Move the render_client hunk for require_exist alongside the rest.
Keeping all the reasons why an existing object is needed, in a single
place makes it easier to follow.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Commit 508108ea ("drm/vmwgfx: Don't refcount command-buffer managed
resource lookups during command buffer validation") slips in use of
deprecated PTR_RET. Use PTR_ERR_OR_ZERO instead.

As the PTR_ERR_OR_ZERO is a bit longer than PTR_RET, we introduce
local variable ret for proper indentation and line-length limits.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

The load/unload callbacks in struct drm_driver are deprecated. Remove
them and call functions explicitly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

With memory encryption active, the hypervisor typically can't read the
guest memory using the HB port, since it is encrypted using a key known
only to the guest. In that case fall back to processing 4 bytes at a time
using the ordinary backdoor port.
The other option would be to use unencrypted bounce buffers for the
hypervisor to read out from or write into, but given the limited message
sizes it appears more efficient to just fall back to the ordinary backdoor
port.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

Final drm/i915 features for v5.6:
- DP MST fixes (José)
- Fix intel_bw_state memory leak (Pankaj Bharadiya)
- Switch context id allocation to xarray (Tvrtko)
- ICL/EHL/TGL workarounds (Matt Roper, Tvrtko)
- Debugfs for LMEM details (Lukasz Fiedorowicz)
- Prefer platform acronyms over codenames in symbols (Lucas)
- Tiled and port sync mode fixes for fbdev and DP (Manasi)
- DSI panel and backlight enable GPIO fixes (Hans de Goede)
- Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen)
- Plane alignment and dimension check fixes (Imre)
- Fix state checks for PSR (José)
- Remove ICL+ clock gating programming (José)
- Static checker fixes around bool usage (Ma Feng)
- Bring back tests for self-contained headers in i915 (Masahiro Yamada)
- Fix DP MST disable sequence (Ville)
- Start converting i915 to the new drm device based logging macros (Wambui Karuga)
- Add DSI VBT I2C sequence execution (Vivek Kasireddy)
- Start using function pointers and ops structs in uc code (Michal)
- Fix PMU names to not use colons or dashes (Tvrtko)
- TGL media decompression support (DK, Imre)
- Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld)
- Create dumb buffers in LMEM where available (Ram)
- Extend mmap support for LMEM (Abdiel)
- Selftest updates (Chris)
- Hack bump up CDCLK on TGL to avoid underruns (Stan)
- Use intel_encoder and intel_connector more instead of drm counterparts (Ville)
- Build error fixes (Zhang Xiaoxu)
- Fixes related to GPU and engine initialization/resume (Chris)
- Support for prefaulting discontiguous objects (Abdiel)
- Support discontiguous LMEM object maps (Chris)
- Various GEM and GT improvements and fixes (Chris)
- Merge pinctrl dependencies branch for the DSI GPIO updates (Jani)
- Backmerge drm-next for new logging macros (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com

- Rewrite of the ACR (formerly "secure boot") code, both to support
Turing, support multiple FW revisions, and to make life easier when
having to debug HW/FW bring-up in the future
- Support for TU10x graphics engine, TU11x not available yet as FW isn't ready
- Proper page 'kind' mappings for Turing
- 10-bit LUT support
- GP10B (Tegra) fixes
- Misc other fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5GKasg9-hEUwp9+aHVJg+nbQ0LukXyudgj6=YKu96jWQ@mail.gmail.com

Mediatek DRM Next for Linux 5.6

This fix non-smooth cursor problem, add cmdq support, add ctm property
support and some refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578972526.14594.8.camel@mtksdaap41

drm/tegra: Changes for v5.6-rc1

This contains a small set of mostly fixes and some minor improvements.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

ACR is responsible for managing the firmware for LS (Low Secure) falcons,
this was previously handled in the driver by SECBOOT.

This rewrite started from some test code that attempted to replicate the
procedure RM uses in order to debug early Turing ACR firmwares that were
provided by NVIDIA for development.

Compared with SECBOOT, the code is structured into more individual steps,
with the aim of making the process easier to follow/debug, whilst making
it possible to support newer firmware versions that may have a different
binary format or API interface.

The HS (High Secure) binary(s) are now booted earlier in device init, to
match the behaviour of RM, whereas SECBOOT would delay this until we try
to boot the first LS falcon.

There's also additional debugging features available, with the intention
of making it easier to solve issues during FW/HW bring-up in the future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We perform memory allocations long before we hit the code in SECBOOT that
would unlock the VPR, which could potentially result in memory allocation
within the locked region.

Run the scrubber binary right after VRAM init to ensure we don't.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

When the PMU/SEC2 LS FWs have booted, they'll send a message to the host
with various information, including the configuration of message/command
queues that are available.

Move the handling for this to the relevant subdevs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We always want at least requested size, make anything less a more direct
error condition.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This moves the code to generate commands for the ACR unit of the PMU/SEC2 LS
firmwares to those subdevs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Takes the command queue pointer directly instead of requiring a function to
lookup based on an queue type, as well as an explicit timeout value.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is to allow for proper separation of the LS interface code from the
queue handling code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Functions implementing FW commands had to implement this themselves, let's
move that to common code and plumb the return code from callbacks through.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.

Arbitrary private data passed to callbacks is to allow for something other
than struct nvkm_msgqueue to be passed into the callback (like the pointer
to the subdev itself, for example), and the return code will be used where
we'd like to detect failure from synchronous messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.

This is an incremental step towards that goal.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.

This is an incremental step towards that goal.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Code to interface with LS firmwares is being moved to the subdevs where it
belongs, rather than living in the common falcon code.

This is an incremental step towards that goal.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

To make things clearer while modifying the interfaces, split msgqueue into
Queue Manager, Command Queue, and Message Queue.

There should be no code changes here, these will be done incrementally.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>