Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).

  The major core change is a rework to remove the two helpers around
  scsi_execute_cmd and use it as the only submission interface along
  with other minor fixes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
  scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
  scsi: ufs: core: Fix device management cmd timeout flow
  scsi: aic94xx: Add missing check for dma_map_single()
  scsi: smartpqi: Replace one-element array with flexible-array member
  scsi: mpt3sas: Fix a memory leak
  scsi: qla2xxx: Remove the unused variable wwn
  scsi: ufs: core: Fix kernel-doc syntax
  scsi: ufs: core: Add hibernation callbacks
  scsi: snic: Fix memory leak with using debugfs_lookup()
  scsi: ufs: core: Limit DMA alignment check
  scsi: Documentation: Correct spelling
  scsi: Documentation: Correct spelling
  scsi: target: Documentation: Correct spelling
  scsi: aacraid: Allocate cmd_priv with scsicmd
  scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
  scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
  scsi: ufs: core: Enable DMA clustering
  scsi: ufs: exynos: Fix the maximum segment size
  scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
  ...

Pull ATA updates from Damien Le Moal:

 - Small cleanup of the pata_octeon driver to drop a useless platform
   callback (Uwe)

 - Simplify ata_scsi_cmd_error_handler() code using the fact that
   ap->ops->error_handler is NULL most of the time (Wenchao)

 - Several patches improving libata error handling. This is in
   preparation for supporting the command duration limits (CDL) feature.
   The changes allow handling corner cases of ATA NCQ errors which do
   not happen with regular drives but will be triggered with CDL drives
   (Niklas)

 - Simplify the qc_fill_rtf operation (me)

 - Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES
   command (me)

 - Cleanup of libata FUA handling.

   This falls short of enabling FUA for ATA drives that support it by
   default as there were concerns that old drives would break. The
   series however fixes several issues with the FUA support to ensure
   that FUA is reported as being supported only for drives that can
   handle all possible write cases (NCQ and non-NCQ). A check in the
   block layer is also added to ensure that we never see read FUA
   commands (current behavior) (me)

 - Several patches to move the old PARIDE (parallel port IDE) driver to
   libata as pata_parport. Given that this driver also needs protocol
   modules, the driver code resides in its own pata_parport directoy
   under drivers/ata (Ondrej)

* tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_parport: Fix ida_alloc return value error check
  drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport
  drivers/block: Remove PARIDE core and high-level protocols
  ata: pata_parport: add driver (PARIDE replacement)
  ata: libata: exclude FUA support for known buggy drives
  ata: libata: Fix FUA handling in ata_build_rw_tf()
  ata: libata: cleanup fua support detection
  ata: libata: Rename and cleanup ata_rwcmd_protocol()
  ata: libata: Introduce ata_ncq_supported()
  block: add a sanity check for non-write flush/fua bios
  ata: libata-scsi: improve ata_scsiop_maint_in()
  ata: libata-scsi: do not overwrite SCSI ML and status bytes
  ata: libata: move NCQ related ATA_DFLAGs
  ata: libata: respect successfully completed commands during errors
  ata: libata: read the shared status for successful NCQ commands once
  ata: libata: simplify qc_fill_rtf port operation interface
  ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH
  ata: libata-eh: Cleanup ata_scsi_cmd_error_handler()
  ata: octeon: Drop empty platform remove function

Merge tag 'for-6.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix DM cache target to free background tracker work items, otherwise
   slab BUG will occur when kmem_cache_destroy() is called.

 - Improve 2 of DM's shrinker names to reflect their use.

 - Fix the DM flakey target to not corrupt the zero page. Fix dm-flakey
   on 32-bit hughmem systems by using bvec_kmap_local instead of
   page_address. Also, fix logic used when imposing the
   "corrupt_bio_byte" feature.

 - Stop using WQ_UNBOUND for DM verity target's verify_wq because it
   causes significant Android latencies on ARM64 (and doesn't show real
   benefit on other architectures).

 - Add negative check to catch simple case of a DM table referencing
   itself. More complex scenarios that use intermediate devices to
   self-reference still need to be avoided/handled in userspace.

 - Fix DM core's resize to only send one uevent instead of two. This
   fixes a race with udev, that if udev wins, will cause udev to miss
   uevents (which caused premature unmount attempts by systemd).

 - Add cond_resched() to workqueue functions in DM core, dn-thin and
   dm-cache so that their loops aren't the cause of unintended cpu
   scheduling fairness issues.

 - Fix all of DM's checkpatch errors and warnings (famous last words).
   Various other small cleanups.

* tag 'for-6.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
  dm: remove unnecessary (void*) conversion in event_callback()
  dm ioctl: remove unnecessary check when using dm_get_mdptr()
  dm ioctl: assert _hash_lock is held in __hash_remove
  dm cache: add cond_resched() to various workqueue loops
  dm thin: add cond_resched() to various workqueue loops
  dm: add cond_resched() to dm_wq_requeue_work()
  dm: add cond_resched() to dm_wq_work()
  dm sysfs: make kobj_type structure constant
  dm: update targets using system workqueues to use a local workqueue
  dm: remove flush_scheduled_work() during local_exit()
  dm clone: prefer kvmalloc_array()
  dm: declare variables static when sensible
  dm: fix suspect indent whitespace
  dm ioctl: prefer strscpy() instead of strlcpy()
  dm: avoid void function return statements
  dm integrity: change macros min/max() -> min_t/max_t where appropriate
  dm: fix use of sizeof() macro
  dm: avoid 'do {} while(0)' loop in single statement macros
  dm log: avoid multiple line dereference
  dm log: avoid trailing semicolon in macro
  ...

Pull audit update from Paul Moore:
 "Just a single audit patch, and even that patch is pretty trivial as it
  only updates the mailing list entry in the MAINTAINERS file"

* tag 'audit-pr-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: update the mailing list in MAINTAINERS

Pull smack update from Casey Schaufler:
 "One fix for resetting CIPSO labeling"

* tag 'Smack-for-6.3' of https://github.com/cschaufler/smack-next:
  smackfs: Added check catlen

Pull landlock updates from Mickaël Salaün:
 "This improves documentation, and makes some tests more flexible to be
  able to run on systems without overlayfs or with Yama restrictions"

* tag 'landlock-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  MAINTAINERS: Update Landlock repository
  selftests/landlock: Test ptrace as much as possible with Yama
  selftests/landlock: Skip overlayfs tests when not supported
  landlock: Explain file descriptor access rights

Pull integrity update from Mimi Zohar:
 "One doc and one code cleanup, and two bug fixes"

* tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Introduce MMAP_CHECK_REQPROT hook
  ima: Align ima_file_mmap() parameters with mmap_file LSM hook
  evm: call dump_security_xattr() in all cases to remove code duplication
  ima: fix ima_delete_rules() kernel-doc warning
  ima: return IMA digest value only when IMA_COLLECTED flag is set
  ima: fix error handling logic when file measurement failed

Pull documentation updates from Jonathan Corbet:
 "It has been a moderately calm cycle for documentation; the significant
  changes include:

   - Some significant additions to the memory-management documentation

   - Some improvements to navigation in the HTML-rendered docs

   - More Spanish and Chinese translations

  ... and the usual set of typo fixes and such"

* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
  Documentation/watchdog/hpwdt: Fix Format
  Documentation/watchdog/hpwdt: Fix Reference
  Documentation: core-api: padata: correct spelling
  docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
  docs: Use HTML comments for the kernel-toc SPDX line
  docs: Add more information to the HTML sidebar
  Documentation: KVM: Update AMD memory encryption link
  printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
  Documentation: userspace-api: correct spelling
  Documentation: sparc: correct spelling
  Documentation: driver-api: correct spelling
  Documentation: admin-guide: correct spelling
  docs: add workload-tracing document to admin-guide
  docs/admin-guide/mm: remove useless markup
  docs/mm: remove useless markup
  docs/mm: Physical Memory: remove useless markup
  docs/sp_SP: Add process magic-number translation
  docs: ftrace: always use canonical ftrace path
  Doc/damon: fix the data path error
  dma-buf: Add "dma-buf" to title of documentation
  ...

Pull IPMI updates from Corey Minyard:
 "Small fixes to the SMBus IPMI and IPMB driver.

  Nothing big, cleanups, fixing names, and one small deviation from the
  specification fixed"

* tag 'for-linus-6.3-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'
  ipmi:ssif: Add a timer between request retries
  ipmi:ssif: Remove rtc_us_timer
  ipmi_ssif: Rename idle state and check
  ipmi:ssif: resend_msg() cannot fail

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Infineon TDA38640 Voltage Regulator

   - NXP MC34VR500 PMIC

   - GXP fan controller

   - MPQ7932 Power Management IC

  New chip or board support added to existing drivers:

   - it87: IT87952E; also other cleanup/improvements

   - intel-m10-bmc-hwmon: N6000

   - pmbus/max16601: MAX16600

   - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer
     Poweradjust 3, Aquacomputer Aquaero

   - nct6775: Support for B650/B660/X670 ASUS boards

   - oxp-sensors: AYANEO AIR and AIR Pro

  Other notable changes:

   - Various kernel documentation fixes

   - Various devicetree bindings fixes

   - Explicitly deprecated [devm_]hwmon_device_register_with_groups

   - ftsteutates: Support for fanX_fault and other cleanup

   - ltc2945: Support for setting shunt resistor and other cleanup/fixes

   - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify
     platform device handling

  ... and various other minor cleanups and fixes"

* tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits)
  hwmon: Deprecate [devm_]hwmon_device_register_with_groups
  hwmon: (mlxreg-fan) Return zero speed for broken fan
  hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource()
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate
  hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3
  hwmon: (iio_hwmon) use dev_err_probe
  hwmon: intel-m10-bmc-hwmon: Add N6000 sensors
  Docs/hwmon/index: Add missing SPDX License Identifier
  hwmon: (it87) Updated documentation for recent updates to it87
  hwmon: (it87) Add new chipset IT87952E
  hwmon: (it87) Allow multiple chip IDs for force_id
  hwmon: (it87) Add chip_id in some info message
  hwmon: (it87) List full chip model name
  hwmon: (it87) Disable configuration exit for certain chips
  hwmon: (it87) Allow disabling exiting of configuration mode
  Documentation: hwmon: correct spelling
  hwmon: (pmbus/max16601) Add support for MAX16600
  hwmon: (ltc2945) Allow setting shunt resistor
  hwmon: (ltc2945) Handle error case in ltc2945_value_store
  hwmon: (ltc2945) Add devicetree match table
  ...

Pull HID updates from Benjamin Tissoires:

 - HID-BPF infrastructure: this allows to start using HID-BPF. Note that
   the mechanism to ship HID-BPF program through the kernel tree is
   still not implemented yet (but is planned).

   This should be a no-op for 99% of users. Also we are gaining
   kselftests for the HID tree (Benjamin Tissoires)

 - Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin
   Tissoires)

 - Constify hid_ll_driver (Thomas Weißschuh)

 - Allow more custom IIO sensors through HID (Philipp Jungkamp)

 - Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien
   Nocera)

 - Some new device support: Steam Deck (Vicki Pfau), UClogic (José
   Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman),
   EVision keyboards (Philippe Valembois)

 - other assorted code cleanups and fixes

* tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits)
  HID: mcp-2221: prevent UAF in delayed work
  hid: bigben_probe(): validate report count
  HID: asus: use spinlock to safely schedule workers
  HID: asus: use spinlock to protect concurrent accesses
  HID: bigben: use spinlock to safely schedule workers
  HID: bigben_worker() remove unneeded check on report_field
  HID: bigben: use spinlock to protect concurrent accesses
  HID: logitech-hidpp: Add myself to authors
  HID: logitech-hidpp: Retry commands when device is busy
  HID: logitech-hidpp: Add more debug statements
  HID: Add support for Logitech G923 Xbox Edition steering wheel
  HID: logitech-hidpp: Add Signature M650
  HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk
  HID: logitech-hidpp: Don't restart communication if not necessary
  HID: logitech-hidpp: Add constants for HID++ 2.0 error codes
  Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"
  HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
  HID: i2c-hid: goodix: Add mainboard-vddio-supply
  dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply
  HID: i2c-hid: goodix: Stop tying the reset line to the regulator
  ...

Pull pin control updates from Linus Walleij:
 "Nothing special, notably a lot of new Qualcomm hardware is supported,
  a RISC-V reference SoC and then some cleanups both in code and device
  tree bindings.

  Core changes:

   - Add PINCTRL_PINFUNCTION() macro and use it in several drivers

  New drivers:

   - New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
     pin controllers. (RISC-V.)

   - New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller

   - New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
     controllers

   - New subdriver for the Qualcomm SA8775P SoC pin controller

   - New subdriver for the Qualcomm IPQ5332 SoC pin controller

   - New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
     control

   - New subdriver for the Mediatek MT7981 SoC pin controller

  Improvements:

   - Several cleanups and refactorings to the Intel drivers

   - Add 4KOhm bias support to the Intel driver

   - Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver

   - Support general purpose clocks in the Qualcomm MSM8226 SoC

   - Several conversions to use the new I2C .probe_new() call

   - Massive clean-up of the Qualcomm Device Tree YAML schemas

   - Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
     driver"

* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
  pinctrl: qcom: Add support for i2c specific pull feature
  pinctrl: starfive: Add StarFive JH7110 aon controller driver
  pinctrl: starfive: Add StarFive JH7110 sys controller driver
  dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
  dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
  pinctrl: add mt7981 pinctrl driver
  dt-bindings: pinctrl: add bindings for MT7981 SoC
  dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
  pinctrl: qcom: Introduce IPQ5332 TLMM driver
  dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
  dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
  pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
  dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
  pinctrl: at91: use devm_kasprintf() to avoid potential leaks
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
  dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
  dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
  dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
  dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
  dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
  ...

Pull gpio updates from Bartosz Golaszewski:
 "A rather small update, there are no new drivers, just improvements and
  refactoring in existing ones.

  Thanks to migrating of several drivers to using generalized APIs and
  dropping of OF interfaces in favor of using software nodes we're
  actually removing more code than we're adding.

  Core GPIOLIB:
   - drop several OF interfaces after moving a significant part of the
     code to using software nodes
   - remove more interfaces referring to the global GPIO numberspace
     that we're getting rid of
   - improvements in the gpio-regmap library
   - add helper for GPIO device reference counting
   - remove unused APIs
   - minor tweaks like sorting headers alphabetically

  Extended support in existing drivers:
   - add support for Tegra 234 PMC to gpio-tegra186

  Driver improvements:
   - migrate the 104-dio/idi family of drivers to using the regmap-irq
     API
   - migrate gpio-i8255 and gpio-mm to the GPIO regmap API
   - clean-ups in gpio-pca953x
   - remove duplicate assignments of of_gpio_n_cells in gpio-davinci,
     gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x
   - improvements to gpio-pcf857x: implement get/set_multiple callbacks,
     use generic device properties instead of OF + minor tweaks
   - fix OF-related header includes and Kconfig dependencies in
     gpio-zevio
   - dynamically allocate the GPIO base in gpio-omap
   - use a dedicated printf specifier for printing fwnode info in
     gpio-sim
   - use dev_name() for the GPIO chip label in gpio-vf610
   - other minor tweaks and fixes

  Documentation:
   - remove mentions of legacy API from comments in various places
   - convert the DT binding documents to YAML schema for Fujitsu
     MB86S7x, Unisoc GPIO and Unisoc EIC
   - document the Unisoc UMS512 controller in DT bindings"

* tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
  gpio: sim: Use %pfwP specifier instead of calling fwnode API directly
  gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping()
  gpiolib: of: Move enum of_gpio_flags to its only user
  gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
  gpio: zevio: Add missing header
  gpio: Get rid of gpio_to_chip()
  gpio: pcf857x: Drop unneeded explicit casting
  gpio: pcf857x: Make use of device properties
  gpio: pcf857x: Get rid of legacy platform data
  gpio: rockchip: Do not mention legacy API in the code
  gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
  gpio: zevio: Use proper headers and drop OF_GPIO dependency
  gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
  gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
  dt-bindings: gpio: Add compatible string for Unisoc UMS512
  dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
  dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml
  gpio: ge: Remove duplicate assignment of of_gpio_n_cells
  gpio: davinci: Remove duplicate assignment of of_gpio_n_cells
  gpio: omap: use dynamic allocation of base
  ...

Pull spi updates from Mark Brown:
 "This has been a fairly quiet release for SPI, though it is likely that
  the next release will have some big changes as there's some
  preparatory work for multiple chip select support gone in - the rest
  of the code is on the list but will need to be rebased onto -rc1.
  Otherwise there's a couple of new tunables for chip select timings,
  some new devices and smaller device specific updates and fixes.

   - Support for configuring the hold and minimum inactive times for
     chip selects.

   - Beginnings of support for supporting devices which have multiple
     chip selects on a single device.

   - Support for newer Broadcom HSSPI and Intel controllers, Silicon
     Labs EM3581 and SI3210"

* tag 'spi-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (67 commits)
  spi: dt-bindings: qcom,spi-qcom-qspi: document OPP and power-domains
  spi: spidev: drop the incorrect notice from Kconfig
  spi: bcm63xx-hsspi: fix error code in probe
  spi: bcmbca-hsspi: Fix error code in probe() function
  spi: synquacer: Fix timeout handling in synquacer_spi_transfer_one()
  spi: intel: Check number of chip selects after reading the descriptor
  spi: xilinx: add force_irq for QSPI mode
  spi: spi-st-ssc: convert to DT schema
  spi: Reorder fields in 'struct spi_transfer'
  spi: cadence-quadspi: use STIG mode for small reads
  spi: cadence-quadspi: setup ADDR Bits in cmd reads
  spi: cadence-quadspi: Add flag for direct mode writes
  spi: cadence-quadspi: Reset CMD_CTRL Reg on cmd r/w completion
  MAINTAINERS: Remove file reference for Broadcom Broadband SoC HS SPI driver entry
  spi: bcm63xx-hsspi: bcmbca-hsspi: fix _be16 type usage
  MAINTAINERS: Add entry for Broadcom Broadband SoC HS SPI drivers
  spi: bcmbca-hsspi: Add driver for newer HSSPI controller
  spi: bcm63xx-hsspi: Disable spi mem dual io read op support
  spi: spi-mem: Allow controller supporting mem_ops without exec_op
  spi: bcm63xx-hsspi: Add prepend mode support
  ...

Pull regulator updates from Mark Brown:
 "This has been a very quiet release for the regulator API: there's one
  new driver for the Maxim MAX20411, some DT schema conversions and some
  small tweaks and improvements but really nothing major at all"

* tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (22 commits)
  regulator: max597x: Align for simple_mfd_i2c driver
  regulator: max20411: Fix off-by-one for n_voltages setting
  regulator: max597x: Remove unused variable
  regulator: tps65219: use generic set_bypass()
  regulator: s5m8767: Bounds check id indexing into arrays
  regulator: max77802: Bounds check regulator id against opmode
  regulator: max20411: Convert to i2c's .probe_new()
  regulator: scmi: Allow for zero voltage domains
  regulator: max20411: Directly include bitfield.h
  regulator: Introduce Maxim MAX20411 Step-Down converter
  regulator: dt-bindings: Describe Maxim MAX20411
  regulator: dt-bindings: qcom-labibb: Allow regulator-common properties
  regulator: dt-bindings: fixed-regulator: allow gpios property
  regulator: tps65219: use IS_ERR() to detect an error pointer
  regulator: mcp16502: add enum MCP16502_REG_HPM description
  regulator: fixed-helper: use the correct function name in comment
  regulator: act8945a: fix non-kernel-doc comments
  dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema
  regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema
  regulator: dt-bindings: qcom,usb-vbus-regulator: change node name
  ...

Pull regmap updates from Mark Brown:
 "A quiet release for regmap: we've seen several cleanups, an update for
  a change in the MDIO APIs and one small fix"

* tag 'regmap-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Remove unused mask_invert flag
  regmap-irq: Remove unused type_invert flag
  regmap: Reorder fields in 'struct regmap_bus' to save some memory
  regmap: apply reg_base and reg_downshift for single register ops

Pull sound updates from Takashi Iwai:
 "The majority of works in this cycle are about ASoC spread over trees.
  Most of them are for new devices and cleanups / refactoring works, and
  not much significant changes are seen in the core side.

  Below are some highlights:

  ASoC:

   - Continued refactoring to move into common helper functions

   - Lots of DT schema conversons and stylistic nits

   - Continued work on building out the new SOF IPC4 scheme

   - Continued work for Intel AVS

   - New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
     SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
     Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1

  ALSA:

   - A few cleanups to make the remove callbacks to void returns

   - FireWire refactoring and enhancements

   - PCM kselftest enhancements"

* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
  ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
  ASoC: soc-ac97: Return correct error codes
  ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
  ASoC: cs35l45: Remove separate namespace for tables
  ASoC: cs35l45: Remove separate tables module
  ASoC: soc-ac97: Convert to agnostic GPIO API
  ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
  ALSA: hda: cs35l41: Enable Amp High Pass Filter
  ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
  ALSA: hda: cs35l41: Correct error condition handling
  ASoC: codecs: wcd934x: Use min macro for comparison and assignment
  ASoC: Intel: Skylake: Fix struct definition
  ASoC: tlv320adcx140: extend list of supported samplerates
  ASoC: imx-pcm-rpmsg: Remove unused variable
  SoC: rt5682s: Disable jack detection interrupt during suspend
  ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
  ASoC: SOF: Intel: Enable d0i3 work for ipc4
  ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
  ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
  ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
  ...

Commit 74e19ef0 ("uaccess: Add speculation barrier to
copy_from_user()") built fine on x86-64 and arm64, and that's the extent
of my local build testing.

It turns out those got the <linux/nospec.h> include incidentally through
other header files (<linux/kvm_host.h> in particular), but that was not
true of other architectures, resulting in build errors

  kernel/bpf/core.c: In function ‘___bpf_prog_run’:
  kernel/bpf/core.c:1913:3: error: implicit declaration of function ‘barrier_nospec’

so just make sure to explicitly include the proper <linux/nospec.h>
header file to make everybody see it.

Fixes: 74e19ef0 ("uaccess: Add speculation barrier to copy_from_user()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Initial support of HID-BPF (Benjamin Tissoires)

The history is a little long for this series, as it was intended to be
sent for v6.2. However some last minute issues forced us to postpone it
to v6.3.

Conflicts:
* drivers/hid/i2c-hid/Kconfig:
  commit bf7660da ("HID: stop drivers from selecting CONFIG_HID")
  conflicts with commit 2afac81d ("HID: fix I2C_HID not selected
  when I2C_HID_OF_ELAN is")
  the resolution is simple enough: just drop the "default" and "select"
  lines as the new commit from Arnd is doing

UClogic assorted fixes and new devices support (José Expósito)

Add Steam Deck support (Vicki Pfau)

- enforce DS4 controllers to use hid-playstation (Roderick Colenbrander)
- various hid-playstation gyro fixes (Roderick Colenbrander)

Allow to pass quirks from i2c-hid to hid-multitouch (Allen Ballway &
Dmitry Torokhov)

prevent UAF in delayed work (Benjamin Tissoires)

- HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera)
- add support of Logitech G923 Xbox Edition steering wheel (Walt Holman)

- dev_dbg cleanup (Thomas Weißschuh)
- cleanup i2c-hid-acpi (Andy Shevchenko)
- goodix: revert/fixes for an actual production device compared to the
  manufacturer sample (Douglas Anderson)

Allow more custom IIO sensors through HID (Philipp Jungkamp)

New hid-evision driver for EVision keyboards (Philippe Valembois)

UAF protection in work struct (Pietro Borrello)

UAF protection in work struct (Pietro Borrello)

- constify hid_ll_driver (Thomas Weißschuh)
- map standard Battery System Charging to upower (José Expósito)
- couple of assorted fixes and new handling of HID usages (Jingyuan
  Liang & Ronald Tschalär)

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

Pull crypto update from Herbert Xu:
 "API:
   - Use kmap_local instead of kmap_atomic
   - Change request callback to take void pointer
   - Print FIPS status in /proc/crypto (when enabled)

  Algorithms:
   - Add rfc4106/gcm support on arm64
   - Add ARIA AVX2/512 support on x86

  Drivers:
   - Add TRNG driver for StarFive SoC
   - Delete ux500/hash driver (subsumed by stm32/hash)
   - Add zlib support in qat
   - Add RSA support in aspeed"

* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
  crypto: x86/aria-avx - Do not use avx2 instructions
  crypto: aspeed - Fix modular aspeed-acry
  crypto: hisilicon/qm - fix coding style issues
  crypto: hisilicon/qm - update comments to match function
  crypto: hisilicon/qm - change function names
  crypto: hisilicon/qm - use min() instead of min_t()
  crypto: hisilicon/qm - remove some unused defines
  crypto: proc - Print fips status
  crypto: crypto4xx - Call dma_unmap_page when done
  crypto: octeontx2 - Fix objects shared between several modules
  crypto: nx - Fix sparse warnings
  crypto: ecc - Silence sparse warning
  tls: Pass rec instead of aead_req into tls_encrypt_done
  crypto: api - Remove completion function scaffolding
  tls: Remove completion function scaffolding
  tipc: Remove completion function scaffolding
  net: ipv6: Remove completion function scaffolding
  net: ipv4: Remove completion function scaffolding
  net: macsec: Remove completion function scaffolding
  dm: Remove completion function scaffolding
  ...

Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - AMD PMC: Improvements to aid s2idle debugging

 - Dell WMI-DDV: hwmon support

 - INT3472 camera sensor power-management: Improve privacy LED support

 - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
   Interface) support

 - Mellanox: SN5600 and Nvidia L1 switch support

 - Microsoft Surface Support: Various cleanups + code improvements

 - tools/intel-speed-select: Various improvements

 - Miscellaneous other cleanups / fixes

* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
  platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
  platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
  platform/x86: dell-ddv: Prefer asynchronous probing
  platform/x86: dell-ddv: Add hwmon support
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
  platform: mellanox: mlx-platform: Add mux selection register to regmap
  platform_data/mlxreg: Add field with mapped resource address
  platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
  platform: mellanox: Extend all systems with I2C notification callback
  platform: mellanox: Split logic in init and exit flow
  platform: mellanox: Split initialization procedure
  platform: mellanox: Introduce support of new Nvidia L1 switch
  platform: mellanox: Introduce support for next-generation 800GB/s switch
  platform: mellanox: Cosmetic changes - rename to more common name
  platform: mellanox: Change "reset_pwr_converter_fail" attribute
  platform: mellanox: Introduce support for rack manager switch
  MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
  x86/platform/uv: Make kobj_type structure constant
  platform/x86: think-lmi: Make kobj_type structure constant
  ...

Merge tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "New drivers:
   - cros_ec_uart for ChromeOS EC protocol over UART
   - cros_typec_vdm for USB PD Vendor Defined Message

  Improvements:
   - Preserve logs as much as possible when EC panics
   - Shutdown to refrain from potential HW damages when EC panics

  Fixes:
   - Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE
   - Fix a lockdep false positive

  Cleanups:
   - Use sysfs_emit*() instead of scnprintf()
   - Use asm instead of asm-generic for unaligned.h

  Misc:
   - Rename module name from cros_ec_typec to cros-ec-typec
   - Minor fixes"

* tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
  platform/chrome: cros_ec_typec: Fix spelling mistake
  platform/chrome: cros_typec_vdm: Add Attention support
  platform/chrome: cros_ec: Add VDM attention headers
  platform/chrome: cros_typec_vdm: Fix VDO copy
  platform/chrome: cros_ec_typec: allow deferred probe of switch handles
  platform/chrome: cros_ec_proto: remove big stub objects from stack
  platform/chrome: cros_ec_uart: fix negative type promoted to high
  platform/chrome: cros_ec: Use per-device lockdep key
  platform/chrome: fix kernel-doc warnings for cros_ec_command
  platform/chrome: fix kernel-doc warning for last_resume_result
  platform/chrome: fix kernel-doc warning for suspend_timeout_ms
  platform/chrome: fix kernel-doc warnings for panic notifier
  platform/chrome: cros_ec_lpc: initialize the buf variable
  platform/chrome: cros_ec: Fix panic notifier registration
  platform/chrome: cros_typec_switch: Check for retimer flag
  platform/chrome: cros_typec_switch: Use fwnode* prop check
  platform/chrome: cros_typec_vdm: Add VDM send support
  platform/chrome: cros_typec_vdm: Add VDM reply support
  platform/chrome: cros_ec_typec: Add initial VDM support
  platform/chrome: cros_ec_typec: Alter module name with hyphens
  ...

Pull xen updates from Juergen Gross:

 - help deprecate the /proc/xen files by making the related information
   available via sysfs

 - mark the Xen variants of play_dead "noreturn"

 - support a shared Xen platform interrupt

 - several small cleanups and fixes

* tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: sysfs: make kobj_type structure constant
  x86/Xen: drop leftover VM-assist uses
  xen: Replace one-element array with flexible-array member
  xen/grant-dma-iommu: Implement a dummy probe_device() callback
  xen/pvcalls-back: fix permanently masked event channel
  xen: Allow platform PCI interrupt to be shared
  x86/xen/time: prefer tsc as clocksource when it is invariant
  x86/xen: mark xen_pv_play_dead() as __noreturn
  x86/xen: don't let xen_pv_play_dead() return
  drivers/xen/hypervisor: Expose Xen SIF flags to userspace

Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - allow Linux to run as the nested root partition for Microsoft
   Hypervisor (Jinank Jain and Nuno Das Neves)

 - clean up the return type of callback functions (Dawei Li)

* tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Fix hv_get/set_register for nested bringup
  Drivers: hv: Make remove callback of hyperv driver void returned
  Drivers: hv: Enable vmbus driver for nested root partition
  x86/hyperv: Add an interface to do nested hypercalls
  Drivers: hv: Setup synic registers in case of nested root partition
  x86/hyperv: Add support for detecting nested hypervisor

Pull arm64 updates from Catalin Marinas:

 - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
   architectural register (ZT0, for the look-up table feature) that
   Linux needs to save/restore

 - Include TPIDR2 in the signal context and add the corresponding
   kselftests

 - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
   support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
   (ARM CMN) at probe time

 - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64

 - Permit EFI boot with MMU and caches on. Instead of cleaning the
   entire loaded kernel image to the PoC and disabling the MMU and
   caches before branching to the kernel bare metal entry point, leave
   the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
   all of system RAM to populate the initial page tables

 - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
   kernel (the arm32 kernel only defines the values)

 - Harden the arm64 shadow call stack pointer handling: stash the shadow
   stack pointer in the task struct on interrupt, load it directly from
   this structure

 - Signal handling cleanups to remove redundant validation of size
   information and avoid reading the same data from userspace twice

 - Refactor the hwcap macros to make use of the automatically generated
   ID registers. It should make new hwcaps writing less error prone

 - Further arm64 sysreg conversion and some fixes

 - arm64 kselftest fixes and improvements

 - Pointer authentication cleanups: don't sign leaf functions, unify
   asm-arch manipulation

 - Pseudo-NMI code generation optimisations

 - Minor fixes for SME and TPIDR2 handling

 - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
   replace strtobool() to kstrtobool() in the cpufeature.c code, apply
   dynamic shadow call stack in two passes, intercept pfn changes in
   set_pte_at() without the required break-before-make sequence, attempt
   to dump all instructions on unhandled kernel faults

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
  arm64: fix .idmap.text assertion for large kernels
  kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
  kselftest/arm64: Copy whole EXTRA context
  arm64: kprobes: Drop ID map text from kprobes blacklist
  perf: arm_spe: Print the version of SPE detected
  perf: arm_spe: Add support for SPEv1.2 inverted event filtering
  perf: Add perf_event_attr::config3
  arm64/sme: Fix __finalise_el2 SMEver check
  drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
  arm64/signal: Only read new data when parsing the ZT context
  arm64/signal: Only read new data when parsing the ZA context
  arm64/signal: Only read new data when parsing the SVE context
  arm64/signal: Avoid rereading context frame sizes
  arm64/signal: Make interface for restore_fpsimd_context() consistent
  arm64/signal: Remove redundant size validation from parse_user_sigframe()
  arm64/signal: Don't redundantly verify FPSIMD magic
  arm64/cpufeature: Use helper macros to specify hwcaps
  arm64/cpufeature: Always use symbolic name for feature value in hwcaps
  arm64/sysreg: Initial unsigned annotations for ID registers
  arm64/sysreg: Initial annotation of signed ID registers
  ...

Pull ARM udpates from Russell King:

 - Improve Kconfig help text for Cortex A8 and Cortex A9 errata

 - Kconfig spelling and grammar fixes

 - Allow kernel-mode VFP/Neon in softirq context

 - Use Neon in softirq context

 - Implement AES-CTR/GHASH version of GCM

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer
  ARM: 9288/1: Kconfigs: fix spelling & grammar
  ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM
  ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile
  ARM: 9283/1: permit non-nested kernel mode NEON in softirq context
  ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled
  ARM: 9281/1: improve Cortex A8/A9 errata help text

Pull m68k updates from Geert Uytterhoeven:

 - Add seccomp support

 - defconfig updates

 - Miscellaneous fixes and improvements

* tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: /proc/hardware should depend on PROC_FS
  selftests/seccomp: Add m68k support
  m68k: Add kernel seccomp support
  m68k: Check syscall_trace_enter() return code
  m68k: defconfig: Update defconfigs for v6.2-rc3
  m68k: q40: Do not initialise statics to 0