1. 22 Nov, 2018 8 commits
    • Michael Straube's avatar
      staging: rtl8188eu: rename BlinkHandler to avoid CamelCase · 87631cf2
      Michael Straube authored
      Rename the function BlinkHandler to avoid CamelCase.
      BlinkHandler -> blink_handler
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      87631cf2
    • Michael Straube's avatar
      staging: rtl8188eu: rename SwLedOff to avoid CamelCase · dfd2fb58
      Michael Straube authored
      Rename the function SwLedOff to avoid CamelCase.
      SwLedOff -> sw_led_off
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      dfd2fb58
    • Michael Straube's avatar
      staging: rtl8188eu: rename SwLedOn to avoid CamelCase · 01b3ce53
      Michael Straube authored
      Rename the function SwLedOn to avoid CamelCase.
      SwLedOn -> sw_led_on
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      01b3ce53
    • Michael Straube's avatar
      staging: rtl8188eu: rename LedCfg to avoid CamelCase · 3c739793
      Michael Straube authored
      Rename the variable LedCfg to avoid CamleCase.
      LedCfg -> led_cfg
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3c739793
    • Michael Straube's avatar
      staging: rtl8188eu: add spaces around '&' in rtl8188eu_led.c · cfe0610f
      Michael Straube authored
      Add spaces around '&' to follow kernel coding style.
      Reported by checkpatch.
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cfe0610f
    • Michael Straube's avatar
      staging: rtl8188eu: cleanup comments in rtl8188eu_led.c · 5718ba5e
      Michael Straube authored
      Remove comments in rtl8188eu_led.c. The function names are well
      descriptive.
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5718ba5e
    • Michael Straube's avatar
      staging: rtl8188eu: remove unnecessary parentheses in rtl8188eu_led.c · 6a03492a
      Michael Straube authored
      Remove unnecessary parentheses reported by checkpatch.
      Signed-off-by: default avatarMichael Straube <straube.linux@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6a03492a
    • Greg Kroah-Hartman's avatar
      Merge tag 'iio-for-4.21a' of... · 7c0bc65c
      Greg Kroah-Hartman authored
      Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
      
      Jonathan writes:
      
      First set of new device support, features and cleanups for IIO in the 4.21 cycle
      
      Along with the headline feature of 5 new drivers, we have the
      substantial addition of auxilliary sensor support on the lsm6sdx
      parts for ST.  There has also been a good set of staging cleanup
      in this period with more underway.
      
      An ever increasing number of devices supported with just a new
      ID which is a good sign that at least some manufacturers are
      continuing to stabilise their interfaces.
      
      New device support,
      * ad7124
        - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
          with the inevitable DT binding.
      * ad7949
        - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
      * rm3100
        - New driver supporting PNIs RM3100 magnometer with bindings and
          vendor prefix.
      * ti-dac7311
        - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
          DT bindings.
      * vcnl5035
        - New driver supporting the light sensor part of the VCNL4035, with
          DT bindings
      
      Features,
      * bindings
        - Add a generic ADC channel binding as we keep reinventing this
          wheel.
      * adc128s052
        - Add IDs for additional pin compatible parts.
        - Add APCI ID seen on E3940 UP squared boards.
      * ad_sigma_delta
        - Allow for custom data register overiding default.
      * kxcjk1013
        - Add KIOX0009 ACPI ID as seen on the Acer One 10.
      * lsm6dsx
        - Rework leading to...
        - External sensor support using the built in I2C master.
        - Initial support for a slave lis2mdl magnetometer.
      * meson-saradc
        - Add temperature sensor support and bindings.
      * st_magn
        - New ID for lsm9dsl_magn with bindings
        - New ID for lis3de accelerometer
      * tpl0102
        - Add supprot for IIO_AVAIL_RANGE to report the range available
          from this device to userspace and in kernel users.
      
      Cleanups and minor fixes
      * tools
        - Allow outside specification of CFLAGS
      * ad2s90
        - Handle and spi_read error.
        - Handle spi_setup failure
        - Drop a pointless assignment.
        - Prevent a potentail race by moving device registration to after
          all other setup.
        - Add missing scale attribute.
        - Add a sanity check on channel type before trying to read it.
      * ad2s1210
        - Move to modern gpio descriptors.
        - Drop a gpioin flag which made no sense as far as we can tell.
        - Add dt table (bindings doc to follow when this is ready for
          moving out of staging).
      * ad5933
        - Drop camel-case naming of ext_clk_hz.
        - White space fixes.
      * ad7150
        - Local variable to shorten overly long line.
        - Alignment and line break fixes.
      * ad7280a
        - Handle an error path that was previously ignored.
        - Use crc8.h to build the crc table replacing custom code.
        - Avoid unecessary cast.
        - Power down the device if an error happens in probe
        - Use devm routines to simplify probe and remove.
      * ad7606
        - Alignment fixes.
      * ad7780
        - This worked as long as by coincidence an uninitialized value
          was 0.  Lets not rely on that.
        - Ensure gain update is only used with the ad778x chips that
          actually support it.
        - Tidy up pattern mask generation.
        - Read regulator when scale is requested (which should be infrequent)
          as it might have changed from initialization.
      * ad7816
        - Move to modern gpio descriptors
        - Don't use a busy_pin for ad7818 as there isn't one.
        - Ensure RD/WR and CONVST pins are outputs (previously they
          were brought up as inputs which doesn't seem to make any sense)
        - DT id table.
      * adc128s052
        - SPDX
      * adt7316
        - Alignment fix.
        - Fix data reading.  When using I2C the driver never actually
          used the value read.  This has been broken a very long time
          hence no rush to fix it now + the driver is undergoing a lot
          of cleanup.
        - Sanity check that the i2c read didn't fail to actually read
          anything.
      * dpot-dac
        - Mark a switch full through with slightly different text so that
          gcc doesn't warn on it.
      * gyro-adc
        - Fix a wrong file in the MAINTAINERS entry and add binding doc to the
          listed files.
      * ina2xx
        - Add some early returns to clarify error paths in switch.
      * lsm6dsx
        - MAINTAINERS entry.
      * max11100
        - SPDX
      * max9611
        - SPDX
      * mcp4131
        - use of_device_get_match_data in preference to spi_get_device_id
          approach.
      * rcar-adc
        - SPDX
      * sc27xx
        - Add ADC conversion timeout support to avoid possible fault.
      * ssp_sensors
        - Don't free managed resources manually.
      * st-magn
        - Add a comment to avoid future confusion over when to use -magn
          postfix (on multi chip in package parts)
        - Add BDU register for LIS3MDL where it seems to have been missed.
      * st-sensors
        - Minor spelling, grammar etc fixes.
      * tpl0102
        - Use a pointer rather than an index of an array to improve conciseness.
      
      * tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits)
        Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
        Staging: iio: adt7316: Fix i2c data reading, set the data field
        dt-bindings: iio: adc: Add docs for ad7124
        iio: adc: Add ad7124 support
        dt-bindings: iio: adc: Add common ADCs properties to a separate file
        iio: ad_sigma_delta: Allow to provide custom data register address
        staging: iio: ad7816: Add device tree table.
        iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
        iio: potentiometer: mcp4131: use of_device_get_match_data()
        staging: iio: adc: ad7280a: use devm_* APIs
        staging: iio: adc: ad7280a: power down the device on error in probe
        dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
        iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
        iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
        iio: imu: st_lsm6dsx: add i2c embedded controller support
        iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
        iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
        iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
        iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
        iio: imu: st_lsm6dsx: introduce locked read/write utility routines
        ...
      7c0bc65c
  2. 20 Nov, 2018 14 commits
  3. 17 Nov, 2018 6 commits
  4. 16 Nov, 2018 12 commits