This patch will report the tx/rx checksum cap for raw qp via the
query device results.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Convert kmalloc to be kmalloc_array to fix warnings below:

WARNING: Prefer kmalloc_array over kmalloc with multiply
+               qp->sq.wrid = kmalloc(qp->sq.wqe_cnt * sizeof(u64),

WARNING: Prefer kmalloc_array over kmalloc with multiply
+               qp->rq.wrid = kmalloc(qp->rq.wqe_cnt * sizeof(u64),

WARNING: Prefer kmalloc_array over kmalloc with multiply
+               srq->wrid = kmalloc(srq->msrq.max * sizeof(u64),
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Failure in kmalloc memory allocations will throw a warning about it.
Such warnings are not needed anymore, since in commit 0ef2f05c
("IB/mlx4: Use vmalloc for WR buffers when needed"), fallback mechanism
from kmalloc() to __vmalloc() was added.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In order to ensure IB spec atomic correctness in atomic operations, if
HW is configured to host endianness, advertise IB_ATOMIC_HCA.  if not,
advertise IB_ATOMIC_NONE.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

HW is capable of 2 requestor endianness modes for standard 8 Bytes
atomic: BE (0x0) and host endianness (0x1). Read the supported modes
from hca atomic capabilities and configure HW to host endianness mode if
supported.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The cxgb3_*_send() functions return NET_XMIT_ values, which are
positive integers values. So don't treat positive return values
as an error.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Enhances the t4_dev_status_page to pass the qid start and size
attributes from iw_cxgb4 to libcxgb4.
Bump the ABI Version to 3 -> To allow libcxgb4 to detect old drivers and
revert to the old way of computing the qid ranges.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

It was found that when a process was rapidly sending MADs other processes could
be hung in their unregister calls.

This would happen when process A was injecting packets fast enough that the
single threaded workqueue was never exiting ib_mad_completion_handler.
Therefore when process B called flush_workqueue via the unregister call it
would hang until process A stopped sending MADs.

The fix is to periodically reschedule ib_mad_completion_handler after
processing a large number of completions.  The number of completions chosen was
decided based on the defaults for the recv queue size.  However, it was kept
fixed such that increasing those queue sizes would not adversely affect
fairness in the future.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add support of cross-channel functionality to mlx5
driver. This includes ability to ignore overrun for CQ
which intended for cross-channel, export device capability and
configure the QP to be sync master/slave queues.

The cross-channel enabled QP supports combination of
three possible properties:
* WQE processing on the receive queue of this QP
* WQE processing on the send queue of this QP
* WQE are supported on the send queue
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The cross-channel feature allows to execute WQEs that involve
synchronization of I/O operations’ on different QPs.

This capability enables to program complex flows with a single
function call, hereby significantly reducing overhead associated
with I/O processing.

Cross-channel operations support is indicated by HCA capability
information.

The queue pairs can be configured to work as a “sync master queue”
or “sync slave queues”.

The added flags are:

1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the
   devices that can perform cross-channel operations.

2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun
   check. This check is useless in cross-channel scenario.

3. QP property flags to indicate if queues are slave or master:
   * IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests
     will not be executed immediately and requires enabling.
   * IB_QP_CREATE_MANAGED_RECV indicates that posted receive work
     requests will not be executed immediately and requires enabling.
   * IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel
     mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are
     not provided, this QP will be sync master queue, else it will be sync
     slave.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Modify enum ib_device_cap_flags such that other patches which add new
enum values pass strict checkpatch.pl checks.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In order to read the HCA's current cycles register, we need
to map it to user-space. Add support to map this register
via mmap command.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pass hca_core_clock_offset to user-space is mandatory in order to
let the user-space read the free-running clock register from the
right offset in the memory mapped page.
Passing this value is done by changing the vendor's command
and response of init_ucontext to be in extensible form.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Reporting the hca_core_clock (in kHZ) and the timestamp_mask in
query_device extended verb. timestamp_mask is used by users in order
to know what is the valid range of the raw timestamps, while
hca_core_clock reports the clock frequency that is used for
timestamps.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Extending core and vendor verb commands require us to check that the
unknown part of the user's given command is all zeros.
Adding ib_is_udata_cleared in order to do so.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In order to create a CQ that supports timestamp, mlx5 needs to
support the extended create CQ command with the timestamp flag.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Check if the extended counters are available and if so
create the proper extended and additional counters.
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add the attr_id on port_table_attribute since we will have to add
a different port_table_attribute for the extended attribute soon.
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Create a new function to retrieve performance management
data from the existing code in get_pma_counter().
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The driver was written originally by Roland Dreier, currently there's
no official maintainer. Yishai steps in as maintainer.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Roland Dreier <roland@kernel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Matan and Leon step in as co-maintainers to replace Eli Cohen
who wrote and maintained the core and IB drivers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

And simplify the calling convention for full-memory registrations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Just pass and address/size pair instead of an ib_phys_buf array.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Fold simplified versions of build_phys_page_list and
iwch_register_phys_mem into iwch_get_dma_wr now that no other callers
are left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

We have stopped using phys MRs in the kernel a while ago, so let's
remove all the cruft used to implement them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This functionality has no users and was only supported by the staged out
EHCA driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Just IB_DEVICE_LOCAL_DMA_LKEY and IB_DEVICE_MEM_MGT_EXTENSIONS for now
as I'm most familar with those.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Code cleanup to move multicast specific code that checks for
a sendonly join to ipoib_multicast.c. This allows the removal
of the export of __ipoib_mcast_find().
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Code cleanup to remove multicast specific code from ipoib_main.c

The removal of a list of multicast groups occurs in three places.
Create a new function ipoib_mcast_remove_list(). Use this new
function in ipoib_main.c too.
That in turn allows the dropping of two functions that were
exported from ipoib_multicast.c for expiration of mc groups.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Advertise RoCE support for IB/core layer and set the hardware to
work in RoCE mode.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Set the address handle and QP address path fields according to the
link layer type (IB/Eth).
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

These callbacks write into the mlx5 RoCE address table.
Upon del_gid we write a zero'd GID.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When handling a responder completion, if the link layer is Ethernet,
set the work completion network_hdr_type field according to CQE's
info and the IB_WC_WITH_NETWORK_HDR_TYPE flag.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Using the vport access functions to retrieve the Ethernet
specific information and return this information in
ib_query_device and ib_query_port.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Introduce access functions to query NIC vport system_image_guid,
node_guid and qkey_viol_cntr.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

A mlx5 Ethernet port must be explicitly enabled for RoCE.
When RoCE is not enabled on the port, the NIC will refuse to create
QPs attached to it and incoming RoCE packets will be considered by the
NIC as plain Ethernet packets.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>