Very few (mlxsw) upstream drivers seem to allow offload of chains
other than 0.  Save driver developers typing and add a helper for
checking both if ethtool's TC offload flag is on and if chain is 0.
This helper will set the extack appropriately in both error cases.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Issue found by checkpatch.
Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com>
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resolved Warning: networking block comments don't use an empty /* line,
use /* Comment...
Issue found by checkpatch.
Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2018-01-25

Here's one last bluetooth-next pull request for the 4.16 kernel:

 - Improved support for Intel controllers
 - New set_parity method to serdev (agreed with maintainers to be taken
   through bluetooth-next)
 - Fix error path in hci_bcm (missing call to serdev close)
 - New ID for BCM4343A0 UART controller

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

t4_wr_mbox_meat_timeout() can be called from both softirq
context and process context, hence protect the mbox with
spin_lock_bh() instead of simple spin_lock()
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 allows routes to be installed when the device is not up (admin up).
Worse, it does not mark it as LINKDOWN. IPv4 does not allow it and really
there is no reason for IPv6 to allow it, so check the flags and deny if
device is admin down.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: more socket closing improvements

these patches improve the smc behavior for abnormal socket closing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If a problem for at least one connection of a link group is detected,
the whole link group and all its connections are terminated.
This patch adds a check for healthy link group when trying to reserve
a work request, and checks for healthy connections before starting
a tx worker.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a new connection with a new rmb is added to a link group, its
memory region is registered. If a link group is terminated, a pending
registration requires a wake up.

And consolidate setting of tx_flag peer_conn_abort in smc_lgr_terminate().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once a linkgroup is created successfully, it stays alive for a
certain time to service more connections potentially created.
If one of the initialization steps for a new linkgroup fails,
the linkgroup should not be reused by other connections following.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If ib_post_send() fails, terminate all connections of this
link group.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A state transition from closing state SMC_PEERFINCLOSEWAIT to closing
state SMC_APPFINCLOSEWAIT is not allowed. Once a closing indication
from the peer has been received, the socket reaches state SMC_CLOSED.

And receiving a peer_conn_abort just changes the state of the socket
into one of the states SMC_PROCESSABORT or SMC_CLOSED;
sending a peer_conn_abort occurs in smc_close_active() for state
SMC_PROCESSABORT only.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an SMC socket is aborted, the tx worker should be cancelled.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: support PTP on 8000 and X2000 series NICs

Starting from the 8000-series (Medford 1), SFC NICs can timestamp TX packets
 sent through an ordinary DMA queue, rather than a special control-plane
 operation as in the 7000-series.  Patches 2-8 implement support for this.
The X2000-series (Medford 2) changes the format of timestamps, from seconds+
 (2^27)ths to seconds + quarter nanoseconds, as well as changing the shift
 of the frequency adjustment for increased precision.  Patches 9-12
 implement support for these changes.
Patch #1 is an unrelated fix for NAPI budget handling, needed in order for
 TX completion changes in the later patches to apply cleanly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Support increased precision frequency adjustment format (FP44) used
 by Medford2 adapters.
Signed-off-by: Laurence Evans <levans@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The time_format that we stash in the PTP data structure is never
 referenced, so we can remove it.  Instead, store the information needed
 to interpret sync event timestamps.
Also rolls in a couple of other related minor PTP fixes.

Based on patches by Bert Kenward <bkenward@solarflare.com> and Laurence
 Evans <levans@solarflare.com>.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support MC_CMD_PTP_OUT_GET_TIMESTAMP_CORRECTIONS_V2.  Extract general
 timestamp corrections in addition to PTP corrections.  Apply receive
 timestamp corrections for general datapath receive timestamping, and
 correspondingly for transmit.
Signed-off-by: Laurence Evans <levans@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use timestamp conversion function with correction to avoid duplicate
 correction handling.
Signed-off-by: Laurence Evans <levans@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We check the license for TX hardware timestamping capability.
The PTP probe will have enabled PTP sync events from the adapter.  If
 later, at TX queue init, it turns out we do not have the license, we
 don't need the sync events either.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For this we create and use one or more new TX queues on the PTP channel,
 and enable sync events for it.
Based on a patch by Martin Habets <mhabets@solarflare.com>.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TX timestamps on 8000 series are supplied from the MAC. This timestamp is
 only 48 bits long. The high order bits from the last time sync event are
 used for the top 16 bits.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we try to enable the feature and do not have the license for it, the
 MCPU will refuse and fail our TX queue init.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can now transmit SKBs in 2 ways:
1. Via the MC (for the 7XXX series and earlier), using
   efx_ptp_xmit_skb_mc().
2. Via the TX queues on the dedicated PTP channel (8XXX series and later),
   using efx_ptp_xmit_skb_queue().
The PTP worker thread uses the method set up at probe time. It never
 checked the return code from the old efx_ptp_xmit_skb(), so it now
 returns void.
We increment the TX dropped counter of the device if the transmit fails.

As a result of the probe per channel the remove gets called multiple times.
 Clean up efx->ptp_data properly to avoid the 2nd call blowing up.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use MC capability MC_CMD_GET_CAPABILITIES_V2_OUT_TX_MAC_TIMESTAMPING to
 detect whether the NIC supports timestamping packets sent out the main
 datapath.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before this work, TX timestamping is done by sending each SKB to the MC.
On the 8000 series (Medford1) we have high speed timestamping via the
 MAC, which means we can use normal TX queues for this without a
 significant drop in bandwidth.  On the X2000 series (Medford2) support
 for transmitting via the MC is removed, so the new way must be used.

This patch enables timestamping on a TX queue, if requested.
It also enhances TX event handling to process the extra completion events,
 and puts the time in the SKB.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NAPI budget is only for RX processing work, not other work such as
 TX or MCDI completion handling.
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we unhash a dying net from netns_ids lists
under rtnl_lock(). It's a leftover from the time when
net::netns_ids was introduced. There was no net::nsid_lock,
and rtnl_lock() was mostly need to order modification
of alive nets nsid idr, i.e. for:
	for_each_net(tmp) {
		...
		id = __peernet2id(tmp, net);
		idr_remove(&tmp->netns_ids, id);
		...
	}

Since we have net::nsid_lock, the modifications are
protected by this local lock, and now we may introduce
better scheme of netns_ids destruction.

Let's look at the functions peernet2id_alloc() and
get_net_ns_by_id(). Previous commits taught these
functions to work well with dying net acquired from
rtnl unlocked lists. And they are the only functions
which can hash a net to netns_ids or obtain from there.
And as easy to check, other netns_ids operating functions
works with id, not with net pointers. So, we do not
need rtnl_lock to synchronize cleanup_net() with all them.

The another property, which is used in the patch,
is that net is unhashed from net_namespace_list
in the only place and by the only process. So,
we avoid excess rcu_read_lock() or rtnl_lock(),
when we'are iterating over the list in unhash_nsid().

All the above makes possible to keep rtnl_lock() locked
only for net->list deletion, and completely avoid it
for netns_ids unhashing and destruction. As these two
doings may take long time (e.g., memory allocation
to send skb), the patch should positively act on
the scalability and signify decrease the time, which
rtnl_lock() is held in cleanup_net().
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The firmware download flow for RAM SKU is same for both USB and UART
and this patch creates a common function for both driver.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Avoid negative netdev refcount in error flow of xfrm state add, from
    Aviad Yehezkel.

 2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
    ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
    From Yossi Kuperman.

 3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
    failing to allocate an appropriate amount of headroom. From
    Guillaume Nault.

 4) Fix memory leak in vmxnet3 driver, from Neil Horman.

 5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
    from Wolfgang Bumiller.

 6) Restrict what kinds of sockets can be bound to the KCM multiplexer
    and also disallow when another layer has attached to the socket and
    made use of sk_user_data. From Tom Herbert.

 7) Fix use before init of IOTLB in vhost code, from Jason Wang.

 8) Correct STACR register write bit definition in IBM emac driver, from
    Ivan Mikhaylov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/ibm/emac: wrong bit is used for STA control register write
  net/ibm/emac: add 8192 rx/tx fifo size
  vhost: do not try to access device IOTLB when not initialized
  vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
  i40e: flower: check if TC offload is enabled on a netdev
  qed: Free reserved MR tid
  qed: Remove reserveration of dpi for kernel
  kcm: Check if sk_user_data already set in kcm_attach
  kcm: Only allow TCP sockets to be attached to a KCM mux
  net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
  net: sched: em_nbyte: don't add the data offset twice
  mlxsw: spectrum_router: Don't log an error on missing neighbor
  vmxnet3: repair memory leak
  ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
  pppoe: take ->needed_headroom of lower device into account on xmit
  xfrm: fix boolean assignment in xfrm_get_type_offload
  xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
  xfrm: fix error flow in case of add state fails
  xfrm: Add SA to hardware at the end of xfrm_state_construct()

no users since 2014
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

same story...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Same story as with dev_ifsioc(), except that the last cases with non-trivial
conversions had been taken out in 2013...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Once upon a time net/socket.c:dev_ifsioc() used to handle SIOCSHWTSTAMP and
SIOCSIFMAP.  These have different native and compat layout, so the format
conversion had been needed.  In 2009 these two cases had been taken out,
turning the rest into a convoluted way to calling sock_do_ioctl().  We copy
compat structure into native one, call sock_do_ioctl() on that and copy
the result back for the in/out ioctls.  No layout transformation anywhere,
so we might as well just call sock_do_ioctl() and skip all the headache with
copying.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>