An error occurred fetching the project authors.
- 18 Jul, 2007 6 commits
-
-
david m. richter authored
clarify that break_lease() checks for presence of any lock, not just leases. Signed-off-by: David M. Richter <richterd@citi.umich.edu> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
-
Maciej W. Rozycki authored
This is a reimplementation of the zs driver for the serial subsystem. Any resemblance to the old driver is purely coincidential. ;-) I do hope I got the handling of modem lines right -- better do not tackle me about the issue unless you feel too good... Any users of the old driver: please note the numbers of the serial lines have now been swapped, i.e. ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3. It has to do with the modem lines mentioned above; basically the port A in a given chip has to be initialised before the port B if you want to use the latter as the serial console (which is usually the case), as operations on modem lines of the serial line associated with the port B access both ports (see the comment at the top of the driver for the details of wiring used). Please update your scripts. This is also the reason each SCC now requests an IRQ once only (as seen in "/proc/interrupts") -- the handler takes care of both ports at once as the line associated with the port B has to take status update interrupts from both ports (and yet the line of the port A takes its own for itself too). The old driver never got it right... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yinghai Lu authored
early_serial_setup was removed from serial.h, but forgot to put in serial_8250.h Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
We can't show the extra logo from boot code if FB is built as a module. Make the FB_LOGO_EXTRA depend on FB=y. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Juhl authored
If, in dm_create_persistent(), the call to create_singlethread_workqueue() fails then we'll return without freeing the memory allocated to 'ps', thus leaking sizeof(struct pstore) bytes. This patch fixes the leak. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Mundt authored
With the slab zeroing allocations cleanups Christoph stubbed in a generic kzalloc(), which was missed on SLOB. Follow the SLAB/SLUB changes and kill off the __kzalloc() wrapper that SLOB was using. Reported-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 17 Jul, 2007 34 commits
-
-
Linus Torvalds authored
The old IDE driver is not ready to take generic SCSI commands, even if it uses them for some specific issues (ie the tray open/close ioctls for IDE CD-ROM's). Pointed out by Bartlomiej. I'm sure we'll have it fixed properly soon enough, but for now we should not allow it to cause problems. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
I really don't see anybody else wanting to select it ;) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Fix broken logic, SIGA flags must be bitwise ORed [S390] cio: Dont print trailing \0 in modalias_show(). [S390] Simplify stack trace. [S390] z/VM unit record device driver [S390] vmcp cleanup [S390] qdio: output queue stall on FCP and network devices [S390] Fix disassembly of RX_URRD, SI_URD & PC-relative instructions. [S390] Update default configuration.
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (21 commits) [WATCHDOG] at32ap700x_wdt.c - Fix compilation warnings [WATCHDOG] at32ap700x_wdt.c - Add spinlock support [WATCHDOG] at32ap700x_wdt.c - Add nowayout + MAGICCLOSE features [WATCHDOG] at32ap700x_wdt.c - timeout module parameter patch [WATCHDOG] at32ap700x_wdt.c - checkpatch.pl-0.05 clean-up's [WATCHDOG] change s3c2410_wdt to using dev_() macros for output [WATCHDOG] s3c2410_wdt announce initialisation [WATCHDOG] at32ap700x-wdt: add iounmap if probe function fails [WATCHDOG] at32ap700x-wdt: add missing iounmap in _remove [WATCHDOG] watchdog-driver-for-at32ap700x-devices-fix-2 [WATCHDOG] watchdog-driver-for-at32ap700x-devices-fix [WATCHDOG] Watchdog driver for AT32AP700X devices [WATCHDOG] Mixcom Watchdog - CodingStyle clean-up [WATCHDOG] Mixcom Watchdog - clean-up printk's [WATCHDOG] Mixcom Watchdog - clean-up printk's [WATCHDOG] Mixcom Watchdog - checkcard part 2 [WATCHDOG] Mixcom Watchdog - checkcard [WATCHDOG] Mixcom Watchdog - get rid of port offset's [WATCHDOG] Mixcom Watchdog - update "Documentation" [WATCHDOG] Remove the redundant check for pwrite() in EP93XXX watchdog. ...
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block: bsg: fix missing space in version print Don't define empty struct bsg_class_device if !CONFIG_BLK_DEV_BSG bsg: Kconfig updates bsg: minor cleanup bsg: device hash table cleanup bsg: fix initialization error handling bugs bsg: mark FUJITA Tomonori as bsg maintainer bsg: convert to dynamic major bsg: address various review comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix debug compilation error
-
Linus Torvalds authored
* 'isdn-cleanup' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] HiSax hfc_pci: minor cleanups [ISDN] HiSax bkm_a4t: split setup into two smaller functions [ISDN] HiSax enternow: split setup into 3 smaller functions [ISDN] HiSax netjet_u: split setup into 3 smaller functions [ISDN] HiSax netjet_s: code movement, prep for hotplug [ISDN] HiSax: move card state alloc/setup code into separate functions [ISDN] HiSax: move card setup into separate function
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Kill bogus set_fs(KERNEL_DS) in do_rt_sigreturn(). [SPARC64]: Update defconfig. [SPARC64]: Kill explicit %gl register reference.
-
Linus Torvalds authored
* 'uninit-var' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: arch/i386/* fs/* ipc/*: mark variables with uninitialized_var() drivers/*: mark variables with uninitialized_var()
-
Linus Torvalds authored
* 'warnings' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/atm/ambassador: kill uninit'd var warning, and fix bug [libata] sata_mv: use pci_try_set_mwi() drivers/infiniband/hw/mthca/mthca_qp: kill uninit'd var warning drivers/net/wan/sbni: kill uninit'd var warning drivers/mtd/ubi/eba: minor cleanup: tighten scope of a local var drivers/telephony/ixj: cleanup and fix gcc warning drivers/net/wan/pc300_drv: fix bug caught by gcc warning drivers/usb/misc/auerswald: fix status check, remove redundant check [netdrvr] eepro100, ne2k-pci: abort resume if pci_enable_device() fails [netdrvr] natsemi: Fix device removal bug kernel/auditfilter: kill bogus uninit'd-var compiler warning
-
Al Viro authored
... or we end up with header include order problems from hell. E.g. on m68k this is 100% fatal - local_irq_enable() there wants preempt_count(), which wants task_struct fields, which we won't have when we are in smp.h pulled from sched.h. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
From: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Garzik authored
* trim trailing whitespace * remove CONFIG_PCI ifdefs, this driver is always PCI (Kconfig enforced) * remove return statements at the tail of a function * remove indentation levels by returning an error code immediately. Makes the code much more readable, and easier to update to PCI hotplug API. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
No behavior changes, just code movement. Prep for PCI hotplug API. Well, CONFIG_PCI useless ifdef was removed. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
1) Remove CONFIG_PCI ifdefs. PCI is required in Kconfig. 2) Break up setup_netjet_s() into three separate internal functions. This helps facilitate upcoming use of PCI hotplug API, and in addition makes the code much easier to follow. No code is changed, just moved around. I even kept the out-of-favor "return(0)" style used in the current source code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Just code movement. No code changes or cleanups besides that which is required to call the new functions from the old code site. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
No behavior changes, just code movement. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Frank Lichtenheld authored
Fixes the following build error: CC sound/pci/mixart/mixart_hwdep.o sound/pci/mixart/mixart_hwdep.c: In function ‘mixart_hwdep_dsp_load’: sound/pci/mixart/mixart_hwdep.c:610: error: implicit declaration of function ‘vmalloc’ sound/pci/mixart/mixart_hwdep.c:617: error: implicit declaration of function ‘vfree’ Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Frank Lichtenheld authored
This fixes the following build-error: CC drivers/parisc/hppb.o drivers/parisc/hppb.c: In function ‘hppb_probe’: drivers/parisc/hppb.c:73: error: implicit declaration of function ‘ccio_request_resource’ Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
Mark variables with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Mark variables in drivers/* with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
An uninitialized variable warning illuminated an area where indeed the variable was being used without initialization. Unfortunately, after verifying all such paths were fixed, the warning still appears. So we follow the initialization practice of other variables in this function. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Because sometimes in life, it's ok to fail. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
drivers/infiniband/hw/mthca/mthca_qp.c: In function ‘mthca_tavor_post_send’: drivers/infiniband/hw/mthca/mthca_qp.c:1594: warning: ‘f0’ may be used uninitialized in this function drivers/infiniband/hw/mthca/mthca_qp.c: In function ‘mthca_arbel_post_send’: drivers/infiniband/hw/mthca/mthca_qp.c:1949: warning: ‘f0’ may be used uninitialized in this function Initializing 'f0' is not strictly necessary in either case, AFAICS. I was considering use of uninitialized_var(), but looking at the complex flow of control in each function, I feel it is wiser and safer to simply zero the var and be certain of ourselves. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
It's actually convenient in the code to initialize this and a sister variable to zero. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
1) Fix gcc uninit'd var warnings by adding 'default' switch stmt labels in two cases. It was lightning-strikes unlikely that a problem would ever arise, but not impossible. 2) Tighten the scope of 'blankword' in two cases. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
The warning drivers/net/wan/pc300_drv.c: In function ‘cpc_open’: drivers/net/wan/pc300_drv.c:2942: warning: ‘br’ may be used uninitialized in this function was valid. Ensure 'br' is initialized in all cases. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
1) We should only set 'actual_length' output variable if usb length is known to be good. 2) No need to check actual_length for NULL. The only caller always passes non-NULL value. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
This episode illustrates how an overused warning can train people to ignore that warning, which winds up hiding bugs. The warning drivers/net/natsemi.c: In function ‘natsemi_remove1’: drivers/net/natsemi.c:3222: warning: ignoring return value of ‘device_create_file’, declared with attribute warn_unused_result is oft-ignored, even though at close inspection one notices this occurs in the /remove/ function, not normally where creation occurs. A quick s/create/remove/ and we are fixed, with the warning gone. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Kill this warning... kernel/auditfilter.c: In function ‘audit_receive_filter’: kernel/auditfilter.c:1213: warning: ‘ndw’ may be used uninitialized in this function kernel/auditfilter.c:1213: warning: ‘ndp’ may be used uninitialized in this function ...with a simplification of the code. audit_put_nd() can accept NULL arguments, just like kfree(). It is cleaner to init two existing vars to NULL, remove the redundant test variable 'putnd_needed' branches, and call audit_put_nd() directly. As a desired side effect, the warning goes away. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-