- 30 Oct, 2014 2 commits
-
-
Qu Wenruo authored
commit 12b894cb upstream. btrfs-transacion:5657 [stack snip] btrfs_bio_map() btrfs_bio_counter_inc_blocked() percpu_counter_inc(&fs_info->bio_counter) ###bio_counter > 0(A) __btrfs_bio_map() btrfs_dev_replace_lock() mutex_lock(dev_replace->lock) ###wait mutex(B) btrfs:32612 [stack snip] btrfs_dev_replace_start() btrfs_dev_replace_lock() mutex_lock(dev_replace->lock) ###hold mutex(B) btrfs_dev_replace_finishing() btrfs_rm_dev_replace_blocked() wait until percpu_counter_sum == 0 ###wait on bio_counter(A) This bug can be triggered quite easily by the following test script: http://pastebin.com/MQmb37Cy This patch will fix the ABBA problem by calling btrfs_dev_replace_unlock() before btrfs_rm_dev_replace_blocked(). The consistency of btrfs devices list and their superblocks is protected by device_list_mutex, not btrfs_dev_replace_lock/unlock(). So it is safe the move btrfs_dev_replace_unlock() before btrfs_rm_dev_replace_blocked(). Reported-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Sterba authored
commit 2fad4e83 upstream. The transaction thread may want to do more work, namely it pokes the cleaner ktread that will start processing uncleaned subvols. This can be triggered by user via the 'btrfs fi sync' command, otherwise there was a delay up to 30 seconds before the cleaner started to clean old snapshots. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
- 15 Oct, 2014 38 commits
-
-
Greg Kroah-Hartman authored
-
Bryan O'Donoghue authored
commit 1ede7dcc upstream. Quark X1000 contains two designware derived 8250 serial ports. Each port has a unique PCI configuration space consisting of BAR0:UART BAR1:DMA respectively. Unlike the standard 8250 the register width is 32 bits for RHR,IER etc The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a bitrate of up to about 2.76 megabits per second. This patch enables standard 8250 mode Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Yasuaki Ishimatsu authored
commit 33ead538 upstream. Commit 92d585ef ("numa: fix NULL pointer access and memory leak in unregister_one_node()") added kfree() of node struct in unregister_one_node(). But node struct is freed by node_device_release() which is called in unregister_node(). So by adding the kfree(), node struct is freed two times. While hot removing memory, the commit leads the following BUG_ON(): kernel BUG at mm/slub.c:3346! invalid opcode: 0000 [#1] SMP [...] Call Trace: [...] unregister_one_node [...] try_offline_node [...] remove_memory [...] acpi_memory_device_remove [...] acpi_bus_trim [...] acpi_bus_trim [...] acpi_device_hotplug [...] acpi_hotplug_work_fn [...] process_one_work [...] worker_thread [...] ? rescuer_thread [...] kthread [...] ? kthread_create_on_node [...] ret_from_fork [...] ? kthread_create_on_node This patch removes unnecessary kfree() from unregister_one_node(). Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Fixes: 92d585ef "numa: fix NULL pointer access and memory leak in unregister_one_node()" Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Cristian Stoica authored
commit 4451d494 upstream. buf_0 and buf_1 in caam_hash_state are not next to each other. Accessing buf_1 is incorrect from &buf_0 with an offset of only size_of(buf_0). The same issue is also with buflen_0 and buflen_1 Signed-off-by:
Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Felipe Balbi authored
commit 468bcc2a upstream. if we don't make sure to kill the timer, it could expire after we have already gated our clocks. That will trigger a Data Abort exception because we would try to access register while clock is gated. Fix that bug. Fixes 869c5978 (usb: musb: dsps: add support for suspend and resume) Tested-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Andreas Bomholtz authored
commit dee80ad1 upstream. Added the Seluxit ApS USB Serial Dongle to cp210x driver. Signed-off-by:
Andreas Bomholtz <andreas@seluxit.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Joe Savage authored
commit bfc2d7df upstream. Added support for Ketra N1 wireless interface, which uses the Silicon Labs' CP2104 USB to UART bridge with customized PID 8946. Signed-off-by:
Joe Savage <joe.savage@goketra.com> Signed-off-by:
-
Lu Baolu authored
commit ddbe1fca upstream. This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Hans de Goede authored
commit 710f1bf1 upstream. As most ASM1051 based devices, this one has unfixable issues with uas too. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit f9554a6b upstream. https://bbs.archlinux.org/viewtopic.php?pid=1457492Signed-off-by:
-
Hans de Goede authored
commit 734016b0 upstream. Besides the ASM1051 (*) needing sdev->no_report_opcodes = 1, it turns out that the JMicron JMS567 also needs it to work properly with uas (usb-storage always sets it). Since some of the scsi devs were not to keen on the idea to outrightly set sdev->no_report_opcodes = 1 for all uas devices, so add a quirk for this, and set it for the JMS567. *) Which has become a non-issue since we've completely blacklisted uas on the ASM1051 for other reasons Reported-and-tested-by:
Claudio Bizzarri <claudio.bizzarri@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 59307852 upstream. And set this quirk for the Seagate Expansion Desk (0bc2:2312), as that one seems to hang upon receiving an ATA_12 or ATA_16 command. https://bugzilla.kernel.org/show_bug.cgi?id=79511 https://bbs.archlinux.org/viewtopic.php?id=183190 While at it also add missing documentation for the u value for usb-storage quirks. Signed-off-by:
-
WANG Cong authored
[ Upstream commit 5301e3e1 ] We need to copy exts->type when committing the change, otherwise it would be always 0. This is a quick fix for -net and -stable, for net-next tcf_exts will be removed. Fixes: commit 33be6271 ("net_sched: act: use standard struct list_head") Reported-by:
Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit bdf6fa52 ] Currently association restarts do not take into consideration the state of the socket. When a restart happens, the current assocation simply transitions into established state. This creates a condition where a remote system, through a the restart procedure, may create a local association that is no way reachable by user. The conditions to trigger this are as follows: 1) Remote does not acknoledge some data causing data to remain outstanding. 2) Local application calls close() on the socket. Since data is still outstanding, the association is placed in SHUTDOWN_PENDING state. However, the socket is closed. 3) The remote tries to create a new association, triggering a restart on the local system. The association moves from SHUTDOWN_PENDING to ESTABLISHED. At this point, it is no longer reachable by any socket on the local system. This patch addresses the above situation by moving the newly ESTABLISHED association into SHUTDOWN-SENT state and bundling a SHUTDOWN after the COOKIE-ACK chunk. This way, the restarted associate immidiately enters the shutdown procedure and forces the termination of the unreachable association. Reported-by:
David Laight <David.Laight@aculab.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
KY Srinivasan authored
[ Upstream commit 3a67c9cc ] After the packet is successfully sent, we should not touch the packet as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. David, please queue this up for stable. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reported-by:
Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by:
-
Joe Lawrence authored
[ Upstream commit 47549650 ] When team_notify_peers and team_mcast_rejoin are called, they both reset their respective .count_pending atomic variable. Then when the actual worker function is executed, the variable is atomically decremented. This pattern introduces a potential race condition where the .count_pending rolls over and the worker function keeps rescheduling until .count_pending decrements to zero again: THREAD 1 THREAD 2 ======== ======== team_notify_peers(teamX) atomic_set count_pending = 1 schedule_delayed_work team_notify_peers(teamX) atomic_set count_pending = 1 team_notify_peers_work atomic_dec_and_test count_pending = 0 (return) schedule_delayed_work team_notify_peers_work atomic_dec_and_test count_pending = -1 schedule_delayed_work (repeat until count_pending = 0) Instead of assigning a new value to .count_pending, use atomic_add to tack-on the additional desired worker function invocations. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit e87474a6 ] Similar to commit bc23333b ("net: bcmgenet: fix bcmgenet_put_tx_csum()"), we need to return the skb pointer in case we had to reallocate the SKB headroom. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 3be07244 ] In xmit path, we build a flowi6 which will be used for the output route lookup. We are sending a GRE packet, neither IPv4 nor IPv6 encapsulated packet, thus the protocol should be IPPROTO_GRE. Fixes: c12b395a ("gre: Support GRE over IPv6") Reported-by:
Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
KY Srinivasan authored
[ Upstream commit dedb845d ] After the packet is successfully sent, we should not touch the skb as it may have been freed. This patch is based on the work done by Long Li <longli@microsoft.com>. In this version of the patch I have fixed issues pointed out by David. David, please queue this up for stable. Signed-off-by:
Long Li <longli@microsoft.com> Tested-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 705f1c86 ] Eric Dumazet noticed that all no-nonexthop or no-gateway routes which are already marked DST_HOST (e.g. input routes routes) will always be invalidated during sk_dst_check. Thus per-socket dst caching absolutely had no effect and early demuxing had no effect. Thus this patch removes rt6i_genid: fn_sernum already gets modified during add operations, so we only must ensure we mutate fn_sernum during ipv6 address remove operations. This is a fairly cost extensive operations, but address removal should not happen that often. Also our mtu update functions do the same and we heard no complains so far. xfrm policy changes also cause a call into fib6_flush_trees. Also plug a hole in rt6_info (no cacheline changes). I verified via tracing that this change has effect. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: YOSHIFUJI Hideaki <hideaki@yoshifuji.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 73d3fe6d ] In commit 8a29111c ("net: gro: allow to build full sized skb") I added a regression for linear skb that traditionally force GRO to use the frag_list fallback. Erez Shitrit found that at most two segments were aggregated and the "if (skb_gro_len(p) != pinfo->gso_size)" test was failing. This is because pinfo at this spot still points to the last skb in the chain, instead of the first one, where we find the correct gso_size information. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: 8a29111c ("net: gro: allow to build full sized skb") Reported-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Matan Barak authored
[ Upstream commit a91c772f ] Single port VFs are seen PCI wise on both ports of the PF (we don't have single port PFs with ConnectX). With this in mind, it's possible for virtualization tools to try and configure a single ported VF through the "wrong" PF port. To handle that, we use the PF driver mapping of single port VFs to NIC ports and adjust the port value before calling into the low level code that does the actual VF configuration Fixes: 449fc488 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Matan Barak authored
[ Upstream commit effa4bc4 ] When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3b ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by:
-
Soren Brinkmann authored
[ Upstream commit 9026968a ] This reverts commit 8ef29f8a. The driver core already calls pinctrl_get() and claims the default state. There is no need to replicate this in the driver. Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
-
Vlad Yasevich authored
[ Upstream commit 40b8fe45 ] In macvtap device delete and open calls can race and this causes a list curruption of the vlan queue_list. The race intself is triggered by the idr accessors that located the vlan device. The device is stored into and removed from the idr under both an rtnl and a mutex. However, when attempting to locate the device in idr, only a mutex is taken. As a result, once cpu perfoming a delete may take an rtnl and wait for the mutex, while another cput doing an open() will take the idr mutex first to fetch the device pointer and later take an rtnl to add a queue for the device which may have just gotten deleted. With this patch, we now hold the rtnl for the duration of the macvtap_open() call thus making sure that open will not race with delete. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit d61746b2 ] When we try to add an already existing tunnel, we don't return an error. Instead we continue and call ip_tunnel_update(). This means that we can change existing tunnels by adding the same tunnel multiple times. It is even possible to change the tunnel endpoints of the fallback device. We fix this by returning an error if we try to add an existing tunnel. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit b8c203b2 ] Currently we genarate a queueing route if we have matching policies but can not resolve the states and the sysctl xfrm_larval_drop is disabled. Here we assume that dst_output() is called to kill the queued packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating queueing routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: a0073fe1 ("xfrm: Add a state resolution packet queue") Reported-by:
Konstantinos Kolelis <k.kolelis@sirrix.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit f92ee619 ] Currently we genarate a blackhole route route whenever we have matching policies but can not resolve the states. Here we assume that dst_output() is called to kill the balckholed packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating blackhole routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: 2774c131 ("xfrm: Handle blackhole route creation via afinfo.") Reported-by:
-
Vlad Yasevich authored
[ Upstream commit 7d3083ee ] When receiving a vlan-tagged frame that still contains a vlan header, the length of the packet will be greater then MTU+ETH_HLEN since it will account of the extra vlan header. TG3 checks this for the case for 802.1Q, but not for 802.1ad. As a result, full sized 802.1ad frames get dropped by the card. Add a check for 802.1ad protocol when receving full sized frames. Suggested-by:
Prashant Sreedharan <prashant@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 476c1885 ] TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 07d92d5c ] Since commit 412ca155 ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by:
Thibaut Collet <thibaut.collet@6wind.com> Suggested-by:
-
Francesco Ruggeri authored
[ Upstream commit 0d0162e7 ] I cannot move a macvlan interface created on top of a bonding interface to a different namespace: % ip netns add dummy0 % ip link add link bond0 mac0 type macvlan % ip link set mac0 netns dummy0 RTNETLINK answers: Invalid argument % The problem seems to be that commit f9399814 ("bonding: Don't allow bond devices to change network namespaces.") sets NETIF_F_NETNS_LOCAL on bonding interfaces, and commit 797f87f8 ("macvlan: fix netdev feature propagation from lower device") causes macvlan interfaces to inherit its features from the lower device. NETIF_F_NETNS_LOCAL should not be inherited from the lower device by a macvlan. Patch tested on 3.16. Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Acked-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit c095f248 ] As Toshiaki Makita pointed out, the BRIDGE_INPUT_SKB_CB will not be initialized in br_should_learn() as that function is called only from br_handle_local_finish(). That is an input handler for link-local ethernet traffic so it perfectly correct to check br->vlan_enabled here. Reported-by: Toshiaki Makita<toshiaki.makita1@gmail.com> Fixes: 20adfa1a bridge: Check if vlan filtering is enabled only once. Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 20adfa1a ] The bridge code checks if vlan filtering is enabled on both ingress and egress. When the state flip happens, it is possible for the bridge to currently be forwarding packets and forwarding behavior becomes non-deterministic. Bridge may drop packets on some interfaces, but not others. This patch solves this by caching the filtered state of the packet into skb_cb on ingress. The skb_cb is guaranteed to not be over-written between the time packet entres bridge forwarding path and the time it leaves it. On egress, we can then check the cached state to see if we need to apply filtering information. Signed-off-by:
-
Eric Dumazet authored
[ No appicable upstream commit, this bug has been subsequently been fixed as a side effect of other changes. ] If kmemdup() fails, we free fp->orig_prog and return -ENOMEM sk_attach_filter() -> sk_filter_uncharge(sk, fp) -> sk_filter_release(fp) -> call_rcu(&fp->rcu, sk_filter_release_rcu) -> sk_filter_release_rcu() -> sk_release_orig_filter() fprog = fp->orig_prog; // not NULL, but points to freed memory kfree(fprog->filter); // use after free, potential corruption kfree(fprog); // double free or corruption Note: This was fixed in 3.17+ with commit 278571ba ("net: filter: simplify socket charging") Found by AddressSanitizer Signed-off-by:Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 9a72c2da ] The problem is that the slave is first linked and slave_cnt is incremented afterwards leading to a div by zero in the modes that use it as a modulus. What happens is that in bond_start_xmit() bond_has_slaves() is used to evaluate further transmission and it becomes true after the slave is linked in, but when slave_cnt is used in the xmit path it is still 0, so fetch it once and transmit based on that. Since it is used only in round-robin and XOR modes, the fix is only for them. Thanks to Eric Dumazet for pointing out the fault in my first try to fix this. Call trace (took it out of net-next kernel, but it's the same with net): [46934.330038] divide error: 0000 [#1] SMP [46934.330041] Modules linked in: bonding(O) 9p fscache snd_hda_codec_generic crct10dif_pclmul [46934.330041] bond0: Enslaving eth1 as an active interface with an up link [46934.330051] ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi floppy [last unloaded: bonding] [46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G O 3.17.0-rc4+ #27 [46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti: ffff88005b728000 [46934.330059] RIP: 0010:[<ffffffffa0198c33>] [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330060] RSP: 0018:ffff88005b72b7f8 EFLAGS: 00010246 [46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX: 000000000000002a [46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI: ffff88004b077940 [46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09: ffff88004a83e000 [46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12: ffff88004b3f0500 [46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15: ffff88004b077940 [46934.330063] FS: 00007fbd91a4c740(0000) GS:ffff88005f080000(0000) knlGS:0000000000000000 [46934.330064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4: 00000000000406e0 [46934.330069] Stack: [46934.330071] ffffffff811e6169 00000000e772fa05 ffff88004b077000 ffff88004b3f0500 [46934.330072] ffffffff81d17d18 000000000000002a 0000000000000000 ffff88005b72b8a0 [46934.330073] ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4 ffff88005b302000 [46934.330073] Call Trace: [46934.330077] [<ffffffff811e6169>] ? __kmalloc_node_track_caller+0x119/0x300 [46934.330084] [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410 [46934.330086] [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90 [46934.330088] [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590 [46934.330089] [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20 [46934.330090] [<ffffffff8168f022>] arp_xmit+0x22/0x60 [46934.330091] [<ffffffff8168f090>] arp_send.part.16+0x30/0x40 [46934.330092] [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0 [46934.330094] [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0 [46934.330096] [<ffffffff8162875a>] neigh_probe+0x4a/0x70 [46934.330097] [<ffffffff8162979c>] __neigh_event_send+0xac/0x230 [46934.330098] [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220 [46934.330100] [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0 [46934.330101] [<ffffffff81660478>] ip_finish_output+0x1f8/0x860 [46934.330102] [<ffffffff81661f08>] ip_output+0x58/0x90 [46934.330103] [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0 [46934.330104] [<ffffffff81661640>] ip_local_out_sk+0x30/0x40 [46934.330105] [<ffffffff81662a66>] ip_send_skb+0x16/0x50 [46934.330106] [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40 [46934.330107] [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30 [46934.330110] [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60 [46934.330111] [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0 [46934.330113] [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0 [46934.330114] [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0 [46934.330115] bond0: Adding slave eth2 [46934.330116] [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0 [46934.330118] [<ffffffff81603248>] ? move_addr_to_kernel.part.20+0x28/0x80 [46934.330121] [<ffffffff811b4477>] ? might_fault+0x47/0x50 [46934.330122] [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0 [46934.330125] [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530 [46934.330127] [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50 [46934.330129] [<ffffffff81242b38>] ? fsnotify+0x238/0x310 [46934.330130] [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90 [46934.330131] [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20 [46934.330134] [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b [46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9 1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c 89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00 [46934.330146] RIP [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330146] RSP <ffff88005b72b7f8> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> Fixes: 278b2083 ("bonding: initial RCU conversion") Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit de185ab4 ] It is possible that the interface is already gone after joining the list of anycast on this interface as we don't hold a refcount for the device, in this case we are safe to ignore the error. What's more important, for API compatibility we should not change this behavior for applications even if it were correct. Fixes: commit a9ed4a29 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast") Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit eed4d839 ] Use dst_entry held by sk_dst_get() to retrieve tunnel's PMTU. The dst_mtu(__sk_dst_get(tunnel->sock)) call was racy. __sk_dst_get() could return NULL if tunnel->sock->sk_dst_cache was reset just before the call, thus making dst_mtu() dereference a NULL pointer: [ 1937.661598] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 1937.664005] IP: [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] PGD daf0c067 PUD d9f93067 PMD 0 [ 1937.664005] Oops: 0000 [#1] SMP [ 1937.664005] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables udp_tunnel pppoe pppox ppp_generic slhc deflate ctr twofish_generic twofish_x86_64_3way xts lrw gf128mul glue_helper twofish_x86_64 twofish_common blowfish_generic blowfish_x86_64 blowfish_common des_generic cbc xcbc rmd160 sha512_generic hmac crypto_null af_key xfrm_algo 8021q garp bridge stp llc tun atmtcp clip atm ext3 mbcache jbd iTCO_wdt coretemp kvm_intel iTCO_vendor_support kvm pcspkr evdev ehci_pci lpc_ich mfd_core i5400_edac edac_core i5k_amb shpchp button processor thermal_sys xfs crc32c_generic libcrc32c dm_mod usbhid sg hid sr_mod sd_mod cdrom crc_t10dif crct10dif_common ata_generic ahci ata_piix tg3 libahci libata uhci_hcd ptp ehci_hcd pps_core usbcore scsi_mod libphy usb_common [last unloaded: l2tp_core] [ 1937.664005] CPU: 0 PID: 10022 Comm: l2tpstress Tainted: G O 3.17.0-rc1 #1 [ 1937.664005] Hardware name: HP ProLiant DL160 G5, BIOS O12 08/22/2008 [ 1937.664005] task: ffff8800d8fda790 ti: ffff8800c43c4000 task.ti: ffff8800c43c4000 [ 1937.664005] RIP: 0010:[<ffffffffa049db88>] [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] RSP: 0018:ffff8800c43c7de8 EFLAGS: 00010282 [ 1937.664005] RAX: ffff8800da8a7240 RBX: ffff8800d8c64600 RCX: 000001c325a137b5 [ 1937.664005] RDX: 8c6318c6318c6320 RSI: 000000000000010c RDI: 0000000000000000 [ 1937.664005] RBP: ffff8800c43c7ea8 R08: 0000000000000000 R09: 0000000000000000 [ 1937.664005] R10: ffffffffa048e2c0 R11: ffff8800d8c64600 R12: ffff8800ca7a5000 [ 1937.664005] R13: ffff8800c439bf40 R14: 000000000000000c R15: 0000000000000009 [ 1937.664005] FS: 00007fd7f610f700(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 [ 1937.664005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1937.664005] CR2: 0000000000000020 CR3: 00000000d9d75000 CR4: 00000000000027e0 [ 1937.664005] Stack: [ 1937.664005] ffffffffa049da80 ffff8800d8fda790 000000000000005b ffff880000000009 [ 1937.664005] ffff8800daf3f200 0000000000000003 ffff8800c43c7e48 ffffffff81109b57 [ 1937.664005] ffffffff81109b0e ffffffff8114c566 0000000000000000 0000000000000000 [ 1937.664005] Call Trace: [ 1937.664005] [<ffffffffa049da80>] ? pppol2tp_connect+0x235/0x41e [l2tp_ppp] [ 1937.664005] [<ffffffff81109b57>] ? might_fault+0x9e/0xa5 [ 1937.664005] [<ffffffff81109b0e>] ? might_fault+0x55/0xa5 [ 1937.664005] [<ffffffff8114c566>] ? rcu_read_unlock+0x1c/0x26 [ 1937.664005] [<ffffffff81309196>] SYSC_connect+0x87/0xb1 [ 1937.664005] [<ffffffff813e56f7>] ? sysret_check+0x1b/0x56 [ 1937.664005] [<ffffffff8107590d>] ? trace_hardirqs_on_caller+0x145/0x1a1 [ 1937.664005] [<ffffffff81213dee>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1937.664005] [<ffffffff8114c262>] ? spin_lock+0x9/0xb [ 1937.664005] [<ffffffff813092b4>] SyS_connect+0x9/0xb [ 1937.664005] [<ffffffff813e56d2>] system_call_fastpath+0x16/0x1b [ 1937.664005] Code: 10 2a 84 81 e8 65 76 bd e0 65 ff 0c 25 10 bb 00 00 4d 85 ed 74 37 48 8b 85 60 ff ff ff 48 8b 80 88 01 00 00 48 8b b8 10 02 00 00 <48> 8b 47 20 ff 50 20 85 c0 74 0f 83 e8 28 89 83 10 01 00 00 89 [ 1937.664005] RIP [<ffffffffa049db88>] pppol2tp_connect+0x33d/0x41e [l2tp_ppp] [ 1937.664005] RSP <ffff8800c43c7de8> [ 1937.664005] CR2: 0000000000000020 [ 1939.559375] ---[ end trace 82d44500f28f8708 ]--- Fixes: f34c4a35 ("l2tp: take PMTU from tunnel UDP socket") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Acked-by:
-
