim: move buffer allocation in the devices
  vdpa/snet: use likely/unlikely macros in hot functions
  vdpa/snet: implement kick_vq_with_data callback
  virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support
  virtio: add VIRTIO_F_NOTIFICATION_DATA feature support
  vdpa/snet: support the suspend vDPA callback
  vdpa/snet: support getting and setting VQ state
  MAINTAINERS: add vringh.h to Virtio Core and Net Drivers
  vringh: address kdoc warnings
  vdpa: address kdoc warnings
  virtio_ring: don't update event idx on get_buf
  vdpa_sim: add support for user VA
  vdpa_sim: replace the spinlock with a mutex to protect the state
  vdpa_sim: use kthread worker
  vdpa_sim: make devices agnostic for work management
  ...

Pull pstore update from Kees Cook:

 - Revert pmsg_lock back to a normal mutex (John Stultz)

* tag 'pstore-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Revert pmsg_lock back to a normal mutex

Pull hardening update from Kees Cook:

 - Fix kheaders array declaration to avoid tripping FORTIFY_SOURCE

* tag 'hardening-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kheaders: Use array declaration instead of char

Pull sysctl updates from Luis Chamberlain:
 "This only does a few sysctl moves from the kernel/sysctl.c file, the
  rest of the work has been put towards deprecating two API calls which
  incur recursion and prevent us from simplifying the registration
  process / saving memory per move. Most of the changes have been
  soaking on linux-next since v6.3-rc3.

  I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's
  feedback that we should see if we could *save* memory with these moves
  instead of incurring more memory. We currently incur more memory since
  when we move a syctl from kernel/sysclt.c out to its own file we end
  up having to add a new empty sysctl used to register it. To achieve
  saving memory we want to allow syctls to be passed without requiring
  the end element being empty, and just have our registration process
  rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls
  would make the sysctl registration pretty brittle, hard to read and
  maintain as can be seen from Meng Tang's efforts to do just this [0].
  Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations
  also implies doing the work to deprecate two API calls which use
  recursion in order to support sysctl declarations with subdirectories.

  And so during this development cycle quite a bit of effort went into
  this deprecation effort. I've annotated the following two APIs are
  deprecated and in few kernel releases we should be good to remove
  them:

   - register_sysctl_table()
   - register_sysctl_paths()

  During this merge window we should be able to deprecate and unexport
  register_sysctl_paths(), we can probably do that towards the end of
  this merge window.

  Deprecating register_sysctl_table() will take a bit more time but this
  pull request goes with a few example of how to do this.

  As it turns out each of the conversions to move away from either of
  these two API calls *also* saves memory. And so long term, all these
  changes *will* prove to have saved a bit of memory on boot.

  The way I see it then is if remove a user of one deprecated call, it
  gives us enough savings to move one kernel/sysctl.c out from the
  generic arrays as we end up with about the same amount of bytes.

  Since deprecating register_sysctl_table() and register_sysctl_paths()
  does not require maintainer coordination except the final unexport
  you'll see quite a bit of these changes from other pull requests, I've
  just kept the stragglers after rc3"

Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0]

* tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits)
  fs: fix sysctls.c built
  mm: compaction: remove incorrect #ifdef checks
  mm: compaction: move compaction sysctl to its own file
  mm: memory-failure: Move memory failure sysctls to its own file
  arm: simplify two-level sysctl registration for ctl_isa_vars
  ia64: simplify one-level sysctl registration for kdump_ctl_table
  utsname: simplify one-level sysctl registration for uts_kern_table
  ntfs: simplfy one-level sysctl registration for ntfs_sysctls
  coda: simplify one-level sysctl registration for coda_table
  fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls
  xfs: simplify two-level sysctl registration for xfs_table
  nfs: simplify two-level sysctl registration for nfs_cb_sysctls
  nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
  lockd: simplify two-level sysctl registration for nlm_sysctls
  proc_sysctl: enhance documentation
  xen: simplify sysctl registration for balloon
  md: simplify sysctl registration
  hv: simplify sysctl registration
  scsi: simplify sysctl registration with register_sysctl()
  csky: simplify alignment sysctl registration
  ...

Pull module updates from Luis Chamberlain:
 "The summary of the changes for this pull requests is:

   - Song Liu's new struct module_memory replacement

   - Nick Alcock's MODULE_LICENSE() removal for non-modules

   - My cleanups and enhancements to reduce the areas where we vmalloc
     module memory for duplicates, and the respective debug code which
     proves the remaining vmalloc pressure comes from userspace.

  Most of the changes have been in linux-next for quite some time except
  the minor fixes I made to check if a module was already loaded prior
  to allocating the final module memory with vmalloc and the respective
  debug code it introduces to help clarify the issue. Although the
  functional change is small it is rather safe as it can only *help*
  reduce vmalloc space for duplicates and is confirmed to fix a bootup
  issue with over 400 CPUs with KASAN enabled. I don't expect stable
  kernels to pick up that fix as the cleanups would have also had to
  have been picked up. Folks on larger CPU systems with modules will
  want to just upgrade if vmalloc space has been an issue on bootup.

  Given the size of this request, here's some more elaborate details:

  The functional change change in this pull request is the very first
  patch from Song Liu which replaces the 'struct module_layout' with a
  new 'struct module_memory'. The old data structure tried to put
  together all types of supported module memory types in one data
  structure, the new one abstracts the differences in memory types in a
  module to allow each one to provide their own set of details. This
  paves the way in the future so we can deal with them in a cleaner way.
  If you look at changes they also provide a nice cleanup of how we
  handle these different memory areas in a module. This change has been
  in linux-next since before the merge window opened for v6.3 so to
  provide more than a full kernel cycle of testing. It's a good thing as
  quite a bit of fixes have been found for it.

  Jason Baron then made dynamic debug a first class citizen module user
  by using module notifier callbacks to allocate / remove module
  specific dynamic debug information.

  Nick Alcock has done quite a bit of work cross-tree to remove module
  license tags from things which cannot possibly be module at my request
  so to:

   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area is
      active with no clear solution in sight.

   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags

  In so far as a) is concerned, although module license tags are a no-op
  for non-modules, tools which would want create a mapping of possible
  modules can only rely on the module license tag after the commit
  8b41fc44 ("kbuild: create modules.builtin without
  Makefile.modbuiltin or tristate.conf").

  Nick has been working on this *for years* and AFAICT I was the only
  one to suggest two alternatives to this approach for tooling. The
  complexity in one of my suggested approaches lies in that we'd need a
  possible-obj-m and a could-be-module which would check if the object
  being built is part of any kconfig build which could ever lead to it
  being part of a module, and if so define a new define
  -DPOSSIBLE_MODULE [0].

  A more obvious yet theoretical approach I've suggested would be to
  have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
  well but that means getting kconfig symbol names mapping to modules
  always, and I don't think that's the case today. I am not aware of
  Nick or anyone exploring either of these options. Quite recently Josh
  Poimboeuf has pointed out that live patching, kprobes and BPF would
  benefit from resolving some part of the disambiguation as well but for
  other reasons. The function granularity KASLR (fgkaslr) patches were
  mentioned but Joe Lawrence has clarified this effort has been dropped
  with no clear solution in sight [1].

  In the meantime removing module license tags from code which could
  never be modules is welcomed for both objectives mentioned above. Some
  developers have also welcomed these changes as it has helped clarify
  when a module was never possible and they forgot to clean this up, and
  so you'll see quite a bit of Nick's patches in other pull requests for
  this merge window. I just picked up the stragglers after rc3. LWN has
  good coverage on the motivation behind this work [2] and the typical
  cross-tree issues he ran into along the way. The only concrete blocker
  issue he ran into was that we should not remove the MODULE_LICENSE()
  tags from files which have no SPDX tags yet, even if they can never be
  modules. Nick ended up giving up on his efforts due to having to do
  this vetting and backlash he ran into from folks who really did *not
  understand* the core of the issue nor were providing any alternative /
  guidance. I've gone through his changes and dropped the patches which
  dropped the module license tags where an SPDX license tag was missing,
  it only consisted of 11 drivers. To see if a pull request deals with a
  file which lacks SPDX tags you can just use:

    ./scripts/spdxcheck.py -f \
	$(git diff --name-only commid-id | xargs echo)

  You'll see a core module file in this pull request for the above, but
  that's not related to his changes. WE just need to add the SPDX
  license tag for the kernel/module/kmod.c file in the future but it
  demonstrates the effectiveness of the script.

  Most of Nick's changes were spread out through different trees, and I
  just picked up the slack after rc3 for the last kernel was out. Those
  changes have been in linux-next for over two weeks.

  The cleanups, debug code I added and final fix I added for modules
  were motivated by David Hildenbrand's report of boot failing on a
  systems with over 400 CPUs when KASAN was enabled due to running out
  of virtual memory space. Although the functional change only consists
  of 3 lines in the patch "module: avoid allocation if module is already
  present and ready", proving that this was the best we can do on the
  modules side took quite a bit of effort and new debug code.

  The initial cleanups I did on the modules side of things has been in
  linux-next since around rc3 of the last kernel, the actual final fix
  for and debug code however have only been in linux-next for about a
  week or so but I think it is worth getting that code in for this merge
  window as it does help fix / prove / evaluate the issues reported with
  larger number of CPUs. Userspace is not yet fixed as it is taking a
  bit of time for folks to understand the crux of the issue and find a
  proper resolution. Worst come to worst, I have a kludge-of-concept [3]
  of how to make kernel_read*() calls for modules unique / converge
  them, but I'm currently inclined to just see if userspace can fix this
  instead"

Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]

* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
  module: add debugging auto-load duplicate module support
  module: stats: fix invalid_mod_bytes typo
  module: remove use of uninitialized variable len
  module: fix building stats for 32-bit targets
  module: stats: include uapi/linux/module.h
  module: avoid allocation if module is already present and ready
  module: add debug stats to help identify memory pressure
  module: extract patient module check into helper
  modules/kmod: replace implementation with a semaphore
  Change DEFINE_SEMAPHORE() to take a number argument
  module: fix kmemleak annotations for non init ELF sections
  module: Ignore L0 and rename is_arm_mapping_symbol()
  module: Move is_arm_mapping_symbol() to module_symbol.h
  module: Sync code of is_arm_mapping_symbol()
  scripts/gdb: use mem instead of core_layout to get the module address
  interconnect: remove module-related code
  interconnect: remove MODULE_LICENSE in non-modules
  zswap: remove MODULE_LICENSE in non-modules
  zpool: remove MODULE_LICENSE in non-modules
  x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
  ...

Commit 75cff725 ("driver core: bus: mark the struct bus_type for
sysfs callbacks as constant") missed at least one case - the CDX bus
driver.  Probably because Greg didn't notice the build failure, because
it only ends up being enabled on arm64.

And I missed it during the merge, because while I do arm64 builds these
days, I don't do them in between each pull.  So it took a while for me
to notice the breakage, rather than me just fixing it in the driver core
merge that brought this failure case in.

Maybe we should remove the CDX_BUS dependency on arm64 when COMPILE_TEST
is on?

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nipun Gupta <nipun.gupta@amd.com>
Cc: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):

    BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
    Read of size 8 at addr 000000006d640a48 by task swapper/0

    CPU: 0 PID: 0 Comm: swapper Tainted: G        W  O       6.3.0-rc1 #7
    Stack:
     60c4f20f 0c203d48 41b58ab3 60f224fc
     600477fa 60f35687 60c4f20f 601273dd
     00000008 6101eb00 6101eab0 615be548
    Call Trace:
     [<60047a58>] show_stack+0x25e/0x282
     [<60c609e0>] dump_stack_lvl+0x96/0xfd
     [<60c50d4c>] print_report+0x1a7/0x5a8
     [<603078d3>] kasan_report+0xc1/0xe9
     [<60308950>] __asan_report_load8_noabort+0x1b/0x1d
     [<60232844>] irq_work_run_list+0x11a/0x13a
     [<602328b4>] irq_work_tick+0x24/0x34
     [<6017f9dc>] update_process_times+0x162/0x196
     [<6019f335>] tick_sched_handle+0x1a4/0x1c3
     [<6019fd9e>] tick_sched_timer+0x79/0x10c
     [<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
     [<60182913>] hrtimer_interrupt+0x16c/0x2c4
     [<600486a3>] um_timer+0x164/0x183
     [...]

    Allocated by task 411:
     save_stack_trace+0x99/0xb5
     stack_trace_save+0x81/0x9b
     kasan_save_stack+0x2d/0x54
     kasan_set_track+0x34/0x3e
     kasan_save_alloc_info+0x25/0x28
     ____kasan_kmalloc+0x8b/0x97
     __kasan_kmalloc+0x10/0x12
     __kmalloc+0xb2/0xe8
     load_elf_phdrs+0xee/0x182
     [...]

    The buggy address belongs to the object at 000000006d640800
     which belongs to the cache kmalloc-1k of size 1024
    The buggy address is located 584 bytes inside of
     freed 1024-byte region [000000006d640800, 000000006d640c00)

Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.

Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.

Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 15693458 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Link: https://lkml.kernel.org/r/ZEYpTAufVHTvsO1n@cleoSigned-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

With W=1 on platforms that use the generic gcc library routines
(csky/loongarch/mips/riscv/sh/xtensa):

    lib/ashldi3.c:9:19: warning: no previous prototype for '__ashldi3' [-Wmissing-prototypes]
	9 | long long notrace __ashldi3(long long u, word_type b)
	  |                   ^~~~~~~~~
      CC      lib/ashrdi3.o
    lib/ashrdi3.c:9:19: warning: no previous prototype for '__ashrdi3' [-Wmissing-prototypes]
	9 | long long notrace __ashrdi3(long long u, word_type b)
	  |                   ^~~~~~~~~
      CC      lib/cmpdi2.o
    lib/cmpdi2.c:9:19: warning: no previous prototype for '__cmpdi2' [-Wmissing-prototypes]
	9 | word_type notrace __cmpdi2(long long a, long long b)
	  |                   ^~~~~~~~
      CC      lib/lshrdi3.o
    lib/lshrdi3.c:9:19: warning: no previous prototype for '__lshrdi3' [-Wmissing-prototypes]
	9 | long long notrace __lshrdi3(long long u, word_type b)
	  |                   ^~~~~~~~~
      CC      lib/muldi3.o
    lib/muldi3.c:49:19: warning: no previous prototype for '__muldi3' [-Wmissing-prototypes]
       49 | long long notrace __muldi3(long long u, long long v)
	  |                   ^~~~~~~~
      CC      lib/ucmpdi2.o
    lib/ucmpdi2.c:8:19: warning: no previous prototype for '__ucmpdi2' [-Wmissing-prototypes]
	8 | word_type notrace __ucmpdi2(unsigned long long a, unsigned long long b)
	  |                   ^~~~~~~~~

Fix this by adding forward declarations to the common libgcc header
file.

Link: https://lkml.kernel.org/r/5cdbe08296693dd53849f199c3933e16e97b33c1.1682088593.git.geert+renesas@glider.beSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: kernel test robot <lkp@intel.com>
  Link: https://lore.kernel.org/oe-kbuild-all/202303272214.RxzpA6bP-lkp@intel.com/Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

0Day/LKP reported a performance regression for commit 7e12beb8
("migrate_pages: batch flushing TLB").  In the commit, the TLB flushing
during page migration is batched.  So, in try_to_migrate_one(),
ptep_clear_flush() is replaced with set_tlb_ubc_flush_pending().  In
further investigation, it is found that the TLB flushing can be avoided in
ptep_clear_flush() if the PTE is inaccessible.  In fact, we can optimize
in similar way for the batched TLB flushing too to improve the
performance.

So in this patch, we check pte_accessible() before
set_tlb_ubc_flush_pending() in try_to_unmap/migrate_one().  Tests show
that the benchmark score of the anon-cow-rand-mt test case of
vm-scalability test suite can improve up to 2.1% with the patch on a Intel
server machine.  The TLB flushing IPI can reduce up to 44.3%.

Link: https://lore.kernel.org/oe-lkp/202303192325.ecbaf968-yujie.liu@intel.com
Link: https://lore.kernel.org/oe-lkp/ab92aaddf1b52ede15e2c608696c36765a2602c1.camel@intel.com/
Link: https://lkml.kernel.org/r/20230424065408.188498-1-ying.huang@intel.com
Fixes: 7e12beb8 ("migrate_pages: batch flushing TLB")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Xin Hao <xhao@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Prevent tmpfs instances mounted in an unprivileged namespaces from evading
accounting of locked memory by using the "noswap" mount option.

Link: https://lkml.kernel.org/r/20230420-faxen-advokat-40abb4c1a152@braunerSigned-off-by: Christian Brauner <brauner@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
  Link: https://lore.kernel.org/lkml/79eae9fe-7818-a65c-89c6-138b55d609a@google.comReviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Inserting Ivan Orlov's syzbot fix commit 2ce0bdfe
("mm: khugepaged: fix kernel BUG in hpage_collapse_scan_file()")
ahead of Jiaqi Yan's and David Stevens's commits
12904d95 ("mm/khugepaged: recover from poisoned file-backed memory")
cae106dd ("mm/khugepaged: refactor collapse_file control flow")
ac492b9c ("mm/khugepaged: skip shmem with userfaultfd")
(all of which restructure collapse_file()) did not work out well.

xfstests generic/086 on huge tmpfs (with accelerated khugepaged) freezes
(if not on the first attempt, then the 2nd or 3rd) in find_lock_entries()
while doing drop_caches: the file's xarray seems to have been corrupted,
with find_get_entry() returning nonsense which makes no progress.

Bisection led to ac492b9c; and diff against earlier working linux-next
suggested that it's probably down to an errant xas_store(), which does not
belong with the later changes (and nor does the positioning of warnings). 
The later changes look as if they fix the syzbot issue independently.

Remove most of what's left of 2ce0bdfe: just leave one WARN_ON_ONCE
(xas_error) after the final xas_store() of the multi-index entry.

Link: https://lkml.kernel.org/r/b6c881-c352-bb91-85a8-febeb09dfd71@google.comSigned-off-by: Hugh Dickins <hughd@google.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull char/misc drivers updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystems for
  6.4-rc1.

  It's pretty big, but due to the removal of pcmcia drivers, almost
  breaks even for number of lines added vs. removed, a nice change.

  Included in here are:

   - removal of unused PCMCIA drivers (finally!)

   - Interconnect driver updates and additions

   - Lots of IIO driver updates and additions

   - MHI driver updates

   - Coresight driver updates

   - NVMEM driver updates, which required some OF updates

   - W1 driver updates and a new maintainer to manage the subsystem

   - FPGA driver updates

   - New driver subsystem, CDX, for AMD systems

   - lots of other small driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
  mcb-lpc: Reallocate memory region to avoid memory overlapping
  mcb-pci: Reallocate memory region to avoid memory overlapping
  mcb: Return actual parsed size when reading chameleon table
  kernel/configs: Drop Android config fragments
  virt: acrn: Replace obsolete memalign() with posix_memalign()
  spmi: Add a check for remove callback when removing a SPMI driver
  spmi: fix W=1 kernel-doc warnings
  spmi: mtk-pmif: Drop of_match_ptr for ID table
  spmi: pmic-arb: Convert to platform remove callback returning void
  spmi: mtk-pmif: Convert to platform remove callback returning void
  spmi: hisi-spmi-controller: Convert to platform remove callback returning void
  w1: gpio: remove unnecessary ENOMEM messages
  w1: omap-hdq: remove unnecessary ENOMEM messages
  w1: omap-hdq: add SPDX tag
  w1: omap-hdq: allow compile testing
  w1: matrox: remove unnecessary ENOMEM messages
  w1: matrox: use inline over __inline__
  w1: matrox: switch from asm to linux header
  w1: ds2482: do not use assignment in if condition
  w1: ds2482: drop unnecessary header
  ...

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...

Pull staging driver updates from Greg KH:
 "Here is the large set of staging driver updates for 6.4-rc1. Once
  again, we removed more code than was added, a nice trend.

  It was a calm cycle, mostly all just small coding style cleanups,
  included in here are:

   - removal of the greybus loopback testing tools, userspace code that
     didn't belong in a driver subdirectory and was causing problems for
     some build systems

   - platform remove callback cleanups

   - rtl8192e huge cleanups

   - other small staging driver cleanups.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (185 commits)
  staging: rtl8192e: Fix W_DISABLE# does not work after stop/start
  staging: rtl8192e: Remove unchanged variables bfsync_processing and more
  staging: rtl8192e: Remove unchanged variable frame_sync_monitor
  staging: rtl8192e: Remove unchanged variable chan_forced
  staging: rtl8192e: Remove set to true while true of bfirst_after_down
  staging: rtl8192e: Remove second initialization of bActuallySet
  staging: rtl8192e: Remove unused macro RT_SET_PS_LEVEL
  staging: rtl8192e: Remove unused function rtl92e_disable_nic
  staging: rtl8192e: Remove unchanged variable RegRfPsLevel
  staging: rtl8172: Add blank lines after declarations
  staging: rtl8192e: Remove unused variable RF_Type
  staging: rtl8192e: Remove one of two checks for hardware RTL8192SE
  staging: rtl8192e: Remove unused function _rtl92e_dm_init_wa_broadcom_iot
  staging: rtl8192e: Remove macro IS_HARDWARE_TYPE_8192SE
  staging: greybus: drop loopback test files
  staging: rtl8192e: Add blank lines after declarations
  staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPDecryptErrors>
  staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPReplays>
  staging: rtl8192e: avoid CamelCase <dot11RSNAStatsCCMPFormatErrors>
  staging: rtl8192e: fix alignment to match open parenthesis
  ...

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.4-rc1.

  Nothing major, just lots of tiny, constant, forward development. This
  includes:

   - obligatory n_gsm updates and feature additions

   - 8250_em driver updates

   - sh-sci driver updates

   - dts cleanups and updates

   - general cleanups and improvements by Ilpo and Jiri

   - other small serial driver core fixes and driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
  n_gsm: Use array_index_nospec() with index that comes from userspace
  tty: vt: drop checks for undefined VT_SINGLE_DRIVER
  tty: vt: distribute EXPORT_SYMBOL()
  tty: vt: simplify some cases in tioclinux()
  tty: vt: reformat tioclinux()
  tty: serial: sh-sci: Fix end of transmission on SCI
  tty: serial: sh-sci: Add support for tx end interrupt handling
  tty: serial: sh-sci: Fix TE setting on SCI IP
  tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
  tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
  serial: max310x: fix IO data corruption in batched operations
  serial: core: Disable uart_start() on uart_remove_one_port()
  serial: 8250: Reinit port->pm on port specific driver unbind
  serial: 8250: Add missing wakeup event reporting
  tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
  tty: serial: fsl_lpuart: adjust buffer length to the intended size
  serial: fix TIOCSRS485 locking
  serial: make SiFive serial drivers depend on ARCH_ symbols
  tty: synclink_gt: don't allocate and pass dummy flags
  tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.4-rc1.

  The "biggest" thing in here is the removal of two obsolete drivers,
  u132-hcd and ftdi-elan, making this a net-removal of code overall.

  Other than the driver removals, included in here are:

   - Thunderbolt updates for new hardware and features

   - xhci driver updates and fixes

   - dwc3 driver updates and fixes

   - gadget core and driver updates and features added

   - mtu3 driver updates

   - dwc2 driver fixes and updates

   - usb-serial driver updates

   - typec driver updates and fixes

   - platform remove callback changes

   - dts updates and conversions

   - other small changes

  All have been in linux-next for a while with no reported problems"

* tag 'usb-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (177 commits)
  usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API
  usb: dwc3: gadget: Execute gadget stop after halting the controller
  media: radio-shark: Add endpoint checks
  USB: sisusbvga: Add endpoint checks
  USB: core: Add routines for endpoint checks in old drivers
  usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive
  dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk
  usb: dwc3: core: add support for disabling High-speed park mode
  dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs
  usb: mtu3: add optional clock xhci_ck and frmcnt_ck
  dt-bindings: usb: mtu3: add two optional clocks
  usb: mtu3: expose role-switch control to userspace
  usb: mtu3: unlock @mtu->lock just before giving back request
  usb: mtu3: fix kernel panic at qmu transfer done irq handler
  usb: mtu3: use boolean return value
  usb: mtu3: give back request when rx error happens
  usb: chipidea: fix missing goto in `ci_hdrc_probe`
  usb: gadget: udc: core: Prevent redundant calls to pullup
  usb: gadget: udc: core: Invoke usb_gadget_connect only when started
  usb: typec: ucsi: don't print PPM init deferred errors
  ...

Pull firewire updates from Takashi Sakamoto:
 "The pull request includes a few changes, Its main purpose is to
  prepare for my future work by taking over maintainership from Stefan
  Richter. I have plans to work on several items; e.g. packet processing
  in workqueue context instead of tasklet.

  As you may be aware, the IEEE 1394 technology is outdated. However, we
  still have users. It is better to ensure a smooth transition for the
  users to shift to other categories of devices"

* tag 'firewire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: init_ohci1394_dma: use correct function names in comments
  MAINTAINERS: replace maintainer of FireWire subsystem