Merge ACPI device enumeration changes, ACPI power management update,
ACPI resources management updates and an EC driver update for 6.5-rc1:

 - Reduce ACPI device enumeration overhead related to devices with
   dependencies (Rafael Wysocki).

 - Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
   Limonciello).

 - Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
   Bergmann).

 - Drop several ACPI resource management quirks related to IRQ ovverides
   on AMD "Zen" systems (Mario Limonciello).

 - Modify the ACPI EC driver to make it only clear the EC GPE status
   when handling the GPE (Jeremy Compostella).

* acpi-scan:
  ACPI: scan: Reduce overhead related to devices with dependencies

* acpi-pm:
  ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
  ACPI: PM: s2idle: fix section mismatch warning

* acpi-resource:
  ACPI: resource: Remove "Zen" specific match and quirks

* acpi-ec:
  ACPI: EC: Clear GPE on interrupt handling only

Pull ACPI fix from Rafael Wysocki:
 "Fix a kernel crash during early resume from ACPI S3 that has been
  present since the 5.15 cycle when might_sleep() was added to
  down_timeout(), which in some configurations of the kernel caused an
  implicit preemption point to trigger at a wrong time"

* tag 'acpi-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()

Pull thermal control fix from Rafael Wysocki:
 "Fix a regression introduced during the 6.3 cycle causing
  intel_soc_dts_iosf to report incorrect temperature values
  due to a coding mistake (Hans de Goede)"

* tag 'thermal-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures

Pull tracing fixes from Steven Rostedt:

 - Fix MAINTAINERS file to point to proper mailing list for rtla and rv

   The mailing list pointed to linux-trace-devel instead of
   linux-trace-kernel. The former is for the tracing libraries and the
   latter is for anything in the Linux kernel tree. The wrong mailing
   list was used because linux-trace-kernel did not exist when rtla and
   rv were created.

 - User events:

    - Fix matching of dynamic events to their user events

      When user writes to dynamic_events file, a lookup of the
      registered dynamic events is made, but there were some cases that
      a match could be incorrectly made.

    - Add auto cleanup of user events

      Have the user events automatically get removed when the last
      reference (file descriptor) is closed. This was asked for to
      prevent leaks of user events hanging around needing admins to
      clean them up.

    - Add persistent logic (but not let user space use it yet)

      In some cases, having a persistent user event (one that does not
      get cleaned up automatically) is useful. But there's still debates
      about how to expose this to user space. The infrastructure is
      added, but the API is not.

    - Update the selftests

      Update the user event selftests to reflect the above changes"

* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/user_events: Document auto-cleanup and remove dyn_event refs
  selftests/user_events: Adapt dyn_test to non-persist events
  selftests/user_events: Ensure auto cleanup works as expected
  tracing/user_events: Add auto cleanup and future persist flag
  tracing/user_events: Track refcount consistently via put/get
  tracing/user_events: Store register flags on events
  tracing/user_events: Remove user_ns walk for groups
  selftests/user_events: Add perf self-test for empty arguments events
  selftests/user_events: Clear the events after perf self-test
  selftests/user_events: Add ftrace self-test for empty arguments events
  tracing/user_events: Fix the incorrect trace record for empty arguments events
  tracing: Modify print_fields() for fields output order
  tracing/user_events: Handle matching arguments that is null from dyn_events
  tracing/user_events: Prevent same name but different args event
  tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list

Pull btrfs fix from David Sterba:
 "One more regression fix for an assertion failure that uncovered a
  nasty problem with stripe calculations. This is caused by a u32
  overflow when there are enough devices. The fstests require 6 so this
  hasn't been caught, I was able to hit it with 8.

  The fix is minimal and only adds u64 casts, we'll clean that up later.
  I did various additional tests to be sure"

* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix u32 overflows when left shifting stripe_nr

Pull smb server fixes from Steve French:
 "Four smb3 server fixes, all also for stable:

   - fix potential oops in parsing compounded requests

   - fix various paths (mkdir, create etc) where mnt_want_write was not
     checked first

   - fix slab out of bounds in check_message and write"

* tag '6.4-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: validate session id and tree id in the compound request
  ksmbd: fix out-of-bound read in smb2_write
  ksmbd: add mnt_want_write to ksmbd vfs functions
  ksmbd: validate command payload size

[BUG]
David reported an ASSERT() get triggered during fio load on 8 devices
with data/raid6 and metadata/raid1c3:

  fio --rw=randrw --randrepeat=1 --size=3000m \
	  --bsrange=512b-64k --bs_unaligned \
	  --ioengine=libaio --fsync=1024 \
	  --name=job0 --name=job1 \

The ASSERT() is from rbio_add_bio() of raid56.c:

	ASSERT(orig_logical >= full_stripe_start &&
	       orig_logical + orig_len <= full_stripe_start +
	       rbio->nr_data * BTRFS_STRIPE_LEN);

Which is checking if the target rbio is crossing the full stripe
boundary.

  [100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622
  [100.795] ------------[ cut here ]------------
  [100.796] kernel BUG at fs/btrfs/raid56.c:1622!
  [100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  [100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124
  [100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
  [100.802] Workqueue: writeback wb_workfn (flush-btrfs-1)
  [100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs]
  [100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246
  [100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01
  [100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001
  [100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f
  [100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400
  [100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000
  [100.817] FS:  0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
  [100.821] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0
  [100.824] Call Trace:
  [100.825]  <TASK>
  [100.825]  ? die+0x32/0x80
  [100.826]  ? do_trap+0x12d/0x160
  [100.827]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.827]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.829]  ? do_error_trap+0x90/0x130
  [100.830]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.831]  ? handle_invalid_op+0x2c/0x30
  [100.833]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.835]  ? exc_invalid_op+0x29/0x40
  [100.836]  ? asm_exc_invalid_op+0x16/0x20
  [100.837]  ? rbio_add_bio+0x204/0x210 [btrfs]
  [100.837]  raid56_parity_write+0x64/0x270 [btrfs]
  [100.838]  btrfs_submit_chunk+0x26e/0x800 [btrfs]
  [100.840]  ? btrfs_bio_init+0x80/0x80 [btrfs]
  [100.841]  ? release_pages+0x503/0x6d0
  [100.842]  ? folio_unlock+0x2f/0x60
  [100.844]  ? __folio_put+0x60/0x60
  [100.845]  ? btrfs_do_readpage+0xae0/0xae0 [btrfs]
  [100.847]  btrfs_submit_bio+0x21/0x60 [btrfs]
  [100.847]  submit_one_bio+0x6a/0xb0 [btrfs]
  [100.849]  extent_write_cache_pages+0x395/0x680 [btrfs]
  [100.850]  ? __extent_writepage+0x520/0x520 [btrfs]
  [100.851]  ? mark_usage+0x190/0x190
  [100.852]  extent_writepages+0xdb/0x130 [btrfs]
  [100.853]  ? extent_write_locked_range+0x480/0x480 [btrfs]
  [100.854]  ? mark_usage+0x190/0x190
  [100.854]  ? attach_extent_buffer_page+0x220/0x220 [btrfs]
  [100.855]  ? reacquire_held_locks+0x178/0x280
  [100.856]  ? writeback_sb_inodes+0x245/0x7f0
  [100.857]  do_writepages+0x102/0x2e0
  [100.858]  ? page_writeback_cpu_online+0x10/0x10
  [100.859]  ? __lock_release.isra.0+0x14a/0x4d0
  [100.860]  ? reacquire_held_locks+0x280/0x280
  [100.861]  ? __lock_acquired+0x1e9/0x3d0
  [100.862]  ? do_raw_spin_lock+0x1b0/0x1b0
  [100.863]  __writeback_single_inode+0x94/0x450
  [100.864]  writeback_sb_inodes+0x372/0x7f0
  [100.864]  ? lock_sync+0xd0/0xd0
  [100.865]  ? do_raw_spin_unlock+0x93/0xf0
  [100.866]  ? sync_inode_metadata+0xc0/0xc0
  [100.867]  ? rwsem_optimistic_spin+0x340/0x340
  [100.868]  __writeback_inodes_wb+0x70/0x130
  [100.869]  wb_writeback+0x2d1/0x530
  [100.869]  ? __writeback_inodes_wb+0x130/0x130
  [100.870]  ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0
  [100.870]  wb_do_writeback+0x3eb/0x480
  [100.871]  ? wb_writeback+0x530/0x530
  [100.871]  ? mark_lock_irq+0xcd0/0xcd0
  [100.872]  wb_workfn+0xe0/0x3f0<

[CAUSE]
Commit a97699d1 ("btrfs: replace map_lookup->stripe_len by
BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce
u64 division.

Function btrfs_max_io_len() is to get the length to the stripe boundary.

It calculates the full stripe start offset (inside the chunk) by the
following code:

		*full_stripe_start =
			rounddown(*stripe_nr, nr_data_stripes(map)) <<
			BTRFS_STRIPE_LEN_SHIFT;

The calculation itself is fine, but the value returned by rounddown() is
dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which
returned int).

Thus the result is also u32, then we do the left shift, which can
overflow u32.

If such overflow happens, @full_stripe_start will be a value way smaller
than @offset, causing later "full_stripe_len - (offset -
*full_stripe_start)" to underflow, thus make later length calculation to
have no stripe boundary limit, resulting a write bio to exceed stripe
boundary.

There are some other locations like this, with a u32 @stripe_nr got left
shift, which can lead to a similar overflow.

[FIX]
Fix all @stripe_nr with left shift with a type cast to u64 before the
left shift.

Those involved @stripe_nr or similar variables are recording the stripe
number inside the chunk, which is small enough to be contained by u32,
but their offset inside the chunk can not fit into u32.

Thus for those specific left shifts, a type cast to u64 is necessary so
this patch does not touch them and the code will be cleaned up in the
future to keep the fix minimal.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: a97699d1 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN")
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Fix races in Hyper-V PCI controller (Dexuan Cui)

 - Fix handling of hyperv_pcpu_input_arg (Michael Kelley)

 - Fix vmbus_wait_for_unload to scan present CPUs (Michael Kelley)

 - Call hv_synic_free in the failure path of hv_synic_alloc (Dexuan Cui)

 - Add noop for real mode handlers for virtual trust level code (Saurabh
   Sengar)

* tag 'hyperv-fixes-signed-20230619' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  PCI: hv: Add a per-bus mutex state_lock
  Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"
  PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_dev
  PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panic
  PCI: hv: Fix a race condition bug in hv_pci_query_relations()
  arm64/hyperv: Use CPUHP_AP_HYPERV_ONLINE state to fix CPU online sequencing
  x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline
  Drivers: hv: vmbus: Fix vmbus_wait_for_unload() to scan present CPUs
  Drivers: hv: vmbus: Call hv_synic_free() if hv_synic_alloc() fails
  x86/hyperv/vtl: Add noop for realmode pointers

Pull AFS writeback fixes from David Howells:

 - release the acquired batch before returning if we got >=5 skips

 - retry a page we had to wait for rather than skipping over it after
   the wait

* tag 'afs-fixes-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix waiting for writeback then skipping folio
  afs: Fix dangling folio ref counts in writeback

Commit acc8d858 converted afs_writepages_region() to write back a
folio batch. The function waits for writeback to a folio, but then
proceeds to the rest of the batch without trying to write that folio
again. This patch fixes has it attempt to write the folio again.

[DH: Also remove an 'else' that adding a goto makes redundant]

Fixes: acc8d858 ("afs: convert afs_writepages_region() to use filemap_get_folios_tag()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20230607204120.89416-2-vishal.moola@gmail.com/

Commit acc8d858 converted afs_writepages_region() to write back a
folio batch. If writeback needs rescheduling, the function exits without
dropping the references to the folios in fbatch. This patch fixes that.

[DH: Moved the added line before the _leave()]

Fixes: acc8d858 ("afs: convert afs_writepages_region() to use filemap_get_folios_tag()")
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20230607204120.89416-1-vishal.moola@gmail.com/

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers: three fairly obvious small ones and a
  large one in aacraid to add block queue completion mapping and fix a
  CPU offline hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
  scsi: target: core: Fix error path in target_setup_session()
  scsi: storvsc: Always set no_report_opcodes
  scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity

Pull ata fix from Damien Le Moal:

 - Avoid deadlocks on resume from sleep by delaying scsi rescan until
   the scsi device is also fully resumed.

* tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-scsi: Avoid deadlock on rescan after device resume

Pull parisc fix from Helge Deller:

 - Drop redundant register definitions to fix build with latest binutils

* tag 'parisc-for-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Delete redundant register definitions in <asm/assembly.h>

The error unrolling was leaving the VMAs detached in many cases and
leaving the locked_vm statistic altered, and skipping the unrolling
entirely in the case of the vma tree write failing.

Fix the error path by re-attaching the detached VMAs and adding the
necessary goto for the failed vma tree write, and fix the locked_vm
statistic by only updating after the vma tree write succeeds.

Fixes: 763ecb03 ("mm: remove the vma linked list")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the case of fast device addition/removal, it's possible that
hv_eject_device_work() can start to run before create_root_hv_pci_bus()
starts to run; as a result, the pci_get_domain_bus_and_slot() in
hv_eject_device_work() can return a 'pdev' of NULL, and
hv_eject_device_work() can remove the 'hpdev', and immediately send a
message PCI_EJECTION_COMPLETE to the host, and the host immediately
unassigns the PCI device from the guest; meanwhile,
create_root_hv_pci_bus() and the PCI device driver can be probing the
dead PCI device and reporting timeout errors.

Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
mutex before powering on the PCI bus in hv_pci_enter_d0(): when
hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
loaded, the PCI device driver's probe() function is already called in
create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
to call the PCI device driver's remove() function and remove the device
reliably; if the PCI device driver hasn't loaded yet, the function call
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
remove the PCI device reliably and the PCI device driver's probe()
function won't be called; if the PCI device driver's probe() is already
running (e.g., systemd-udev is loading the PCI device driver), it must
be holding the per-device lock, and after the probe() finishes and releases
the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
able to proceed to remove the device reliably.

Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-6-decui@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

This reverts commit d6af2ed2.

The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit d6af2ed2 is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().

The commit d6af2ed2 was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Hu <weh@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

The hpdev->state is never really useful. The only use in
hv_pci_eject_device() and hv_eject_device_work() is not really necessary.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-4-decui@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

When the host tries to remove a PCI device, the host first sends a
PCI_EJECT message to the guest, and the guest is supposed to gracefully
remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host;
the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to
the guest (when the guest receives this message, the device is already
unassigned from the guest) and the guest can do some final cleanup work;
if the guest fails to respond to the PCI_EJECT message within one minute,
the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and
removes the PCI device forcibly.

In the case of fast device addition/removal, it's possible that the PCI
device driver is still configuring MSI-X interrupts when the guest receives
the PCI_EJECT message; the channel callback calls hv_pci_eject_device(),
which sets hpdev->state to hv_pcichild_ejecting, and schedules a work
hv_eject_device_work(); if the PCI device driver is calling
pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the
while loop in hv_compose_msi_msg() due to the updated hpdev->state, and
leave data->chip_data with its default value of NULL; later, when the PCI
device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest
crashes in hv_arch_irq_unmask() due to data->chip_data being NULL.

Fix the issue by not testing hpdev->state in the while loop: when the
guest receives PCI_EJECT, the device is still assigned to the guest, and
the guest has one minute to finish the device removal gracefully. We don't
really need to (and we should not) test hpdev->state in the loop.

Fixes: de0aa7b2 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Since day 1 of the driver, there has been a race between
hv_pci_query_relations() and survey_child_resources(): during fast
device hotplug, hv_pci_query_relations() may error out due to
device-remove and the stack variable 'comp' is no longer valid;
however, pci_devices_present_work() -> survey_child_resources() ->
complete() may be running on another CPU and accessing the no-longer-valid
'comp'. Fix the race by flushing the workqueue before we exit from
hv_pci_query_relations().

Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().

However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.

Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>

State CPUHP_AP_HYPERV_ONLINE has been introduced to correctly sequence the
initialization of hyperv_pcpu_input_arg. Use this new state for Hyper-V
initialization so that hyperv_pcpu_input_arg is allocated early enough.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-2-git-send-email-mikelley@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

These commits

a494aef2 ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba421 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")

update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.

When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.

When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.

Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.

Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Pull staging driver fix from Greg KH:
 "Here is a single staging driver "fix" for 6.4-rc7. I've been sitting
  on it in my tree for many weeks as it is just a simple documentation
  update, with the hope that maybe some other staging driver fixes would
  need to be merged for 6.4-final, but that does not seem to be the
  case.

  So please, pull in this one documentation update so that Aaro doesn't
  get emails going forward that he can't do anything about"

* tag 'staging-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: octeon: delete my name from TODO contact

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes and new device
  ids for 6.4-rc7 to resolve some reported problems. Included in here
  are:

   - new USB serial device ids

   - USB gadget core fixes for long-dissussed problems

   - dwc3 bugfixes for reported issues.

   - typec driver fixes

   - thunderbolt driver fixes

  All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: core: Prevent soft_connect_store() race
  usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  usb: typec: Fix fast_role_swap_current show function
  usb: typec: ucsi: Fix command cancellation
  USB: dwc3: fix use-after-free on core driver unbind
  USB: dwc3: qcom: fix NULL-deref on suspend
  usb: dwc3: gadget: Reset num TRBs before giving back the request
  usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} error
  USB: serial: option: add Quectel EM061KGL series
  thunderbolt: Mask ring interrupt on Intel hardware as well
  thunderbolt: Do not touch CL state configuration during discovery
  thunderbolt: Increase DisplayPort Connection Manager handshake timeout
  thunderbolt: dma_test: Use correct value for absent rings when creating paths

Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.4-rc7 that resolve some
  reported problems:

   - lantiq serial driver irq fix

   - fsl_lpuart serial driver watermark fix

  Both of these have been in linux-next this week with no reported issues"

* tag 'tty-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
  serial: lantiq: add missing interrupt ack

We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:

arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined

Delete the duplicate definitions in <asm/assembly.h>.

Also delete the definition of gp, which isn't used anywhere.
Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Fix an OOB issue in the Mediatek mt8365 driver where arrays of clks
     are mismatched in size

   - Use the proper clk_ops for a few clks in the Mediatek mt8365 driver

   - Stop using abs() in clk_composite_determine_rate() because 64-bit
     math goes wrong on large unsigned long numbers that are subtracted
     and passed into abs()

   - Zero initialize a struct clk_init_data in clk-loongson2 to avoid
     stack junk confusing clk_hw_register()

   - Actually use a pointer to __iomem for writel() in
     pxa3xx_clk_update_accr() so we don't oops"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: pxa: fix NULL pointer dereference in pxa3xx_clk_update_accr
  clk: clk-loongson2: Zero init clk_init_data
  clk: mediatek: mt8365: Fix inverted topclk operations
  clk: composite: Fix handling of high clock rates
  clk: mediatek: mt8365: Fix index issue

This patch validate session id and tree id in compound request.
If first operation in the compound is SMB2 ECHO request, ksmbd bypass
session and tree validation. So work->sess and work->tcon could be NULL.
If secound request in the compound access work->sess or tcon, It cause
NULL pointer dereferecing error.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21165
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If
->NextCommand is bigger than Offset + Length of smb2 write, It will
allow oversized smb2 write length. It will cause OOB read in smb2_write.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21164
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

ksmbd is doing write access using vfs helpers. There are the cases that
mnt_want_write() is not called in vfs helper. This patch add missing
mnt_want_write() to ksmbd vfs functions.

Cc: stable@vger.kernel.org
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

->StructureSize2 indicates command payload size. ksmbd should validate
this size with rfc1002 length before accessing it.
This patch remove unneeded check and add the validation for this.

[    8.912583] BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message+0x12a/0xc50
[    8.913051] Read of size 2 at addr ffff88800ac7d92c by task kworker/0:0/7
...
[    8.914967] Call Trace:
[    8.915126]  <TASK>
[    8.915267]  dump_stack_lvl+0x33/0x50
[    8.915506]  print_report+0xcc/0x620
[    8.916558]  kasan_report+0xae/0xe0
[    8.917080]  kasan_check_range+0x35/0x1b0
[    8.917334]  ksmbd_smb2_check_message+0x12a/0xc50
[    8.917935]  ksmbd_verify_smb_message+0xae/0xd0
[    8.918223]  handle_ksmbd_work+0x192/0x820
[    8.918478]  process_one_work+0x419/0x760
[    8.918727]  worker_thread+0x2a2/0x6f0
[    8.919222]  kthread+0x187/0x1d0
[    8.919723]  ret_from_fork+0x1f/0x30
[    8.919954]  </TASK>

Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull drm fixes from Dave Airlie:
 "A bunch of misc fixes across the board.

  amdgpu is the usual bulk with a revert and other fixes, nouveau has a
  race fix that was causing a UAF that was hard hanging systems,
  otherwise some qaic, bridge and radeon.

  amdgpu:
   - GFX9 preemption fixes
   - Add missing radeon secondary PCI ID
   - vblflash fixes
   - SMU 13 fix
   - VCN 4.0 fix
   - Re-enable TOPDOWN flag for large BAR systems to fix regression
   - eDP fix
   - PSR hang fix
   - DPIA fix

  radeon:
   - fbdev client warning fix

  qaic:
   - leak fix
   - null ptr deref fix

  nouveau:
   - use-after-free caused by fence race fix
   - runtime pm fix
   - NULL ptr checks

  bridge:
   - ti-sn65dsi86: Avoid possible buffer overflow"

* tag 'drm-fixes-2023-06-17' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  nouveau: fix client work fence deletion race
  drm/amd/display: limit DPIA link rate to HBR3
  drm/amd/display: fix the system hang while disable PSR
  drm/amd/display: edp do not add non-edid timings
  Revert "drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar system"
  drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1
  drm/radeon: Disable outputs when releasing fbdev client
  drm/amd/pm: workaround for compute workload type on some skus
  drm/amd: Tighten permissions on VBIOS flashing attributes
  drm/amd: Make sure image is written to trigger VBIOS image update flow
  drm/amdgpu: add missing radeon secondary PCI ID
  drm/amdgpu: Implement gfx9 patch functions for resubmission
  drm/amdgpu: Modify indirect buffer packages for resubmission
  drm/amdgpu: Program gds backup address as zero if no gds allocated
  drm/nouveau: add nv_encoder pointer check for NULL
  drm/amdgpu: Reset CP_VMID_PREEMPT after trailing fence signaled
  drm/nouveau/dp: check for NULL nv_connector->native_mode
  drm/bridge: ti-sn65dsi86: Avoid possible buffer overflow
  drm/nouveau: don't detect DSM for non-NVIDIA device
  accel/qaic: Fix NULL pointer deref in qaic_destroy_drm_device()
  ...

In the same spirit as commit ca57f022 ("afs: Fix fileserver probe
RTT handling"), don't rule out using a vlserver just because there
haven't been enough packets yet to calculate a real rtt.  Always set the
server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt,
which is capped at 1 second.

This could lead to EDESTADDRREQ errors when accessing a cell for the
first time, even though the vl servers are known and have responded to a
probe.

Fixes: 1d4adfaf ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.htmlSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm-misc-fixes maybe in time for v6.4-rc7:
- qaic leak and null deref fix.
- Fix runtime pm in nouveau.
- Fix array overflow in ti-sn65dsi86 pwm chip handling.
- Assorted null check fixes in nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/641eb8a8-fbd7-90ad-0805-310b7fec9344@lankhorst.se

Pull btrfs fixes from David Sterba:
 "Two fixes for NOCOW files, a regression fix in scrub and an assertion
  fix:

   - NOCOW fixes:
      - keep length of iomap direct io request in case of a failure
      - properly pass mode of extent reference checking, this can break
        some cases for swapfile

   - fix error value confusion when scrubbing a stripe

   - convert assertion to a proper error handling when loading global
     roots, reported by syzbot"

* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: fix a return value overwrite in scrub_stripe()
  btrfs: do not ASSERT() on duplicated global roots
  btrfs: can_nocow_file_extent should pass down args->strict from callers
  btrfs: fix iomap_begin length for nocow writes

Pull block fix from Jens Axboe:
 "Just a single fix for blk-cg stats flushing"

* tag 'block-6.4-2023-06-15' of git://git.kernel.dk/linux:
  blk-cgroup: Flush stats before releasing blkcg_gq

Pull io_uring fixes from Jens Axboe:
 "A fix for sendmsg with CMSG, and the followup fix discussed for
  avoiding touching task->worker_private after the worker has started
  exiting"

* tag 'io_uring-6.4-2023-06-15' of git://git.kernel.dk/linux:
  io_uring/io-wq: clear current->worker_private on exit
  io_uring/net: save msghdr->msg_control for retries

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes. The only change to the core code is for a
  minor race in ALSA OSS sequencer, and the rest are all device-specific
  fixes (regression fixes and a usual quirk)"

* tag 'sound-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback
  ALSA: usb-audio: Fix broken resume due to UAC3 power state
  ALSA: seq: oss: Fix racy open/close of MIDI devices
  ASoC: tegra: Fix Master Volume Control
  ALSA: hda/realtek: Add a quirk for Compaq N14JP6
  firmware: cs_dsp: Log correct region name in bin error messages