Pull MTD fixes from Brian Norris:

 - MAINTAINERS updates for brcmnand driver

 - Fix reboot hangs seen when multiple NAND flash chips are registered
   with the same controller

 - Fix build issues on jz4740 NAND driver; the error was introduced in
   4.3, so I guess nobody really cared, but we might as well fix it

* tag 'for-linus-20151120' of git://git.infradead.org/linux-mtd:
  MAINTAINERS: brcmnand: Add co-maintainer for Broadcom SoCs
  MAINTAINERS: brcmnand: Add Broadcom internal mailing-list
  mtd: nand: fix shutdown/reboot for multi-chip systems
  mtd: jz4740_nand: fix build on jz4740 after removing gpio.h

Pull i2c fixes from Wolfram Sang:
 "A few bugfixes and one PCI ID addition from I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: add Intel Lewisburg device IDs
  i2c: fix wakeup irq parsing
  i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer()
  i2c: Revert "i2c: xiic: Do not reset controller before every transfer"
  i2c: imx: fix a compiling error

Pull documentation fix from Jon Corbet:
 "A single fix from Mauro for a 4.4 regression that would cause the docs
  build to fail on systems with ancient Perl installations"

* tag '4.4-fix' of git://git.lwn.net/linux:
  kernel-doc: Make it compatible with Perl versions below 5.12 again

Pull libnvdimm fixes from Dan Williams:

 - A collection of crash and deadlock fixes for DAX that are also tagged
   for -stable.  We will look to re-enable DAX pmd mappings in 4.5, but
   for now 4.4 and -stable should disable it by default.

 - A fixup to ext2 and ext4 to mirror the same warning emitted by XFS
   when mounting with "-o dax"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  block: protect rw_page against device teardown
  mm, dax: fix DAX deadlocks (COW fault)
  dax: disable pmd mappings
  ext2, ext4: warn when mounting with dax enabled

Pull more power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups (ACPI core, PM core, cpufreq, ACPI
  EC driver, device properties) including three reverts of recent
  intel_pstate driver commits due to a regression introduced by one of
  them plus support for Atom Airmont cores in intel_pstate (which really
  boils down to adding new frequency tables for Airmont) and additional
  turbostat updates.

  Specifics:

   - Revert three recent intel_pstate driver commits one of which
     introduced a regression and the remaining two depend on the
     problematic one (Rafael Wysocki).

   - Fix breakage related to the recently introduced ACPI _CCA object
     support in the PCI DMA setup code (Suravee Suthikulpanit).

   - Fix up the recently introduced ACPI CPPC support to only use the
     hardware-reduced version of the PCCT structure as the only
     architecture to support it (ARM64) will only use hardware-reduced
     ACPI anyway (Ashwin Chaugule).

   - Fix a cpufreq mediatek driver build problem (Arnd Bergmann).

   - Fix the SMBus transaction handling implementation in the ACPI core
     to avoid re-entrant calls to wait_event_timeout() which makes
     intermittent boot stalls related to the Smart Battery Subsystem
     initialization go away and revert a workaround of another problem
     with the same underlying root cause (Chris Bainbridge).

   - Fix the generic wakeup interrupts framework to avoid using invalid
     IRQ numbers (Dmitry Torokhov).

   - Remove a redundant check from the ACPI EC driver (Markus Elfring).

   - Modify the intel_pstate driver so it can support more Atom flavors
     than just one (Baytrail) and add support for Atom Airmont cores
     (which require new freqnency tables) to it (Philippe Longepe).

   - Clean up MSR-related symbols in turbostat (Len Brown)"

* tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: Fix OF logic in pci_dma_configure()
  Revert "Documentation: kernel_parameters for Intel P state driver"
  cpufreq: mediatek: fix build error
  cpufreq: intel_pstate: Add separate support for Airmont cores
  cpufreq: intel_pstate: Replace BYT with ATOM
  Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
  Revert "cpufreq: intel_pstate: Avoid calculation for max/min"
  ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()
  Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"
  ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code
  PM / wakeirq: check that wake IRQ is valid before accepting it
  ACPI / CPPC: Use h/w reduced version of the PCCT structure
  x86: remove unused definition of MSR_NHM_PLATFORM_INFO
  tools/power turbostat: use new name for MSR_PLATFORM_INFO

Pull powerpc fixlet from Michael Ellerman:
 "Wire up sys_mlock2()"

* tag 'powerpc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Wire up sys_mlock2()

Adding Intel codename Lewisburg platform device IDs for SMBus.
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

This patch fixes obvious copy-past error in wake up irq parsing
code which leads to the fact that dev_pm_set_wake_irq() will
be called with wrong IRQ number when "wakeup" IRQ is not
defined in DT.

Fixes: 3fffd128 ("i2c: allow specifying separate wakeup interrupt in device tree")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: <stable@vger.kernel.org> # v4.3

Prior to commit e6c9a037 ("i2c: xiic: Remove the disabling of
interrupts") IRQs where disabled when the initial __xiic_start_xfer() was
called. After the commit the interrupt is enabled while the function is
running, this means it is possible for the interrupt to be triggered while
the function is still running. When this happens the internal data
structures get corrupted and undefined behavior can occur like the
following crash:

	Internal error: Oops: 17 [#1] PREEMPT SMP ARM
	Modules linked in:
	CPU: 0 PID: 2040 Comm: i2cdetect Not tainted 4.0.0-02856-g047a308 #10956
	Hardware name: Xilinx Zynq Platform
	task: ee0c9500 ti: e99a2000 task.ti: e99a2000
	PC is at __xiic_start_xfer+0x6c4/0x7c8
	LR is at __xiic_start_xfer+0x690/0x7c8
	pc : [<c02bbffc>]    lr : [<c02bbfc8>]    psr: 800f0013
	sp : e99a3da8  ip : 00000000  fp : 00000000
	r10: 00000001  r9 : 600f0013  r8 : f0180000
	r7 : f0180000  r6 : c064e444  r5 : 00000017  r4 : ee031010
	r3 : 00000000  r2 : 00000000  r1 : 600f0013  r0 : 0000000f
	Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
	Control: 18c5387d  Table: 29a5404a  DAC: 00000015
	Process i2cdetect (pid: 2040, stack limit = 0xe99a2210)
	Stack: (0xe99a3da8 to 0xe99a4000)
	3da0:                   ee031010 00000000 00000001 ee031020 ee031224 c02bc5ec
	3dc0: ee34c604 00000000 ee0c9500 e99a3dcc e99a3dd0 e99a3dd0 e99a3dd8 c069f0e8
	3de0: 00000000 ee031020 c064e100 ffff90bb e99a3e48 c02b6590 ee031020 00000001
	3e00: e99a3e48 ee031020 00000000 e99a3e63 00000001 c02b6ec4 00000000 00000000
	3e20: 00000000 c02b7320 e99a3ef0 00000000 00000000 e99e3df0 00000000 00000000
	3e40: 00000103 2814575f 0000003e c00a0000 e99a3e85 0001003e ee0c0000 e99a3e63
	3e60: eefd3578 c064e61c ee0c9500 c0041e04 0000056c e9a56db8 00006e5a b6f5c000
	3e80: ee0c9548 eefd0040 00000001 eefd3540 ee0c9500 eefd39a0 c064b540 ee0c9500
	3ea0: 00000000 ee92b000 00000000 bef4862c ee34c600 e99ecdc0 00000720 00000003
	3ec0: e99a2000 00000000 00000000 c02b8b30 00000000 00000000 00000000 e99a3f24
	3ee0: b6e80000 00000000 00000000 c04257e8 00000000 e99a3f24 c02b8f08 00000703
	3f00: 00000003 c02116bc ee935300 00000000 bef4862c ee34c600 e99ecdc0 c02b91f0
	3f20: e99ecdc0 00000720 bef4862c eeb725f8 e99ecdc0 c00c9e2c 00000003 00000003
	3f40: ee248dc0 00000000 ee248dc8 00000002 eeb7c1a8 00000000 00000000 c00bb360
	3f60: 00000000 00000000 00000003 ee248dc0 bef4862c e99ecdc0 e99ecdc0 00000720
	3f80: 00000003 e99a2000 00000000 c00c9f68 00000000 00000000 b6f22000 00000036
	3fa0: c000dfa4 c000de20 00000000 00000000 00000003 00000720 bef4862c bef4862c
	3fc0: 00000000 00000000 b6f22000 00000036 00000000 00000000 b6f60000 00000000
	3fe0: 00013040 bef48614 00008cab b6ecdbe6 400f0030 00000003 2f7fd821 2f7fdc21
	[<c02bbffc>] (__xiic_start_xfer) from [<c02bc5ec>] (xiic_xfer+0x94/0x168)
	[<c02bc5ec>] (xiic_xfer) from [<c02b6590>] (__i2c_transfer+0x4c/0x7c)
	[<c02b6590>] (__i2c_transfer) from [<c02b6ec4>] (i2c_transfer+0x9c/0xc4)
	[<c02b6ec4>] (i2c_transfer) from [<c02b7320>] (i2c_smbus_xfer+0x3a0/0x4ec)
	[<c02b7320>] (i2c_smbus_xfer) from [<c02b8b30>] (i2cdev_ioctl_smbus+0xb0/0x214)
	[<c02b8b30>] (i2cdev_ioctl_smbus) from [<c02b91f0>] (i2cdev_ioctl+0xa0/0x1d4)
	[<c02b91f0>] (i2cdev_ioctl) from [<c00c9e2c>] (do_vfs_ioctl+0x4b0/0x5b8)
	[<c00c9e2c>] (do_vfs_ioctl) from [<c00c9f68>] (SyS_ioctl+0x34/0x5c)
	[<c00c9f68>] (SyS_ioctl) from [<c000de20>] (ret_fast_syscall+0x0/0x34)
	Code: e283300c e5843210 eafffe64 e5943210 (e1d320b4)

The issue can easily be reproduced by performing I2C access under high
system load or IO load.

To fix the issue protect the invocation to __xiic_start_xfer() form
xiic_start_xfer() with the same lock that is used to protect the interrupt
handler.

Fixes: e6c9a037 ("i2c: xiic: Remove the disabling of interrupts")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Commit d701667b ("i2c: xiic: Do not reset controller before every
transfer") removed the reinitialization of the controller before the start
of each transfer. Apparently this change is not safe to make and the commit
results in random I2C bus failures.

An easy way to trigger the issue is to run i2cdetect.

Without the patch applied:
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
	 00:          -- -- -- -- -- -- -- -- -- -- -- -- --
	 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 30: -- -- -- -- -- -- -- -- UU UU -- UU 3c -- -- UU
	 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 70: -- -- -- -- -- -- -- --

With the patch applied every other or so invocation:
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
	 00:          03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
	 10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
	 20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
	 30: -- -- -- -- -- -- -- -- UU UU -- UU 3c -- -- UU
	 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
	 70: -- -- -- -- -- -- -- --

So revert the commit for now.

Fixes: d701667b ("i2c: xiic: Do not reset controller before every transfer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-imx.c:978:2: error: implicit declaration of
function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration]
  pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio);
  ^
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull dmaengine fixes from Vinod Koul:
 "This has odd fixes spreadout drivers, not major here

   - usbdmac fixes for pm
   - edma build and logic fixes
   - build warn fixes for few drivers"

* tag 'dmaengine-fix-4.4-rc2' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: at_hdmac: use %pad format string for dma_addr_t
  dmaengine: at_xdmac: use %pad format string for dma_addr_t
  dmaengine: imx-sdma: remove __init annotation on sdma_event_remap
  dmaengine: edma: predecence bug in GET_NUM_QDMACH()
  dmaengine: edma: fix build without CONFIG_OF
  dmaengine: of_dma: Correct return code for of_dma_request_slave_channel in case !CONFIG_OF
  dmaengine: sh: usb-dmac: Fix pm_runtime_{enable,disable}() imbalance
  dmaengine: sh: usb-dmac: Fix crash on runtime suspend

Pull drm fixes from Dave Airlie:
 "A varied bunch of fixes, the radeon pull is probably a bit larger than
  I'd like, but it contains 2 weeks of stuff, and the Fiji fixes are a
  bit large, but they are Fiji specific.

  Otherwise:

   - mgag200: One cursor regression oops fix.
   - vc4: A few small fixes and cleanups.
   - core: Atomic fixes and Atomic helper fixes
   - i915: Revert for the backlight regression along with a bunch of
     fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (58 commits)
  drm/atomic-helper: Check encoder/crtc constraints
  Revert "drm/i915: skip modeset if compatible for everyone."
  drm/mgag200: fix kernel hang in cursor code.
  drm/amdgpu: reserve/unreserve objects out of map/unmap operations
  drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_bo
  drm/amdgpu: add lock for interval tree in vm
  drm/amdgpu: keep the owner for VMIDs
  drm/amdgpu: move VM manager clean into the VM code again
  drm/amdgpu: cleanup VM coding style
  drm/amdgpu: remove unused VM manager field
  drm/amdgpu: cleanup scheduler command submission
  drm/amdgpu: fix typo in firmware name
  drm/i915: Consider SPLL as another shared pll, v2.
  drm/i915: Fix gpu frequency change tracing
  drm/vc4: Make sure that planes aren't scaled.
  drm/vc4: Fix some failure to track __iomem decorations on pointers.
  drm/vc4: checking for NULL instead of IS_ERR
  drm/vc4: fix itnull.cocci warnings
  drm/vc4: fix platform_no_drv_owner.cocci warnings
  drm/vc4: vc4_plane_duplicate_state() can be static
  ...

Pull IPMI updates from Corey Minyard:
 "Some fixes for small IPMI problems.

  The most significant is that the driver wasn't starting the timer for
  some messages, which would result in problems if that message failed
  for some reason.

  The others are small optimizations or making things a little neater"

* tag 'for-linus-4.4' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi watchdog : add panic_wdt_timeout parameter
  char: ipmi: Move MODULE_DEVICE_TABLE() to follow struct
  ipmi: Stop the timer immediately if idle
  ipmi: Start the timer and thread on internal msgs

Merge tag 'renesas-sh-drivers-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH driver fixlet from Simon Horman:
 "I am sending this change after v4.4-rc1 has been released as it
  depends on SoC changes which are present in that rc:

   = Remove now unnecessary reference to CONFIG_ARCH_SHMOBILE_MULTI"

* tag 'renesas-sh-drivers-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI

* acpi-smbus:
  Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"
  ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code

* acpi-ec:
  ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()

* acpi-pci:
  PCI: Fix OF logic in pci_dma_configure()

* pm-sleep:
  PM / wakeirq: check that wake IRQ is valid before accepting it

* pm-cpufreq:
  Revert "Documentation: kernel_parameters for Intel P state driver"
  cpufreq: mediatek: fix build error
  cpufreq: intel_pstate: Add separate support for Airmont cores
  cpufreq: intel_pstate: Replace BYT with ATOM
  Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
  Revert "cpufreq: intel_pstate: Avoid calculation for max/min"

* acpi-cppc:
  ACPI / CPPC: Use h/w reduced version of the PCCT structure

This patch fixes a bug introduced by previous commit,
which incorrectly checkes the of_node of the end-point device.
Instead, it should check the of_node of the host bridge.

Fixes: 50230713 ("PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

i915 fixes for 4.4, including the revert for the backlight regression
Olof reported. Otherwise fixes all around.

* tag 'drm-intel-fixes-2015-11-19' of git://anongit.freedesktop.org/drm-intel:
  Revert "drm/i915: skip modeset if compatible for everyone."
  drm/i915: Consider SPLL as another shared pll, v2.
  drm/i915: Fix gpu frequency change tracing
  drm/i915: Don't clobber the addfb2 ioctl params
  drm/i915: Clear intel_crtc->atomic before updating it.
  drm/i915: get runtime PM reference around GEM set_caching IOCTL
  drm/i915: Fix GT frequency rounding
  drm/i915: quirk backlight present on Macbook 4, 1
  drm/i915: Fix crtc_y assignment in intel_find_initial_plane_obj()

Here are some drm core fixes for v4.4 that I've picked up. Atomic fixes
from Maarten, and atomic helper fixes from Ville and Daniel.

Admittedly the topmost commit didn't sit in our tree for very long, but
does come with reviews and testing from trustworthy people.

* tag 'topic/drm-fixes-2015-11-19' of git://anongit.freedesktop.org/drm-intel:
  drm/atomic-helper: Check encoder/crtc constraints
  drm: Fix primary plane size for stereo doubled modes for legacy setcrtc
  drm/core: Fix old_fb handling in pan_display_atomic.
  drm/core: Fix old_fb handling in restore_fbdev_mode_atomic.
  drm/atomic: add a drm_atomic_clean_old_fb helper.
  drm/core: Fix old_fb handling in drm_mode_atomic_ioctl.
  drm/core: Set legacy_cursor_update in drm_atomic_helper_disable_plane.

Fix use after free crashes like the following:

 general protection fault: 0000 [#1] SMP
 Call Trace:
  [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem]
  [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem]
  [<ffffffff8128fd90>] bdev_read_page+0x50/0x60
  [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50
  [<ffffffff81297657>] mpage_readpages+0x107/0x170
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20
  [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310
  [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310
  [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0
  [<ffffffff811c76f6>] filemap_fault+0x396/0x530
  [<ffffffff811f816e>] __do_fault+0x4e/0xf0
  [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
[willy: symmetry fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Pull arm64 fixes from Catalin Marinas:

 - Fix size alignment in __iommu_{alloc,free}_attrs

 - Kernel memory mapping fix with CONFIG_DEBUG_RODATA for page sizes
   other than 4KB and a fix of the mark_rodata_ro permissions

 - dma_get_ops() simplification and behaviour alignment between DT and
   ACPI

 - function_graph trace fix for cpu_suspend() (CPUs returning from deep
   sleep via a different path and confusing the tracer)

 - Use of non-global mappings for UEFI run-time services to avoid a
   (potentially theoretical) TLB conflict

 - Crypto priority reduction of core AES cipher (the accelerated
   asynchronous implementation is preferred when available)

 - Reverting an old commit that removed BogoMIPS from /proc/cpuinfo on
   arm64.  Apparently, we had it for a relatively short time and libvirt
   started checking for its presence

 - Compiler warnings fixed (ptrace.h inclusion from compat.h,
   smp_load_acquire with const argument)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: restore bogomips information in /proc/cpuinfo
  arm64: barriers: fix smp_load_acquire to work with const arguments
  arm64: Fix R/O permissions in mark_rodata_ro
  arm64: crypto: reduce priority of core AES cipher
  arm64: use non-global mappings for UEFI runtime regions
  arm64: kernel: pause/unpause function graph tracer in cpu_suspend()
  arm64: do not include ptrace.h from compat.h
  arm64: simplify dma_get_ops
  arm64: mm: use correct mapping granularity under DEBUG_RODATA
  arm64/dma-mapping: Fix sizes in __iommu_{alloc,free}_attrs

Pull livepatching fix from Jiri Kosina:
 "A fix for module handling in case kASLR has been enabled, from Zhou
  Chengming"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: x86: fix relocation computation with kASLR

Pull HID fixes from Jiri Kosina:
 "Two functional fixes for wacom HID driver from Ping Cheng and Jiri
  Kosina"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: fixup quirks setup for WACOM_DEVICETYPE_PAD
  HID: wacom: Add outbounding area for DTU1141

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.4 rc2.  It's based on a commit
  prior rc1 as I wanted to get them a bit more tested in next before
  sending you the pull request.

  MMC core:
   - Improve reliability when selecting HS200 mode
   - Improve reliability when selecting HS400 mode
   - mmc: remove bondage between REQ_META and reliable write

  MMC host:
   - pxamci: Fix read-only gpio detection polarity
   - mtk-sd: Preinitialize delay_phase to fix the case when delay is zero
   - android-goldfish: Fix build dependency by adding HAS_DMA
   - dw_mmc: Remove Seungwon Jeon from MAINTAINERS"

* tag 'mmc-v4.4-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: remove bondage between REQ_META and reliable write
  mmc: MMC_GOLDFISH should depend on HAS_DMA
  mmc: mediatek: Preinitialize delay_phase in get_best_delay()
  MAINTAINERS: mmc: Remove Seungwon Jeon from dw_mmc
  mmc: mmc: Improve reliability of mmc_select_hs400()
  mmc: mmc: Move mmc_switch_status()
  mmc: mmc: Fix HS setting in mmc_select_hs400()
  mmc: mmc: Improve reliability of mmc_select_hs200()
  mmc: pxamci: fix read-only gpio detection polarity

As previously reported, some userspace applications depend on bogomips
showed by /proc/cpuinfo. Although there is much less legacy impact on
aarch64 than arm, it does break libvirt.

This patch reverts commit 326b16db ("arm64: delay: don't bother
reporting bogomips in /proc/cpuinfo"), but with some tweak due to
context change and without the pr_info().

Fixes: 326b16db ("arm64: delay: don't bother reporting bogomips in /proc/cpuinfo")
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This was totally lost when I originally created the atomic helpers.

We probably should also check possible_clones in the helpers, but
since the legacy ones didn't do that this is for a separate patch.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447868808-10266-1-git-send-email-daniel.vetter@ffwll.ch

This reverts

commit 6764e9f8
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Thu Aug 27 15:44:06 2015 +0200

    drm/i915: skip modeset if compatible for everyone.

Bring back the i915.fastboot module parameter, disabled by default, due
to backlight regression on Chromebook Pixel 2015.

Apparently the firmware of the Chromebook in question enables the panel
but disables backlight to avoid a brief garbage scanout upon loading the
kernel/module. With fastboot, we leave the backlight untouched, in this
case disabled. The user would have to do a modeset (i.e. not just crank
up the brightness) to enable the backlight.

There is no clean fix readily available, so get back to the drawing
board by reverting.

[N.B. The reference below is for when the thread was included on public
lists, and some of the context had already been dropped by then.]
Reported-and-tested-by: Olof Johansson <olof@lixom.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com
Fixes: 6764e9f8 ("drm/i915: skip modeset if compatible for everyone.")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com

The machine hang completely with the following message on the console:

[  487.777538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
[  487.777554] IP: [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30
[  487.777557] PGD 42e9f7067 PUD 42f2fa067 PMD 0
[  487.777560] Oops: 0002 [#1] SMP
...
[  487.777618] CPU: 21 PID: 3190 Comm: Xorg Tainted: G            E   4.4.0-rc1-3-default+ #6
[  487.777620] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRHSXSD1.86B.0059.R00.1501081238 01/08/2015
[  487.777621] task: ffff880853ae4680 ti: ffff8808696d4000 task.ti: ffff8808696d4000
[  487.777625] RIP: 0010:[<ffffffff8158aaee>]  [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30
[  487.777627] RSP: 0018:ffff8808696d79c0  EFLAGS: 00010246
[  487.777628] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  487.777629] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000060
[  487.777630] RBP: ffff8808696d79e0 R08: 0000000000000000 R09: ffff88086924a780
[  487.777631] R10: 000000000001bb40 R11: 0000000000003246 R12: 0000000000000000
[  487.777632] R13: ffff880463a27360 R14: ffff88046ca50218 R15: 0000000000000080
[  487.777634] FS:  00007f3f81c5a8c0(0000) GS:ffff88086f060000(0000) knlGS:0000000000000000
[  487.777635] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  487.777636] CR2: 0000000000000060 CR3: 000000042e678000 CR4: 00000000001406e0
[  487.777638] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  487.777639] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  487.777639] Stack:
[  487.777642]  ffffffffa00eb5fa ffff8808696d7b60 ffff88086b87d800 0000000000000000
[  487.777644]  ffff8808696d7ac8 ffffffffa01694b6 ffff8808696d7ae8 ffffffff8109c8d5
[  487.777647]  ffff880469158740 ffff880463a27000 ffff88086b87d800 ffff88086b87d800
[  487.777647] Call Trace:
[  487.777674]  [<ffffffffa00eb5fa>] ? drm_gem_object_lookup+0x1a/0xa0 [drm]
[  487.777681]  [<ffffffffa01694b6>] mga_crtc_cursor_set+0xc6/0xb60 [mgag200]
[  487.777691]  [<ffffffff8109c8d5>] ? find_busiest_group+0x35/0x4a0
[  487.777696]  [<ffffffff81086294>] ? __might_sleep+0x44/0x80
[  487.777699]  [<ffffffff815888c2>] ? __ww_mutex_lock+0x22/0x9c
[  487.777722]  [<ffffffffa0104f64>] ? drm_modeset_lock+0x34/0xf0 [drm]
[  487.777733]  [<ffffffffa0148d9e>] restore_fbdev_mode+0xee/0x2a0 [drm_kms_helper]
[  487.777742]  [<ffffffffa014afce>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [drm_kms_helper]
[  487.777748]  [<ffffffffa014b037>] drm_fb_helper_set_par+0x27/0x50 [drm_kms_helper]
[  487.777752]  [<ffffffff8134560c>] fb_set_var+0x18c/0x3f0
[  487.777777]  [<ffffffffa02a9b0a>] ? __ext4_handle_dirty_metadata+0x8a/0x210 [ext4]
[  487.777783]  [<ffffffff8133cb97>] fbcon_blank+0x1b7/0x2b0
[  487.777790]  [<ffffffff813be2a3>] do_unblank_screen+0xb3/0x1c0
[  487.777795]  [<ffffffff813b5aba>] vt_ioctl+0x118a/0x1210
[  487.777801]  [<ffffffff813a8fe0>] tty_ioctl+0x3f0/0xc90
[  487.777808]  [<ffffffff81172018>] ? kzfree+0x28/0x30
[  487.777813]  [<ffffffff811e053f>] ? mntput+0x1f/0x30
[  487.777817]  [<ffffffff811d3f5d>] do_vfs_ioctl+0x30d/0x570
[  487.777822]  [<ffffffff8107ed3a>] ? task_work_run+0x8a/0xa0
[  487.777825]  [<ffffffff811d4234>] SyS_ioctl+0x74/0x80
[  487.777829]  [<ffffffff8158aeae>] entry_SYSCALL_64_fastpath+0x12/0x71
[  487.777851] Code: 65 ff 0d ce 02 a8 7e 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 e8 b0 01 5d c3 0f 1f 00 65 ff 05 b1 02 a8 7e 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 4e f5 b1 ff 5d
[  487.777854] RIP  [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30
[  487.777855]  RSP <ffff8808696d79c0>
[  487.777856] CR2: 0000000000000060
[  487.777860] ---[ end trace 672a2cd555e0ebd3 ]---

The cursor code may be entered with file_priv == NULL && handle == NULL.
The problem was introduced by:

"bf89209a drm/mga200g: Hold a proper reference for cursor_set"

which calls drm_gem_object_lookup(dev, file_priv...). Previously this wasn't
a problem because we checked the handle. Move the check early in the function
can fix the problem.
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Here are a few little VC4 fixes for 4.4 that I didn't get in to you
before the -next pull request.  I dropped the feature-ish one I'd
mentioned, and also droppped the one I saw you included in the last
-fixes pull request.

* 'drm-vc4-fixes' of git://github.com/anholt/linux:
  drm/vc4: Make sure that planes aren't scaled.
  drm/vc4: Fix some failure to track __iomem decorations on pointers.
  drm/vc4: checking for NULL instead of IS_ERR
  drm/vc4: fix itnull.cocci warnings
  drm/vc4: fix platform_no_drv_owner.cocci warnings
  drm/vc4: vc4_plane_duplicate_state() can be static

Radeon and amdgpu fixes for 4.4.  A bit more the usual since I missed
last week.  Misc fixes all over the place.  The big changes are the
tiling configuration fixes for Fiji.

* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
  drm/amdgpu: reserve/unreserve objects out of map/unmap operations
  drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_bo
  drm/amdgpu: add lock for interval tree in vm
  drm/amdgpu: keep the owner for VMIDs
  drm/amdgpu: move VM manager clean into the VM code again
  drm/amdgpu: cleanup VM coding style
  drm/amdgpu: remove unused VM manager field
  drm/amdgpu: cleanup scheduler command submission
  drm/amdgpu: fix typo in firmware name
  drm/amdgpu: remove the unnecessary parameter adev for amdgpu_sa_bo_new()
  drm/amdgpu: wait interruptible when semaphores are disabled v2
  drm/amdgpu: update pd while updating vm as well
  drm/amdgpu: fix handling order in scheduler CS
  drm/amdgpu: fix incorrect mutex usage v3
  drm/amdgpu: cleanup scheduler fence get/put dance
  drm/amdgpu: add command submission workflow tracepoint
  drm/amdgpu: update Fiji's tiling mode table
  drm/amdgpu: fix bug that can't enter thermal interrupt for bonaire.
  drm/amdgpu: fix seq_printf format string
  drm/radeon: fix quirk for MSI R7 370 Armor 2X
  ...

DAX handling of COW faults has wrong locking sequence:
	dax_fault does i_mmap_lock_read
	do_cow_fault does i_mmap_unlock_write

Ross's commit[1] missed a fix[2] that Kirill added to Matthew's
commit[3].

Original COW locking logic was introduced by Matthew here[4].

This should be applied to v4.3 as well.

[1] 0f90cc66 mm, dax: fix DAX deadlocks
[2] 52a2b53f mm, dax: use i_mmap_unlock_write() in do_cow_fault()
[3] 84317297 dax: fix race between simultaneous faults
[4] 2e4cdab0 mm: allow page fault handlers to perform the COW

Cc: <stable@vger.kernel.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Revert commit 053f56de (Documentation: kernel_parameters for Intel P
state driver) as the code documented by it has been reverted already.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The recently added mt8173 cpufreq driver relies on the cpu topology
that is always present on ARM64 but optional on ARM32:

drivers/cpufreq/mt8173-cpufreq.c: In function 'mtk_cpufreq_init':
drivers/cpufreq/mt8173-cpufreq.c:441:30: error: 'cpu_topology' undeclared (first use in this function)
  cpumask_copy(policy->cpus, &cpu_topology[policy->cpu].core_sibling);

This refines the Kconfig dependencies so that we can still build on
ARM32, but only if COMPILE_TEST is selected and the CPU topology
code is present.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

There are two flavors of Atom cores to be supported by intel_pstate,
Silvermont and Airmont, so make the driver distinguish between them by
adding separate frequency tables.

Separate the CPU defaults params for each of them and match the CPU IDs
against them as appropriate.
Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com>
Signed-off-by: Stephane Gasparini <stephane.gasparini@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Rename symbol and function names starting with "BYT" or "byt" to
start with "ATOM" or "atom", respectively, so as to make it clear
that they may apply to Atom in general and not just to Baytrail
(the goal is to support several Atoms architectures eventually).

This should not lead to any functional changes.
Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com>
Signed-off-by: Stephane Gasparini <stephane.gasparini@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw : Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit 37afb000 (cpufreq: intel_pstate: Use ACPI perf
configuration) that is reported to cause a regression to happen
on a system where invalid data are returned by the ACPI _PSS object.

Since that commit makes assumptions regarding the _PSS output
correctness that may turn out to be overly optimistic in general,
there is a concern that it may introduce regression on more
systems, so it's better to revert it now and we'll revisit the
underlying issue in the next cycle with a more robust solution.

Conflicts:
        drivers/cpufreq/intel_pstate.c

Fixes: 37afb000 (cpufreq: intel_pstate: Use ACPI perf configuration)
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit 4ef45148 (cpufreq: intel_pstate: Avoid calculation for
max/min) as it depends on commit 37afb000 (cpufreq: intel_pstate: Use
ACPI perf configuration) that causes problems to happen and needs to be
reverted.

Conflicts:
	drivers/cpufreq/intel_pstate.c
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Adding myself as co-maintainer of nand controller driver
for the Broadcom SoCs.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>