Add PEX deep power down states as pinctrl properties to set in PCIe driver.
In Tegra210, BIAS pads are not in power down mode when clamps are applied.
To set the pads in DPD, pass the PEX DPD states as pinctrl properties to
PCIe driver.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable ACONNECT, ADMA and AGIC devices on Jetson TX2 and Jetson AGX
Xavier.

Verified driver probe path and devices get registered fine.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add device tree nodes for the ACONNECT, ADMA and AGIC devices on
Tegra186 and Tegra194.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Device tree nodes without unit-address are to be sorted alphabetically.
Signed-off-by: Thierry Reding <treding@nvidia.com>

There are a few issues with the GPU regulator defined for Jetson Nano
which are:

1. The GPU regulator is a PWM based regulator and not a fixed voltage
   regulator.
2. The output voltages for the GPU regulator are not correct.
3. The regulator enable ramp delay is too short for the regulator and
   needs to be increased. 2ms should be sufficient.
4. This is the same regulator used on Jetson TX1 and so make the ramp
   delay and settling time the same as Jetson TX1.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 6772cd0e ("arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support")
Signed-off-by: Thierry Reding <treding@nvidia.com>

The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which
not sufficient because the enable ramp delay has been measured to be
greater than 1ms. Furthermore, the downstream kernels released by NVIDIA
for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of
160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be
2ms and add a settling delay of 160us.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 5e6b9a89 ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1")
Signed-off-by: Thierry Reding <treding@nvidia.com>

The Tegra AGIC interrupt controller is an ARM GIC400 interrupt
controller. Per the ARM GIC device-tree binding, the first address
region is for the GIC distributor registers and the second address
region is for the GIC CPU interface registers. The address space for
the distributor registers is 4kB, but currently this is incorrectly
defined as 8kB for the Tegra AGIC and overlaps with the CPU interface
registers. Correct the address space for the distributor to be 4kB.

Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: bcdbde43 ("arm64: tegra: Add AGIC node for Tegra210")
Signed-off-by: Thierry Reding <treding@nvidia.com>

There are four INA3221 chips on the Jetson TX2 (p3310 + p2771).
And each INA3221 chip has three input channels to monitor power.

So this patch adds these 12 channels to the DT of Jetson TX2, by
following the DT binding of INA3221 and official documents from
https://developer.nvidia.com/embedded/downloads

tegra186-p3310:
https://developer.nvidia.com/embedded/dlc/jetson-tx2-series-modules-oem-product-design-guide

tegra186-p2771-0000:
http://developer.nvidia.com/embedded/dlc/jetson-tx1-tx2-developer-kit-carrier-board-spec-20180618Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Signed-off-by: Thierry Reding <treding@nvidia.com>

Jetson Nano implements CPU sleep via PSCI, much like any of the other
Tegra X1 platforms. Enable the sleep states to allow the CPU to go into
lower power states when idle.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The Jetson Nano has two ID EEPROMs, one for the module and another for
the carrier board. Add both to the device tree so that they can be read
from at runtime.
Signed-off-by: Thierry Reding <treding@nvidia.com>

There is an ID EEPROM on the Jetson TX2 carrier board, part of the
Jetson TX2 Developer Kit, that exposes information that can be used to
identify the carrier board. Add the device tree node so that operating
systems can access this EEPROM.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

There is an ID EEPROM in the Jetson TX2 module that stores various bits
of information to indentify the module. Add the device tree node so that
operating systems can access this EEPROM.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

There is an ID EEPROM on the Jetson TX1 carrier board, part of the
Jetson TX1 Developer Kit, that exposes information that can be used to
identify the carrier board. Add the device tree node so that operating
systems can access this EEPROM.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

There is an ID EEPROM in the Jetson TX1 module that stores various bits
of information to indentify the module. Add the device tree node so that
operating systems can access this EEPROM.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Due to an integration issue the architected timer on Tegra210 does not
remain on during system suspend (a.k.a. SC7). Mark it accordingly so
that it isn't considered as a means to track suspend time.
Signed-off-by: Thierry Reding <treding@nvidia.com>

The architected timer on Tegra186 and Tegra194 is in an always on power
partition and its reference clock will always run, so mark the timer as
always on.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Two of the Tegra I2C controllers share pads with the DPAUX controllers.
In order for the I2C controllers to use these pads, they have to be set
into I2C mode. Use the I2C and off pin control states defined in the DT
nodes for DPAUX as "default" and "idle" states, respectively. This
ensures that the I2C controller driver can properly configure the pins
when it needs to perform I2C transactions.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Tegra186 has two CPU clusters with its own cache hierarchy. This patch
adds them with the cache information of each of the CPUs.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The GPIO expanders on Jetson TX2 are powered by the VDD_1V8 and
VDD_3V3_SYS supplies, respectively. Model this in device tree so that
the correct supplies are referenced.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Jetson Nano, Jetson TX1 and Jetson TX2 all are named "Developer Kit" and
Jetson AGX Xavier is the odd one out. It's officially also called the
"Developer Kit", not "Development Kit", so make it consistent with the
rest.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

P2888 is the internal part number for the Jetson AGX Xavier module.
Clarify that using the DT model property.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

P3310 is the internal part number for the Jetson TX2 module. Clarify
that using the DT model property.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

P2771 is the internal part number for the Jetson TX2 Developer Kit.
Clarify that using the DT model property.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Now that all users of the old definitions have been updated to use the
Tegra186 specific prefix, remove the unused definitions.
Signed-off-by: Thierry Reding <treding@nvidia.com>

In order to move away from misleadingly generic definitions of the GPIO
macros, use the Tegra186-specific prefix. These are the last remaining
occurrences. The generic definitions can be removed after this.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Pull UBIFS fixes from Richard Weinberger:

 - build errors wrt xattrs

 - mismerge which lead to a wrong Kconfig ifdef

 - missing endianness conversion

* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Convert xattr inum to host order
  ubifs: Use correct config name for encryption
  ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR

Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation

Pull more Kbuild updates from Masahiro Yamada:

 - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption

 - exclude tracked files from .gitignore

 - re-enable -Wint-in-bool-context warning

 - refactor samples/Makefile

 - stop building immediately if syncconfig fails

 - do not sprinkle error messages when $(CC) does not exist

 - move arch/alpha/defconfig to the configs subdirectory

 - remove crappy header search path manipulation

 - add comment lines to .config to clarify the end of menu blocks

 - check uniqueness of module names (adding new warnings intentionally)

* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: use 'else ifneq' for Makefile to improve readability
  kbuild: check uniqueness of module names
  kconfig: Terminate menu blocks with a comment in the generated config
  kbuild: add LICENSES to KBUILD_ALLDIRS
  kbuild: remove 'addtree' and 'flags' magic for header search paths
  treewide: prefix header search paths with $(srctree)/
  media: prefix header search paths with $(srctree)/
  media: remove unneeded header search paths
  alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
  kbuild: terminate Kconfig when $(CC) or $(LD) is missing
  kbuild: turn auto.conf.cmd into a mandatory include file
  .gitignore: exclude .get_maintainer.ignore and .gitattributes
  kbuild: add all Clang-specific flags unconditionally
  kbuild: Don't try to add '-fcatch-undefined-behavior' flag
  kbuild: add some extra warning flags unconditionally
  kbuild: add -Wvla flag unconditionally
  arch: remove dangling asm-generic wrappers
  samples: guard sub-directories with CONFIG options
  kbuild: re-enable int-in-bool-context warning
  MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
  ...

Pull i2c updates from Wolfram Sang:
 "Some I2C core API additions which are kind of simple but enhance error
  checking for users a lot, especially by returning errno now.

  There are wrappers to still support the old API but it will be removed
  once all users are converted"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: add device-managed version of i2c_new_dummy
  i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block

Pull cifs fixes from Steve French:
 "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
  related. Also adds SEEK_HOLE support"

* tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add support for SEEK_DATA and SEEK_HOLE
  Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
  cifs: Allocate memory for all iovs in smb2_ioctl
  cifs: Don't match port on SMBDirect transport
  cifs:smbd Use the correct DMA direction when sending data
  cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
  cifs: use the right include for signal_pending()
  smb3: trivial cleanup to smb2ops.c
  cifs: cleanup smb2ops.c and normalize strings
  smb3: display session id in debug data

Pull perf tooling updates from Ingo Molnar:
 "perf.data:

   - Streaming compression of perf ring buffer into
     PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x
     perf.data file size reduction on variety of tested workloads what
     saves storage space on larger server systems where perf.data size
     can easily reach several tens or even hundreds of GiBs, especially
     when profiling with DWARF-based stacks and tracing of context
     switches.

  perf record:

   - Improve -user-regs/intr-regs suggestions to overcome errors

  perf annotate:

   - Remove hist__account_cycles() from callback, speeding up branch
     processing (perf record -b)

  perf stat:

   - Add a 'percore' event qualifier, e.g.: -e
     cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for
     both hardware threads in a core.

     We can already do this with --per-core, but it's often useful to do
     this together with other metrics that are collected per hardware
     thread.

     I.e. now its possible to do this per-event, and have it mixed with
     other events not aggregated by core.

  arm64:

   - Map Brahma-B53 CPUID to cortex-a53 events.

   - Add Cortex-A57 and Cortex-A72 events.

  csky:

   - Add DWARF register mappings for libdw, allowing --call-graph=dwarf
     to work on the C-SKY arch.

  x86:

   - Add support for recording and printing XMM registers, available,
     for instance, on Icelake.

   - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON
     support. UPI replaced the Intel QuickPath Interconnect (QPI) in
     Xeon Skylake-SP.

  Intel PT:

   - Fix instructions sampling rate.

   - Timestamp fixes.

   - Improve exported-sql-viewer GUI, allowing, for instance, to
     copy'n'paste the trees, useful for e-mailing"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  perf stat: Support 'percore' event qualifier
  perf stat: Factor out aggregate counts printing
  perf tools: Add a 'percore' event qualifier
  perf docs: Add description for stderr
  perf intel-pt: Fix sample timestamp wrt non-taken branches
  perf intel-pt: Fix improved sample timestamp
  perf intel-pt: Fix instructions sampling rate
  perf regs x86: Add X86 specific arch__intr_reg_mask()
  perf parse-regs: Add generic support for arch__intr/user_reg_mask()
  perf parse-regs: Split parse_regs
  perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events
  perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events
  perf vendor events arm64: Remove [[:xdigit:]] wildcard
  perf jevents: Remove unused variable
  perf test zstd: Fixup verbose mode output
  perf tests: Implement Zstd comp/decomp integration test
  perf inject: Enable COMPRESSED record decompression
  perf report: Implement perf.data record decompression
  perf record: Implement -z,--compression_level[=<n>] option
  perf report: Add stub processing of compressed events for -D
  ...

Pull clocksource updates from Ingo Molnar:
 "Misc clocksource/clockevent driver updates that came in a bit late but
  are ready for v5.2"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  misc: atmel_tclib: Do not probe already used TCBs
  clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
  clocksource/drivers/tcb_clksrc: Rename the file for consistency
  clocksource/drivers/timer-atmel-pit: Rework Kconfig option
  clocksource/drivers/tcb_clksrc: Move Kconfig option
  ARM: at91: Implement clocksource selection
  clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
  clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
  ARM: at91: move SoC specific definitions to SoC folder
  clocksource/drivers/timer-milbeaut: Cleanup common register accesses
  clocksource/drivers/timer-milbeaut: Add shutdown function
  clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
  clocksource/drivers/tegra: Rework for compensation of suspend time
  clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
  clocksource/drivers/sun4i: Add a compatible for suniv
  dt-bindings: timer: Add Allwinner suniv timer

Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...

Pull EFI fix from Ingo Molnar:
 "Fix an EFI-fb regression that affects certain x86 systems"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types

Pull core fixes from Ingo Molnar:
 "This fixes a particularly thorny munmap() bug with MPX, plus fixes a
  host build environment assumption in objtool"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Allow AR to be overridden with HOSTAR
  x86/mpx, mm/core: Fix recursive munmap() corruption

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late. Most of it
  are smaller fixes and additions, some defconfig updates due to recent
  development, etc.

  Code-wise the largest portion is a series of PM updates for the at91
  platform, and those have been in linux-next a while through the at91
  tree before we picked them up"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: dts: sprd: Add clock properties for serial devices
  Opt out of scripts/get_maintainer.pl
  ARM: ixp4xx: Remove duplicated include from common.c
  soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
  arm64: tegra: Disable XUSB support on Jetson TX2
  arm64: tegra: Enable SMMU translation for PCI on Tegra186
  arm64: tegra: Fix insecure SMMU users for Tegra186
  arm64: tegra: Select ARM_GIC_PM
  amba: tegra-ahb: Mark PM functions as __maybe_unused
  ARM: dts: logicpd-som-lv: Fix MMC1 card detect
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: socfpga_defconfig: enable LTC2497
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
  ARM: at91: sama5: make ov2640 as a module
  ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
  ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
  soc/fsl/qe: Fix an error code in qe_pin_request()
  ...

Pull powerpc fixes from Michael Ellerman:
 "One fix going back to stable, for a bug on 32-bit introduced when we
  added support for THREAD_INFO_IN_TASK.

  A fix for a typo in a recent rework of our hugetlb code that leads to
  crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE.

  Two fixes for our recent rework of the address layout on 64-bit hash
  CPUs, both only triggered when userspace tries to access addresses
  outside the user or kernel address ranges.

  Finally a fix for a recently introduced double free in an error path
  in our cacheinfo code.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C.
  Harding"

* tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/cacheinfo: Remove double free
  powerpc/mm/hash: Fix get_region_id() for invalid addresses
  powerpc/mm: Drop VM_BUG_ON in get_region_id()
  powerpc/mm: Fix crashes with hugepages & 4K pages
  powerpc/32s: fix flush_hash_pages() on SMP