into home.osdl.org:/home/torvalds/v2.5/linux

Patch from Yves Rutschle.

This cset allows LART to build again.

This allows PPC to insert resource descriptors later on after boot.

into home.osdl.org:/home/torvalds/v2.5/linux

into shaggy.austin.ibm.com:/home/shaggy/bk/jfs-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

the online backup tools.

this correctly

This patch replaces many assert statements, which caused a BUG(), with
improved code to mark the superblock dirty and then proceed as specified by
the errors= mount flag (as ext2 and ext3 do).  JFS's default for the errors
option is "remount-ro" in order to prevent addition data corruption when a
problem is found.

These asserts are usually triggered by on-disk data corruption.  By marking
the superblock dirty, fsck will perform a complete check on the file system
and correct the problems, rather than simply replaying the journal, inviting
later trouble.

Submitted by Karl Rister & Dave Kleikamp

into penguin.americas.sgi.com:/src/lord/bitkeeper/xfs-2.6

Replace read/write lock used for HPET timer monotonic_lock with seqlock.
Similar to locking used on xtime and monotonic_lock in timers/timer_tsc.c

Replace read/write lock used for cyclone timer monotonic_lock with seqlock.
Similar to locking used on xtime and monotonic_lock in timers/timer_tsc.c

SGI Modid: 2.5.x-xfs:slinx:159631a

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

breaks everybody else.

Instead, fix the NOMMU case by avoiding the part that walks page
tables.

 - fix VIDIOC_S_FBUF for v4l1 backward compatility with xfree86 / v4l_drv

 - some progress on DVB-C analog module: experimentally fix frequency
   offset, initialize msp3400 for analog TV sound
 - Reduce the number of dropped TS packets when an error is detected
   (Jon Burgess)
 - If somebody calls G_TUNER for a DVB-C card w/ analog module, then
   check for the selected tuner, not if the currently selected channel
   has a tuner.
 - play_iframe may be used to play stillpicture frames, that can either
   by complete i-frames or partial p-frames.  In any case, the av7110
   needs about 400kB of video data, before the internal video decoder
   starts displaying anything.  for stillframes, this is bad, so we
   *always* loop writing the frame until the magic amount is reached.
   stupid, but works... 
 - applied 64bit fixes by Pedro Miguel Teixeira <pmsjt@warner.homeip.net

 - split up saa7146 compilation in core part (saa7146.o) and video+vbi
   part (saa7146_vv).  some drivers need both (av7110.c), some drivers
   only need the core stuff (budget*.c)
 - add entry for sp887x DVB-T modulator to corresponding Kconfig
 - use new SELECT facility of Kconfig, first mentioned by Adrian Bunk
   and Roman Zippel in DVB subsystem
 - use SELECT in media/video/Kconfig, too.

 - add budget driver as possible client of the ves1820 frontend driver
 - fix wrong include in sp887x.c frontend driver
 - fix wrong chip description in tda1004xh frontend driver
 - fixed detection of stv0299 if chip is in standby mode
 - change some #ifdef to #if, for easier debug enable/disable
 - ves1820: patch by Peter Bieringer: nicer log output
 - ves1820: allow PWM (tuner calibaration) value from EEPROM to be
   overridden on command line (based on patch by Peter Bieringer).  New
   module paramters: "pwm" (max 4 ints, range -1..0xff) and "verbose"
   (to print AFC value aftger tuning).

 - various av7110 updates

 - patch by Jon Burgess to fix DMA issues
 - reduce the number of dropped TS packets when an error is detected
   (Jon Burgess)
 - use budget-ci driver for new TT DVB-T cards with onboard MSP430.

 - the usual c99 initialization fixes all over the DVB place

 - fix copyright stuff in various files:
   - remove e-mail addresses that don't exist anymore, but of course keep
     the names
   - change license from GPL to LGPL in dvb_i2c.h (Convergence code)
   - change license from GPL to LGPL in dvb_ringbuffer.h (ack by original
     author Oliver Endriss)
   - add LGPL license to dvb_functions

 - allow multiple read device opens

 - some Kconfig simplifications
 - FIELD_ALTERNATE capture was broken, add a "wait for vbi" command
   before actually waiting for the field change
 - improvements regarding streaming capture to gfx card memory.
 - captured frames could only be page aligned.  fixed.
 - fix pgtable_build_single, it should work for all kinds of buffers now
   (system memory (kernel/user) and gfx-memory)
 - Fix bytesperline-calculation for V4L2_FIELD_ALTERNATE vs.
   V4L2_FIELD_INTERLACED capture

 - add new DVB-T frontend driver sp887x.c