Ensure /proc/*/status doesn't print 'random' cpumasks due to
migrate_disable().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.593984734@infradead.org

In order to minimize the interference of migrate_disable() on lower
priority tasks, which can be deprived of runtime due to being stuck
below a higher priority task. Teach the RT/DL balancers to push away
these higher priority tasks when a lower priority task gets selected
to run on a freshly demoted CPU (pull).

This adds migration interference to the higher priority task, but
restores bandwidth to system that would otherwise be irrevocably lost.
Without this it would be possible to have all tasks on the system
stuck on a single CPU, each task preempted in a migrate_disable()
section with a single high priority task running.

This way we can still approximate running the M highest priority tasks
on the system.

Migrating the top task away is (ofcourse) still subject to
migrate_disable() too, which means the lower task is subject to an
interference equivalent to the worst case migrate_disable() section.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.499155098@infradead.org

There's a valid ->pi_lock recursion issue where the actual PI code
tries to wake up the stop task. Make lockdep aware so it doesn't
complain about this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.406912197@infradead.org

We want migrate_disable() tasks to get PULLs in order for them to PUSH
away the higher priority task.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.310519774@infradead.org

Replace a bunch of cpumask_any*() instances with
cpumask_any*_distribute(), by injecting this little bit of random in
cpu selection, we reduce the chance two competing balance operations
working off the same lowest_mask pick the same CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.190759694@infradead.org

On CPU unplug tasks which are in a migrate disabled region cannot be pushed
to a different CPU until they returned to migrateable state.

Account the number of tasks on a runqueue which are in a migrate disabled
section and make the hotplug wait mechanism respect that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.067278757@infradead.org

Concurrent migrate_disable() and set_cpus_allowed_ptr() has
interesting features. We rely on set_cpus_allowed_ptr() to not return
until the task runs inside the provided mask. This expectation is
exported to userspace.

This means that any set_cpus_allowed_ptr() caller must wait until
migrate_enable() allows migrations.

At the same time, we don't want migrate_enable() to schedule, due to
patterns like:

	preempt_disable();
	migrate_disable();
	...
	migrate_enable();
	preempt_enable();

And:

	raw_spin_lock(&B);
	spin_unlock(&A);

this means that when migrate_enable() must restore the affinity
mask, it cannot wait for completion thereof. Luck will have it that
that is exactly the case where there is a pending
set_cpus_allowed_ptr(), so let that provide storage for the async stop
machine.

Much thanks to Valentin who used TLA+ most effective and found lots of
'interesting' cases.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.921768277@infradead.org

Add the base migrate_disable() support (under protest).

While migrate_disable() is (currently) required for PREEMPT_RT, it is
also one of the biggest flaws in the system.

Notably this is just the base implementation, it is broken vs
sched_setaffinity() and hotplug, both solved in additional patches for
ease of review.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.818170844@infradead.org

Thread a u32 flags word through the *set_cpus_allowed*() callchain.
This will allow adding behavioural tweaks for future users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.729082820@infradead.org

Since we now migrate tasks away before DYING, we should also move
bandwidth unthrottle, otherwise we can gain tasks from unthrottle
after we expect all tasks to be gone already.

Also; it looks like the RT balancers don't respect cpu_active() and
instead rely on rq->online in part, complete this. This too requires
we do set_rq_offline() earlier to match the cpu_active() semantics.
(The bigger patch is to convert RT to cpu_active() entirely)

Since set_rq_online() is called from sched_cpu_activate(), place
set_rq_offline() in sched_cpu_deactivate().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.639538965@infradead.org

With the new mechanism which kicks tasks off the outgoing CPU at the end of
schedule() the situation on an outgoing CPU right before the stopper thread
brings it down completely is:

 - All user tasks and all unbound kernel threads have either been migrated
   away or are not running and the next wakeup will move them to a online CPU.

 - All per CPU kernel threads, except cpu hotplug thread and the stopper
   thread have either been unbound or parked by the responsible CPU hotplug
   callback.

That means that at the last step before the stopper thread is invoked the
cpu hotplug thread is the last legitimate running task on the outgoing
CPU.

Add a final wait step right before the stopper thread is kicked which
ensures that any still running tasks on the way to park or on the way to
kick themself of the CPU are either sleeping or gone.

This allows to remove the migrate_tasks() crutch in sched_cpu_dying(). If
sched_cpu_dying() detects that there is still another running task aside of
the stopper thread then it will explode with the appropriate fireworks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.547163969@infradead.org

Don't rely on the scheduler to force break affinity for us -- it will
stop doing that for per-cpu-kthreads.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.464718669@infradead.org

RT kernels need to ensure that all tasks which are not per CPU kthreads
have left the outgoing CPU to guarantee that no tasks are force migrated
within a migrate disabled section.

There is also some desire to (ab)use fine grained CPU hotplug control to
clear a CPU from active state to force migrate tasks which are not per CPU
kthreads away for power control purposes.

Add a mechanism which waits until all tasks which should leave the CPU
after the CPU active flag is cleared have moved to a different online CPU.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.377836842@infradead.org

In preparation for migrate_disable(), make sure only per-cpu kthreads
are allowed to run on !active CPUs.

This is ran (as one of the very first steps) from the cpu-hotplug
task which is a per-cpu kthread and completion of the hotplug
operation only requires such tasks.

This constraint enables the migrate_disable() implementation to wait
for completion of all migrate_disable regions on this CPU at hotplug
time without fear of any new ones starting.

This replaces the unlikely(rq->balance_callbacks) test at the tail of
context_switch with an unlikely(rq->balance_work), the fast path is
not affected.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.292709163@infradead.org

The intent of balance_callback() has always been to delay executing
balancing operations until the end of the current rq->lock section.
This is because balance operations must often drop rq->lock, and that
isn't safe in general.

However, as noted by Scott, there were a few holes in that scheme;
balance_callback() was called after rq->lock was dropped, which means
another CPU can interleave and touch the callback list.

Rework code to call the balance callbacks before dropping rq->lock
where possible, and otherwise splice the balance list onto a local
stack.

This guarantees that the balance list must be empty when we take
rq->lock. IOW, we'll only ever run our own balance callbacks.
Reported-by: Scott Wood <swood@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.203901269@infradead.org

Crashes in stop-machine are hard to connect to the calling code, add a
little something to help with that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.116513635@infradead.org

Pull tracing fix from Steven Rostedt:
 "Fix synthetic event "strcat" overrun

  New synthetic event code used strcat() and miscalculated the ending,
  causing the concatenation to write beyond the allocated memory.

  Instead of using strncat(), the code is switched over to seq_buf which
  has all the mechanisms in place to protect against writing more than
  what is allocated, and cleans up the code a bit"

* tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing, synthetic events: Replace buggy strcat() with seq_buf operations

Pull x86 fixes from Thomas Gleixner:
 "A couple of x86 fixes which missed rc1 due to my stupidity:

   - Drop lazy TLB mode before switching to the temporary address space
     for text patching.

     text_poke() switches to the temporary mm which clears the lazy mode
     and restores the original mm afterwards. Due to clearing lazy mode
     this might restore a already dead mm if exit_mmap() runs in
     parallel on another CPU.

   - Document the x32 syscall design fail vs. syscall numbers 512-547
     properly.

   - Fix the ORC unwinder to handle the inactive task frame correctly.

     This was unearthed due to the slightly different code generation of
     gcc-10.

   - Use an up to date screen_info for the boot params of kexec instead
     of the possibly stale and invalid version which happened to be
     valid when the kexec kernel was loaded"

* tag 'x86-urgent-2020-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternative: Don't call text_poke() in lazy TLB mode
  x86/syscalls: Document the fact that syscalls 512-547 are a legacy mistake
  x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels
  hyperv_fb: Update screen_info after removing old framebuffer
  x86/kexec: Use up-to-dated screen_info copy to fill boot params

Pull orphan section fixes from Kees Cook:
 "A couple corner cases were found from the link-time orphan section
  handling series:

   - arm: handle .ARM.exidx and .ARM.extab sections (Nathan Chancellor)

   - x86: collect .ctors.* with .ctors (Kees Cook)"

* tag 'orphan-handling-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  arm/build: Always handle .ARM.exidx and .ARM.extab sections
  vmlinux.lds.h: Keep .ctors.* with .ctors

With e.g. m68k/defconfig:

    mm/process_vm_access.c: In function ‘process_vm_rw’:
    mm/process_vm_access.c:277:5: error: implicit declaration of function ‘in_compat_syscall’ [-Werror=implicit-function-declaration]
      277 |     in_compat_syscall());
	  |     ^~~~~~~~~~~~~~~~~

Fix this by adding #include <linux/compat.h>.

Reported-by: noreply@ellerman.id.au
Reported-by: damian <damian.tometzki@familie-tometzki.de>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 38dc5079 ("Fix compat regression in process_vm_rw()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After turning on warnings for orphan section placement, enabling
CONFIG_UNWINDER_FRAME_POINTER instead of CONFIG_UNWINDER_ARM causes
thousands of warnings when clang + ld.lld are used:

$ scripts/config --file arch/arm/configs/multi_v7_defconfig \
                 -d CONFIG_UNWINDER_ARM \
                 -e CONFIG_UNWINDER_FRAME_POINTER
$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 defconfig zImage
ld.lld: warning: init/built-in.a(main.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.ref.text) is being placed in '.ARM.extab.ref.text'
ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(do_mounts_initrd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab) is being placed in '.ARM.extab'
ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text'
ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab) is being placed in '.ARM.extab'

These sections are handled by the ARM_UNWIND_SECTIONS define, which is
only added to the list of sections when CONFIG_ARM_UNWIND is set.
CONFIG_ARM_UNWIND is a hidden symbol that is only selected when
CONFIG_UNWINDER_ARM is set so CONFIG_UNWINDER_FRAME_POINTER never
handles these sections. According to the help text of
CONFIG_UNWINDER_ARM, these sections should be discarded so that the
kernel image size is not affected.

Fixes: 5a17850e ("arm/build: Warn on orphan section placement")
Link: https://github.com/ClangBuiltLinux/linux/issues/1152Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Review-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
[kees: Made the discard slightly more specific]
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200928224854.3224862-1-natechancellor@gmail.com

Under some circumstances, the compiler generates .ctors.* sections. This
is seen doing a cross compile of x86_64 from a powerpc64el host:

x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being
placed in section `.ctors.65435'

Include these orphans along with the regular .ctors section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 83109d5d ("x86/build: Warn on orphan section placement")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20201005025720.2599682-1-keescook@chromium.org

Pull devicetree fixes from Rob Herring:

 - More binding additionalProperties/unevaluatedProperties additions

 - More yamllint fixes on additions in the merge window

 - CrOS embedded controller schema updates to fix warnings

 - LEDs schema update adding ID_RGB

 - A reserved-memory fix for regions starting at address 0x0

* tag 'devicetree-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties'
  dt-bindings: Explicitly allow additional properties in board/SoC schemas
  dt-bindings: More whitespace clean-ups in schema files
  mfd: google,cros-ec: add missing properties
  dt-bindings: input: convert cros-ec-keyb to json-schema
  dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema
  of: Fix reserved-memory overlap detection
  dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells value
  dt-bindings: leds: Update devicetree documents for ID_RGB

The removal of compat_process_vm_{readv,writev} didn't change
process_vm_rw(), which always assumes it's not doing a compat syscall.

Instead of passing in 'false' unconditionally for 'compat', make it
conditional on in_compat_syscall().

[ Both Al and Christoph point out that trying to access a 64-bit process
  from a 32-bit one cannot work anyway, and is likely better prohibited,
  but that's a separate issue    - Linus ]

Fixes: c3973b40 ("mm: remove compat_process_vm_{readv,writev}")
Reported-and-tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There was a memory corruption bug happening while running the synthetic
event selftests:

 kmemleak: Cannot insert 0xffff8c196fa2afe5 into the object search tree (overlaps existing)
 CPU: 5 PID: 6866 Comm: ftracetest Tainted: G        W         5.9.0-rc5-test+ #577
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
 Call Trace:
  dump_stack+0x8d/0xc0
  create_object.cold+0x3b/0x60
  slab_post_alloc_hook+0x57/0x510
  ? tracing_map_init+0x178/0x340
  __kmalloc+0x1b1/0x390
  tracing_map_init+0x178/0x340
  event_hist_trigger_func+0x523/0xa40
  trigger_process_regex+0xc5/0x110
  event_trigger_write+0x71/0xd0
  vfs_write+0xca/0x210
  ksys_write+0x70/0xf0
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fef0a63a487
 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007fff76f18398 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000000039 RCX: 00007fef0a63a487
 RDX: 0000000000000039 RSI: 000055eb3b26d690 RDI: 0000000000000001
 RBP: 000055eb3b26d690 R08: 000000000000000a R09: 0000000000000038
 R10: 000055eb3b2cdb80 R11: 0000000000000246 R12: 0000000000000039
 R13: 00007fef0a70b500 R14: 0000000000000039 R15: 00007fef0a70b700
 kmemleak: Kernel memory leak detector disabled
 kmemleak: Object 0xffff8c196fa2afe0 (size 8):
 kmemleak:   comm "ftracetest", pid 6866, jiffies 4295082531
 kmemleak:   min_count = 1
 kmemleak:   count = 0
 kmemleak:   flags = 0x1
 kmemleak:   checksum = 0
 kmemleak:   backtrace:
      __kmalloc+0x1b1/0x390
      tracing_map_init+0x1be/0x340
      event_hist_trigger_func+0x523/0xa40
      trigger_process_regex+0xc5/0x110
      event_trigger_write+0x71/0xd0
      vfs_write+0xca/0x210
      ksys_write+0x70/0xf0
      do_syscall_64+0x33/0x40
      entry_SYSCALL_64_after_hwframe+0x44/0xa9

The cause came down to a use of strcat() that was adding an string that was
shorten, but the strcat() did not take that into account.

strcat() is extremely dangerous as it does not care how big the buffer is.
Replace it with seq_buf operations that prevent the buffer from being
overwritten if what is being written is bigger than the buffer.

Fixes: 10819e25 ("tracing: Handle synthetic event array field type checking correctly")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The code to try to shut up sparse warnings about questionable locking
didn't shut up sparse: it made the result not parse as valid C at all,
since the end result now has a label with no statement.

The proper fix is to just always lock the hardware, the same way Bart
did in commit 8ae17876 ("scsi: qla2xxx: Simplify the functions for
dumping firmware").  That avoids the whole problem with having locking
that is not statically obvious.

But in the meantime, just remove the incorrect attempt at trying to
avoid a sparse warning that just made things worse.

This was exposed by commit 3e6efab8 ("scsi: qla2xxx: Fix reset of
MPI firmware"), very similarly to how commit cbb01c2f ("scsi:
qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem
in another place, and caused that commit 8ae17876.

Please don't add code to just shut up sparse without actually fixing
what sparse complains about.
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Arun Easi <aeasi@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A couple of um files ended up not including the header file that defines
the __section() macro, and the simplest fix is to just revert the change
for those files.

Fixes: 33def849 treewide: Convert macro and uses of __section(foo) to __section("foo")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Another round of wack-a-mole. The json-schema default is additional
unknown properties are allowed, but for DT all properties should be
defined.
Signed-off-by: Rob Herring <robh@kernel.org>

In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As the top-level
board/SoC schemas always have additional properties, add
'additionalProperties: true'.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201005183830.486085-4-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Clean-up incorrect indentation, extra spaces, and missing EOF newline in
schema files. Most of the clean-ups are for list indentation which
should always be 2 spaces more than the preceding keyword.

Found with yamllint (now integrated into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for display
Acked-by:  Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Signed-off-by: Rob Herring <robh@kernel.org>

Add missing properties that are currently used in the examples of
subnode bindings and in many DTs.

Also updates the example in sound/google,cros-ec-codec.yaml to comply
with the google,cros-ec binding.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Link: https://lore.kernel.org/r/20201021114308.25485-4-ricardo.canuelo@collabora.com
[robh: Add missing '#address-cells' and '#size-cells']
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the google,cros-ec-keyb binding to YAML and add it as a property
of google,cros-ec.yaml
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Link: https://lore.kernel.org/r/20201021114308.25485-3-ricardo.canuelo@collabora.comSigned-off-by: Rob Herring <robh@kernel.org>

Convert the google,cros-ec-i2c-tunnel binding to YAML and add it as a
property of google,cros-ec.yaml.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Link: https://lore.kernel.org/r/20201021114308.25485-2-ricardo.canuelo@collabora.com
[robh: add ref to i2c-controller.yaml]
Signed-off-by: Rob Herring <robh@kernel.org>

Pull crypto fix from Herbert Xu:
 "This fixes a regression in x86/poly1305"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/poly1305 - add back a needed assignment

If ->readpage returns an error, it has already unlocked the page.

Fixes: 5e929b33 ("CacheFiles: Handle truncate unlocking the page we're reading")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull s390 fix from Heiko Carstens:
 "Fix s390 compile breakage caused by commit 33def849 ("treewide:
  Convert macro and uses of __section(foo) to __section("foo")")"

* tag 's390-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: correct __bootdata / __bootdata_preserved macros

Currently s390 build is broken.

  SECTCMP .boot.data
error: section .boot.data differs between vmlinux and arch/s390/boot/compressed/vmlinux
make[2]: *** [arch/s390/boot/section_cmp.boot.data] Error 1
  SECTCMP .boot.preserved.data
error: section .boot.preserved.data differs between vmlinux and arch/s390/boot/compressed/vmlinux
make[2]: *** [arch/s390/boot/section_cmp.boot.preserved.data] Error 1
make[1]: *** [bzImage] Error 2

Commit 33def849 ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") converted all __section(foo) to __section("foo").
This is wrong for __bootdata / __bootdata_preserved macros which want
variable names to be a part of intermediate section names .boot.data.<var
name> and .boot.preserved.data.<var name>. Those sections are later
sorted by alignment + name and merged together into final .boot.data
/ .boot.preserved.data sections. Those sections must be identical in
the decompressor and the decompressed kernel (that is checked during
the build).

Fixes: 33def849 ("treewide: Convert macro and uses of __section(foo) to __section("foo")")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The reserved-memory overlap detection code fails to detect overlaps if
either of the regions starts at address 0x0.  The code explicitly checks
for and ignores such regions, apparently in order to ignore dynamically
allocated regions which have an address of 0x0 at this point.  These
dynamically allocated regions also have a size of 0x0 at this point, so
fix this by removing the check and sorting the dynamically allocated
regions ahead of any static regions at address 0x0.

For example, there are two overlaps in this case but they are not
currently reported:

	foo@0 {
	        reg = <0x0 0x2000>;
	};

	bar@0 {
	        reg = <0x0 0x1000>;
	};

	baz@1000 {
	        reg = <0x1000 0x1000>;
	};

	quux {
	        size = <0x1000>;
	};

but they are after this patch:

 OF: reserved mem: OVERLAP DETECTED!
 bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000)
 OF: reserved mem: OVERLAP DETECTED!
 foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000)
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.comSigned-off-by: Rob Herring <robh@kernel.org>

As the binding documentation says, #mbox-cells must have a value of 2,
but the example use a value 3. The MT8173 device tree correctly use
mbox-cells = <2>. This commit fixes the example.

Fixes: 19d8e335 ("dt-binding: gce: remove atomic_exec in mboxes property")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20201018193016.3339045-1-fparent@baylibre.comSigned-off-by: Rob Herring <robh@kernel.org>

Update the leds/common.yaml to indicate that the max color ID is 9.
Reflect the same change in the leds-class-multicolor.yaml
Reported-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201016115703.30184-1-dmurphy@ti.comSigned-off-by: Rob Herring <robh@kernel.org>