- 17 Apr, 2019 20 commits
-
-
Xin Long authored
[ Upstream commit 09279e61 ] Syzbot report a kernel-infoleak: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 Call Trace: _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline] sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562 ... Uninit was stored to memory at: sctp_transport_init net/sctp/transport.c:61 [inline] sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115 sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637 sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline] sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361 ... Bytes 8-15 of 16 are uninitialized It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in struct sockaddr_in) wasn't initialized, but directly copied to user memory in sctp_getsockopt_peer_addrs(). So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as sctp_v6_addr_to_user() does. Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Tested-by:
Alexander Potapenko <glider@google.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heiner Kallweit authored
[ Upstream commit b75bb8a5 ] There's a significant number of reports that re-enabling ASPM causes different issues, ranging from decreased performance to system not booting at all. This affects only a minority of users, but the number of affected users is big enough that we better switch off ASPM again. This will hurt notebook users who are not affected by the issues, they may see decreased battery runtime w/o ASPM. With the PCI core folks is being discussed to add generic sysfs attributes to control ASPM. Once this is in place brave enough users can re-enable ASPM on their system. Fixes: a99790bf ("r8169: Reinstate ASPM Support") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 6289d0fa ] This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Andrea Righi authored
[ Upstream commit f28cd2af ] The flow action buffer can be resized if it's not big enough to contain all the requested flow actions. However, this resize doesn't take into account the new requested size, the buffer is only increased by a factor of 2x. This might be not enough to contain the new data, causing a buffer overflow, for example: [ 42.044472] ============================================================================= [ 42.045608] BUG kmalloc-96 (Not tainted): Redzone overwritten [ 42.046415] ----------------------------------------------------------------------------- [ 42.047715] Disabling lock debugging due to kernel taint [ 42.047716] INFO: 0x8bf2c4a5-0x720c0928. First byte 0x0 instead of 0xcc [ 42.048677] INFO: Slab 0xbc6d2040 objects=29 used=18 fp=0xdc07dec4 flags=0x2808101 [ 42.049743] INFO: Object 0xd53a3464 @offset=2528 fp=0xccdcdebb [ 42.050747] Redzone 76f1b237: cc cc cc cc cc cc cc cc ........ [ 42.051839] Object d53a3464: 6b 6b 6b 6b 6b 6b 6b 6b 0c 00 00 00 6c 00 00 00 kkkkkkkk....l... [ 42.053015] Object f49a30cc: 6c 00 0c 00 00 00 00 00 00 00 00 03 78 a3 15 f6 l...........x... [ 42.054203] Object acfe4220: 20 00 02 00 ff ff ff ff 00 00 00 00 00 00 00 00 ............... [ 42.055370] Object 21024e91: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 42.056541] Object 070e04c3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 42.057797] Object 948a777a: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 42.059061] Redzone 8bf2c4a5: 00 00 00 00 .... [ 42.060189] Padding a681b46e: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Fix by making sure the new buffer is properly resized to contain all the requested data. BugLink: https://bugs.launchpad.net/bugs/1813244Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 0db6f8be ] It returned always NULL, thus it was never possible to get the filter. Example: $ ip link add foo type dummy $ ip link add bar type dummy $ tc qdisc add dev foo clsact $ tc filter add dev foo protocol all pref 1 ingress handle 1234 \ matchall action mirred ingress mirror dev bar Before the patch: $ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall Error: Specified filter handle not found. We have an error talking to the kernel After: $ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall filter ingress protocol all pref 1 matchall chain 0 handle 0x4d2 not_in_hw action order 1: mirred (Ingress Mirror to device bar) pipe index 1 ref 1 bind 1 CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> Fixes: fd62d9f5 ("net/sched: matchall: Fix configuration race") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit fae27081 ] the control path of 'sample' action does not validate the value of 'rate' provided by the user, but then it uses it as divisor in the traffic path. Validate it in tcf_sample_init(), and return -EINVAL with a proper extack message in case that value is zero, to fix a splat with the script below: # tc f a dev test0 egress matchall action sample rate 0 group 1 index 2 # tc -s a s action sample total acts 1 action order 0: sample rate 1/0 group 1 pipe index 2 ref 1 bind 1 installed 19 sec used 19 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 # ping 192.0.2.1 -I test0 -c1 -q divide error: 0000 [#1] SMP PTI CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample] Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01 RSP: 0018:ffffae320190ba30 EFLAGS: 00010246 RAX: 00000000b0677d21 RBX: ffff8af1ed9ec000 RCX: 0000000059a9fe49 RDX: 0000000000000000 RSI: 000000000c7e33b7 RDI: ffff8af23daa0af0 RBP: ffff8af1ee11b200 R08: 0000000074fcaf7e R09: 0000000000000000 R10: 0000000000000050 R11: ffffffffb3088680 R12: ffff8af232307f80 R13: 0000000000000003 R14: ffff8af1ed9ec000 R15: 0000000000000000 FS: 00007fe9c6d2f740(0000) GS:ffff8af23da80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff6772f000 CR3: 00000000746a2004 CR4: 00000000001606e0 Call Trace: tcf_action_exec+0x7c/0x1c0 tcf_classify+0x57/0x160 __dev_queue_xmit+0x3dc/0xd10 ip_finish_output2+0x257/0x6d0 ip_output+0x75/0x280 ip_send_skb+0x15/0x40 raw_sendmsg+0xae3/0x1410 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] Kernel panic - not syncing: Fatal exception in interrupt Add a TDC selftest to document that 'rate' is now being validated. Reported-by:
Matteo Croce <mcroce@redhat.com> Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Yotam Gigi <yotam.gi@gmail.com> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit cb66ddd1 ] When it is to cleanup net namespace, rds_tcp_exit_net() will call rds_tcp_kill_sock(), if t_sock is NULL, it will not call rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect() and reference 'net' which has already been freed. In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before sock->ops->connect, but if connect() is failed, it will call rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always failed, rds_connect_worker() will try to reconnect all the time, so rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the connections. Therefore, the condition !tc->t_sock is not needed if it is going to do cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always NULL, and there is on other path to cancel cp_conn_w and free connection. So this patch is to fix this. rds_tcp_kill_sock(): ... if (net != c_net || !tc->t_sock) ... Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> ================================================================== BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721 CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11 Hardware name: linux,dummy-virt (DT) Workqueue: krdsd rds_connect_worker Call trace: dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x120/0x188 lib/dump_stack.c:113 print_address_description+0x68/0x278 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x21c/0x348 mm/kasan/report.c:409 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 __sock_create+0x4f8/0x770 net/socket.c:1276 sock_create_kern+0x50/0x68 net/socket.c:1322 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 Allocated by task 687: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2705 [inline] slab_alloc mm/slub.c:2713 [inline] kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718 kmem_cache_zalloc include/linux/slab.h:697 [inline] net_alloc net/core/net_namespace.c:384 [inline] copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206 ksys_unshare+0x340/0x628 kernel/fork.c:2577 __do_sys_unshare kernel/fork.c:2645 [inline] __se_sys_unshare kernel/fork.c:2643 [inline] __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960 Freed by task 264: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968 net_free net/core/net_namespace.c:400 [inline] net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407 net_drop_ns net/core/net_namespace.c:406 [inline] cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 The buggy address belongs to the object at ffff8003496a3f80 which belongs to the cache net_namespace of size 7872 The buggy address is located 1796 bytes inside of 7872-byte region [ffff8003496a3f80, ffff8003496a5e40) The buggy address belongs to the page: page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000 index:0x0 compound_mapcount: 0 flags: 0xffffe0000008100(slab|head) raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000 raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 467fa153("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 355b9855 ] net_hash_mix() currently uses kernel address of a struct net, and is used in many places that could be used to reveal this address to a patient attacker, thus defeating KASLR, for the typical case (initial net namespace, &init_net is not dynamically allocated) I believe the original implementation tried to avoid spending too many cycles in this function, but security comes first. Also provide entropy regardless of CONFIG_NET_NS. Fixes: 0b441916 ("netns: introduce the net_hash_mix "salt" for hashes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Artemy Kovalyov authored
[ Upstream commit e8b26b21 ] Delete initialization of high order entries in mr cache to decrease initial memory footprint. When required, the administrator can populate the entries with memory keys via the /sys interface. This approach is very helpful to significantly reduce the per HW function memory footprint in virtualization environments such as SRIOV. Fixes: 9603b61d ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reported-by:
Shalom Toledo <shalomt@mellanox.com> Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 0ab03f35 ] Currently we may merge incorrectly a received GSO packet or a packet with frag_list into a packet sitting in the gro_hash list. skb_segment() may crash case because the assumptions on the skb layout are not met. The correct behaviour would be to flush the packet in the gro_hash list and send the received GSO packet directly afterwards. Commit d61d072e ("net-gro: avoid reorders") sets NAPI_GRO_CB(skb)->flush in this case, but this is not checked before merging. This patch makes sure to check this flag and to not merge in that case. Fixes: d61d072e ("net-gro: avoid reorders") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Li RongQing authored
[ Upstream commit 3d883026 ] NULL or ZERO_SIZE_PTR will be returned for zero sized memory request, and derefencing them will lead to a segfault so it is unnecessory to call vzalloc for zero sized memory request and not call functions which maybe derefence the NULL allocated memory this also fixes a possible memory leak if phy_ethtool_get_stats returns error, memory should be freed before exit Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Wang Li <wangli39@baidu.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit 3c446e6f ] When kcm is loaded while many processes try to create a KCM socket, a crash occurs: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e IP: mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 PGD 8000000016ef2067 P4D 8000000016ef2067 PUD 3d6e9067 PMD 0 Oops: 0002 [#1] SMP KASAN PTI CPU: 0 PID: 7005 Comm: syz-executor.5 Not tainted 4.12.14-396-default #1 SLE15-SP1 (unreleased) RIP: 0010:mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 RSP: 0018:ffff88000d487a00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000000e RCX: 1ffff100082b0719 ... CR2: 000000000000000e CR3: 000000004b1bc003 CR4: 0000000000060ef0 Call Trace: kcm_create+0x600/0xbf0 [kcm] __sock_create+0x324/0x750 net/socket.c:1272 ... This is due to race between sock_create and unfinished register_pernet_device. kcm_create tries to do "net_generic(net, kcm_net_id)". but kcm_net_id is not initialized yet. So switch the order of the two to close the race. This can be reproduced with mutiple processes doing socket(PF_KCM, ...) and one process doing module removal. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reviewed-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit bb9bd814 ] ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Tested-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Junwei Hu authored
[ Upstream commit ef0efcd3 ] At the beginning of ip6_fragment func, the prevhdr pointer is obtained in the ip6_find_1stfragopt func. However, all the pointers pointing into skb header may change when calling skb_checksum_help func with skb->ip_summed = CHECKSUM_PARTIAL condition. The prevhdr pointe will be dangling if it is not reloaded after calling __skb_linearize func in skb_checksum_help func. Here, I add a variable, nexthdr_offset, to evaluate the offset, which does not changes even after calling __skb_linearize func. Fixes: 405c92f7 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment") Signed-off-by:
Junwei Hu <hujunwei4@huawei.com> Reported-by:
Wenhao Zhang <zhangwenhao8@huawei.com> Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Sheena Mira-ato authored
[ Upstream commit b2e54b09 ] The device type for ip6 tunnels is set to ARPHRD_TUNNEL6. However, the ip4ip6_err function is expecting the device type of the tunnel to be ARPHRD_TUNNEL. Since the device types do not match, the function exits and the ICMP error packet is not sent to the originating host. Note that the device type for IPv4 tunnels is set to ARPHRD_TUNNEL. Fix is to expect a tunnel device type of ARPHRD_TUNNEL6 instead. Now the tunnel device type matches and the ICMP error packet is sent to the originating host. Signed-off-by:
Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit bbd669a8 ] Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Haiyang Zhang authored
[ Upstream commit 1b704c4a ] After queue stopped, the wakeup mechanism may wake it up again when ring buffer usage is lower than a threshold. This may cause send path panic on NULL pointer when we stopped all tx queues in netvsc_detach and start removing the netvsc device. This patch fix it by adding a tx_disable flag to prevent unwanted queue wakeup. Fixes: 7b2ee50c ("hv_netvsc: common detach logic") Reported-by:
Mohammed Gamal <mgamal@redhat.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Breno Leitao authored
commit 897bc3df upstream. Commit e1c3743e ("powerpc/tm: Set MSR[TS] just prior to recheckpoint") moved a code block around and this block uses a 'msr' variable outside of the CONFIG_PPC_TRANSACTIONAL_MEM, however the 'msr' variable is declared inside a CONFIG_PPC_TRANSACTIONAL_MEM block, causing a possible error when CONFIG_PPC_TRANSACTION_MEM is not defined. error: 'msr' undeclared (first use in this function) This is not causing a compilation error in the mainline kernel, because 'msr' is being used as an argument of MSR_TM_ACTIVE(), which is defined as the following when CONFIG_PPC_TRANSACTIONAL_MEM is *not* set: #define MSR_TM_ACTIVE(x) 0 This patch just fixes this issue avoiding the 'msr' variable usage outside the CONFIG_PPC_TRANSACTIONAL_MEM block, avoiding trusting in the MSR_TM_ACTIVE() definition. Cc: stable@vger.kernel.org Reported-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Fixes: e1c3743e ("powerpc/tm: Set MSR[TS] just prior to recheckpoint") Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Yan Zhao authored
[ Upstream commit 663a50ce ] shadow mm's pin count got increased in workload preparation phase, which is after workload scanning. it will get decreased in complete_current_workload() anyway after workload completion. Sometimes, if a workload meets a scanning error, its shadow mm pin count will not get increased but will get decreased in the end. This patch lets shadow mm's pin count not go below 0. Fixes: 2707e444 ("drm/i915/gvt: vGPU graphics memory virtualization") Cc: zhenyuw@linux.intel.com Cc: stable@vger.kernel.org #4.14+ Signed-off-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Jim Mattson authored
[ Upstream commit 9ebdfe52 ] According to the SDM, "NMI-window exiting" VM-exits wake a logical processor from the same inactive states as would an NMI and "interrupt-window exiting" VM-exits wake a logical processor from the same inactive states as would an external interrupt. Specifically, they wake a logical processor from the shutdown state and from the states entered using the HLT and MWAIT instructions. Fixes: 6dfacadd ("KVM: nVMX: Add support for activity state HLT") Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Suggested-by:
Sean Christopherson <sean.j.christopherson@intel.com> [Squashed comments of two Jim's patches and used the simplified code hunk provided by Sean. - Radim] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
- 05 Apr, 2019 20 commits
-
-
Greg Kroah-Hartman authored
-
Andrea Righi authored
[ Upstream commit a50480cb ] These interrupt functions are already non-attachable by kprobes. Blacklist them explicitly so that they can show up in /sys/kernel/debug/kprobes/blacklist and tools like BCC can use this additional information. Signed-off-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20181206095648.GA8249@DellSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Coly Li authored
[ Upstream commit 5b5fd3c9 ] Current code already uses d_strtoul_nonzero() to convert input string to an unsigned integer, to make sure writeback_rate_p_term_inverse won't be zero value. But overflow may happen when converting input string to an unsigned integer value by d_strtoul_nonzero(), then dc->writeback_rate_p_term_inverse can still be set to 0 even if the sysfs file input value is not zero, e.g. 4294967296 (a.k.a UINT_MAX+1). If dc->writeback_rate_p_term_inverse is set to 0, it might cause a dev-zero error in following code from __update_writeback_rate(), int64_t proportional_scaled = div_s64(error, dc->writeback_rate_p_term_inverse); This patch replaces d_strtoul_nonzero() by sysfs_strtoul_clamp() and limit the value range in [1, UINT_MAX]. Then the unsigned integer overflow and dev-zero error can be avoided. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit d693c008 ] Commit 53fa1f6e ("ACPI / video: Only default only_lcd to true on Win8-ready _desktops_") introduced chassis type detection, limiting the lcd_only check for the backlight to devices where the chassis-type indicates their is no builtin LCD panel. The purpose of the lcd_only check is to avoid advertising a backlight interface on desktops, since skylake and newer machines seem to always have a backlight interface even if there is no LCD panel. The limiting of this check to desktops only was done to avoid breaking backlight support on some laptops which do not have the lcd flag set. The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check we end up falsely advertising backlight/brightness control on this device. This commit extend the dmi_is_desktop check to return true for type 0x10 to fix this. Fixes: 53fa1f6e ("ACPI / video: Only default only_lcd to true ...") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 1f5d861f ] When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable 'ns' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_systime wraps), as it may fail to initialize these values if the if condition was ever false (meaning the callback doesn't exist). It's not wrong because the callback is what initializes ns. While it's unlikely that the callback is going to disappear at some point and make that condition false, we can easily avoid this warning by zero initializing the variable. Link: https://github.com/ClangBuiltLinux/linux/issues/384 Fixes: df103170 ("net: stmmac: Avoid sometimes uninitialized Clang warnings") Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Ville Syrjälä authored
[ Upstream commit c978ae9b ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit e9eb788f ] The Microsoft documenation for the PNP0C40 device aka the "Windows-compatible button array" describes the 5th GpioInt listed in the resources as: '5. Interrupt corresponding to the "Rotation Lock" button, if supported'. Notice this describes the 5th entry as a button while we sofar have been mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232 which actually comes with a rotation-lock button, the button indeed is a button and not a slider/switch. An image search for other Windows tablets has found 2 more models with a rotation-lock button and on both of those it too is a push-button and not a slider/switch. Further evidence can be found in the HUT extension HUTRR52 from Microsoft which adds rotation lock support to the HUT, which describes 2 different usages: "0xC9 System Display Rotation Lock Button" and "0xCA System Display Rotation Lock Slider Switch" note that switch is seen as a separate thing here and the non switch wording is an exact match for the "Windows-compatible button array" spec wording. TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong because the 5th GPIO is for a push-button not a switch. This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ben Dooks authored
[ Upstream commit e486df39 ] The dma_desc->bytes_transferred counter tracks the number of bytes moved by the DMA channel. This is then used to calculate the information passed back in the in the tegra_dma_tx_status callback, which is usually fine. When the DMA channel is configured as continous, then the bytes_transferred counter will increase over time and eventually overflow to become negative so the residue count will become invalid and the ALSA sound-dma code will report invalid hardware pointer values to the application. This results in some users becoming confused about the playout position and putting audio data in the wrong place. To fix this issue, always ensure the bytes_transferred field is modulo the size of the request. We only do this for the case of the cyclic transfer done ISR as anyone attempting to move 2GiB of DMA data in one transfer is unlikely. Note, we don't fix the issue that we should /never/ transfer a negative number of bytes so we could make those fields unsigned. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Katsuhiro Suzuki authored
[ Upstream commit a0e447b0 ] This patch fixes settings of GPLL frequency in fractional mode for rk3328. In this mode, FOUTVCO is calcurated by following formula: FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24) The problem is in FREF * FRAC >> 24 term. This result always lacks one from target value is specified by rate member. For example first itme of rk3328_pll_frac_rate originally has - rate : 1016064000 - refdiv: 3 - fbdiv : 127 - frac : 134217 - FREF * FBDIV / REFDIV = 1016000000 - (FREF * FRAC / REFDIV) >> 24 = 63999 Thus calculated rate is 1016063999. It seems wrong. If frac has 134218 (it is increased 1 from original value), second term is 64000. All other items have same situation. So this patch adds 1 to frac member in all items of rk3328_pll_frac_rate. Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Acked-by:
Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 8d9981ef ] Order, ids and size between the table of regmap clocks and the onecell data table could be different. Set regmap pointer in all the regmap clocks before starting the registration using the onecell data, to make sure we don't get into an incoherent situation. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Peter Wu authored
[ Upstream commit 00eb5b0d ] After drm_fb_helper_fbdev_setup calls drm_fb_helper_init, "dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will have some effect). After that, drm_fb_helper_initial_config is called which may call the "fb_probe" driver callback. This driver callback may call drm_fb_helper_defio_init (as is done by drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs) as documented. These are normally cleaned up on exit by drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini. If an error occurs after "fb_probe", but before setup is complete, then calling just drm_fb_helper_fini will leak resources. This was triggered by df2052cc ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"): [ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38) [ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2 [ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0 [ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1 [ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0 ... [ 50.023155] Call Trace: [ 50.023155] ? bochs_kms_fini+0x1e/0x30 [ 50.023155] ? bochs_unload+0x18/0x40 This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n. Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian Link: https://lkml.kernel.org/r/20181223004315.GA11455@al Fixes: 87412163 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()") Reported-by:
kernel test robot <rong.a.chen@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Rafael Ávila de Espíndola authored
[ Upstream commit d071ae09 ] Accessing per-CPU variables is done by finding the offset of the variable in the per-CPU block and adding it to the address of the respective CPU's block. Section 3.10.8 of ld.bfd's documentation states: For expressions involving numbers, relative addresses and absolute addresses, ld follows these rules to evaluate terms: Other binary operations, that is, between two relative addresses not in the same section, or between a relative address and an absolute address, first convert any non-absolute term to an absolute address before applying the operator." Note that LLVM's linker does not adhere to the GNU ld's implementation and as such requires implicitly-absolute terms to be explicitly marked as absolute in the linker script. If not, it fails currently with: ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute Makefile:1040: recipe for target 'vmlinux' failed This is not a functional change for ld.bfd which converts the term to an absolute symbol anyways as specified above. Based on a previous submission by Tri Vo <trong@android.com>. Reported-by:
Dmitry Golovin <dima@golovin.in> Signed-off-by:
Rafael Ávila de Espíndola <rafael@espindo.la> [ Update commit message per Boris' and Michael's suggestions. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Tested-by:
-
Zumeng Chen authored
[ Upstream commit ba2ffc96 ] Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 4ad0be16 ] The linux-firmware brcmfmac firmware files contain an embedded table with per country allowed channels and strength info. For recent hardware these versions of the firmware are specially build for linux-firmware, the firmware files directly available from Cypress rely on a separate clm_blob file for this info. For some unknown reason Cypress refuses to provide the standard firmware files + clm_blob files it uses elsewhere for inclusion into linux-firmware, instead relying on these special builds with the clm_blob info embedded. This means that the linux-firmware firmware versions often lag behind, but I digress. The brcmfmac driver does support the separate clm_blob file and always tries to load this. Currently we use request_firmware for this. This means that on any standard install, using the standard combo of linux-kernel + linux-firmware, we will get a warning: "Direct firmware load for ... failed with error -2" On top of this, brcmfmac itself prints: "no clm_blob available (err=-2), device may have limited channels available". This commit switches to firmware_request_nowarn, fixing almost any brcmfmac device logging the warning (it leaves the brcmfmac info message in place). Signed-off-by:
-
Ondrej Mosnacek authored
[ Upstream commit 53e0c2aa ] Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT flag unset. This is achived by returning -EOPNOTSUPP for this case in selinux_inode_setsecurtity() (because that function should not be called in such case anyway) and translating this error to 0 in selinux_inode_notifysecctx(). This fixes behavior of kernfs-based filesystems when mounted with the 'context=' option. Before this patch, if a node's context had been explicitly set to a non-default value and later the filesystem has been remounted with the 'context=' option, then this node would show up as having the manually-set context and not the mount-specified one. Steps to reproduce: # mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified # chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.procs -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.threads # umount /sys/fs/cgroup/unified # mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified Result before: # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads Result after: # ls -lZ /sys/fs/cgroup/unified total 0 -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
George Rimar authored
[ Upstream commit 927185c1 ] The kernel uses the OUTPUT_FORMAT linker script command in it's linker scripts. Most of the time, the -m option is passed to the linker with correct architecture, but sometimes (at least for x86_64) the -m option contradicts the OUTPUT_FORMAT directive. Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object files, but are linked with the -m elf_x86_64 linker flag when building for x86_64. The GNU linker manpage doesn't explicitly state any tie-breakers between -m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT overrides the emulation value specified with the -m option. LLVM lld has a different behavior, however. When supplied with contradicting -m and OUTPUT_FORMAT values it fails with the following error message: ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64 Therefore, just add the correct -m after the incorrect one (it overrides it), so the linker invocation looks like this: ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \ realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf This is not a functional change for GNU ld, because (although not explicitly documented) OUTPUT_FORMAT overrides -m EMULATION. Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting it in QEMU. [ bp: massage and clarify text. ] Suggested-by:
George Rimar <grimar@accesssoftek.com> Signed-off-by:
Tri Vo <trong@android.com> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 934c5b32 ] The correct way for legacy drivers to update properties that need to do a full modeset, is to do a full modeset. Note that we don't need to call the drm_mode_config_internal helper because we're not changing any of the refcounted paramters. v2: Fixup error handling (Ville). Since the old code didn't bother I decided to just delete it instead of adding even more code for just error handling. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.chSigned-off-by:
-
Paul Kocialkowski authored
[ Upstream commit 890880dd ] When drivers pass non-empty lists of modifiers for initializing their planes, we can infer that they allow framebuffer modifiers and set the driver's allow_fb_modifiers mode config element. In case the allow_fb_modifiers element was not set (some drivers tend to set them after registering planes), the modifiers will still be registered but won't be available to userspace unless the flag is set later. However in that case, the IN_FORMATS blob won't be created. In order to avoid this case and generally reduce the trouble associated with the flag, always set allow_fb_modifiers when a non-empty list of format modifiers is passed at plane init. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.comSigned-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 6daae002 ] Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines. Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to rely on the bootloader to set them up correctly. The vendor u-boot sources for Odroid-C1 use the following Ethernet pinmux configuration: SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f); SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000); This translates to the following pin groups in the mainline kernel: - register 6 bit 0: eth_rxd1 (DIF_0_P) - register 6 bit 1: eth_rxd0 (DIF_0_N) - register 6 bit 2: eth_rx_dv (DIF_1_P) - register 6 bit 3: eth_rx_clk (DIF_1_N) - register 6 bit 6: eth_tx_en (DIF_3_P) - register 6 bit 8: eth_ref_clk (DIF_3_N) - register 6 bit 9: eth_mdc (DIF_4_P) - register 6 bit 10: eth_mdio_en (DIF_4_N) - register 6 bit 11: eth_tx_clk (GPIOH_9) - register 6 bit 12: eth_txd2 (GPIOH_8) - register 6 bit 13: eth_txd3 (GPIOH_7) - register 7 bit 20: eth_txd0_0 (GPIOH_6) - register 7 bit 21: eth_txd1_0 (GPIOH_5) - register 7 bit 22: eth_rxd3 (DIF_2_P) - register 7 bit 23: eth_rxd2 (DIF_2_N) All functions except eth_rxd2 and eth_rxd3 are already supported by the pinctrl-meson8b driver. Suggested-by:
Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
Emiliano Ingrassia <ingrassia@epigenesys.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Axel Lin authored
[ Upstream commit f01a7beb ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e ("regulator: act8865: Add act8600 support") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
