The driver has never used HPT_PCI_FAST -- drop it.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

This driver uses a string of the *if* statements in atp8xx_fixup() where
a *switch* statement would fit better...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

This driver uses a string of the *if* statements in artop_init_one()
where the *switch* statement would fit better.  While fixing this,
refactor the 6280 code to e.g. avoid a compound statement inside
the *case* section...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The driver's bmdma_stop() method writes to the wrong PCI config register
(0x52 intead of 0x54) when trying to clear the state machine on secondary
channel -- "luckily", the write falls on a read-only part of the primary
channel MISC. control 3 register, so no collateral damage is done...

Alan Cox fixed the HPT37x driver in commit 6929da44 ("[PATCH] hpt37x:
Two important bug fixes") but forgot to check the HPT3x2N driver which has
the same bug. :-/
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The driver's prereset() method still doesn't check the channel enable bits.
The bug was there for the entire time the driver has existed. :-/

Alan Cox fixed the HPT37x driver in commit b5bf24b9 ("[PATCH] hpt37x:
Check the enablebits") but forgot to check the HPT3x2N driver which has
the same bug. :-/
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata_host_suspend() always returns 0, so the result checks in many drivers
look pointless.  Let's make this function return *void* instead of *int*.

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

ata_std_prereset() always returns 0, hence the check in ata_sff_prereset()
is pointless and thus it also can return only 0 (however, we cannot change
the prototypes of ata_{sff|std}_prereset() as they implement the driver's
prereset() method).

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The 200 ms delay before debouncing the PHY in `sata_link_resume()` is
not needed for the Marvell 88SE9235.

    $ lspci -nn -s 0021:0e:00.0
    0021:0e:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11)

So, remove it using the board_ahci_no_debounce_delay board definition.

Tested on IBM S822LC with current Linux 5.17-rc1:

Currently, without this patch (with 200 ms delay), device probe for ata1
takes 485 ms:

    [    3.358158] ata1: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000100 irq 39
    [    3.358175] ata2: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000180 irq 39
    [    3.358191] ata3: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000200 irq 39
    [    3.358207] ata4: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000280 irq 39
    […]
    [    3.677542] ata3: SATA link down (SStatus 0 SControl 300)
    [    3.677719] ata4: SATA link down (SStatus 0 SControl 300)
    [    3.839242] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.839828] ata2.00: ATA-10: ST1000NX0313         00LY266 00LY265IBM, BE33, max UDMA/133
    [    3.840029] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
    [    3.841796] ata2.00: configured for UDMA/133
    [    3.843231] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.844083] ata1.00: ATA-10: ST1000NX0313         00LY266 00LY265IBM, BE33, max UDMA/133
    [    3.844313] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
    [    3.846043] ata1.00: configured for UDMA/133

With this patch (no delay) device probe for ata1 takes 273 ms:

    [    3.624259] ata1: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000100 irq 39
    [    3.624436] ata2: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000180 irq 39
    [    3.624452] ata3: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000200 irq 39
    [    3.624468] ata4: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000280 irq 39
    […]
    [    3.731966] ata3: SATA link down (SStatus 0 SControl 300)
    [    3.732069] ata4: SATA link down (SStatus 0 SControl 300)
    [    3.897448] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.897678] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    3.898140] ata1.00: ATA-10: ST1000NX0313         00LY266 00LY265IBM, BE33, max UDMA/133
    [    3.898175] ata2.00: ATA-10: ST1000NX0313         00LY266 00LY265IBM, BE33, max UDMA/133
    [    3.898287] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
    [    3.898349] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
    [    3.900070] ata1.00: configured for UDMA/133
    [    3.900166] ata2.00: configured for UDMA/133
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Since the commit c05e6ff0 ("libata-acpi: implement
and use ata_acpi_init_gtm()") ata_acpi_on_suspend() just returns 0, so
its call from ata_eh_handle_port_suspend() doesn't make sense anymore.
Remove the function completely, at last...

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

In scsi_10_lba_len() and scsi_16_lba_len() functions, use
get_unaligned_bexx() to access a cdb LBA and length fields instead of
hardcoding the byte retrieval. With these simplification, the functions
can also be declared inline.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Use get_unaligned_be16() instead of using hardcoded accesses to
16-bits big endian cdb fields.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Remove the unnecessary "break" after the return statement in the
MODE_SELECT/MODE_SELECT_10 case.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>

The static array pio_timing is read-only so it make sense to make
it const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

The static arrays pio_timings and mwdma_timings are read-only so
it make sense to make them const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Make use of platform_get_mem_or_io() to simplify the code.

While at it, drop use of unlikely() from pata_platform_probe()
as it isn't a hotpath.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Pull irq fixes from Borislav Petkov:

 - Drop an unused private data field in the AIC driver

 - Various fixes to the realtek-rtl driver

 - Make the GICv3 ITS driver compile again in !SMP configurations

 - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec

 - Yet another kfree/bitmap_free conversion

 - Various DT updates (Renesas, SiFive)

* tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples
  dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
  dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support
  irqchip/gic-v3-its: Reset each ITS's BASERn register before probe
  irqchip/gic-v3-its: Fix build for !SMP
  irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap
  irqchip/realtek-rtl: Service all pending interrupts
  irqchip/realtek-rtl: Fix off-by-one in routing
  irqchip/realtek-rtl: Map control data to virq
  irqchip/apple-aic: Drop unused ipi_hwirq field

Pull perf fixes from Borislav Petkov:

 - Prevent accesses to the per-CPU cgroup context list from another CPU
   except the one it belongs to, to avoid list corruption

 - Make sure parent events are always woken up to avoid indefinite hangs
   in the traced workload

* tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix cgroup event list management
  perf: Always wake the parent event

Pull scheduler fix from Borislav Petkov:
 "Make sure the membarrier-rseq fence commands are part of the reported
  set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY"

* tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask

Pull x86 fixes from Borislav Petkov:

 - Add another Intel CPU model to the list of CPUs supporting the
   processor inventory unique number

 - Allow writing to MCE thresholding sysfs files again - a previous
   change had accidentally disabled it and no one noticed. Goes to show
   how much is this stuff used

* tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN
  x86/MCE/AMD: Allow thresholding interface updates after init

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: sysctl, binfmt, ia64, mm
  (memory-failure, folios, kasan, and psi), selftests, and ocfs2"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  ocfs2: fix a deadlock when commit trans
  jbd2: export jbd2_journal_[grab|put]_journal_head
  psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n
  psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n
  mm, kasan: use compare-exchange operation to set KASAN page tag
  kasan: test: fix compatibility with FORTIFY_SOURCE
  tools/testing/scatterlist: add missing defines
  mm: page->mapping folio->mapping should have the same offset
  memory-failure: fetch compound_head after pgmap_pfn_valid()
  ia64: make IA64_MCA_RECOVERY bool instead of tristate
  binfmt_misc: fix crash when load/unload module
  include/linux/sysctl.h: fix register_sysctl_mount_point() return type

commit 6f1b2285 introduces a regression which can deadlock as
follows:

  Task1:                              Task2:
  jbd2_journal_commit_transaction     ocfs2_test_bg_bit_allocatable
  spin_lock(&jh->b_state_lock)        jbd_lock_bh_journal_head
  __jbd2_journal_remove_checkpoint    spin_lock(&jh->b_state_lock)
  jbd2_journal_put_journal_head
  jbd_lock_bh_journal_head

Task1 and Task2 lock bh->b_state and jh->b_state_lock in different
order, which finally result in a deadlock.

So use jbd2_journal_[grab|put]_journal_head instead in
ocfs2_test_bg_bit_allocatable() to fix it.

Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com
Fixes: 6f1b2285 ("ocfs2: fix race between searching chunks and release journal_head from buffer_head")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Tested-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "ocfs2: fix a deadlock case".

This fixes a deadlock case in ocfs2.  We firstly export jbd2 symbols
jbd2_journal_[grab|put]_journal_head as preparation and later use them
in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the
deadlock.

This patch (of 2):

This exports symbols jbd2_journal_[grab|put]_journal_head, which will be
used outside modules, e.g.  ocfs2.

Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.comSigned-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When CONFIG_PROC_FS is disabled psi code generates the following
warnings:

  kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=]
      1364 | static const struct proc_ops psi_cpu_proc_ops = {
           |                              ^~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=]
      1355 | static const struct proc_ops psi_memory_proc_ops = {
           |                              ^~~~~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=]
      1346 | static const struct proc_ops psi_io_proc_ops = {
           |                              ^~~~~~~~~~~~~~~

Make definitions of these structures and related functions conditional
on CONFIG_PROC_FS config.

Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com
Fixes: 0e94682b ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When CONFIG_CGROUPS is disabled psi code generates the following
warnings:

  kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
      1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
           |                     ^~~~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
      1182 | void psi_trigger_destroy(struct psi_trigger *t)
           |      ^~~~~~~~~~~~~~~~~~~
  kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
      1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
           |          ^~~~~~~~~~~~~~~~

Change the declarations of these functions in the header to provide the
prototypes even when they are unused.

Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes: 0e94682b ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It has been reported that the tag setting operation on newly-allocated
pages can cause the page flags to be corrupted when performed
concurrently with other flag updates as a result of the use of
non-atomic operations.

Fix the problem by using a compare-exchange loop to update the tag.

Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101
Fixes: 2813b9c0 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks using __builtin_object_size(ptr), which when failed will
panic the kernel.

Because the KASAN test deliberately performs out-of-bounds operations,
the kernel panics with FORTIFY_SOURCE, for example:

 | kernel BUG at lib/string_helpers.c:910!
 | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
 | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G    B             5.16.0-rc3+ #3
 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
 | RIP: 0010:fortify_panic+0x19/0x1b
 | ...
 | Call Trace:
 |  kmalloc_oob_in_memset.cold+0x16/0x16
 |  ...

Fix it by also hiding `ptr` from the optimizer, which will ensure that
__builtin_object_size() does not return a valid size, preventing
fortified string functions from panicking.

Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.comSigned-off-by: Marco Elver <elver@google.com>
Reported-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The cited commits replaced preemptible with pagefault_disabled and
flush_kernel_dcache_page with flush_dcache_page respectively, hence need
to update the corresponding defines in the test.

  scatterlist.c: In function ‘sg_miter_stop’:
  scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration]
      flush_dcache_page(miter->page);
      ^~~~~~~~~~~~~~~~~
  In file included from linux/scatterlist.h:8:0,
                   from scatterlist.c:9:
  scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration]
      WARN_ON_ONCE(!pagefault_disabled());
                    ^
  linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’
    int __ret_warn_on = !!(condition);                      \
                           ^~~~~~~~~

Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com
Fixes: 723aca20 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()")
Fixes: 0e84f5db ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As with the other members of folio, the offset of page->mapping and
folio->mapping must be the same.  The compile-time check was
inadvertently removed during development.  Add it back.

[willy@infradead.org: changelog redo]

Link: https://lkml.kernel.org/r/20220104011734.21714-1-richard.weiyang@gmail.comSigned-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memory_failure_dev_pagemap() at the moment assumes base pages (e.g.
dax_lock_page()).  For devmap with compound pages fetch the
compound_head in case a tail page memory failure is being handled.

Currently this is a nop, but in the advent of compound pages in
dev_pagemap it allows memory_failure_dev_pagemap() to keep working.

Without this fix memory-failure handling (i.e.  MCEs on pmem) with
device-dax configured namespaces will regress (and crash).

Link: https://lkml.kernel.org/r/20211202204422.26777-2-joao.m.martins@oracle.comReported-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In linux-next, IA64_MCA_RECOVERY uses the (new) function
make_task_dead(), which is not exported for use by modules.  Instead of
exporting it for one user, convert IA64_MCA_RECOVERY to be a bool
Kconfig symbol.

In a config file from "kernel test robot <lkp@intel.com>" for a
different problem, this linker error was exposed when
CONFIG_IA64_MCA_RECOVERY=m.

Fixes this build error:

  ERROR: modpost: "make_task_dead" [arch/ia64/kernel/mca_recovery.ko] undefined!

Link: https://lkml.kernel.org/r/20220124213129.29306-1-rdunlap@infradead.org
Fixes: 0e25498f ("exit: Add and use make_task_dead.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should unregister the table upon module unload otherwise something
horrible will happen when we load binfmt_misc module again.  Also note
that we should keep value returned by register_sysctl_mount_point() and
release it later, otherwise it will leak.

Also, per Christian's comment, to fully restore the old behavior that
won't break userspace the check(binfmt_misc_header) should be
eliminated.

To reproduce:
  modprobe binfmt_misc
  modprobe -r binfmt_misc
  modprobe binfmt_misc
  modprobe -r binfmt_misc
  modprobe binfmt_misc

resulting in

  modprobe: can't load module binfmt_misc (kernel/fs/binfmt_misc.ko): Cannot allocate memory

and an unhappy kernel:

  binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
  binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
  BUG: unable to handle page fault for address: fffffbfff8004802
  Call Trace:
    init_misc_binfmt+0x2d/0x1000 [binfmt_misc]

Link: https://lkml.kernel.org/r/20220124181812.1869535-2-ztong0001@gmail.com
Fixes: 3ba442d5 ("fs: move binfmt_misc sysctl to its own file")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Christian Brauner<brauner@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The CONFIG_SYSCTL=n stub returns the wrong type.

Fixes: ee9efac4 ("sysctl: add helper to register a sysctl mount point")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'irqchip-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - Drop an unused private data field in the AIC driver

  - Various fixes to the realtek-rtl driver

  - Make the GICv3 ITS driver compile again in !SMP configurations

  - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec

  - Yet another kfree/bitmap_free conversion

  - Various DT updates (Renesas, SiFive)

Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org

Pull pci fixes from Bjorn Helgaas:

 - Fix compilation warnings in new mt7621 driver (Sergio Paracuellos)

 - Restore the sysfs "rom" file for VGA shadow ROMs, which was broken
   when converting "rom" to be a static attribute (Bjorn Helgaas)

* tag 'pci-v5.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/sysfs: Find shadow ROM before static attribute initialization
  PCI: mt7621: Remove unused function pcie_rmw()
  PCI: mt7621: Drop of_match_ptr() to avoid unused variable

Pull gpio fixes from Bartosz Golaszewski:
 "Two fixes for the gpio-simulator:

   - fix a bug with hogs not being set-up in gpio-sim when user-space
     sets the chip label to an empty string

   - include the gpio-sim documentation in the index"

* tag 'gpio-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: add doc file to index file
  gpio: sim: check the label length when setting up device properties

Pull char/misc driver fixes from Greg KH:
 "Here are two small char/misc driver fixes for 5.17-rc2 that fix some
  reported issues. They are:

   - fix up a merge issue in the at25.c driver that ended up dropping
     some lines in the driver. The removed lines ended being needed, so
     this restores it and the driver works again.

   - counter core fix where the wrong error was being returned, NULL
     should be the correct error for when memory is gone here, like the
     kmalloc() core does.

  Both of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  counter: fix an IS_ERR() vs NULL bug
  eeprom: at25: Restore missing allocation

Pull tty/serial driver fixes from Greg KH:
 "Here are some small bug fixes and reverts for reported problems with
  the tty core and drivers. They include:

   - revert the fifo use for the 8250 console mode. It caused too many
     regressions and problems, and had a bug in it as well. This is
     being reworked and should show up in a later -rc1 release, but it's
     not ready for 5.17

   - rpmsg tty race fix

   - restore the cyclades.h uapi header file. Turns out a compiler test
     suite used it for some unknown reason. Bring it back just for the
     parts that are used by the builder test so they continue to build.
     No functionality is restored as no one actually has this hardware
     anymore, nor is it really tested.

   - stm32 driver fixes

   - n_gsm flow control fixes

   - pl011 driver fix

   - rs485 initialization fix

  All of these have been in linux-next this week with no reported
  problems"

* tag 'tty-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  kbuild: remove include/linux/cyclades.h from header file check
  serial: core: Initialize rs485 RTS polarity already on probe
  serial: pl011: Fix incorrect rs485 RTS polarity on set_mctrl
  serial: stm32: fix software flow control transfer
  serial: stm32: prevent TDR register overwrite when sending x_char
  tty: n_gsm: fix SW flow control encoding/handling
  serial: 8250: of: Fix mapped region size when using reg-offset property
  tty: rpmsg: Fix race condition releasing tty port
  tty: Partially revert the removal of the Cyclades public API
  tty: Add support for Brainboxes UC cards.
  Revert "tty: serial: Use fifo in 8250 console driver"

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes for 5.17-rc2 that resolve a
  number of reported problems. These include:

   - typec driver fixes

   - xhci platform driver fixes for suspending

   - ulpi core fix

   - role.h build fix

   - new device ids

   - syzbot-reported bugfixes

   - gadget driver fixes

   - dwc3 driver fixes

   - other small fixes

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fix segmentation fault in cdns_lost_power function
  usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
  usb: gadget: at91_udc: fix incorrect print type
  usb: dwc3: xilinx: Fix error handling when getting USB3 PHY
  usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode
  usb: xhci-plat: fix crash when suspend if remote wake enable
  usb: common: ulpi: Fix crash in ulpi_match()
  usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS
  ucsi_ccg: Check DEV_INT bit only when starting CCG4
  USB: core: Fix hang in usb_kill_urb by adding memory barriers
  usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge
  usb: typec: tcpm: Do not disconnect when receiving VSAFE0V
  usb: typec: tcpm: Do not disconnect while receiving VBUS off
  usb: typec: Don't try to register component master without components
  usb: typec: Only attempt to link USB ports if there is fwnode
  usb: typec: tcpci: don't touch CC line if it's Vconn source
  usb: roles: fix include/linux/usb/role.h compile issue

Pull block fixes from Jens Axboe:

 - NVMe pull request
      - add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs (Wu
        Zheng)
      - remove the unneeded ret variable in nvmf_dev_show (Changcheng
        Deng)

 - Fix for a hang regression introduced with a patch in the merge
   window, where low queue depth devices would not always get woken
   correctly (Laibin)

 - Small series fixing an IO accounting issue with bio backed dm devices
   (Mike, Yu)

* tag 'block-5.17-2022-01-28' of git://git.kernel.dk/linux-block:
  dm: properly fix redundant bio-based IO accounting
  dm: revert partial fix for redundant bio-based IO accounting
  block: add bio_start_io_acct_time() to control start_time
  blk-mq: Fix wrong wakeup batch configuration which will cause hang
  nvme-fabrics: remove the unneeded ret variable in nvmf_dev_show
  nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs
  blk-mq: fix missing blk_account_io_done() in error path
  block: fix memory leak in disk_register_independent_access_ranges