1. 05 Oct, 2014 4 commits
    • Stephen Warren's avatar
      drm/tegra: add MODULE_DEVICE_TABLEs · 873d1515
      Stephen Warren authored
      commit ef70728c upstream.
      
      When tegra-drm.ko is built as a module, these MODULE_DEVICE_TABLEs allow
      the module to be auto-loaded since the module will match the devices
      instantiated from device tree.
      
      (Notes for stable: in 3.14+, just git rm any conflicting file, since they
      are added in later kernels. For 3.13 and below, manual merging will be
      needed)
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      873d1515
    • Ronald Wahl's avatar
      carl9170: fix sending URBs with wrong type when using full-speed · 2593ca04
      Ronald Wahl authored
      commit 671796dd upstream.
      
      The driver assumes that endpoint 4 is always an interrupt endpoint.
      Unfortunately the type differs between high-speed and full-speed
      configurations while in the former case it is indeed an interrupt
      endpoint this is not true for the latter case - here it is a bulk
      endpoint. When sending URBs with the wrong type the kernel will
      generate a warning message including backtrace. In this specific
      case there will be a huge amount of warnings which can bring the system
      to freeze.
      
      To fix this we are now sending URBs to endpoint 4 using the type
      found in the endpoint descriptor.
      
      A side note: The carl9170 firmware currently specifies endpoint 4 as
      interrupt endpoint even in the full-speed configuration but this has
      no relevance because before this firmware is loaded the endpoint type
      is as described above and after the firmware is running the stick is not
      reenumerated and so the old descriptor is used.
      Signed-off-by: default avatarRonald Wahl <ronald.wahl@raritan.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2593ca04
    • Stephen Boyd's avatar
      cpufreq: OPP: Avoid sleeping while atomic · 84d172d6
      Stephen Boyd authored
      commit 3c5445ce upstream.
      
      We allocate the cpufreq table after calling rcu_read_lock(),
      which disables preemption. This causes scheduling while atomic
      warnings. Use GFP_ATOMIC instead of GFP_KERNEL and update for
      kcalloc while we're here.
      
      BUG: sleeping function called from invalid context at mm/slub.c:1246
      in_atomic(): 0, irqs_disabled(): 0, pid: 80, name: modprobe
      5 locks held by modprobe/80:
       #0:  (&dev->mutex){......}, at: [<c050d484>] __driver_attach+0x48/0x98
       #1:  (&dev->mutex){......}, at: [<c050d494>] __driver_attach+0x58/0x98
       #2:  (subsys mutex#5){+.+.+.}, at: [<c050c114>] subsys_interface_register+0x38/0xc8
       #3:  (cpufreq_rwsem){.+.+.+}, at: [<c05a9c8c>] __cpufreq_add_dev.isra.22+0x84/0x92c
       #4:  (rcu_read_lock){......}, at: [<c05ab24c>] dev_pm_opp_init_cpufreq_table+0x18/0x10c
      Preemption disabled at:[<  (null)>]   (null)
      
      CPU: 2 PID: 80 Comm: modprobe Not tainted 3.16.0-rc3-next-20140701-00035-g286857f216aa-dirty #217
      [<c0214da8>] (unwind_backtrace) from [<c02123f8>] (show_stack+0x10/0x14)
      [<c02123f8>] (show_stack) from [<c070141c>] (dump_stack+0x70/0xbc)
      [<c070141c>] (dump_stack) from [<c02f4cb0>] (__kmalloc+0x124/0x250)
      [<c02f4cb0>] (__kmalloc) from [<c05ab270>] (dev_pm_opp_init_cpufreq_table+0x3c/0x10c)
      [<c05ab270>] (dev_pm_opp_init_cpufreq_table) from [<bf000508>] (cpufreq_init+0x48/0x378 [cpufreq_generic])
      [<bf000508>] (cpufreq_init [cpufreq_generic]) from [<c05a9e08>] (__cpufreq_add_dev.isra.22+0x200/0x92c)
      [<c05a9e08>] (__cpufreq_add_dev.isra.22) from [<c050c160>] (subsys_interface_register+0x84/0xc8)
      [<c050c160>] (subsys_interface_register) from [<c05a9494>] (cpufreq_register_driver+0x108/0x2d8)
      [<c05a9494>] (cpufreq_register_driver) from [<bf000888>] (generic_cpufreq_probe+0x50/0x74 [cpufreq_generic])
      [<bf000888>] (generic_cpufreq_probe [cpufreq_generic]) from [<c050e994>] (platform_drv_probe+0x18/0x48)
      [<c050e994>] (platform_drv_probe) from [<c050d1f4>] (driver_probe_device+0x128/0x370)
      [<c050d1f4>] (driver_probe_device) from [<c050d4d0>] (__driver_attach+0x94/0x98)
      [<c050d4d0>] (__driver_attach) from [<c050b778>] (bus_for_each_dev+0x54/0x88)
      [<c050b778>] (bus_for_each_dev) from [<c050c894>] (bus_add_driver+0xe8/0x204)
      [<c050c894>] (bus_add_driver) from [<c050dd48>] (driver_register+0x78/0xf4)
      [<c050dd48>] (driver_register) from [<c0208870>] (do_one_initcall+0xac/0x1d8)
      [<c0208870>] (do_one_initcall) from [<c028b6b4>] (load_module+0x190c/0x21e8)
      [<c028b6b4>] (load_module) from [<c028c034>] (SyS_init_module+0xa4/0x110)
      [<c028c034>] (SyS_init_module) from [<c020f0c0>] (ret_fast_syscall+0x0/0x48)
      
      Fixes: a0dd7b79 (PM / OPP: Move cpufreq specific OPP functions out of generic OPP library)
      Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      Acked-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
      Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      84d172d6
    • Andy Lutomirski's avatar
      module: Clean up ro/nx after early module load failures · 61618f30
      Andy Lutomirski authored
      commit ff7e0055 upstream.
      
      The commit
      
          4982223e module: set nx before marking module MODULE_STATE_COMING.
      
      introduced a regression: if a module fails to parse its arguments or
      if mod_sysfs_setup fails, then the module's memory will be freed
      while still read-only.  Anything that reuses that memory will crash
      as soon as it tries to write to it.
      
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndy Lutomirski <luto@amacapital.net>
      Signed-off-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      61618f30
  2. 17 Sep, 2014 36 commits
    • Greg Kroah-Hartman's avatar
      Linux 3.16.3 · c13c2820
      Greg Kroah-Hartman authored
      c13c2820
    • David Howells's avatar
      KEYS: Fix termination condition in assoc array garbage collection · a4b9e45f
      David Howells authored
      commit 95389b08 upstream.
      
      This fixes CVE-2014-3631.
      
      It is possible for an associative array to end up with a shortcut node at the
      root of the tree if there are more than fan-out leaves in the tree, but they
      all crowd into the same slot in the lowest level (ie. they all have the same
      first nibble of their index keys).
      
      When assoc_array_gc() returns back up the tree after scanning some leaves, it
      can fall off of the root and crash because it assumes that the back pointer
      from a shortcut (after label ascend_old_tree) must point to a normal node -
      which isn't true of a shortcut node at the root.
      
      Should we find we're ascending rootwards over a shortcut, we should check to
      see if the backpointer is zero - and if it is, we have completed the scan.
      
      This particular bug cannot occur if the root node is not a shortcut - ie. if
      you have fewer than 17 keys in a keyring or if you have at least two keys that
      sit into separate slots (eg. a keyring and a non keyring).
      
      This can be reproduced by:
      
      	ring=`keyctl newring bar @s`
      	for ((i=1; i<=18; i++)); do last_key=`keyctl newring foo$i $ring`; done
      	keyctl timeout $last_key 2
      
      Doing this:
      
      	echo 3 >/proc/sys/kernel/keys/gc_delay
      
      first will speed things up.
      
      If we do fall off of the top of the tree, we get the following oops:
      
      BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
      IP: [<ffffffff8136cea7>] assoc_array_gc+0x2f7/0x540
      PGD dae15067 PUD cfc24067 PMD 0
      Oops: 0000 [#1] SMP
      Modules linked in: xt_nat xt_mark nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_ni
      CPU: 0 PID: 26011 Comm: kworker/0:1 Not tainted 3.14.9-200.fc20.x86_64 #1
      Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      Workqueue: events key_garbage_collector
      task: ffff8800918bd580 ti: ffff8800aac14000 task.ti: ffff8800aac14000
      RIP: 0010:[<ffffffff8136cea7>] [<ffffffff8136cea7>] assoc_array_gc+0x2f7/0x540
      RSP: 0018:ffff8800aac15d40  EFLAGS: 00010206
      RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800aaecacc0
      RDX: ffff8800daecf440 RSI: 0000000000000001 RDI: ffff8800aadc2bc0
      RBP: ffff8800aac15da8 R08: 0000000000000001 R09: 0000000000000003
      R10: ffffffff8136ccc7 R11: 0000000000000000 R12: 0000000000000000
      R13: 0000000000000000 R14: 0000000000000070 R15: 0000000000000001
      FS:  0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      CR2: 0000000000000018 CR3: 00000000db10d000 CR4: 00000000000006f0
      Stack:
       ffff8800aac15d50 0000000000000011 ffff8800aac15db8 ffffffff812e2a70
       ffff880091a00600 0000000000000000 ffff8800aadc2bc3 00000000cd42c987
       ffff88003702df20 ffff88003702dfa0 0000000053b65c09 ffff8800aac15fd8
      Call Trace:
       [<ffffffff812e2a70>] ? keyring_detect_cycle_iterator+0x30/0x30
       [<ffffffff812e3e75>] keyring_gc+0x75/0x80
       [<ffffffff812e1424>] key_garbage_collector+0x154/0x3c0
       [<ffffffff810a67b6>] process_one_work+0x176/0x430
       [<ffffffff810a744b>] worker_thread+0x11b/0x3a0
       [<ffffffff810a7330>] ? rescuer_thread+0x3b0/0x3b0
       [<ffffffff810ae1a8>] kthread+0xd8/0xf0
       [<ffffffff810ae0d0>] ? insert_kthread_work+0x40/0x40
       [<ffffffff816ffb7c>] ret_from_fork+0x7c/0xb0
       [<ffffffff810ae0d0>] ? insert_kthread_work+0x40/0x40
      Code: 08 4c 8b 22 0f 84 bf 00 00 00 41 83 c7 01 49 83 e4 fc 41 83 ff 0f 4c 89 65 c0 0f 8f 5a fe ff ff 48 8b 45 c0 4d 63 cf 49 83 c1 02 <4e> 8b 34 c8 4d 85 f6 0f 84 be 00 00 00 41 f6 c6 01 0f 84 92
      RIP  [<ffffffff8136cea7>] assoc_array_gc+0x2f7/0x540
       RSP <ffff8800aac15d40>
      CR2: 0000000000000018
      ---[ end trace 1129028a088c0cbd ]---
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Acked-by: default avatarDon Zickus <dzickus@redhat.com>
      Signed-off-by: default avatarJames Morris <james.l.morris@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a4b9e45f
    • David Howells's avatar
      KEYS: Fix use-after-free in assoc_array_gc() · b3c24771
      David Howells authored
      commit 27419604 upstream.
      
      An edit script should be considered inaccessible by a function once it has
      called assoc_array_apply_edit() or assoc_array_cancel_edit().
      
      However, assoc_array_gc() is accessing the edit script just after the
      gc_complete: label.
      Reported-by: default avatarAndreea-Cristina Bernat <bernat.ada@gmail.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Reviewed-by: default avatarAndreea-Cristina Bernat <bernat.ada@gmail.com>
      cc: shemming@brocade.com
      cc: paulmck@linux.vnet.ibm.com
      Signed-off-by: default avatarJames Morris <james.l.morris@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b3c24771
    • Pavel Shilovsky's avatar
      CIFS: Fix SMB2 readdir error handling · c857808d
      Pavel Shilovsky authored
      commit 52755808 upstream.
      
      SMB2 servers indicates the end of a directory search with
      STATUS_NO_MORE_FILE error code that is not processed now.
      This causes generic/257 xfstest to fail. Fix this by triggering
      the end of search by this error code in SMB2_query_directory.
      
      Also when negotiating CIFS protocol we tell the server to close
      the search automatically at the end and there is no need to do
      it itself. In the case of SMB2 protocol, we need to close it
      explicitly - separate close directory checks for different
      protocols.
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c857808d
    • Linus Torvalds's avatar
      vfs: fix bad hashing of dentries · b5cf3193
      Linus Torvalds authored
      commit 99d263d4 upstream.
      
      Josef Bacik found a performance regression between 3.2 and 3.10 and
      narrowed it down to commit bfcfaa77 ("vfs: use 'unsigned long'
      accesses for dcache name comparison and hashing"). He reports:
      
       "The test case is essentially
      
            for (i = 0; i < 1000000; i++)
                    mkdir("a$i");
      
        On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k
        dir/sec with 3.10.  This is because we spend waaaaay more time in
        __d_lookup on 3.10 than in 3.2.
      
        The new hashing function for strings is suboptimal for <
        sizeof(unsigned long) string names (and hell even > sizeof(unsigned
        long) string names that I've tested).  I broke out the old hashing
        function and the new one into a userspace helper to get real numbers
        and this is what I'm getting:
      
            Old hash table had 1000000 entries, 0 dupes, 0 max dupes
            New hash table had 12628 entries, 987372 dupes, 900 max dupes
            We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash
      
        My test does the hash, and then does the d_hash into a integer pointer
        array the same size as the dentry hash table on my system, and then
        just increments the value at the address we got to see how many
        entries we overlap with.
      
        As you can see the old hash function ended up with all 1 million
        entries in their own bucket, whereas the new one they are only
        distributed among ~12.5k buckets, which is why we're using so much
        more CPU in __d_lookup".
      
      The reason for this hash regression is two-fold:
      
       - On 64-bit architectures the down-mixing of the original 64-bit
         word-at-a-time hash into the final 32-bit hash value is very
         simplistic and suboptimal, and just adds the two 32-bit parts
         together.
      
         In particular, because there is no bit shuffling and the mixing
         boundary is also a byte boundary, similar character patterns in the
         low and high word easily end up just canceling each other out.
      
       - the old byte-at-a-time hash mixed each byte into the final hash as it
         hashed the path component name, resulting in the low bits of the hash
         generally being a good source of hash data.  That is not true for the
         word-at-a-time case, and the hash data is distributed among all the
         bits.
      
      The fix is the same in both cases: do a better job of mixing the bits up
      and using as much of the hash data as possible.  We already have the
      "hash_32|64()" functions to do that.
      Reported-by: default avatarJosef Bacik <jbacik@fb.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Chris Mason <clm@fb.com>
      Cc: linux-fsdevel@vger.kernel.org
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b5cf3193
    • Mario Kleiner's avatar
      drm/nouveau: Bump version from 1.1.1 to 1.1.2 · b80e6286
      Mario Kleiner authored
      commit 7820e5ee upstream.
      
      Linux 3.16 fixed multiple bugs in kms pageflip completion events
      and timestamping, which were originally introduced in Linux 3.13.
      
      These fixes have been backported to all stable kernels since 3.13.
      
      However, the userspace nouveau-ddx needs to be aware if it is
      running on a kernel on which these bugs are fixed, or not.
      
      Bump the patchlevel of the drm driver version to signal this,
      so backporting this patch to stable 3.13+ kernels will give the
      ddx the required info.
      Signed-off-by: default avatarMario Kleiner <mario.kleiner.de@gmail.com>
      Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b80e6286
    • Mario Kleiner's avatar
      drm/nouveau: Dis/Enable vblank irqs during suspend/resume. · a82fd712
      Mario Kleiner authored
      commit 9cba5efa upstream.
      
      Vblank irqs don't get disabled during suspend or driver
      unload, which causes irq delivery after "suspend" or
      driver unload, at least until the gpu is powered off.
      This could race with drm_vblank_cleanup() in the case
      of nouveau and cause a use-after-free bug if the driver
      is unloaded.
      
      More annoyingly during everyday use, at least on nv50
      display engine (likely also others), vblank irqs are
      off after a resume from suspend, but the drm doesn't
      know this, so all vblank related functionality is dead
      after a resume. E.g., all windowed OpenGL clients will
      hang at swapbuffers time, as well as many fullscreen
      clients in many cases. This makes suspend/resume useless
      if one wants to use any OpenGL apps after the resume.
      
      In Linux 3.16, drm_vblank_on() was added, complementing
      the older drm_vblank_off()  to solve these problems
      elegantly, so use those calls in nouveaus suspend/resume
      code.
      
      For kernels 3.8 - 3.15, we need to cherry-pick the
      drm_vblank_on() patch to support this patch.
      Signed-off-by: default avatarMario Kleiner <mario.kleiner.de@gmail.com>
      Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a82fd712
    • Bart Van Assche's avatar
      IB/srp: Fix deadlock between host removal and multipathd · 1b29db8c
      Bart Van Assche authored
      commit bcc05910 upstream.
      
      If scsi_remove_host() is invoked after a SCSI device has been blocked,
      if the fast_io_fail_tmo or dev_loss_tmo work gets scheduled on the
      workqueue executing srp_remove_work() and if an I/O request is
      scheduled after the SCSI device had been blocked by e.g. multipathd
      then the following deadlock can occur:
      
          kworker/6:1     D ffff880831f3c460     0   195      2 0x00000000
          Call Trace:
           [<ffffffff814aafd9>] schedule+0x29/0x70
           [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0
           [<ffffffff8105af6f>] msleep+0x2f/0x40
           [<ffffffff8123b0ae>] __blk_drain_queue+0x4e/0x180
           [<ffffffff8123d2d5>] blk_cleanup_queue+0x225/0x230
           [<ffffffffa0010732>] __scsi_remove_device+0x62/0xe0 [scsi_mod]
           [<ffffffffa000ed2f>] scsi_forget_host+0x6f/0x80 [scsi_mod]
           [<ffffffffa0002eba>] scsi_remove_host+0x7a/0x130 [scsi_mod]
           [<ffffffffa07cf5c5>] srp_remove_work+0x95/0x180 [ib_srp]
           [<ffffffff8106d7aa>] process_one_work+0x1ea/0x6c0
           [<ffffffff8106dd9b>] worker_thread+0x11b/0x3a0
           [<ffffffff810758bd>] kthread+0xed/0x110
           [<ffffffff814b972c>] ret_from_fork+0x7c/0xb0
          multipathd      D ffff880096acc460     0  5340      1 0x00000000
          Call Trace:
           [<ffffffff814aafd9>] schedule+0x29/0x70
           [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0
           [<ffffffff814ab79b>] io_schedule_timeout+0x9b/0xf0
           [<ffffffff814abe1c>] wait_for_completion_io_timeout+0xdc/0x110
           [<ffffffff81244b9b>] blk_execute_rq+0x9b/0x100
           [<ffffffff8124f665>] sg_io+0x1a5/0x450
           [<ffffffff8124fd21>] scsi_cmd_ioctl+0x2a1/0x430
           [<ffffffff8124fef2>] scsi_cmd_blk_ioctl+0x42/0x50
           [<ffffffffa00ec97e>] sd_ioctl+0xbe/0x140 [sd_mod]
           [<ffffffff8124bd04>] blkdev_ioctl+0x234/0x840
           [<ffffffff811cb491>] block_ioctl+0x41/0x50
           [<ffffffff811a0df0>] do_vfs_ioctl+0x300/0x520
           [<ffffffff811a1051>] SyS_ioctl+0x41/0x80
           [<ffffffff814b9962>] tracesys+0xd0/0xd5
      
      Fix this by scheduling removal work on another workqueue than the
      transport layer timers.
      Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
      Reviewed-by: default avatarSagi Grimberg <sagig@mellanox.com>
      Reviewed-by: default avatarDavid Dillow <dave@thedillows.org>
      Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
      Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1b29db8c
    • Jeff Moyer's avatar
      dm table: propagate QUEUE_FLAG_NO_SG_MERGE · 05a09533
      Jeff Moyer authored
      commit 200612ec upstream.
      
      Commit 05f1dd53 ("block: add queue flag for disabling SG merging")
      introduced a new queue flag: QUEUE_FLAG_NO_SG_MERGE.  This gets set by
      default in blk_mq_init_queue for mq-enabled devices.  The effect of
      the flag is to bypass the SG segment merging.  Instead, the
      bio->bi_vcnt is used as the number of hardware segments.
      
      With a device mapper target on top of a device with
      QUEUE_FLAG_NO_SG_MERGE set, we can end up sending down more segments
      than a driver is prepared to handle.  I ran into this when backporting
      the virtio_blk mq support.  It triggerred this BUG_ON, in
      virtio_queue_rq:
      
              BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems);
      
      The queue's max is set here:
              blk_queue_max_segments(q, vblk->sg_elems-2);
      
      Basically, what happens is that a bio is built up for the dm device
      (which does not have the QUEUE_FLAG_NO_SG_MERGE flag set) using
      bio_add_page.  That path will call into __blk_recalc_rq_segments, so
      what you end up with is bi_phys_segments being much smaller than bi_vcnt
      (and bi_vcnt grows beyond the maximum sg elements).  Then, when the bio
      is submitted, it gets cloned.  When the cloned bio is submitted, it will
      end up in blk_recount_segments, here:
      
              if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags))
                      bio->bi_phys_segments = bio->bi_vcnt;
      
      and now we've set bio->bi_phys_segments to a number that is beyond what
      was registered as queue_max_segments by the driver.
      
      The right way to fix this is to propagate the queue flag up the stack.
      
      The rules for propagating the flag are simple:
      - if the flag is set for any underlying device, it must be set for the
        upper device
      - consequently, if the flag is not set for any underlying device, it
        should not be set for the upper device.
      Signed-off-by: default avatarJeff Moyer <jmoyer@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      05a09533
    • Roger Quadros's avatar
      mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc() · 20c0fb35
      Roger Quadros authored
      commit 40ddbf50 upstream.
      
      commit 65b97cf6 introduced in v3.7 caused a regression
      by using a reversed CS_MASK thus causing omap_calculate_ecc to
      always fail. As the NAND base driver never checks for .calculate()'s
      return value, the zeroed ECC values are used as is without showing
      any error to the user. However, this won't work and the NAND device
      won't be guarded by any error code.
      
      Fix the issue by using the correct mask.
      
      Code was tested on omap3beagle using the following procedure
      - flash the primary bootloader (MLO) from the kernel to the first
      NAND partition using nandwrite.
      - boot the board from NAND. This utilizes OMAP ROM loader that
      relies on 1-bit Hamming code ECC.
      
      Fixes: 65b97cf6 (mtd: nand: omap2: handle nand on gpmc)
      Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      20c0fb35
    • Kevin Hao's avatar
      mtd/ftl: fix the double free of the buffers allocated in build_maps() · 711f8bcf
      Kevin Hao authored
      commit a152056c upstream.
      
      I got the following panic on my fsl p5020ds board.
      
        Unable to handle kernel paging request for data at address 0x7375627379737465
        Faulting instruction address: 0xc000000000100778
        Oops: Kernel access of bad area, sig: 11 [#1]
        SMP NR_CPUS=24 CoreNet Generic
        Modules linked in:
        CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145
        task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000
        NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000
        REGS: c0000000fe08aa00 TRAP: 0300   Not tainted  (3.15.0-next-20140613)
        MSR: 0000000080029000 <CE,EE,ME>  CR: 24ad2e24  XER: 00000000
        DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1
        GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80
        GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000
        GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200
        GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000
        GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8
        GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10
        GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400
        GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80
        NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168
        LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168
        Call Trace:
        [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable)
        [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90
        [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130
        [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64
        [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8
        [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc
        [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384
        [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8
        [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654
        [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4
        [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514
        [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4
        [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94
        [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368
        [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104
        [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734
        [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84
        [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c
        [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104
        [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4
        [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38
        [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac
        [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158
        [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80
        [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30
        [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238
        [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268
        [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c
        [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4
        Instruction dump:
        41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008
        7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2
        ---[ end trace b4c9a94804a42d40 ]---
      
      It seems that the corrupted partition header on my mtd device triggers
      a bug in the ftl. In function build_maps() it will allocate the buffers
      needed by the mtd partition, but if something goes wrong such as kmalloc
      failure, mtd read error or invalid partition header parameter, it will
      free all allocated buffers and then return non-zero. In my case, it
      seems that partition header parameter 'NumTransferUnits' is invalid.
      
      And the ftl_freepart() is a function which free all the partition
      buffers allocated by build_maps(). Given the build_maps() is a self
      cleaning function, so there is no need to invoke this function even
      if build_maps() return with error. Otherwise it will causes the
      buffers to be freed twice and then weird things would happen.
      Signed-off-by: default avatarKevin Hao <haokexin@gmail.com>
      Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      711f8bcf
    • Pavel Shilovsky's avatar
      CIFS: Fix wrong restart readdir for SMB1 · f586b768
      Pavel Shilovsky authored
      commit f736906a upstream.
      
      The existing code calls server->ops->close() that is not
      right. This causes XFS test generic/310 to fail. Fix this
      by using server->ops->closedir() function.
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f586b768
    • Pavel Shilovsky's avatar
      CIFS: Fix wrong filename length for SMB2 · be462337
      Pavel Shilovsky authored
      commit 1bbe4997 upstream.
      
      The existing code uses the old MAX_NAME constant. This causes
      XFS test generic/013 to fail. Fix it by replacing MAX_NAME with
      PATH_MAX that SMB1 uses. Also remove an unused MAX_NAME constant
      definition.
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be462337
    • Pavel Shilovsky's avatar
      CIFS: Fix directory rename error · cb22458c
      Pavel Shilovsky authored
      commit a07d3220 upstream.
      
      CIFS servers process nlink counts differently for files and directories.
      In cifs_rename() if we the request fails on the existing target, we
      try to remove it through cifs_unlink() but this is not what we want
      to do for directories. As the result the following sequence of commands
      
      mkdir {1,2}; mv -T 1 2; rmdir {1,2}; mkdir {1,2}; echo foo > 2/bar
      
      and XFS test generic/023 fail with -ENOENT error. That's why the second
      mkdir reuses the existing inode (target inode of the mv -T command) with
      S_DEAD flag.
      
      Fix this by checking whether the target is directory or not and
      calling cifs_rmdir() rather than cifs_unlink() for directories.
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cb22458c
    • Pavel Shilovsky's avatar
      CIFS: Fix wrong directory attributes after rename · 7454dc80
      Pavel Shilovsky authored
      commit b46799a8 upstream.
      
      When we requests rename we also need to update attributes
      of both source and target parent directories. Not doing it
      causes generic/309 xfstest to fail on SMB2 mounts. Fix this
      by marking these directories for force revalidating.
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7454dc80
    • Steve French's avatar
      CIFS: Possible null ptr deref in SMB2_tcon · fa7007a5
      Steve French authored
      commit 18f39e7b upstream.
      
      As Raphael Geissert pointed out, tcon_error_exit can dereference tcon
      and there is one path in which tcon can be null.
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Reported-by: default avatarRaphael Geissert <geissert@debian.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fa7007a5
    • Pavel Shilovsky's avatar
      CIFS: Fix async reading on reconnects · 09f07a14
      Pavel Shilovsky authored
      commit 038bc961 upstream.
      
      If we get into read_into_pages() from cifs_readv_receive() and then
      loose a network, we issue cifs_reconnect that moves all mids to
      a private list and issue their callbacks. The callback of the async
      read request sets a mid to retry, frees it and wakes up a process
      that waits on the rdata completion.
      
      After the connection is established we return from read_into_pages()
      with a short read, use the mid that was freed before and try to read
      the remaining data from the a newly created socket. Both actions are
      not what we want to do. In reconnect cases (-EAGAIN) we should not
      mask off the error with a short read but should return the error
      code instead.
      Acked-by: default avatarJeff Layton <jlayton@samba.org>
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      09f07a14
    • Pavel Shilovsky's avatar
      CIFS: Fix STATUS_CANNOT_DELETE error mapping for SMB2 · fd6cb8b1
      Pavel Shilovsky authored
      commit 21496687 upstream.
      
      The existing mapping causes unlink() call to return error after delete
      operation. Changing the mapping to -EACCES makes the client process
      the call like CIFS protocol does - reset dos attributes with ATTR_READONLY
      flag masked off and retry the operation.
      Signed-off-by: default avatarPavel Shilovsky <pshilovsky@samba.org>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fd6cb8b1
    • Ilya Dryomov's avatar
      libceph: do not hard code max auth ticket len · 346acdff
      Ilya Dryomov authored
      commit c27a3e4d upstream.
      
      We hard code cephx auth ticket buffer size to 256 bytes.  This isn't
      enough for any moderate setups and, in case tickets themselves are not
      encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but
      ceph_decode_copy() doesn't - it's just a memcpy() wrapper).  Since the
      buffer is allocated dynamically anyway, allocated it a bit later, at
      the point where we know how much is going to be needed.
      
      Fixes: http://tracker.ceph.com/issues/8979Signed-off-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      Reviewed-by: default avatarSage Weil <sage@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      346acdff
    • Ilya Dryomov's avatar
      libceph: add process_one_ticket() helper · fc65783a
      Ilya Dryomov authored
      commit 597cda35 upstream.
      
      Add a helper for processing individual cephx auth tickets.  Needed for
      the next commit, which deals with allocating ticket buffers.  (Most of
      the diff here is whitespace - view with git diff -b).
      Signed-off-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      Reviewed-by: default avatarSage Weil <sage@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fc65783a
    • Sage Weil's avatar
      libceph: gracefully handle large reply messages from the mon · 7fa66ee4
      Sage Weil authored
      commit 73c3d481 upstream.
      
      We preallocate a few of the message types we get back from the mon.  If we
      get a larger message than we are expecting, fall back to trying to allocate
      a new one instead of blindly using the one we have.
      Signed-off-by: default avatarSage Weil <sage@redhat.com>
      Reviewed-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7fa66ee4
    • Ilya Dryomov's avatar
      libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly · b704f8b1
      Ilya Dryomov authored
      commit 5f740d7e upstream.
      
      Determining ->last_piece based on the value of ->page_offset + length
      is incorrect because length here is the length of the entire message.
      ->last_piece set to false even if page array data item length is <=
      PAGE_SIZE, which results in invalid length passed to
      ceph_tcp_{send,recv}page() and causes various asserts to fire.
      
          # cat pages-cursor-init.sh
          #!/bin/bash
          rbd create --size 10 --image-format 2 foo
          FOO_DEV=$(rbd map foo)
          dd if=/dev/urandom of=$FOO_DEV bs=1M &>/dev/null
          rbd snap create foo@snap
          rbd snap protect foo@snap
          rbd clone foo@snap bar
          # rbd_resize calls librbd rbd_resize(), size is in bytes
          ./rbd_resize bar $(((4 << 20) + 512))
          rbd resize --size 10 bar
          BAR_DEV=$(rbd map bar)
          # trigger a 512-byte copyup -- 512-byte page array data item
          dd if=/dev/urandom of=$BAR_DEV bs=1M count=1 seek=5
      
      The problem exists only in ceph_msg_data_pages_cursor_init(),
      ceph_msg_data_pages_advance() does the right thing.  The size_t cast is
      unnecessary.
      Signed-off-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      Reviewed-by: default avatarSage Weil <sage@redhat.com>
      Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b704f8b1
    • Chris Mason's avatar
      xfs: don't zero partial page cache pages during O_DIRECT writes · 2f3219f6
      Chris Mason authored
      commit 85e584da upstream.
      
      xfs is using truncate_pagecache_range to invalidate the page cache
      during DIO reads.  This is different from the other filesystems who
      only invalidate pages during DIO writes.
      
      truncate_pagecache_range is meant to be used when we are freeing the
      underlying data structs from disk, so it will zero any partial
      ranges in the page.  This means a DIO read can zero out part of the
      page cache page, and it is possible the page will stay in cache.
      
      buffered reads will find an up to date page with zeros instead of
      the data actually on disk.
      
      This patch fixes things by using invalidate_inode_pages2_range
      instead.  It preserves the page cache invalidation, but won't zero
      any pages.
      
      [dchinner: catch error and warn if it fails. Comment.]
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2f3219f6
    • Dave Chinner's avatar
      xfs: don't zero partial page cache pages during O_DIRECT writes · d2f8462e
      Dave Chinner authored
      commit 834ffca6 upstream.
      
      Similar to direct IO reads, direct IO writes are using
      truncate_pagecache_range to invalidate the page cache. This is
      incorrect due to the sub-block zeroing in the page cache that
      truncate_pagecache_range() triggers.
      
      This patch fixes things by using invalidate_inode_pages2_range
      instead.  It preserves the page cache invalidation, but won't zero
      any pages.
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d2f8462e
    • Dave Chinner's avatar
      xfs: don't dirty buffers beyond EOF · 4fa1c311
      Dave Chinner authored
      commit 22e757a4 upstream.
      
      generic/263 is failing fsx at this point with a page spanning
      EOF that cannot be invalidated. The operations are:
      
      1190 mapwrite   0x52c00 thru    0x5e569 (0xb96a bytes)
      1191 mapread    0x5c000 thru    0x5d636 (0x1637 bytes)
      1192 write      0x5b600 thru    0x771ff (0x1bc00 bytes)
      
      where 1190 extents EOF from 0x54000 to 0x5e569. When the direct IO
      write attempts to invalidate the cached page over this range, it
      fails with -EBUSY and so any attempt to do page invalidation fails.
      
      The real question is this: Why can't that page be invalidated after
      it has been written to disk and cleaned?
      
      Well, there's data on the first two buffers in the page (1k block
      size, 4k page), but the third buffer on the page (i.e. beyond EOF)
      is failing drop_buffers because it's bh->b_state == 0x3, which is
      BH_Uptodate | BH_Dirty.  IOWs, there's dirty buffers beyond EOF. Say
      what?
      
      OK, set_buffer_dirty() is called on all buffers from
      __set_page_buffers_dirty(), regardless of whether the buffer is
      beyond EOF or not, which means that when we get to ->writepage,
      we have buffers marked dirty beyond EOF that we need to clean.
      So, we need to implement our own .set_page_dirty method that
      doesn't dirty buffers beyond EOF.
      
      This is messy because the buffer code is not meant to be shared
      and it has interesting locking issues on the buffer dirty bits.
      So just copy and paste it and then modify it to suit what we need.
      
      Note: the solutions the other filesystems and generic block code use
      of marking the buffers clean in ->writepage does not work for XFS.
      It still leaves dirty buffers beyond EOF and invalidations still
      fail. Hence rather than play whack-a-mole, this patch simply
      prevents those buffers from being dirtied in the first place.
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4fa1c311
    • Dave Chinner's avatar
      xfs: quotacheck leaves dquot buffers without verifiers · 4dbaf782
      Dave Chinner authored
      commit 5fd364fe upstream.
      
      When running xfs/305, I noticed that quotacheck was flushing dquot
      buffers that did not have the xfs_dquot_buf_ops verifiers attached:
      
      XFS (vdb): _xfs_buf_ioapply: no ops on block 0x1dc8/0x1dc8
      ffff880052489000: 44 51 01 04 00 00 65 b8 00 00 00 00 00 00 00 00  DQ....e.........
      ffff880052489010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      ffff880052489020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      ffff880052489030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      CPU: 1 PID: 2376 Comm: mount Not tainted 3.16.0-rc2-dgc+ #306
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
       ffff88006fe38000 ffff88004a0ffae8 ffffffff81cf1cca 0000000000000001
       ffff88004a0ffb88 ffffffff814d50ca 000010004a0ffc70 0000000000000000
       ffff88006be56dc4 0000000000000021 0000000000001dc8 ffff88007c773d80
      Call Trace:
       [<ffffffff81cf1cca>] dump_stack+0x45/0x56
       [<ffffffff814d50ca>] _xfs_buf_ioapply+0x3ca/0x3d0
       [<ffffffff810db520>] ? wake_up_state+0x20/0x20
       [<ffffffff814d51f5>] ? xfs_bdstrat_cb+0x55/0xb0
       [<ffffffff814d513b>] xfs_buf_iorequest+0x6b/0xd0
       [<ffffffff814d51f5>] xfs_bdstrat_cb+0x55/0xb0
       [<ffffffff814d53ab>] __xfs_buf_delwri_submit+0x15b/0x220
       [<ffffffff814d6040>] ? xfs_buf_delwri_submit+0x30/0x90
       [<ffffffff814d6040>] xfs_buf_delwri_submit+0x30/0x90
       [<ffffffff8150f89d>] xfs_qm_quotacheck+0x17d/0x3c0
       [<ffffffff81510591>] xfs_qm_mount_quotas+0x151/0x1e0
       [<ffffffff814ed01c>] xfs_mountfs+0x56c/0x7d0
       [<ffffffff814f0f12>] xfs_fs_fill_super+0x2c2/0x340
       [<ffffffff811c9fe4>] mount_bdev+0x194/0x1d0
       [<ffffffff814f0c50>] ? xfs_finish_flags+0x170/0x170
       [<ffffffff814ef0f5>] xfs_fs_mount+0x15/0x20
       [<ffffffff811ca8c9>] mount_fs+0x39/0x1b0
       [<ffffffff811e4d67>] vfs_kern_mount+0x67/0x120
       [<ffffffff811e757e>] do_mount+0x23e/0xad0
       [<ffffffff8117abde>] ? __get_free_pages+0xe/0x50
       [<ffffffff811e71e6>] ? copy_mount_options+0x36/0x150
       [<ffffffff811e8103>] SyS_mount+0x83/0xc0
       [<ffffffff81cfd40b>] tracesys+0xdd/0xe2
      
      This was caused by dquot buffer readahead not attaching a verifier
      structure to the buffer when readahead was issued, resulting in the
      followup read of the buffer finding a valid buffer and so not
      attaching new verifiers to the buffer as part of the read.
      
      Also, when a verifier failure occurs, we then read the buffer
      without verifiers. Attach the verifiers manually after this read so
      that if the buffer is then written it will be verified that the
      corruption has been repaired.
      
      Further, when flushing a dquot we don't ask for a verifier when
      reading in the dquot buffer the dquot belongs to. Most of the time
      this isn't an issue because the buffer is still cached, but when it
      is not cached it will result in writing the dquot buffer without
      having the verfier attached.
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4dbaf782
    • Dave Chinner's avatar
      xfs: ensure verifiers are attached to recovered buffers · 13c22aa3
      Dave Chinner authored
      commit 67dc288c upstream.
      
      Crash testing of CRC enabled filesystems has resulted in a number of
      reports of bad CRCs being detected after the filesystem was mounted.
      Errors such as the following were being seen:
      
      XFS (sdb3): Mounting V5 Filesystem
      XFS (sdb3): Starting recovery (logdev: internal)
      XFS (sdb3): Metadata CRC error detected at xfs_agf_read_verify+0x5a/0x100 [xfs], block 0x1
      XFS (sdb3): Unmount and run xfs_repair
      XFS (sdb3): First 64 bytes of corrupted metadata buffer:
      ffff880136ffd600: 58 41 47 46 00 00 00 01 00 00 00 00 00 0f aa 40  XAGF...........@
      ffff880136ffd610: 00 02 6d 53 00 02 77 f8 00 00 00 00 00 00 00 01  ..mS..w.........
      ffff880136ffd620: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 03  ................
      ffff880136ffd630: 00 00 00 04 00 08 81 d0 00 08 81 a7 00 00 00 00  ................
      XFS (sdb3): metadata I/O error: block 0x1 ("xfs_trans_read_buf_map") error 74 numblks 1
      
      The errors were typically being seen in AGF, AGI and their related
      btree block buffers some time after log recovery had run. Often it
      wasn't until later subsequent mounts that the problem was
      discovered. The common symptom was a buffer with the correct
      contents, but a CRC and an LSN that matched an older version of the
      contents.
      
      Some debug added to _xfs_buf_ioapply() indicated that buffers were
      being written without verifiers attached to them from log recovery,
      and Jan Kara isolated the cause to log recovery readahead an dit's
      interactions with buffers that had a more recent LSN on disk than
      the transaction being recovered. In this case, the buffer did not
      get a verifier attached, and os when the second phase of log
      recovery ran and recovered EFIs and unlinked inodes, the buffers
      were modified and written without the verifier running. Hence they
      had up to date contents, but stale LSNs and CRCs.
      
      Fix it by attaching verifiers to buffers we skip due to future LSN
      values so they don't escape into the buffer cache without the
      correct verifier attached.
      
      This patch is based on analysis and a patch from Jan Kara.
      Reported-by: default avatarJan Kara <jack@suse.cz>
      Reported-by: default avatarFanael Linithien <fanael4@gmail.com>
      Reported-by: default avatarGrozdan <neutrino8@gmail.com>
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      13c22aa3
    • Doug Ledford's avatar
      RDMA/uapi: Include socket.h in rdma_user_cm.h · 5126045d
      Doug Ledford authored
      commit db1044d4 upstream.
      
      added struct sockaddr_storage to rdma_user_cm.h without also adding an
      include for linux/socket.h to make sure it is defined.  Systemtap
      needs the header files to build standalone and cannot rely on other
      files to pre-include other headers, so add linux/socket.h to the list
      of includes in this file.
      
      Fixes: ee7aed45 ("RDMA/ucma: Support querying for AF_IB addresses")
      Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
      Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5126045d
    • Steve Wise's avatar
      RDMA/iwcm: Use a default listen backlog if needed · c06a9fa5
      Steve Wise authored
      commit 2f0304d2 upstream.
      
      If the user creates a listening cm_id with backlog of 0 the IWCM ends
      up not allowing any connection requests at all.  The correct behavior
      is for the IWCM to pick a default value if the user backlog parameter
      is zero.
      
      Lustre from version 1.8.8 onward uses a backlog of 0, which breaks
      iwarp support without this fix.
      Signed-off-by: default avatarSteve Wise <swise@opengridcomputing.com>
      Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c06a9fa5
    • NeilBrown's avatar
      md/raid10: Fix memory leak when raid10 reshape completes. · ad70570f
      NeilBrown authored
      commit b3968552 upstream.
      
      When a raid10 commences a resync/recovery/reshape it allocates
      some buffer space.
      When a resync/recovery completes the buffer space is freed.  But not
      when the reshape completes.
      This can result in a small memory leak.
      
      There is a subtle side-effect of this bug.  When a RAID10 is reshaped
      to a larger array (more devices), the reshape is immediately followed
      by a "resync" of the new space.  This "resync" will use the buffer
      space which was allocated for "reshape".  This can cause problems
      including a "BUG" in the SCSI layer.  So this is suitable for -stable.
      
      Fixes: 3ea7daa5Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ad70570f
    • NeilBrown's avatar
      md/raid10: fix memory leak when reshaping a RAID10. · 62906bc6
      NeilBrown authored
      commit ce0b0a46 upstream.
      
      raid10 reshape clears unwanted bits from a bio->bi_flags using
      a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC
      was added.
      Since then it clears that bit but shouldn't.  This results in a
      memory leak.
      
      So change to used the approved method of clearing unwanted bits.
      
      As this causes a memory leak which can consume all of memory
      the fix is suitable for -stable.
      
      Fixes: a38352e0
      Reported-by: mdraid.pkoch@dfgh.net (Peter Koch)
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      62906bc6
    • NeilBrown's avatar
      md/raid6: avoid data corruption during recovery of double-degraded RAID6 · ba1f6592
      NeilBrown authored
      commit 9c4bdf69 upstream.
      
      During recovery of a double-degraded RAID6 it is possible for
      some blocks not to be recovered properly, leading to corruption.
      
      If a write happens to one block in a stripe that would be written to a
      missing device, and at the same time that stripe is recovering data
      to the other missing device, then that recovered data may not be written.
      
      This patch skips, in the double-degraded case, an optimisation that is
      only safe for single-degraded arrays.
      
      Bug was introduced in 2.6.32 and fix is suitable for any kernel since
      then.  In an older kernel with separate handle_stripe5() and
      handle_stripe6() functions the patch must change handle_stripe6().
      
      Fixes: 6c0069c0
      Cc: Yuri Tikhonov <yur@emcraft.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Reported-by: default avatar"Manibalan P" <pmanibalan@amiindia.co.in>
      Tested-by: default avatar"Manibalan P" <pmanibalan@amiindia.co.in>
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1090423Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      Acked-by: default avatarDan Williams <dan.j.williams@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ba1f6592
    • NeilBrown's avatar
      md/raid5: avoid livelock caused by non-aligned writes. · 706d9164
      NeilBrown authored
      commit a40687ff upstream.
      
      If a stripe in a raid6 array received a write to each data block while
      the array is degraded, and if any of these writes to a missing device
      are not page-aligned, then a live-lock happens.
      
      In this case the P and Q blocks need to be read so that the part of
      the missing block which is *not* being updated by the write can be
      constructed.  Due to a logic error, these blocks are not loaded, so
      the update cannot proceed and the stripe is 'handled' repeatedly in an
      infinite loop.
      
      This bug is unlikely as most writes are page aligned.  However as it
      can lead to a livelock it is suitable for -stable.  It was introduced
      in 3.16.
      
      Fixed: 67f45548Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      706d9164
    • NeilBrown's avatar
      md/raid1,raid10: always abort recover on write error. · ae2a0244
      NeilBrown authored
      commit 2446dba0 upstream.
      
      Currently we don't abort recovery on a write error if the write error
      to the recovering device was triggerd by normal IO (as opposed to
      recovery IO).
      
      This means that for one bitmap region, the recovery might write to the
      recovering device for a few sectors, then not bother for subsequent
      sectors (as it never writes to failed devices).  In this case
      the bitmap bit will be cleared, but it really shouldn't.
      
      The result is that if the recovering device fails and is then re-added
      (after fixing whatever hardware problem triggerred the failure),
      the second recovery won't redo the region it was in the middle of,
      so some of the device will not be recovered properly.
      
      If we abort the recovery, the region being processes will be cancelled
      (bit not cleared) and the whole region will be retried.
      
      As the bug can result in data corruption the patch is suitable for
      -stable.  For kernels prior to 3.11 there is a conflict in raid10.c
      which will require care.
      
      Original-from: jiao hui <jiaohui@bwstor.com.cn>
      Reported-and-tested-by: default avatarjiao hui <jiaohui@bwstor.com.cn>
      Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ae2a0244
    • Al Viro's avatar
      fix copy_tree() regression · 3fd72a0e
      Al Viro authored
      commit 12a5b529 upstream.
      
      Since 3.14 we had copy_tree() get the shadowing wrong - if we had one
      vfsmount shadowing another (i.e. if A is a slave of B, C is mounted
      on A/foo, then D got mounted on B/foo creating D' on A/foo shadowed
      by C), copy_tree() of A would make a copy of D' shadow the the copy of
      C, not the other way around.
      
      It's easy to fix, fortunately - just make sure that mount follows
      the one that shadows it in mnt_child as well as in mnt_hash, and when
      copy_tree() decides to attach a new mount, check if the last child
      it has added to the same parent should be shadowing the new one.
      And if it should, just use the same logics commit_tree() has - put the
      new mount into the hash and children lists right after the one that
      should shadow it.
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3fd72a0e
    • Ilya Dryomov's avatar
      rbd: rework rbd_request_fn() · 0fe6ae39
      Ilya Dryomov authored
      commit bc1ecc65 upstream.
      
      While it was never a good idea to sleep in request_fn(), commit
      34c6bc2c ("locking/mutexes: Add extra reschedule point") made it
      a *bad* idea.  mutex_lock() since 3.15 may reschedule *before* putting
      task on the mutex wait queue, which for tasks in !TASK_RUNNING state
      means block forever.  request_fn() may be called with !TASK_RUNNING on
      the way to schedule() in io_schedule().
      
      Offload request handling to a workqueue, one per rbd device, to avoid
      calling blocking primitives from rbd_request_fn().
      
      Fixes: http://tracker.ceph.com/issues/8818Signed-off-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      Tested-by: default avatarEric Eastman <eric0e@aol.com>
      Tested-by: default avatarGreg Wilson <greg.wilson@keepertech.com>
      Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0fe6ae39